Profit centerwise Vendor and Customer line items view

Deal ALL,
We have not activated Business Area.
We have 10 plant under one company code. Client is booking the vendor and customer invoice as per the cost center and profit center of the plant. Payment and Receipt is also made according the bank maintain for each plant. As one customer or vendor is dealing with all the plants.
Can any body can help me out how to get the vendor and customer line item display according plant or cost or profit center wise, so we can make or receive payment accordingly.
Request you all to reply.
Thanks & Regards,
Bhadresh

Hi
Try the transaction codes for Profit Display by suitable config in TCode O7F1, O7F2, O7F3
Assign Points if useful
Regards
Sanil

Similar Messages

  • Profit Center population in the Vendor and Customer Line items

    hello
    our client is asking for  getting profit center in the vendor and customer line items  where in the view FBL5n and fbl1n we are not getting the profit center populated - in the new gl i understand that there is a standard report based on the gl account.
    but our business is not satisfied with the report and expecting report at profit center level.
    Can any one suggest any way of doing this.
    regards,
    Vijay

    Dear Vijay,
    Let me provide you my view of solutioning for this. This is an enahcement that needs to be done
    1. You can get the profit center from the given vendor and customer line item at the time of posting, using an enahcement you will be able to capture it.
    2. Existing the profit center field is not populated in the BSIK,BSAK,BSID and BSAD tables
    3. Hence, in the same enhancement once you capture the profit center , you can write the code that profit center is updated in these tables also.
    4. This will help you to do the vendor line item wise selection in the FBL1N,  FBL5N profit center wise.
    Constraints of this solution:
    The only constraint remains where in the for a given document if there are multiple profit center, then the system will do the splitting profit center wise for a vendor line item, which will not populate the profit center in those tables as there is only one field available in the bsid etc.. tables.
    This basically would be the one the soltuion where in as seeen from the end user ther eis no change in the front end interface , the way they are doing always they can do.
    You need to also take care the % of document splitting means cross profit center postings /cross document splitting charactericstics postings and the volume involved in this. so that you can suggest this to your client.
    Regards,
    Bharathi.

  • Profit centre needs to be updated in Vendor and Customer line item reports

    We are using ECC 6. 
    Profit centre is updating for vendor and customer line items in document level.  But the same is to be reflected/updated in profit centre field in FBL1N and Reports.

    hi
    Use this T codes you will get Profit center wise  S_AC0_52000888 Paybles (vendor balances )
    Tcode for Profit center wise receviables S_AC0_52000887  (customer balances )
    Regards
    Babu.k

  • FI Open Vendor and Customer Line item

    Dear Experts,
    Do we have to migrate the Tax code in the Vendor and Customer Line Items during data migration?
    I read somewhere that is it not necessary to do so.
    Please advise.
    Thank you.

    Hi ,
         It depends on the legal enviroment and sometimes on the settings used in your system. It is a matter of whether the Tax code information is needed in any circumstance that could arise subsequent to migration.
    Examples where you must migrate the tax codes:-
         i) Deferred VAT is used.
         ii) Prepayments with Gross Display.
        iii) Prompt payment discounts are VAT relevant.
    Kind regards

  • Profit Centre updation in Vendor or Customer Line item

    Dear All,
    With the concept of New GL, system is configured with profit centre and business area mandatory fields. after posting the document in MIRO and VF01 system is not able to capture the Profit Centre in the vendor or customer line item in " Entry View" where as in  "General Ledger Veiw" PC is capturing properly.
    Business area field is updating in the both the veiws.
    Due to this we could not able to take the vendor or customer line item in the t code FBL1n / 3n. is there config setting missig or else system is behavior correct.
    if sytem is behaving correct in this case how to take the vendor or customer line item with respective profit centre wise.
    Thanks in Advance,
    Sahil. K

    First of all go to SE37 and copy the function module SAMPLE_INTERFACE_00001650 and make a Z one out of it .
    Then code your requirement playing aorund with the structure RFPOS .
    Then Go to FIBF - Settings - Products - Of a customer . Here make a new entry with a Z one of yours as per your convinience .
    Again go to settings - P/S modules - Of customer - Entere here the BTE 1650 and the product that you have created and enter the fucntion module name that you have made the codings in .
    Save the entries .
    Also , in the FM you can keep a break point and check what is the effect that is coming out in the Structure RFPOS after the FM is executed .
    May take the help of an ABAPER for the same .

  • T.code required for Vendor line item display and Customer line item display

    Hi Gurus,
    Pl provide me transaction code for "Vendor line item display and " Customer line item display apart from FBL1n for vendor and FBL5n for customers.
    Kindly advise.
    Regards,
    Samar

    Hi,
    You could use these, for example:
    S_ALR_87012103 - List of Vendor Line Items
    S_ALR_87012197 - List of Customer Line Items
    Just curious: what's wrong with FBL1(5)N?
    Regards,
    Eli

  • RE: COPA report and customer line item report not matching

    Hi All,
    COPA report and customer line item reports (fd10n) are not matching please let me know the reason.

    ok

  • Profit Center required for Customer line items

    Hi Gurus,
    Can we make Profir center filed mandatory to customer/vendor line items in New GL

    Hi
    When you activated New GL Functionality and made Profit Centre Update is mandatory.
    At new GL side system will automatically take about updation of profit centre for customers and verdor line items.
    Regards.
    Chandrasekhar Ponugumati

  • LSMW upload for Vendor and Customer Open items

    Hi Experts,
    1. I wanted to use to use LSMW to upload through FB60 for Vendor Invoices through recording, but the problem is Amount in Document Currency is 'USD' and Amount in Local Currency is 'INR'. While recording it is not allowing to input values in Amount in Local Currency while my upload file has values in both Amount in document currency as well as Amount in Local currency. Any help with this regards?
    2. Do i need to open the all fiscal years which are there in upload file?
    3. Any better option to upload the Balances with LSMW?
    Any useful information will be Highly appreciated.
    Thanks in Advance

    Hi Rajkumar,
    To upload Open items of Vendor and Customers, in LSMW, you will have two files header and line items with  a link linking both the files.
    Now, Suppose if you have to enter an amount in USD, then in the header file, enter USD in the currency field and give Exchange rate also in the header file and give the exact exchange rate which should be the value of your Amount in Local Currency INR.
    In such cases, you do not enter directly the amount in local currency field.. It is a calculated figure..
    Yes, depending on the posting date, all those fiscal years need to e open for which you are posting the data.
    LSMW is a tried and tested method for uploading open items.. Simple Go Ahead...
    Regards,
    SAPFICO

  • Cheque Number in Vendor and GL Line iTem Display

    Hi
    How can we get to display the Cheque Number in T Codes FBL1N and FBL5N
    Samir

    Hi
    Please follow the paths
    GL Accounts:
    IMG ==> General Leder Accounting ==> Master Data ==> GL Accounts ==> Line Items ==> Define Special Fields for Line Item Disply
    Enter Table PAYR
    Field Name CHECF
    Vendor Accounts
    IMG ==> Accounts Receivable and Accounts Payable ==> Vendor Accounts ==> Line Items ==> Display Line items ==> Define Additional Fields for Line Item Display
    Enter Table PAYR
    Field Name CHECF
    After adding this, when you run FBL1N and FBL3N you can see the cheque number against payment documents.
    Thanks & Best Regards
    Sanil K Bhandari

  • How can i clear the vendor and customer open line items at a time same vendor as a customer of the company (same vendor same customer and equal invoices )

    my vendor and customer are same . purchase invoice due100000 and sales invoice amount is also 100000 at a time with any manual action , have any setting for cleared both vendor and customer line items at a time ...........

    X Ltd. will be Vendor & Customer.
    Purchase Invoice is booked under Vendor SAP number & Sales Invoice is booked under Customer SAP number. Then you can transfer amount from Vendor to Customer or vice versa with T-code F-04.
    Then if you have transferred amount from customer to Vendor (F-04), Vendor account will have two entries Debit & Credit. Then go for clearance with T-code F-44 clear Vendor.

  • Unable to update profit center or plant code in the customer line item

    Hi,
    We require the profit center and plant code and division in FI
    documents (Posted through billing document or through direct FI entry)
    We are unable to input plant or profit center in the customer line item
    while using F-21 or any other FI transaction
    The plant and profit center is not appearing even in customer line item
    in RV document (From SD billing)
    We have made the Field status group as optional for the reconcilation
    accounts.
    Regards
    Sembian

    Hi
    Profit center / cost center are generally entered in revenue & expense line items (P&L items). Customer / vendor master and line items are balance sheet items which will not show profit / cost centers.
    Regards
    Neeraj

  • Field Status for Vendor Line item or Customer line item

    Hi
    Can i need to check the Field status for Vendor or Customer Line item when i use the transaction codes F-43 or F-22. This is very urgent.
    Regards

    Hi Vinay,
    You cannot check the Field Status directly when posting a document. The Field Status is controlled by the Field Status group. This is controlled at 3 levels, the company code level, G/L Master level and at the Posting key level. Field status at the posting key level overwrites other groups. It is basically to control which fiedls need to be supressed, which are required and which are optional.
    In FS00 under the create/bank/interest tab you will find the field group. Check the Recon account assigned to your vendor/customer master and check the field status in FS00.
    Regards
    Sridhar

  • VENDOR and Customer master Authorization

    Hi Experts
    I have requirement about vendor & customer master authorization.client requirement is if  a user had created vendor  or customer under a purchase organization or sales organization so in this case other Purchase org users shouldn't see any details about this vendor and even they shouldn't be allowed to post to this invoices.even in FBL1N and FBL5N user shouldn't see other region vendor or customer line items.how to handle to this can any one help me on this.
    Thanks in advance
    Regards
    Diwa

    Hi,
    Just a thought;
    Why can't you create a user specific validation for FB60 or other t.codes if wanted, which says that;
    If the condition 'Vendor code starts with say 1* series', is met;
    then display an error message 'Posting not possible for this Vendor Group XXXX'
    This way, you can prevent certain users from posting transactions to a certain vendor groups.
    Thanks,
    Nirav

  • Profit Center for Vendor/Customer line item in F-02

    hi all,
    We have implemented SAP ECC 6.
    At the time of vendor line item posting, there is no input field for profit center.
    Can anyone please tell the way out for Profit Center field pop up in case of t-code like f-02 for vendors & customers
    Abhishek

    Please note the following:
    - On FBL5N and alike customer/vendor line item reports you won't find
    the field profit center filled; hence you can't directly input it during document entry (as pre-mentioned)
    and the profit center for customer/vendor gets inherited (as of document splitting functionality) from the document other line item(s) (according to the defined document splitting rules...)
    - Yet you can use the below reports (with New G/L.) to get the customer/vendor line items wise reporting over a profit center (i.e. unlike FBL5N & showing the inherited customer/vendor profit center in the G/L. view)
    S_AC0_52000887 - Line Items->Open Items->Receivables: Profit Center
    S_AC0_52000888- Line Items->Open Items->Payables: Profit Center
    In both reports you can use:
    "Custom Selections" -Dynamic Selections Icon- enabling you to filter the output according to
    a. Customer line items specific data entered within the posted document(s)
    b. General ledger items of the G/L. view of the posted document(s)
    & the "Output type" includes like most of the New G/L. Reports:
    - Graphical report output
    - Classical drill-down report
    - Object list (more than one lead column)

Maybe you are looking for

  • Missing Line Items and '?' Symbols in some Reports

    I have upgraded the patch level of my production server and patch level list is given below SAP_BASIS 640 0022 SAPKB64022 SAP_ABA 640 0022 SAPKA64022 ST-PI 003C_640 0001 SAPKITLPS1 PI_BASIS 2006_1_6400006 SAPKIPYL06 SAP_BW 350 0021 SAPKW35021 SAP_HR

  • Mac won't boot up if external hard drive is on

    I just purchased an external hard drive to use for my Time Machine backups. The "installation" instructions said that with the computer off, to power up the e.h.d., then power up the computer. Well, the computer is evidently trying to boot up from th

  • Add Supported Channels Airport extreme Macbook Pro 15' late 2010

    My wireless network at school recently added another router under our classroom. The channel for this connection is channel 13 which is not supported under the default supported channel settings. I was wondering if there is way to add or change these

  • Photo Gallery Module- is not responsive

    Hi there, I have been using the business catalyst for a few sites but I have noticed that the photo gallery module isn't responsive and when you look at the gallery on a phone it doesn't adjust to fit the screen. Is there anything that can be done ab

  • RoboHelp reordered my linked FM files

    I have a RoboHelp project that is linked to a FrameMaker book. I have been having problems with the linking - I make changes to the FM files and update the RoboHelp project but the changes don't always take effect - so I shut down both programs. I op