Profit Centre Error in VA01

Hi Friends,  i am facing problem with profit centre when i am creating sales order through VA01.  Generally, as u know, it should pick profit centre from substitution or from material master . but it was not doing that instead it is picking some profit centre. i  am not able to understand from where it was picking that profit centre. 
       if any body have an idea from where VA01 will pick profit centre,pls let me know.   i am giving following  initial inputs.
    order type          Z1FD
    sales org            LCSO
   distribution chnl    DI
   division                01
    sales office          10
sales group             10E

Hello all,
I have exactly the same problem. I have implemented new general ledger and controlling with PCA and the inheritance of profit centre has been established by segment.
When I try to acquire an asset using the transaction F-90, the system deliver the same error.
I can not understand the problem, because with other operations the system works properly, but in this case the system do not bring the cost centre from the asset.
I have tested all things from this forum and nothing fix the problem.
Could you help me with this??
Thanks in advance.

Similar Messages

  • Profit centre error while vendor rebate settlement

    Hi
    this is regarding vendor rebate settlement TC- MEB4.
    while settlement of agreement, system is not able to determine the profit centre, hence unable to post the entries. in this regards, i have checked following:-
    1. material used in rebate agreement - profit centre maintained
    2. field status of all GL used in settlement process is optional for profit centre and cost centre
    3. in document splitting, categories of the GL's are Balance Sheet Item and Revenue
    4. field status of the posting key also open for profit centre
    5. document type is defined as Unspecified posting in splitting
    do i need to look some other place for possible cause of error? please revert
    Regards
    DD

    If you have mainatained the Rebate as accrual based on agreement adn Sales conditions then you should use Item Category as "01300-Cash Discount Clearing".
    Change and try in atest system and while changing the category read the warning message carefully that the system issues and understand the implications.

  • Profit centre error in J1INPR

    Dear All,
    When executing J1INPR during a particular period, I am getting the following error in the second screen.
    "Balancing field profit center for line item 001 is not filled"
    i have checked note 1063850.
    but there i am not able to trace out in which field i need to input the correct profit centre.
    As the prctr field is not recognized by sytem which is suggested in the note.
    Also if i try to populate in bseg-prctr the same is overwritten as soon as the cursor comes out of BTE mentioned in the note.
    Your help will be highly appreciated.
    thanks & Regards
    Ronak

    Dear,
    If you find it difficult to map profit centers through BTEs and substitution then do one thing,, use transation FAGL3KEH and enter the profit center for the TDS provision account and at the month end you can allocate this amount to diffrent profit centers thorugh distribution etc.....demonstrate this process to your business users and take the decision you like....
    REgards,
    Chintan Joshi

  • Profit centre error

    hi
    when doing goods inward getting
    error: profit centrer xxx doesnt exist for 3.12.2007.
    we assigned prifit centre in material but showing  error with other proft center doesnt exist.
    plz give me solution urgent,
    advance thanks,
    reddy

    Hi
    The Profit center you are using may not be valid on that date.
    Check the Vlaidity period of the Profit center in KE53.
    If the date 03.12.2007 does not fall in the Validity period,Create the Profit center again in that Validity period including this date. in KE51
    Thanks & Regards
    Kishore

  • Profit centre

    Hi SAP Experts,
    I have activated document splitting and done the relevant config.under different nodes. But when i am doing transactions profit centre is not getting updated in the second line item.
    Its behaving like without document splitting manner. But when I am doing MIGO profit centre error is coming.
    What could be the reason.. pls provide me solution.
    Thanks and regards,
    padmaja

    Hi Padmaja,
    Hope ur seing the document in the General Ledger View. The splitting effect will be only seen there.
    regards,
    Kiran

  • Error in profit centre document

    Hi All,
    We have created a billing doc. corresponding accounting document, profit centre document are getting generated.
    But if we look at the profit centre doc no values are found and it is a blank completely.
    Can any explain us what is the cause resulting profit centre document generation with out any value in it?
    Babs.

    Hi,
    I have received the following error message.
    Balancing field "Profit Center" in line item 001 not filled
    Message no. GLT2201
    Diagnosis
    The field Profit Center marked as balancing is not filled with any value in line item 001, even after document splitting.
    System Response
    The document cannot be posted.
    Procedure
    First check your entries.
    Additional causes could be:
    No value can be derived for this field from the current document data.
    You have entered a document type that is not designed for this business purpose.
    Procedure for System Administration
    Customizing

  • Need Profit centre field as mandatory field in the sales order

    Dear All,
    Normally Profit center data maintained in the material master, same data will get coipied to the sales order while creating sales order in VA01 transaction.
    My requirement is if profit center data is not maintained/available in the sales order system should give the error message
    For this I need Profit center field as mandatory field in the sales order(VA01).
    Can you please give possibilities ASAP.
    Give the SHD0 maintenance step by step.
    Regards,
    Murali.

    Hi Murali
    I beleive that you are talking about the Profit centre field not maintined in sales order hence not picked in delivery and billing and there is an FI posting error  (GL account error) because of that
    Profit centre is maintained in MMR and the same flows thro the sales cycle and i am quite sure if maintained in MMR it will be picked automatically and no need to make it mandatory in sales order( as the purpose is already solved)
    But there is no standard option in SAP like (even if Account assignment category of the material is not maintained in MMR it can be given in VF02 and the document can be released for accounting) to give the Profit centre in the billing and release the same
    Profit centre field field is picked from masters and flows in the entire flow and that field is greyed out (like no option of inserting it inbetween)
    As told by others incompletion log in sales doc type will take care for future orders and for the already created orders the standard option is cancel billing, reverse delivery and open the sales order and give   Profit centre field and process it (if only a few orders are there)
    But if the already created orders are many then from the FI Area  you need to go for development ( we also faced this issue as profit center not maintained in MMRs and hence accounting got hit and there were tons of billing docs and our FI consultant made some development to open it and solve it) FI consultant should be able to do this for already created orders
    Instead of making Profit centre field as mandatory field in the sales order better make it a mandatory entry in MMR
    Regards
    Raja

  • Profit centre at storage location level

    Hi Experts,
    Can we define a profit centre @ storage location level?
    My scenario :
    The document splitting of FI is activated for the document type of FI and also the profit centre is mandatory entry for any accounting document that will be created so when I am trying to post a MIGO I encounter the error
    "Balancing field "Profit Center" in line item 001 not filled"
    We have a option of maintaining a profit centre in plant data/storage location but i will be updated in the profit centre field of Costing1 view . But we does not want to upadate in costing view of material master data.
    Basically We want the system to determine profit centre based on storage location  in Goods reciept transaction .
    Helpful Sugestions on this would be helpful & rewarded max .
    points.
    Regards,
    Patil
    t

    Hi Raju ,
    Thanx for the reply.I am Basavarajs Collougues.
    Our Enterprise Structure of our Client is as follows
    One company code is assigned to one plant and we have treated all the branches across India as Storage locations.Each  Branch (Storage Location- MM) is configured as Profit centres in FICO.The goods are procured for a storage location.
    By using the functionality of document splitting, the profit center field is made mandatory for all the accounting documents generated in the system. Now we are trying to post a goods receipt against a Purchase Order, the system is giving error "Balancing field "Profit Center" in line item 001 not filled"
    The option is there to maintain a profit center at the plant level.But we have several storage locations under the plant and each storage location has to be linked with the particular profit center. So that, while doing goods receipt the system should determine profit centre based on the storage location in purchase orders.
    Please suggest on this.
    Regards,
    SVU123

  • Profit centre problem in VF02

    I have created a material and maintained PC. I have created a sales order.  I have created the billing document.  while releasing billing document, system throwing error message - In line item 001 profit centre not filled. 
    I have checked the item details in vf03, there profit centre has been passed and displaying.
    I have checked the Doc. type RV, whether it is mentioned in doc. splitting or not. Maintained.
    I have checked the Customer recon a/c, whether it has maintained in Doc. splitting or not. Maintained.
    What might be the reason for error.

    Hi,
    I have received the following error message.
    Balancing field "Profit Center" in line item 001 not filled
    Message no. GLT2201
    Diagnosis
    The field Profit Center marked as balancing is not filled with any value in line item 001, even after document splitting.
    System Response
    The document cannot be posted.
    Procedure
    First check your entries.
    Additional causes could be:
    No value can be derived for this field from the current document data.
    You have entered a document type that is not designed for this business purpose.
    Procedure for System Administration
    Customizing

  • Profit centre derivation rule to derive profit centre based in Business plc

    Hi,
    We required "profit centre derivation rule to derive profit centre based in Business place + 9000 in such case were vendor & customers are involved and current profit center derivation logic doesnu2019t work."
    For this we have mapped a substitution pertaining to all co. codes based on all the relevant posting keys for Vendor and Customer where in system will replace the profit center based on business place given in line item as Business Place + 9000. For happening this we have written a User Exit and attached the same with this substitution through t.code OBBH. Entire hting we mapped in our testing client.
    But now the problem is whatever posting keys we have defined in our substitution are being used in normal payment and clearing also.
    Eg : In payment document vendor is debited vide posting key No 25. where the profit centre is derived based on the invoice that gets selected.
    In Normal Payment and clearing transactions, the profit centre is derived based on the profit center in offsetting line items (as per New GL Logic) currently.
    Now our business requires that where ever the system is unable to derive a profit centre for vendor and customer (And giving the error " Balancing field profit center in line item 001 not filled") transactions, then at that time profit center for that line item should replace with logic Business Place + 9000 (here business place is the business place contained by that line item in which error is coming for profit center.).
    How to map the same in the system through substitution / exit or any other method? Awaiting for your inputs pls. Thanks in advance.
    Tapan

    Still not answered.
    Requesting to give some clue for the same.
    Thanks & Regards,
    Tapan

  • Profit Centre in F-38 and F-55

    Hi
    Good day to you.
    In Statistical Posting in Vendor and Customer (T Codes F-38 and F-55), Profit Centre field is not available.
    We tried to achieve Posting to Profit Centre Field in F-38 by substituting the value entered in Assignment Field (ZUONR) into Profit Centre.
    The following is what we did:
    1. First we said If Company Code = "XXXX" then Substitute Profit Centre Field with value in Assignment Field.
       It worked fine for entries through TCode F-02 as well as F-38 (meaning the values in Assignment Field was substituted in Profit Centre Field.
    But since we wanted to restrict this Substitution to only the Transactions posted through F-38, the Prerequisite was changed to
    2. If Company Code = "XXXX" and Transaction Code = F-38, then Substitute Profit Centre Field with value in Assignment Field
    and posted a Transaction through F-02, Profit Centre Field is not substituted with Value in ZUONR.
    But strangely even for Transactions through Transaction Code F-38, Profit Centre Field is not substituted with Value in ZUONR.
    If anybody could throw light on why this prerequisite is not working and how to get around it.
    I would be really very grateful for all assistance in resolving this matter.
    Regards
    Siddique

    Do a test with the simulation on Substitutions
    From menu: Substitution / Simulate
    An other option is:
    Extras and use from there the trace.
    perhaps it is little type error in your substitution

  • Balancing field profit centre not filled

    Hi all,
    The transaction Iam trying to post in FI directly.
    The entry I am posting is
    Dr Cash 1000
    Cr Sales 500 PC X
    Cr Sales 500 PC Y
    I want the cash account to be split with PC X 500 and PC Y 500. I am getting the error. balancing field profit centre is not filled in line item 001.
    Can some one please guide. I have assigned cash account with item category 04000 and the document type Iam using is with unspecified category.
    Thanks
    Aravind

    Hi Vineet,
    Thanks for the reply. Let me summarise you what I have done.
    1. Document splitting is active in the system.
    2. Profit centre and segment scenarios are mandatory
    3. Zero balancing clearing account has been defined.
    4. Item category assigned to cash account is 04000.(Cash account)
    5. Item category assigned to sales account is 30000(Revenue)
    6. A new document has been created which is YV and is assigned with transaction variant 0000/0001.
    7. Inheritance check box ticked in level of detail.
    Please revert in case if further details are required.
    Thanks
    Aravind

  • Business area and profit centre field to make mandatory in all transactions

    Dear Team,
    My client wants to make the above mentioned fields mandatory while entering any business transactions. viz. MM,FI / SD transactions. He wants to capture the details Business area wise as well as Profit Centre wise.
    Please let me know whether
    1.  I need to make "Business Area" as well as "Profit Center" field mandatory in "ALL THE FIELD STATUS GROUPS"of particular field status varient. If not which particular field dtatus groups to use. &
    2.Whether "Profit Center" or "Cost Center" to make mandatory and to which GL.
    Please help.
    Waiting for your reply.
    Thanks and Regards
    Sagar

    Hi
    A good way to make this Check compulsory in case Document Splitting is active in your system.
    Follow the path
    IMG>Financial Accounting (New)>General Ledger Accounting (New)>Business Transactions>Document Splitting>Define Document Splitting Chracteristics for General Ledger Accounting.
    Here you can make splitting active for Both business Area and profit center.
    If any where in the posting system does not find either of Business Area or Profit Center, it would give an error
    Thanks & regards
    Sanil K Bhandari

  • Urgent plz!! partner profit centre derivation

    my company has 2 plants under one company code . one plant supplies one material type A to second plant .Both the plant have different profit centres.
    How to make the partner profit centre hit when i am doing an invoice posting in MIRO.
    I tried doing a derivation rule in 8kes , but the partner profit centre has to hit after matching the particular material no and the plant no .
    in the enhancement source text there is no field for plant where i could modify the source text .
    Moreover at the user exit in 8kes , after creating a breakpoint , it is not getting hit during MIRO .
    Plz help

    Hi Sunil ,
                    This is very much possible .
    Procedure :-
    generate the report ex fbl1n with any criterea.Before that check weather field profit center is there in Dynamic selections .
    Even after giving if it is not coming .then go to settings in fbl1n report and there click on special fields .
    New entries
    Table Name BSIS/BSID/BSIK
    Field Name  PRCTR
    Similarly  
    Table name  BSEG
    Field Name  PRCTR
    you save the changes
    if you find any error like field prctr already exist then no need to craete firld PRCTR for BSIS  but you need to create it for BSEG (form which these figures populate )
    then save .
    CAUTION: ypou may not find the changes until indexing takes place .
    so Wait fro some time for ex In some comanies indexing takes at night time . after that only you can see the changes .
    this way you can add some special fields .
    Hope this will cater.
    Thqanks and Regards,
    Sunil

  • "Balancing field "Profit Centre" in line items 001 not filled."

    Hi Gurus,
    When make an entry for asset acqisition it is throwing an error as
    "Balancing field "Profit Centre" in line items 001 not filled."
    pls let me know how to rectify this error.
    warm regards
    Manjunath

    Hi Kalyan,
    The following is already configured in the system but still we are getting the error
    Please help us solve the issue
    My gmail id is [email protected]
    If possible Please come online for chatting
    1  Classify GL a/c’s for Doc splitting
    Acct from  ,   Acct To       ,   Over ride   ,       Category  ,   Description
    300000     ,    300000      ,      No Tick          ,     7000    ,       FA
    2   Classify Document type for Doc splitting
    Type    ,    Desp      ,             Transaction   ,     Variant   ,         Desp                            Name
    AA    ,   Asset Posting   ,     0000              ,      0001     ,     Unspecified posting         Standard
    3  Define Zero balance clearing a/c
         There is an account assigned for the same
    4  Define Doc splitting characteristics for General ledger accounting
    Field                       ,              Zero balance       ,         Partner field  ,            Mandatory field
    PRCTR Profit centre       ,     Ticked               ,            Blank          ,               Ticked
    Warm regards
    Manjunath

Maybe you are looking for