Profit centre line item report after transfer

Dear All,
I have activated Document splitting. And it is working fine.
But when i take the report at profit centre level i am not able to see the Balance sheet line items.
Then i transferred the Balance sheet items to profit centre through customizing. Even now i cannot see line items but a consolidated figure which was transferred is appearing.
Is it correct or is there any way through which i can see the line items trasferred to the profit centre as period end activity.
Please help to resolve the issue
Sapfrido

done

Similar Messages

Profit center line item report

Hello All,
A sales order is created with reference to a service order, now when I see Profit center line items, the function area available in Service order is differ from the function area displaying with sales document number in profit center line item report. Can anyone please tell me where could be the problem.
Full points will be awarded for the answer.
Thanks & Regards
Srini

Hi,
what SAP release do you have ?
Normally the derivation of the functional area is made with the following logic:
1) manually entered
2) FI-Substitution (calling point 5 or 6 since ERP2004)
3) cost center
4) cost element
Please see also SAP note 106180 of how to correct wrong functional areas in PCA.
Best regards,
Andreas

Balancing field profit centre line item 001 not filled

Hi Guru's,
am facing payroll posting problem system throwing error as Balancing field in profit centre line item 001 not filled i have checked every thing is correctly maintained and please guide me where i have gone wrong and where exactly i get this line item to check please help me in solving my problem, as it is urgently required
thanks in advance
chaitra

Balancing field "Profit Center" in line item 001 not filled
Above error is coming due to splitting .Try to do the following process
First check the line item 001 and get the GL no for which GL you are getting the error.
Ask your FI persons, what is the default Profit Center for that company code.
Goto Tcode FAGL3KEH and enter the company code......enter GL code and Default profit center in the last column.
Before doing this check the Business Area in IT 0027 and IT0001.Make sure that same Business Area in these ITs.
Mohan

Data Target for info source 0EC_PCA_3 (Profit Centre Line Items)

I have brought info source 0EC_PCA_3 into my system from Business Content (Profit Centre Line Items) but I'm unable to find any update rules or the target for this info source?
Many thanks for your help.
Matt

Have you collected the object properly. I am please take the mentioned datasource and collect the object with dataflow before and afterwords in t-code RSORBCT. Cross check the collection for infocube, TR and UR and then start installation.
Regards
Pankaj

FF68 -Profit centre & Line items

Hi Experts,
I have a senario regarding posting through FF68.After giving required inputs in the first screen & second screen system will ask for profit centre as well as line items while running batch input.
please tell me how we can exclude this profit centre as well as line items from this mandatory field
Thanks in advance
Regards
Praveen

Hi
Is Document splitting functionality active in your landscape. If it is there, don't do the below the step
Goto Transaction Code:OT43. Select the varaint and double click and select the field and double click. it will be de-selected
Siva

Reposting Profit centre line items

Dear All,
Can someone please clarify if there is an option to repost the line items which were posted to wrong profit centre? We had posted some entries to wrong profit centre and we want to repost it to the correct profit centres. Please clarify if some option is available.
Regards
Suresh

Hi
You can use tcode 9KE0 , where in u can refer original doc no. also . you can enter wrong and right profit center using + , - signs .
assign points if useful
best regards
Venkat

Vendor line item report based on profit centre wise like FAGLL03

We have profit centre wise GL Line item report i.e FAGLL03. Is there any such report for vendor line items with profit centre.
I want to see open items of vendor for a particular profit centre.

Hi BSR,
I think there are some 'recherche' reports which should fulfill your needs.
Please call the transaction FGI0.
There you got the following folders.
002 Payables According to General Ledger Account Assignments
0SAPPAYABL01 Payables per Profit Center
0SAPPAYABL02 Payables per Segment
003 Receivables According to General Ledger Account Assignments
0SAPRECIEV01 Receivables per Profit Center
0SAPRECIEV02 Receivables per Segment
These reports should fulfill the need, to display items of vendors
or customer according to the NewG/L 'splitting criteria'.
With Best Regards,
Gladys Xing

Profit Center wise Vendor & Customer Line item report

Hi
We are on SAP ECC 6. Can I get Profit Center wise Vendor & Customer Line item report (as like FBL1N)
Regards
Sandeep

Hi,
Please Try using "S_ALR_87013343 - Profit Center: Receivables " and "S_ALR_87013344 - Profit Center: Payables"
Reports
Best Regards,
Ravi Reddy

Profit center - actual line items report

< MODERATOR: Message locked. Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. >
hi,
i am trying to excute ke5z, profit center actual line item report. it does not show any values even if i am running it wide open, I am testing this in our quality client, we have data all of 2008 posting to profit centers. i
is there some kind of config involved in this.
please let me know if anyone has an idea.
thanks.

Are you absolutely sure there are no values in any of the fields in selection screen? Recheck if any of the multiple selections (arrow at the end of each field) is active? Are you running it for record type 0 (actual) - you did say you are running it wide open, but I am just trying to reconfirm.
Just another think that you could check - when you are in the initial screen of KE5Z, go to Extras -> Data source (F5) from the top menu and make sure Database checkbox is checked.
Edited by: Srikanth Tamma on Sep 22, 2008 6:46 PM

Asset Balances & Cost Line items Report

Hi,
I am looking for a Report which would combine Asset (S_ALR_87011963)balance report and Cost line item Report(CJi3) for Projects.

Hi,
The flow is like this ( if u r using timesheets for confirmation):
CAT2 : Timesheet: Enter Times : User enters the time.
CATS_APPR_LITE : Approval of timesheet
CAT5 : Transfer to Projects.
This will post cost to Projects.
Another way of getting the Actual cost is Confirmation using CN25 or CN29.
Regards,

Vendor line item report in New GL

Hi
We have activated New GL. We need vendor line item report based on GL view. FBL1n provides report based on entry view. But we need simillar to FBL1n based on GL view. There is a standard report S_AC0_52000888 which provides vendor line item doucment wise with New GL characteristics such as profit center. However, this report does not provide additional information such as posting date, due date et.c which is available in FBL1n. Hence, we are unable to monitor vendor accounts at profit center level.
Can anyone suggest how to add additional fields in the above report or any other report available for the same.
Thanks
S.Radhakrishnan

hI
Thanks for the reply.
As per your suggestion, we need to bring GL view parameters from FAGL* tables. I need clarification here:
1. In our case, single line item in BSIK may correspond to multiple profit centers and hence multiple line items in FAGL* tables.
2. Users run the report for multiple vendors ( beig range) with their profit centers as selection criteria.
3. In the above case, we need to select all the line items for that vendor and go to FAGLFLEXA and select all line items and delete all line items not pertaining to the profit center entered as selection.
4. The above process would be time consuming since all the open items will be selected and then delete all those items which are not required.
5. Else, can we select the items from FAGLFLEXA directly for the profit centers entered and bring additional information from BSIK table. Since vendor accounts are not there in FAGLFLEXA, it would be cumbersome and time consuming.
6. Which of the above approach would you recommend.
7. Is it possible to modify the ACO report so that we can add additional information such as posting date, due date etc.
Regards
S.Radhakrishnan

Offsetting account in Vendor, Customer and GL line item report

Hi All,
There is one requirement from our client. They want offsetting account in Vendor, Customer and GL line item report.(FBL1n, FBL3n and FBL5n).
As this field is there in selection screen in lay out setting but field coming as blank no off setting account is coming. It was coming in old SAP 4.7 system but same is not coming in ECC6.0.
Kindly let me know if any development is requirement, if yes than which tables we have refer for the same.
Thanks and Regards,
Abhinav Sharma

Hi Abhinav,
There is a SAP not and you can refer to that - SAP OSS note 112312
T.Code: FIBF
After entering in above T.code
Follow Path
Settings  Products of a customer
Product   : XXXX
Text        : XXXX
Active     : Tick it
Click on Back i.e. F3
Follow Path
Settings >P/S Function Modules > of a customer
Event: 00001650
Product: XXXX
Function Module: LINE_ITEMS_GET_GKONT
Now Go to FBL3N display of any account
After opening the account display click on Change Layout i.e. CTRL+ F8
And Select
Offsetting A/C Type & Offsetting A/C no.
Regards,
SAPFICO
Edited by: SAPFICO on Dec 1, 2010 8:26 AM

Business Area wise Vendor & Customer Line item report

Hi
We are on SAP ECC 6. Can I get Business Area wise Vendor & Customer Line item report (as like FBL1N)
Regards
Debojyoti

Hi,
In FBL1N in dynamic selections you can give the business area as the selection parameter otherwise after execution of report with the help of layout you can set filters for business area.
Go to FAGLB03 give the vendor or customer reconciliation account along with business area. So after you execute the report you can choose vendor code and business area.
Check once it may help you
Regards,
Sankar

Adding fileds to customer line items report (RFITEMAR)

Hi all,
         I am modifying a customer line items report<b>(RFITEMAR).</b> I have to add two fields to a structure <b>(rfposxext).</b> I have completed this task. But the problem is how to populate these two fields. I am not able to find the select statements in this report to add these two fields. Any one can help me in this issue.....Thanks in advance

Hi Kalyan
In the include "RFITEM_INC",
Routine "reate_performance_tables" exists where they are assigning "fposxext" to a field-symbol.
Add you fields after:
        gd_pos_reduced-bukrs = <lfs_pos>-bukrs.
        gd_pos_reduced-belnr = <lfs_pos>-belnr.
        gd_pos_reduced-gjahr = <lfs_pos>-gjahr.
        gd_pos_reduced-buzei = <lfs_pos>-buzei.
        gd_pos_reduced-budat = <lfs_pos>-budat.
add:
        gd_pos_reduced-xxx = <lfs_pos>-xxx.
regards,
Dharitree

Current Header Rows Not Appearing on FBL1N - A/P Detailed Line Item Report

Our A/P staff somehow turned off the header rows at the top of the FBL1N report.    The rows contain the various variables related to the report such as vendor name, vendor address, city, state etc.
Does anyone know how I can change the report so that these variables once again appear on the report?
Thanks,

Michael,
Do you mean that you can not access via the following link?
http://service.sap.com/notes
Well, if this is your case, I will copy note 181592 here since there is only text information and not code correction. I am sorry but the format is not good, but I think this note will help you to insert header again.
If this note does not help you, let me know and I will check the other notes that I have provided.
Please kindly check the note text below:
Best Regards,
Vanessa Barth.
==============================================================
SAP Note No. 181592                          20.01.2009           Page 1
Number              181592
Version             6 from 03.03.2000
Status              Released for Customer
Set on              02.03.2000
Language            EN
Master language     DE
Short text          Line item: Setting-up the headers
Responsible         Christian Auth
Component           FI-GL-GL-D
                     Reporting/Analysis/Display
Long text
Symptom
You want to display information in the headers or change information
preset in the headers for the following: line item display for vendors,
G/L accounts customers or customer information on an account.
Additional key words
Program RFITEMAP, RFITEMGL, RFITEMAR, Transactions FBL1N, FBL3N, FBL5N,
layout variants, layout headers
Cause and prerequisites
You are not familiar with the option of individually setting header
information or how to use maintenance transactions.
Solution
1. Overview
     In the line item report you can display information in the header of
     the list (given that this information is equal for all items
     displayed).
     For example, a customer accounts clerk wants to display the
     following data in the header: account number and name of the
     customer, name and telephone number of the responsible accounting
     clerk for the customer, current date.
     You can use information taken from the account master data. General
     variables like the time and date are also available.
     The following describes how you can set up the layout of header
     information yourself. A header layout is always assigned to the
     particular display variant of the list which you set on the bottom
     of the selection screen or which you can choose using CTRL+F9 on the
     display ('Choose' button). You can therefore personalize the header
     layout as well as the remaining display layout.
     The header layout is output if the account number group is changed,
     if the list has been sorted according to the 'Account' field, and if
     a page break has been set for this field. You can maintain these
                                                                   Page 2
        settings under the menu option Edit -> Subtotal (Ctrl+F1).
     2. Setting up the headers
         Choose from the menu
         Settings -> Display Variant -> Current header rows
         You now see rows in which you can arrange variables. Using the
         pushbuttons in the function bar, you can create or delete rows.
         When you position the cursor at the start position and choose
         function "Gen. variables" (Shift+F5) or "Characteristics..."
         (Shift+F8) a new variable is positioned in the header area. From the
         following dialog box, you can choose the variable (also called
         characteristic) from an inventory.
         Under "Text type", you determine whether the label for the variable
         (for example, the label 'Customer') or if the value itself should be
         used (that is, the appropriate customer number for the items
         displayed in each case). You can display pairs as follows:
         <Label>: <Value>
         for example,
         Customer: 47110815
         If the value is a key for a short or long text (either a name or a
         description), you can also select this under "Text type".
         After selecting and positioning the characteristics, save and return
         to the list. The headers are displayed immediately with correct
         values so that you can check your results right away.
     3. Save the list variant
         Choose "Save" (Ctrl+F12) in the list. In the following dialog box,
         you can enter a name and a label for the list variant that will be
         stored together with your header layout.
         Note that general variants visible to every user have a name
                                                                       Page 3
       starting with the character '/'. User-specific variants on the other
       hand must begin with a letter and are only visible to you.
       Standard variants delivered by SAP in general start with a number
       and have preconfigured headers. You cannot change the SAP variants,
       but you can use them as template for your own enhancements, which
       you can store under another variant name.
   Valid releases
   Software Component                        Release
                                             from            to
   SAP_APPL
        SAP Application
                                             46C          - 46C
                                             46A          - 46B          X
   Further components
   FI-AP-AP-D
    Reporting/Analysis/Display
   FI-AR-AR-D
    Reporting/Display/Credit Management
   Reference to related Notes
   Number    Short text
   306225    Line item: page break when printing lists
   213144    Line item: Header information disappears
   181697    Line item: Header information is missing

Profit centre line item report after transfer

Similar Messages

Maybe you are looking for