Profit & Loss Query in oracle R12

hi
Anybody know that how to get profit and loss in oracle apps R12 and if any person have the Profit & Loss Query, so plz send me query.
Thanks
Zulqarnain

Hi Everyone,
Thks for your help.
@ Srini and John:
Yes, this happens to all the users connecting to the system. Its kind of funny when a user comes and says "My screen has gone green" :-)
But it is a bit serious since we are going into UAT, and the client will definitely complain of this.
@ John:
It does not seem to be a Client Side Problem, as I have made everyone clear their cache and try again.
And what's intruiging now, is that this issue never occurred on one of the instances we have been using, and suddenly yesterday we started encountering this on that instance as well. As per a Metalink Note referred by Hussein, I have forced the Color Scheme and Look and Feel to Swan and Oracle at Site Level. Yet the problem is encountered.
However, there is one thing that I will try and revert back. With R12, Java Version 1.5.* is shipped.
All the machines here have the 1.6 Version
I will try to downgrade and re-install the 1.5 Version and verify
@ Hussein:
Where can I locate the Application File and verify pls ?
How do I compile all the JSP Files (Using adadmin? )
Thks everyone
Ravi

Similar Messages

'Calculated Result' (profit/loss) is not displayed in BW query (NW04s)

The hierachy for financial statement item (0GLACCEXT) contains the folowing nodes:
-> Stocholder's Equity
> Profit/Loss current year
> Calculated profit (0COA/0BSRESULT-)
> Calculated profit
> Calculated loss
> Calculated loss (0COA/0BSRESULT+)
When I run a balance sheet query against virtual cube 0FIGL_V11, I don't get any data for nodes 'Calculated profit' & 'Calculated loss'.

Dear gurus,
I am searching to solve the same issue you Raynald reported...
Unfortunately, despite the 0BAL_DEPEND information correctly updated, this note 0COA/0BSRESULT+) does not appear.
Everything looks OK on the configuration side...Anyone has an idea what could cause the calculation not to be done ?
PY

Reg oracle ebs - Profit & Loss (Combined) report

hi
Can u please any one send me the actual Code or Query_ for the Profit & Loss (Combined) report for oracle ebs
if not atleast what are the tables to be used and with what conditions
can u pls do a favour for me it was very urgent requirement
Thanks in advance
Babu

Duplicate post
Reg Profit & Loss (Combined) report
Srini

Financial Reporting in BI. Balance Sheet, Profit & Loss

Hello Gurus,
Background
I have a problem in finacial reports esp. Balance Sheet and Profit & Loss reports. When SAP ERP implemented, they have designed the FSV according to the country accounting and business requirements for external reporting. But the regional financial office in the UK requires a different way of reporting esp. the break up of costs in P&L.
As a solution they, non BI and Management have suggsted to design these reports Balance Sheet and P&L in BI and change the design as per the requirement for UK office. i.e For P&L combine FI and CCA queries.
Problem
My problem is, the queries are designed as GL Account Heirarchies and that are static. So for any GL I need to open the Query (FI) and add the GL into the specific group and any new Cost Center I need to open CCA Query and update Cost Center and Cost Elements manually. After adding the GL I need to reconcile both reports...etc It takes half day or full day sometimes to reconcile the reports.
P&L Report is designed as a workbook having three sheets. This workbook has two queris , FI and CCA. Both of them static heirarchy (user defined). So GL Grouping is maintained manually. The third sheet, has the layout and formula to fetch the values from the other two sheets.
Also Balance sheet workbook is having two sheets. The query is having 0GL_Account heirarchy. So when a new GL is added, I need to change the formulas on the other sheet which displays the Balance Sheet in the required format.
My questions
What is the best practice for month end / year end financial reports?
How you have designed the P&L and Balance sheet in BI?
Do you maintain GLs manually?
How can I re-design this reports so that I need not spend a signle minute of them on every month end / year end.
Regards
MultiABAP

To be honnest, I didn't fully understand your case, but I got the general logic.
I would say that you first need to harmonize your data and apply to them the group business rules before doing your reporting. This can be done by different ways. The best one according to me is to define a consolidation chart of accounts (based on the group policy) and mapp these accounts to the operational accounts automatically using BI transformations. Then you'll be able to define your reportings based on this harmonized referential.

Query Mapping in R12

Hi All,
I have below query in my form. This was Oracle 11.0.3 version query. But Now I want to use this qury in Oracle R12.
Can anybody help me to map this query in R12
SELECT order_number_source_id
FROM apps.so_order_types_all
WHERE order_type_id = :Profile.returns_order_type_id;
Thanks in advance

This forum is for general Oracle Forms questions. Please post your question in the General EBS Discussion forum. If you have a general Forms question, by all means, ask it here! ;-)
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Query in timesten taking more time than query in oracle database

Hi,
Can anyone please explain me why query in timesten taking more time
than query in oracle database.
I am mentioning in detail what are my settings and what have I done
step by step.........
1.This is the table I created in Oracle datababase
(Oracle Database 10g Enterprise Edition Release 10.2.0.1.0)...
CREATE TABLE student (
id NUMBER(9) primary keY ,
first_name VARCHAR2(10),
last_name VARCHAR2(10)
2.THIS IS THE ANONYMOUS BLOCK I USE TO
POPULATE THE STUDENT TABLE(TOTAL 2599999 ROWS)...
declare
firstname varchar2(12);
lastname varchar2(12);
catt number(9);
begin
for cntr in 1..2599999 loop
firstname:=(cntr+8)||'f';
lastname:=(cntr+2)||'l';
if cntr like '%9999' then
dbms_output.put_line(cntr);
end if;
insert into student values(cntr,firstname, lastname);
end loop;
end;
3. MY DSN IS SET THE FOLLWING WAY..
DATA STORE PATH- G:\dipesh3repo\db
LOG DIRECTORY- G:\dipesh3repo\log
PERM DATA SIZE-1000
TEMP DATA SIZE-1000
MY TIMESTEN VERSION-
C:\Documents and Settings\dipesh>ttversion
TimesTen Release 7.0.3.0.0 (32 bit NT) (tt70_32:17000) 2007-09-19T16:04:16Z
Instance admin: dipesh
Instance home directory: G:\TimestTen\TT70_32
Daemon home directory: G:\TimestTen\TT70_32\srv\info
THEN I CONNECT TO THE TIMESTEN DATABASE
C:\Documents and Settings\dipesh> ttisql
command>connect "dsn=dipesh3;oraclepwd=tiger";
4. THEN I START THE AGENT
call ttCacheUidPwdSet('SCOTT','TIGER');
Command> CALL ttCacheStart();
5.THEN I CREATE THE READ ONLY CACHE GROUP AND LOAD IT
create readonly cache group rc_student autorefresh
interval 5 seconds from student
(id int not null primary key, first_name varchar2(10), last_name varchar2(10));
load cache group rc_student commit every 100 rows;
6.NOW I CAN ACCESS THE TABLES FROM TIMESTEN AND PERFORM THE QUERY
I SET THE TIMING..
command>TIMING 1;
consider this query now..
Command> select * from student where first_name='2155666f';
< 2155658, 2155666f, 2155660l >
1 row found.
Execution time (SQLExecute + Fetch Loop) = 0.668822 seconds.
another query-
Command> SELECT * FROM STUDENTS WHERE FIRST_NAME='2340009f';
2206: Table SCOTT.STUDENTS not found
Execution time (SQLPrepare) = 0.074964 seconds.
The command failed.
Command> SELECT * FROM STUDENT where first_name='2093434f';
< 2093426, 2093434f, 2093428l >
1 row found.
Execution time (SQLExecute + Fetch Loop) = 0.585897 seconds.
Command>
7.NOW I PERFORM THE SIMILAR QUERIES FROM SQLPLUS...
SQL> SELECT * FROM STUDENT WHERE FIRST_NAME='1498671f';
ID FIRST_NAME LAST_NAME
1498663 1498671f 1498665l
Elapsed: 00:00:00.15
Can anyone please explain me why query in timesten taking more time
that query in oracle database.
Message was edited by: Dipesh Majumdar
user542575
Message was edited by:
user542575

TimesTen
Hardware: Windows Server 2003 R2 Enterprise x64; 8 x Dual-core AMD 8216 2.41GHz processors; 32 GB RAM
Version: 7.0.4.0.0 64 bit
Schema:
create usermanaged cache group factCache from
MV_US_DATAMART
ORDER_DATE               DATE,
IF_SYSTEM               VARCHAR2(32) NOT NULL,
GROUPING_ID                TT_BIGINT,
TIME_DIM_ID               TT_INTEGER NOT NULL,
BUSINESS_DIM_ID          TT_INTEGER NOT NULL,
ACCOUNT_DIM_ID               TT_INTEGER NOT NULL,
ORDERTYPE_DIM_ID          TT_INTEGER NOT NULL,
INSTR_DIM_ID               TT_INTEGER NOT NULL,
EXECUTION_DIM_ID          TT_INTEGER NOT NULL,
EXEC_EXCHANGE_DIM_ID TT_INTEGER NOT NULL,
NO_ORDERS               TT_BIGINT,
FILLED_QUANTITY          TT_BIGINT,
CNT_FILLED_QUANTITY          TT_BIGINT,
QUANTITY               TT_BIGINT,
CNT_QUANTITY               TT_BIGINT,
COMMISSION               BINARY_FLOAT,
CNT_COMMISSION               TT_BIGINT,
FILLS_NUMBER               TT_BIGINT,
CNT_FILLS_NUMBER          TT_BIGINT,
AGGRESSIVE_FILLS          TT_BIGINT,
CNT_AGGRESSIVE_FILLS          TT_BIGINT,
NOTIONAL               BINARY_FLOAT,
CNT_NOTIONAL               TT_BIGINT,
TOTAL_PRICE               BINARY_FLOAT,
CNT_TOTAL_PRICE          TT_BIGINT,
CANCELLED_ORDERS_COUNT          TT_BIGINT,
CNT_CANCELLED_ORDERS_COUNT     TT_BIGINT,
ROUTED_ORDERS_NO          TT_BIGINT,
CNT_ROUTED_ORDERS_NO          TT_BIGINT,
ROUTED_LIQUIDITY_QTY          TT_BIGINT,
CNT_ROUTED_LIQUIDITY_QTY     TT_BIGINT,
REMOVED_LIQUIDITY_QTY          TT_BIGINT,
CNT_REMOVED_LIQUIDITY_QTY     TT_BIGINT,
ADDED_LIQUIDITY_QTY          TT_BIGINT,
CNT_ADDED_LIQUIDITY_QTY     TT_BIGINT,
AGENT_CHARGES               BINARY_FLOAT,
CNT_AGENT_CHARGES          TT_BIGINT,
CLEARING_CHARGES          BINARY_FLOAT,
CNT_CLEARING_CHARGES          TT_BIGINT,
EXECUTION_CHARGES          BINARY_FLOAT,
CNT_EXECUTION_CHARGES          TT_BIGINT,
TRANSACTION_CHARGES          BINARY_FLOAT,
CNT_TRANSACTION_CHARGES     TT_BIGINT,
ORDER_MANAGEMENT          BINARY_FLOAT,
CNT_ORDER_MANAGEMENT          TT_BIGINT,
SETTLEMENT_CHARGES          BINARY_FLOAT,
CNT_SETTLEMENT_CHARGES          TT_BIGINT,
RECOVERED_AGENT          BINARY_FLOAT,
CNT_RECOVERED_AGENT          TT_BIGINT,
RECOVERED_CLEARING          BINARY_FLOAT,
CNT_RECOVERED_CLEARING          TT_BIGINT,
RECOVERED_EXECUTION          BINARY_FLOAT,
CNT_RECOVERED_EXECUTION     TT_BIGINT,
RECOVERED_TRANSACTION          BINARY_FLOAT,
CNT_RECOVERED_TRANSACTION     TT_BIGINT,
RECOVERED_ORD_MGT          BINARY_FLOAT,
CNT_RECOVERED_ORD_MGT          TT_BIGINT,
RECOVERED_SETTLEMENT          BINARY_FLOAT,
CNT_RECOVERED_SETTLEMENT     TT_BIGINT,
CLIENT_AGENT               BINARY_FLOAT,
CNT_CLIENT_AGENT          TT_BIGINT,
CLIENT_ORDER_MGT          BINARY_FLOAT,
CNT_CLIENT_ORDER_MGT          TT_BIGINT,
CLIENT_EXEC               BINARY_FLOAT,
CNT_CLIENT_EXEC          TT_BIGINT,
CLIENT_TRANS               BINARY_FLOAT,
CNT_CLIENT_TRANS          TT_BIGINT,
CLIENT_CLEARING          BINARY_FLOAT,
CNT_CLIENT_CLEARING          TT_BIGINT,
CLIENT_SETTLE               BINARY_FLOAT,
CNT_CLIENT_SETTLE          TT_BIGINT,
CHARGEABLE_TAXES          BINARY_FLOAT,
CNT_CHARGEABLE_TAXES          TT_BIGINT,
VENDOR_CHARGE               BINARY_FLOAT,
CNT_VENDOR_CHARGE          TT_BIGINT,
ROUTING_CHARGES          BINARY_FLOAT,
CNT_ROUTING_CHARGES          TT_BIGINT,
RECOVERED_ROUTING          BINARY_FLOAT,
CNT_RECOVERED_ROUTING          TT_BIGINT,
CLIENT_ROUTING               BINARY_FLOAT,
CNT_CLIENT_ROUTING          TT_BIGINT,
TICKET_CHARGES               BINARY_FLOAT,
CNT_TICKET_CHARGES          TT_BIGINT,
RECOVERED_TICKET_CHARGES     BINARY_FLOAT,
CNT_RECOVERED_TICKET_CHARGES     TT_BIGINT,
PRIMARY KEY(ORDER_DATE, TIME_DIM_ID, BUSINESS_DIM_ID, ACCOUNT_DIM_ID, ORDERTYPE_DIM_ID, INSTR_DIM_ID, EXECUTION_DIM_ID,EXEC_EXCHANGE_DIM_ID),
READONLY);
No of rows: 2228558
Config:
< CkptFrequency, 600 >
< CkptLogVolume, 0 >
< CkptRate, 0 >
< ConnectionCharacterSet, US7ASCII >
< ConnectionName, tt_us_dma >
< Connections, 64 >
< DataBaseCharacterSet, AL32UTF8 >
< DataStore, e:\andrew\datacache\usDMA >
< DurableCommits, 0 >
< GroupRestrict, <NULL> >
< LockLevel, 0 >
< LockWait, 10 >
< LogBuffSize, 65536 >
< LogDir, e:\andrew\datacache\ >
< LogFileSize, 64 >
< LogFlushMethod, 1 >
< LogPurge, 0 >
< Logging, 1 >
< MemoryLock, 0 >
< NLS_LENGTH_SEMANTICS, BYTE >
< NLS_NCHAR_CONV_EXCP, 0 >
< NLS_SORT, BINARY >
< OracleID, NYCATP1 >
< PassThrough, 0 >
< PermSize, 4000 >
< PermWarnThreshold, 90 >
< PrivateCommands, 0 >
< Preallocate, 0 >
< QueryThreshold, 0 >
< RACCallback, 0 >
< SQLQueryTimeout, 0 >
< TempSize, 514 >
< TempWarnThreshold, 90 >
< Temporary, 1 >
< TransparentLoad, 0 >
< TypeMode, 0 >
< UID, OS_OWNER >
ORACLE:
Hardware: Sunos 5.10; 24x1.8Ghz (unsure of type); 82 GB RAM
Version 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
Schema:
CREATE MATERIALIZED VIEW OS_OWNER.MV_US_DATAMART
TABLESPACE TS_OS
PARTITION BY RANGE (ORDER_DATE)
PARTITION MV_US_DATAMART_MINVAL VALUES LESS THAN (TO_DATE(' 2007-11-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_NOV_D1 VALUES LESS THAN (TO_DATE(' 2007-11-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_NOV_D2 VALUES LESS THAN (TO_DATE(' 2007-11-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_NOV_D3 VALUES LESS THAN (TO_DATE(' 2007-12-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_DEC_D1 VALUES LESS THAN (TO_DATE(' 2007-12-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_DEC_D2 VALUES LESS THAN (TO_DATE(' 2007-12-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_DEC_D3 VALUES LESS THAN (TO_DATE(' 2008-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_08_JAN_D1 VALUES LESS THAN (TO_DATE(' 2008-01-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_08_JAN_D2 VALUES LESS THAN (TO_DATE(' 2008-01-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_08_JAN_D3 VALUES LESS THAN (TO_DATE(' 2008-02-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_MAXVAL VALUES LESS THAN (MAXVALUE)
LOGGING
NOCOMPRESS
TABLESPACE TS_OS
NOCACHE
NOCOMPRESS
NOPARALLEL
BUILD DEFERRED
USING INDEX
TABLESPACE TS_OS_INDEX
REFRESH FAST ON DEMAND
WITH PRIMARY KEY
ENABLE QUERY REWRITE
AS
SELECT order_date, if_system,
GROUPING_ID (order_date,
if_system,
business_dim_id,
time_dim_id,
account_dim_id,
ordertype_dim_id,
instr_dim_id,
execution_dim_id,
exec_exchange_dim_id
) GROUPING_ID,
/* ============ DIMENSIONS ============ */
time_dim_id, business_dim_id, account_dim_id, ordertype_dim_id,
instr_dim_id, execution_dim_id, exec_exchange_dim_id,
/* ============ MEASURES ============ */
-- o.FX_RATE /* FX_RATE */,
COUNT (*) no_orders,
-- SUM(NO_ORDERS) NO_ORDERS,
-- COUNT(NO_ORDERS) CNT_NO_ORDERS,
SUM (filled_quantity) filled_quantity,
COUNT (filled_quantity) cnt_filled_quantity, SUM (quantity) quantity,
COUNT (quantity) cnt_quantity, SUM (commission) commission,
COUNT (commission) cnt_commission, SUM (fills_number) fills_number,
COUNT (fills_number) cnt_fills_number,
SUM (aggressive_fills) aggressive_fills,
COUNT (aggressive_fills) cnt_aggressive_fills,
SUM (fx_rate * filled_quantity * average_price) notional,
COUNT (fx_rate * filled_quantity * average_price) cnt_notional,
SUM (fx_rate * fills_number * average_price) total_price,
COUNT (fx_rate * fills_number * average_price) cnt_total_price,
SUM (CASE
WHEN order_status = 'C'
THEN 1
ELSE 0
END) cancelled_orders_count,
COUNT (CASE
WHEN order_status = 'C'
THEN 1
ELSE 0
END
) cnt_cancelled_orders_count,
-- SUM(t.FX_RATE*t.NO_FILLS*t.AVG_PRICE) AVERAGE_PRICE,
-- SUM(FILLS_NUMBER*AVERAGE_PRICE) STAGING_AVERAGE_PRICE,
-- COUNT(FILLS_NUMBER*AVERAGE_PRICE) CNT_STAGING_AVERAGE_PRICE,
SUM (routed_orders_no) routed_orders_no,
COUNT (routed_orders_no) cnt_routed_orders_no,
SUM (routed_liquidity_qty) routed_liquidity_qty,
COUNT (routed_liquidity_qty) cnt_routed_liquidity_qty,
SUM (removed_liquidity_qty) removed_liquidity_qty,
COUNT (removed_liquidity_qty) cnt_removed_liquidity_qty,
SUM (added_liquidity_qty) added_liquidity_qty,
COUNT (added_liquidity_qty) cnt_added_liquidity_qty,
SUM (agent_charges) agent_charges,
COUNT (agent_charges) cnt_agent_charges,
SUM (clearing_charges) clearing_charges,
COUNT (clearing_charges) cnt_clearing_charges,
SUM (execution_charges) execution_charges,
COUNT (execution_charges) cnt_execution_charges,
SUM (transaction_charges) transaction_charges,
COUNT (transaction_charges) cnt_transaction_charges,
SUM (order_management) order_management,
COUNT (order_management) cnt_order_management,
SUM (settlement_charges) settlement_charges,
COUNT (settlement_charges) cnt_settlement_charges,
SUM (recovered_agent) recovered_agent,
COUNT (recovered_agent) cnt_recovered_agent,
SUM (recovered_clearing) recovered_clearing,
COUNT (recovered_clearing) cnt_recovered_clearing,
SUM (recovered_execution) recovered_execution,
COUNT (recovered_execution) cnt_recovered_execution,
SUM (recovered_transaction) recovered_transaction,
COUNT (recovered_transaction) cnt_recovered_transaction,
SUM (recovered_ord_mgt) recovered_ord_mgt,
COUNT (recovered_ord_mgt) cnt_recovered_ord_mgt,
SUM (recovered_settlement) recovered_settlement,
COUNT (recovered_settlement) cnt_recovered_settlement,
SUM (client_agent) client_agent,
COUNT (client_agent) cnt_client_agent,
SUM (client_order_mgt) client_order_mgt,
COUNT (client_order_mgt) cnt_client_order_mgt,
SUM (client_exec) client_exec, COUNT (client_exec) cnt_client_exec,
SUM (client_trans) client_trans,
COUNT (client_trans) cnt_client_trans,
SUM (client_clearing) client_clearing,
COUNT (client_clearing) cnt_client_clearing,
SUM (client_settle) client_settle,
COUNT (client_settle) cnt_client_settle,
SUM (chargeable_taxes) chargeable_taxes,
COUNT (chargeable_taxes) cnt_chargeable_taxes,
SUM (vendor_charge) vendor_charge,
COUNT (vendor_charge) cnt_vendor_charge,
SUM (routing_charges) routing_charges,
COUNT (routing_charges) cnt_routing_charges,
SUM (recovered_routing) recovered_routing,
COUNT (recovered_routing) cnt_recovered_routing,
SUM (client_routing) client_routing,
COUNT (client_routing) cnt_client_routing,
SUM (ticket_charges) ticket_charges,
COUNT (ticket_charges) cnt_ticket_charges,
SUM (recovered_ticket_charges) recovered_ticket_charges,
COUNT (recovered_ticket_charges) cnt_recovered_ticket_charges
FROM us_datamart_raw
GROUP BY order_date,
if_system,
business_dim_id,
time_dim_id,
account_dim_id,
ordertype_dim_id,
instr_dim_id,
execution_dim_id,
exec_exchange_dim_id;
-- Note: Index I_SNAP$_MV_US_DATAMART will be created automatically
-- by Oracle with the associated materialized view.
CREATE UNIQUE INDEX OS_OWNER.MV_US_DATAMART_UDX ON OS_OWNER.MV_US_DATAMART
(ORDER_DATE, TIME_DIM_ID, BUSINESS_DIM_ID, ACCOUNT_DIM_ID, ORDERTYPE_DIM_ID,
INSTR_DIM_ID, EXECUTION_DIM_ID, EXEC_EXCHANGE_DIM_ID)
NOLOGGING
NOPARALLEL
COMPRESS 7;
No of rows: 2228558
The query (taken Mondrian) I run against each of them is:
select sum("MV_US_DATAMART"."NOTIONAL") as "m0"
--, sum("MV_US_DATAMART"."FILLED_QUANTITY") as "m1"
--, sum("MV_US_DATAMART"."AGENT_CHARGES") as "m2"
--, sum("MV_US_DATAMART"."CLEARING_CHARGES") as "m3"
--, sum("MV_US_DATAMART"."EXECUTION_CHARGES") as "m4"
--, sum("MV_US_DATAMART"."TRANSACTION_CHARGES") as "m5"
--, sum("MV_US_DATAMART"."ROUTING_CHARGES") as "m6"
--, sum("MV_US_DATAMART"."ORDER_MANAGEMENT") as "m7"
--, sum("MV_US_DATAMART"."SETTLEMENT_CHARGES") as "m8"
--, sum("MV_US_DATAMART"."COMMISSION") as "m9"
--, sum("MV_US_DATAMART"."RECOVERED_AGENT") as "m10"
--, sum("MV_US_DATAMART"."RECOVERED_CLEARING") as "m11"
--,sum("MV_US_DATAMART"."RECOVERED_EXECUTION") as "m12"
--,sum("MV_US_DATAMART"."RECOVERED_TRANSACTION") as "m13"
--, sum("MV_US_DATAMART"."RECOVERED_ROUTING") as "m14"
--, sum("MV_US_DATAMART"."RECOVERED_ORD_MGT") as "m15"
--, sum("MV_US_DATAMART"."RECOVERED_SETTLEMENT") as "m16"
--, sum("MV_US_DATAMART"."RECOVERED_TICKET_CHARGES") as "m17"
--,sum("MV_US_DATAMART"."TICKET_CHARGES") as "m18"
--, sum("MV_US_DATAMART"."VENDOR_CHARGE") as "m19"
          from "OS_OWNER"."MV_US_DATAMART" "MV_US_DATAMART"
where I uncomment a column at a time and rerun. I improved the TimesTen results since my first post, by retyping the NUMBER columns to BINARY_FLOAT. The results I got were:
No Columns     ORACLE     TimesTen
1     1.05     0.94
2     1.07     1.47
3     2.04     1.8
4     2.06     2.08
5     2.09     2.4
6     3.01     2.67
7     4.02     3.06
8     4.03     3.37
9     4.04     3.62
10     4.06     4.02
11     4.08     4.31
12     4.09     4.61
13     5.01     4.76
14     5.02     5.06
15     5.04     5.25
16     5.05     5.48
17     5.08     5.84
18     6     6.21
19     6.02     6.34
20     6.04     6.75

Need help for learning how to develop interfaces for Oracle R12 EBS

Hi all,
I need to learn how to create interfaces in PL/SQL for Oracle R12 EBS Financials. I cannot find a good starting point for the documentation and examples to help me get started in this area. Would appreciate tips
for this area.

Hi,
What kind of interfaces you are planning to develop?
Oracle already provides list of APIs that can be used (in R12, it is responsibility).
Oracle Integration Repository Documentation Resources Release 12 [ID 396116.1]
Oracle Integration Repository
http://irep.oracle.com/index.html
If those APIs do not satisfy your requirements, you can refer to "Oracle Applications Developer" guide as well as SQL-PL/SQL guides.
Applications Releases 11i and 12
http://www.oracle.com/technetwork/documentation/applications-167706.html
Database Documentation -- SQL-PL/SQL
http://www.oracle.com/technetwork/database/enterprise-edition/documentation/index.html
Thanks,
Hussein

How to Create MultiSheet Excel Report Output in XML Publisher in Oracle R12

Dear All,
How to Create MultiSheet Excel Report Output in XML Publisher in Oracle R12.
My Requirement is to develop RTF Template and geneate Excel output in Multiple sheet.
plz guide me on this..
thnx
Khushal

plz see
BI Publisher: How to create Multisheet in Single Excel file using Excel Template [ID 1352000.1]
for r12 you can use excel template
i think it more appropriate for excel output

How to Configure a oracle R12 with RAC on two different system .

I have one laptop and one desktop
Laptop----
on laptop I have install vmware 8
Host OS --win7
Guest OS---linux 4
Desktop ---
On Desktop I have install Vmware 8
Hosts OS --- Win XP
Guest OS ---Linux 4
Plz suggest How configure oracle R12 with RAC using both system .

Hussein Sawwan wrote:
on laptop I have install vmware 8
Host OS --win7
Guest OS---linux 4
Desktop ---
On Desktop I have install Vmware 8
Hosts OS --- Win XP
Guest OS ---Linux 4
Plz suggest How configure oracle R12 with RAC using both system .If you want to configure RAC, then you must have the same OS installed on all RAC nodes -- See (RAC: Frequently Asked Questions [ID 220970.1], Does Oracle Clusterware or Oracle Real Application Clusters support heterogeneous platforms?) for details.
Once you have the same OS, please refer to:
Oracle E-Business Suite Release 12 High Availability Documentation Roadmap [ID 1072636.1]
Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12 [ID 388577.1]
Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 [ID 823587.1]
Thanks,
HusseinHi Hussein,
For Rac I am using both same OS (linux 4) for both nodes .
Plz suggest its possible to install two nodes on different machine(diiferent virtual machine on different system ) .Can communicate both machine without any problem if its possible plz provide links.

Frm-40505:ORACLE error: unable to perform query in oracle forms 10g

Hi,
I get error frm-40505:ORACLE error: unable to perform query on oracle form in 10g environment, but the same form works properly in 6i.
Please let me know what do i need to do to correct this problem.
Regards,
Priya

Hi everyone,
I have block created on view V_LE_USID_1L (which gives the error frm-40505) . We don't need any updation on this block, so the property 'updateallowed' is set to 'NO'.
To fix this error I modified 'Keymode' property, set it to 'updatable' from 'automatic'. This change solved the problem with frm-40505 but it leads one more problem.
The datablock v_le_usid_1l allows user to enter the text (i.e. updated the field), when the data is saved, no message is shown. When the data is refreshed on the screen, the change done previously on the block will not be seen (this is because the block updateallowed is set to NO), how do we stop the fields of the block being editable?
We don't want to go ahead with this solution as, we might find several similar screens nad its diff to modify each one of them individually. When they work properly in 6i, what it doesn't in 10g? does it require any registry setting?
Regards,
Priya

Problem with different resultset with same data and same query in Oracle 8.1.7 and 9i

Hello,
I have been using this query in oracle 8.1.7
SELECT
ID,
AREA_NO
FROM MANAGER_AREA MGR
WHERE COMPANY_ID = :id AND
(:value < (SELECT COUNT(ROWID)
FROM MANAGER_WORK MW
WHERE MW.AREA_ID = MGR.ID AND
(MW.END_WORK IS NULL OR MW.END_WORK >= SYSDATE)))
order by AREA_NO;
In the above query I want to see rows from MANAGER_AREA table depending upon date criteria in the table MANAGER_WORK and also upon the parameter :value i.e if I pass a value as 0 I get to see records for which their is atleast 1 record in MANAGER_WORK with the date criteria and if I pass -1 then I get all the records because minimum value that count(*) would give is 0. The resultset was as expected in 8.1.7.
A couple of days back I installed PERSONAL 9i to test for testing the basic functionality of our program with the same data. This query fails and irrespective whether I pass -1 or 0 it returns me same dataset which I would have got in case if I pass 0.
I do not know whether this is a bug that has got introduced in 9i. Can anybody help me with this problem. It would be difficult for me to change the parameter send to this query as the Query is called from many different places.
Thanks in advance
Amol.

I cannot use a Group by and a having statement over here. The problem with 'Group by' and 'having' clause is If I have to make a join between the two tables. When I use join then I get only rows that are linked to each other in the table.
If I use outer join to solve that problem then I have to take in consideration the other date condition. My previous query use to virtually discard the corelated query result by using -1 as the value. This will not happen in the join query.
Amol.

How to write REF-CURSOR Query in Oracle Reports

Hello Guys!!
I have a form in which you can select regions/divisions/locations etc by the use of check boxes. And the selected values will be inserted into a table, and based on the selected values of the table the report is run.
The issue I have is with the query inside the Oracle reports(attached to this file).
The query works fine until the last two EXISTS conditions.
IF a region exists In the table report_param then it works fine but if there are no divisions in it , then the query returns no values, which is not correct.
Someone has advised me to use a ref-cursor query inside reports tool, which I am not aware off. So, anykind of suggestions or advises are welcome. Please let me know about it as it is very urgent issue for me. Anykind of help would be greatly
appreciated.
Thanks,
Vishal
-------------------------------------------------------Query in Oracle Reports---------------------------------------------------------
select c.key_segment, p.supplier_id,
decode(:in_col_nm, 'BRAND',nvl(p.product_brand,'<Unknown Brand>'), 'PLN',nvl(p.product_legal_name,'<Unknown Legal Name>')) COL_NM,
sum(a.ext_price) sales_dols,
sum(comp_allow_pkg.get_comp_allow_stddiv(a.control_loc_id, a.product_id, a.sold_to_customer_id,
a.doc_dt, a.ext_price, a.units)) cust_reb_dols,
sum(a.units) units,
sum(a.ext_cost) cost_dols
from sales a, key_segment_plns c, product p, rep_wrtr_dw_cust h
where a.doc_dt between :in_start_dt and :in_end_dt
and a.customer_oc = h.control_loc_id
and a.sold_to_customer_id = h.sold_to_cust_id
and a.ship_to_customer_id = h.ship_to_cust_id
and ((:in_dg_cd = 'B' and h.dealer_grower_cd in ('D','G')) or h.dealer_grower_cd = :in_dg_cd)
and a.product_id = p.product_id
and p.product_gl_class_cd = 'CHEM'
and p.product_legal_name = c.product_legal_name
and c.key_segment in ('GLYPHOSATE','PLANT HEALTH/RUST FUNGICIDES','PYRETHROIDS','STROBI FUNGICIDES')--&IN_KEY_SEGMENTS
-- and (:in_oc = 'ALL' or (a.control_loc_id in (select control_loc from control_loc_comb_ocs where control_loc_comb = :in_oc)))
-- SALES DATA FILTERS TO MATCH ACCUM_SALES_DG_MV
and a.sale_type_cd in ('02','08')
and a.document_type_cd in ('I','C','D')
and (substr(a.product_id,-1) in ('0','1') OR nvl(upper(trim(p.product_brand)),'X') = 'TECH FEE')
and a.units <> 0
and a.unit_cost <> 0
and a.unit_price <> 0
-- NEW FILTERS ADDED 9/11/07: LOCATION(BRANCH), BUSINESS TYPE, RSM/ASM/REP
and ((:in_loc = 'ALL') or (nvl(a.warehouse_id,'<blank>') in (SELECT param_value
FROM report_param
WHERE report_id = :IN_REPORT_ID
AND session_id= :IN_SESSION_ID
AND USER_ID = :IN_USER_ID
AND param_name='LOCATION_TYPE')))
and ((:in_uhs_ag = 'ALL') or (:in_uhs_ag = 'NA' and p.product_uhs_ag != 'A') or (p.product_uhs_ag = :in_uhs_ag))
and ((:in_sales_rep = 'ALL') or (nvl(a.territory_id,'<blank>') in (SELECT param_value
FROM report_param
WHERE report_id = :IN_REPORT_ID
AND session_id= :IN_SESSION_ID
AND USER_ID = :IN_USER_ID
AND param_name='SALES_REP_TYPE')))
and EXISTS
(SELECT '1'
FROM locations l, report_param rp
WHERE rp.report_id = :IN_REPORT_ID
AND rp.session_id= :IN_SESSION_ID
AND rp.user_id = :IN_USER_ID
AND rp.param_value = l.region
AND rp.param_name = 'REGION_TYPE'
AND a.warehouse_id = L.ARS_LOCATION)
and EXISTS
(SELECT '1'
FROM locations l, report_param rp
WHERE rp.report_id = :IN_REPORT_ID
AND rp.session_id= :IN_SESSION_ID
AND rp.user_id = :IN_USER_ID
AND rp.param_value = l.region
AND rp.param_name = 'DIVISION_TYPE'
AND a.warehouse_id = L.ARS_LOCATION)
group by c.key_segment, P.supplier_id,
decode(:in_col_nm, 'BRAND',nvl(p.product_brand,'<Unknown Brand>'), 'PLN',nvl(p.product_legal_name,'<Unknown Legal Name>'))

Hi,
I need your help to create a report using Ref-Cursor. please see the below thread
Report using ref cursor or dynamic Sql

Sub-Select SQL query in Oracle BI Answers

Hi
What's the proper usage of Sub-Select SQL query in Oracle BI Answers Version Oracle Business Intelligence 10.1.3.2.1?
I get [SQL_STATE: HY000] [nQSError: 10058] A general error has occured when trying to Sub Select query like:
itemno = (SELECT MIN(orders.itemno) FROM mydatabase where rownum < 2 order by orders.itemno)

Maybe the best is to create a new physical and logical object for your sub-select and join this with your current objects.

Crosstab Query in Oracle

Dear members:
I have been trying to generate a crosstab query in Oracle using SQL.
This is the situation:
I have two tables in Oracle. One contains characteristics of institutions which people visit, and includes, amongst other fields, the ID of the institution (number) and an identificator for the district where the institution is implanted (number; ranging 1 - 18).
The second table also contains a field with the ID of the institution, and more: the date when the visit occured (date), and a sequential (unique) number for each visit.
What I need to obtain is a final table containing the following fields:
Date of the visit, total number of visitors per date of visit, and a field for each district containing the total number of visitors to instituitions of the district per each date of visit.
Can anyone give me a hint on this?
Also; is there a user-frindly interface minimizing the use of SQL that I can download from Oracle for generating this?
Thank You
André

Crosstab is a reporting function not a SQL one. SQL statements must have a fixed number of columns regardless of the data.
The only way to do it using SQL is to use PL/SQL to generate a dynamic query as shown on Ask Tom here
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:15151874723724
Otherwise there are reporting tools such as Oracle Reports that can do it as well.

Can execut a query in Oracle UCM to get View_Values instead of using GET_SC

Dear All,
i have a question that i had google it and didn't find anything helpful.
i want to ask if i can execut a query in Oracle UCM to get View_Values instead of using GET_SCHEMA_VIEW_VLAUES service ?
ie: asuume that we have a Table name called Employees (having empId, empName) and have a view named as Table name; Employees.
instead of use the GET_SCHEMA_VIEW_VLAUES service to get the data of Employees, can i write a query, ex: select from Employees*_ to get the data.
note: i have a connection parameter to connect to oracle UCM database
any suggestions.
Regards

Yes, you can execute the query and store results into a result set (available also in iDocScript).
There are two sample components that you could use as a starting point - see here http://www.oracle.com/technetwork/middleware/webcenter/content/howtocomponentsbundle-132171.zip or here for 11g http://bexhuff.com/2011/03/howto-component-samples-for-oracle-ucm-11g
Take a look at DataAccess and DatabaseProvider from the sample stack.

Profit & Loss Query in oracle R12

Similar Messages

Maybe you are looking for