Profit Center on Condition Types for Taxes

We have a billing document whose pricing procedure included two condition types for billing. A single material was delivered and billed but the two line items for the taxes were posted to different profit centers. Where did the difference could have come from?

Hi
Tell me in which version you are in?. What are the account assignments for those condition types?. Do you have multiple sales accounts for that entry?.
Jayaram

Similar Messages

Create a new condition type for tax... and assign in the Tax determniation

Hi,
I need to add custom condition tax type, i tried creating the condition in OBQ1 and add that condtion in FI pricing OBQ3, now I want to confirm what is basic conept means whenever we create on condtion in OQB1 and add in OBQ3.
i need to add that in Sales order and need to maunally populate that in the sales order.
could anybody suggest to create a new condition type for tax.(full process).
Thanks
shankar

Hi,
Goto the T.Code "V/06".Create one new "Z" condition type.
Maintain the Condition Class as "D(Taxes)".
Calculation type as "A(percentage)".
Cond. Category as "D(Tax)".
Select the tick mark for "Group Condition" if it is applicable for you.
In the next step assign this condition type to your pricing procedure by using the T.Code "V/08".
Also maintain access sequence by using the T.Code "V/07" and assign it to your Condition type.
Now this condition type will appeared in your sales order after maintain teh condition records.
Regards,
Krishna.

VK11 Condition types for taxes

Hey, I'm attaching the print screen of Vk11 for taxes. I don't understand what is the use of taxcode(highlighted) on the image. I have seen F1, but it doesn't make any sense to me.... I'm putting the tax rate % in the amount field... What is the use of Region? Is it the region of a customer? Any help is appreciated.
Thanks

Aasish, Thanks for the reply. In the Taxes on Purchases/Sales, I have configured 2 tax codes (O1 & O2). O1 has taxes Excise duty, Cess & VAT, whereas O2 has Excise, Cess & CST).
Now configuring condition type for tax VAT using VK11 using key combination Plan/Region/Delivery PLant REgion/ etc, I have entered the tax code as O1.
What is Tax code acting as here? I know it is not retrieving any tax rates mentioned in Taxes on Sales/Purhases section as I have maintained same Account Keys in both the areas but condition types are different....
If I am defining condition type for Excise, what is the tax code I have mention here.. Will it be O1 or O2?
Thanks

Condition types for Tax

Hi,
   I have included a Condition Type CTX1 for tax in Canada. It does not show up in my order, even though it has not been marked manual or statistical.
Can you tell me what i need to do so that i get to see the actual value being taxed from my base price?
Thanks and Regards,
   Aditya

the informatin wqht you provided is inadequate anyways taking granted that you have maintained condition records for that cond type as you are sayin it is a tax condition type you need to maintain the appropriate indicators to get that condtype in your order like ,. tax indicator for customer master record and material mster record and not only that u should do tax determinatin and then in your condtion records maintain tax with appropriat tax codes hope thos tax codes are given by FI pepole.
   and as the above guy mentioned u can eaily do analysis in sales order by go to item level conditions .......bottom analsis and check for ur cond type on left hand side and then read the message on right hand side.
revert back nay further,.

New condition type, new tax codes

Hi,
I have created new condition type for tax procedure TAXIN. I have defined the account key for it. The condition type is basically for exempted input tax transaction. Then I created new tax codes by using the new condition type. The percentage of the tax codes is 0 as it is exempted.
When I am trying to post invoice by using above taxcodes, it gives me error that the tax code is not defined in taxprocedure TAXIN.
What could be the reason?

Did you create the tax code in the development or prouction system?
If in development you need to export the tax code by going to FTXP and selecting Tax Code -> Transport -> Export. Then when you release the transport you should go to the Production system and select Tax Code -> Transport -> Import.

Condition types in Taxes, MM and SD

Hi Experts,
There are different kinds of condition types For Taxes( t.code obq1), MM (m/06) and SD( v/06). how are these condition types are useful. please explain the difference among these condition types.
Regards,
babu

Hi Babu,
         Vendor purchasing price is made up of with differenct pricing elements. Ex . Material basic prices , freight charges , discount etc. To reprsent each element different condition types are used in MM pricing procedure.
         In the similar manner for Finishe goods selling prices is made up of diffeent price elements. Ex. Finished goods basic price , frieght charges, discoutn etc , To reprsent each element different condition types are used in SD pricing procedure.
          The total tax amont also is made up of with diffrent tax elements or different taxes are there. Ex input tax , out put tax , basic tax , surcharge , education cess etc. To represent these taxes various condition types are used in Tax procedure..
Hope its clear........
Regds
Chandra

In sales order for the condition type MWST, **Tax code** is displaying wron

Hi
In sales order for the condition type MWST, *Tax code* is displaying wrongly at header level i.e. FF instead of AO (under account determination tab)
AO tax is 0% but for FF it is 19%
I have checked with the Access sequence it is picking access 08 correctly according to this it should show AO in tax code field for MWST but it is not so..
There is a manual change for tax classification for material master in va02 initially it was blank now it is changed to ' 0 ' is any way influencing....?
Even if I consider material tax classification and customer tax code should not be FF because tax code FF is not maintained for the combination of access sequences for condition type MWST
Please help me.
Rajendra Prasad

Dear Rajendra,
There is a manual change for tax classification for material master in va02 initially it was blank now it is changed to ' 0 ' is any way influencing....?
Definitely material Tax classification will influence to determine the Tax code.
-->So Make sure that customer and material master having proper tax classification indicator.
-->Have you Update the price after changing the tax classification in the sales order.by going to item dat -->condition tab then click on Update push button bottom of the conditions screen.
-->Once again the check the condition record maintanence also for your MWST access sequence.
I hope this will help you,
Regards,
Murali.

Condition types for works tax, SDT,MANDI TAX

Hi All,
are there any condition types for the following:
Mandi Tax,
other taxes(any other taxes)
state development taxes,
works tax
entry tax
it is required to create condition types and put in pricing schema in po or these condition types are defined in tax code and are copied in pricing procedure.
thanks and regards

thanks for giving your valuable time,
We are on ECC 6.0, and these conditions are not appearing in the condition table. I could not go thru these conditions. I referred the SAP NOTE NO 9552289, validity since 8.1.2007 where in the attachment of TAXINN with screen shot is there.
Further clarification
In the forum it was mentioned JVRD - VAT Non deductible and JVCS - CST deductible, is it a typing error. My writing is not for pointing you as wrong, but for taking the understanding.
I appreciate your knowledge and great understanding on subject.
regards

Condition Records For Tax Condition types for SAP 4.7

Dear Experts,
What is the procedure to maintain condition records for tax condition types like CST , VAT and Service Tax. We are not using CIN. In MM01 and XD02 tax classifications i have maintained UTXJ condition Type and also maintained the above mention tax condition types.. But when i create condition records for UTXJ in VK11 the sysytem is asking for Tax code. In FTXP when i defined Tax code A1 for Tax ProcedureTAXIN1 where i maintained all the Tax condition types there.But i am unable to save the Tax % in FTXP.When i try to save the tax code it is not saving.
Is there any other procedure to maintain Tax condition types for SAP4.7.
My Pricing procedure that i maintained in V/08 is Z00001.
Regards
Jyoti

Hi Jyoti
Since you are not using CIN, you can do the follwing for tax conditions
Check the assignment of the TAx procedure to country
once u do this , you will be able to maintin the vendor and customer records for MWST type for taxes
then create condition records for MWSt with access sequence MWST in condiution type or design one suited to your needs
alternatevely in the current procedure you can change access sequence for condition type UTXJ form the current one to MWST and then maintain condition records
hope this helps
thanks
Akasha

Condition types for service tax

Hi,
We are configuring the system for TAXINN.
Which condition types to be usd for service tax, ECess on service tax and HECess on service tax?
are their any standard condition types for it or we need to create those?
Regards,

Hi,
For Deductible;
JSRT     IN:A/P Service Tax %
JEC3     IN: A/P ECS for ST %
JES3     IN:A/P SECess on ST
For Non-deductible; (Copy of Above with A/c Key "NVV")
ZSRT     IN:A/P Service Tax %
ZEC3     IN: A/P ECS for ST %
ZES3     IN:A/P SECess on ST

Condition Type for PO Input Tax

Good day!
I have created a PO but the Input tax does not appear in the Condition tab. I want to change the condition type code but it is not editable. How will I be able to change the condition types for my PO?
Thank you.

HI,
The conditions type defined in the pricing procedure will come over during the pricing calculation while creating PO,
If you want to change the condition type you got to do it in the pricing procedure.
Thanks & Regards,
Kiran

Profit center an optional entry for Movement Type

Hi All,
I have the need to make changes on the Field Status for the Movement Type 561 to set profit center to be an optional entry.
Right now when I go to MB1C and enter the movement type and the plant, it asks for a profit center since its a req entry. I want to change that to optional. Please help.
Thanks
RFico

Hi
1. Go to SE38 - Program RM07CUFA
2. Enter Movement Type 561 - GL Account as your stock account
3. Execute
4. It will show you 2 columns - Field Status as per MM and FI
5. Make Profit center as optional there for MM...
6. Pr Ctr as optional for FI can be made from OBC4
Regards
Ajay M

Which Access sequence will use for sales tax condition type for TAXINN

hi.,
which Access sequence will use for sales tax condition type for TAXINN procedure.pls give one example (Access sequence) and give fields.
Because i couldnot create the condition record,the system not accepted for tax indicator.
Regards.,
lakshmanan

We also got the same problem with our client and escalated it to SAP.
they advised to use the access sequence JIND which consists of condition tables in the order given below
Step Condn Table
10 354
20 355
30 40
Attach this to your condition types.
Rewards if it helps.
Regards,
Anbu

Error message FF762 " Condition type MWVS tax code A8 does not extist- MIRO

Dear all,
after support packagesi mplemented , I've the problem with transaction MIRO,
because I cannot released the invoic for the folloqiong error:
FF762 " Condition type MWVS tax code A8 does not extist.
Please, could you help me.
Thanks in advance for your cooperation
Gaetano

Hi,
Go to FTXP and give the tax code A8.
In the resultant screen, select the condition type MWVS, and link the condition type to an account key.
Make sure all the other tax determination settings are fine
Now, try the transaction it should work fine.
Hope this helps you

Condition type MWST tax code A1 does not exist

Hi all,
I'm facing the problem while I'm releasing Billing doc to Accounting. This is the error
Condition type MWST tax code A1 does not exist
Message no. FF762
Diagnosis
When calculating tax, the system tried to determine the condition amount and the condition number from tables A003 and A053 using the specified condition type and tax code. However, no values were found there.
System Response
The specified amount cannot be posted in FI.
Procedure
Check the Customizing settings for the specified tax code. Check whether the validity period (possible with tax jurisdictions) is defined.
I have already checked FTXP, and the Tax Code is already there.
I have already checked the condition record, and it is already there,
Maybe I have missed something...?
Thanks before for all your help
Regards,
Rizki Harris

Hi Typewriter,
1. Check in a previously created invoice, accounting document - the tax code? (FB03) is it A1?
   --> the tax code is A1
2. In VK12, MWST do you have other values of % tax (e.g. 0%). In a sales order, give appropriate Tax classification values for CMR, MMR so that MWST value = 0. Create invoice and check if you are getting the message
   --> in VK12 for Key Combination Domestic Taxes :
        TaxCl1Cust   TaxCl.Mat     Name                                 Amount     Valid from    Valid To         Tax Code
        0                    1                  Tax Exempt Full Tax                          25.07.2011   31.12.9999    A0
        1                    0                  Liable For Taxe No Tax                        01.01.2008   31.12.9999    A1
        1                    1                  Liable forTaxeFull Tax              10       25.07.2008 31.12.9999    A1
     --> I still don't understand what do you mean by CMR, MMR ?
3. Condition type MWST is not allowed to be processed manually..
Regards,
Rizki Harris

Profit Center on Condition Types for Taxes

Similar Messages

Maybe you are looking for