Profit Segment not activated during creation of purchase order item

Hello,
While I create a Purchase Order Item, in the account assignment tab, I may fill in at least a cost center or a cost center and an internal order.
If I fill in only a cost center and key the enter buton, the profit segment is activated.
If I fill in the cost center and the Internal Order at the same time and afterwards I key the enter button, the profit segment is not activated. I have to click on the Profit segment button and validate the profit segment manually.
Could you tell me what the problem is?
Thank you in advance
Regards

Hi
That makes sense to me
In any entry you can enter One REAL Object and more than one Stat Object...
SInce you entered Cost Center in Option 1 - You were proposed with PSG and IO as the option
Since you entered Cost center *** REAL IO in Option 2 - The system got what it wanted i.e. One REAL OBJECT.. hence, no more objects are proposed to you... However, you can manually enter PSG or WBS if allowed in your Field Status Group in FI
br, Ajay M

Similar Messages

How to retrieve the vendor number during creation of Purchase Order?

Dear SAP experts,
For our Purchase Orders, during PO creation (t-code ME21 or ME21N) we want to achieve the following:-
1) default the delivery address to our plant A address if the vendor is local and
2) default the delivery address to our plant B address if the vendor is foreign.
At the moment, we are trying to use the user exit enhancement "MMDA0001" to achieve the above.
The problem is how to retrieve the vendor number from the screen so we could pass the vendor number to ZXM06U32 to check the ktokk field in LFA1 table in the whether the vendor is foreign or local.
Thank you in advance.
Regards,
Alex

u can do one thing, create 2 partner function, like 1 for local, and second for import vendor.
or make 2 batch n activate vendor batch and make mandatory field from SPRO.
then goto SHD0, and do one by one step. first time take 1st requirement and second time take second . like that make two variant .
i dont know how much it will be helpful. bt i want to suggest smth like that only.
or, go for ABAPER help
thanks
nisha

WBS and Profit Segment fileds should be filled at Sales Order item level

Hi,
When i create a Sales order I want to save both PA Segment and WBS Element fields in Account Assignment tab at item level.
By default Profit.Segment is filled beacuse COPA is already activated in this system, when i try to enter WBS element in Account Assignment Tab at line item level Profit.Segment field grayed out.
Is it possible to input both the fields WBS element (VBAP-PS_PSP_PNR) and COPA Profitability Segment Number (VBAP-PAOBJNR)
Thanks,
Fract

This is SAP system standar behaviour.
note # 729381 under item 6:

Error during creation of Purchase Order for Sub-Contract

Hi
i am creating PO for Sub-contract, to check whether it copied the components or not, when i clicked components in material data tab: it says u201CMRP parameters for plant XXXX have not been maintained.
Please guys help me out in this matter. Thanks in advance.
Regards,
Krishna

Please post in the relevant forum.

Account assignment to Profit. segment not supported with this G/L account

Hello Guru,
we have activated the COPA- Costing based. after activation while doing the Shipping Cost calculation thr T.C VI01
system is throughing error message
Account assignment to Profit. segment not supported with this G/L account
Message no. ME032
Thanks And Advance
Laxmi narayan

Hi
Probably the GL Account is not created as Cost element with CE category 1 (costs)
Jayaram

Automaticf creation of purchase order through pr

Dear Consultants,
system is not creating automatic purchase order. in me59n i am getting the following error
Requisition could not be converted
i have done the following setting for automatic creation of purchase order
1. in materil master record i have checked auto po.
2. in vendor master record i have checked automatic purchase order
3. i have created purchase info record with the combination of material vendor purchase organization.
4. in source list i have fixed the vendor in me01
5. in source determination under define regular vendor i have checked the box against the required plant.
kindly let me know what all other configurations are required for creating automatic purchase order through purchase requisition
Regards/ Siri

Hi
Is this purchase requisition created during MRP run??
If yes then have you marked the sourcelist record for this vendor as MRP relevant??
If the purchase requisition is generated manually then whether the source of supply was assigned in the PR??
In ME59N, the PR would be converted to PO if the PR has the assigned source of supply.
Regards
Prasad

Automatic creation of purchase orders at goods receipts

Dear guru ,
I want to create purchase order when i execute GR Returns (mvt 161).
Where I define the purchase order document type that I want to automatic create ?
Thanks.

Dear,
Before configuration of setting for creation of Purchase Order automatically, consultant needs to under stand the business requirement and he should be aware of the difference between the different components of Material Management. Such as difference between creation of purchase order automatically in Purchasing and creation of purchase order automatically in Inventory Management. In SAP we can take this activity in both the sub components (Purchasing as well as in Inventory Management).
By this time, I hope that you have understood that there are different settings for each of these components and we have to configure two different set of information to meet each requirement separately. Hence let me define this activity as follows:
Create Purchase Order Automatically in Purchasing
For creation of purchase Order automatically from Purchase Requisitions we need to do the following additional settings in addition to our standard ones.
Activate u2018auto PO' indicator for material master
Activate u2018auto PO' indicator for vendor master
Create Purchase Requisitions using T Code ME51 or ME51N
Use T. Code ME59 or ME59N for auto conversion of PR into purchase order
Create Purchase Order Automatically in Inventory Management
For creation of purchase Order automatically in Inventory Management we need to do the following settings which are independent of the setting what we do in Purchasing for creation of automatic PO from PR.
Define one of the purchase organizations as Standard Purchase Organization
Assign your plant to Standard Purchase Organization
Maintain purchasing information record with price
Maintain the indicator for movement types 101 & 161
Define Default Values (MB01) for Document Type
Now you can enter a goods receipt without entering the purchase order number, a purchase order will be created automatically when you post the goods receipt. All such goods receipt will be valuated at the price maintained in the purchasing information record.
First you can try this with T. Code MB01 if it is working then try with T. Code MIGO, if you face any error or functionality is not working check with your basis consultant some authorization or some patches may be missing. Ask him to apply all relevant patches.
Try using automatic PO for 161 movement for transaction MB01. For MIGO Goods return, its not allowed to create automatic PO due to system settings. This info as I know.
Regards,
Syed Hussain.

Excise rate and value is not getting defaulted from the purchase order

Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
Vishal

Hi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs

Error during creation of transfer orders for material

Hi,
We are doing a transfer of stock from one storage with WM to a storage without WM.
But system does not finish the process automatically displaing the following error message:
"Error during creation of transfer orders for material document 49000XXXX"
System cannot find source storage bin
Thanks in advance for the help
Regard
Enzo

your picking strategy does not find the bin where the material is.
So you need to check what value you have entered for picking in WM view of material master.
then you have to check where your material is (storage type and bin)
then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry.

Header Material Repeated during creation of production order

Sir,
I have defined bom as one component and 3 co product.
During creation of production order in operation overview i found header material is repeated in components.
Pl. suggest me where i have made mistake.
Regards,
Vivek

Hi
Check whether BOM is recursive or not? also check the movement type against the header material.
Also check in CO03>Goto> Material list
Regards
Anupam Sharma
Edited by: anupam sharma on Jan 30, 2012 12:17 PM

Problem During Creation of Production Order

Dear Sirs
Hope you all are well. I am facing a problem in PPDM during creation of Production Order which is that when I try to release the order System shows me material availability error for BOM items but when I check those material in MMBE(stock overview )all materials are available in UN-restricted use stock. I am facing this problem and not able to resolve it please help me out in it.
Thanks
Regards ,
Haseeb Khan
Senior Consultant

Dear
Did you maintain Work Schedulimng View of the Material ??
Did you maintain any Production Storage Loaction in MRP2 view and same is appearing in Goods Movement Tab in CO11N screen with Movement Type 101 ??
Did you maintain the Operation Control Key -pp03 which should have Auto GR check box marked in OP00 ?? Goto Operation Control key -Detail information -Check whther Auto GR is marked or not ??
If you are using Serrial Number Profile and Serial Number , then Auto GR is not possible .Make sure that you are not haveing functionality because it does not support Auto GR fro serialised material and need to do it through MIGO/MB31/MB1C.
Make sure that you have used PP03-Control key only at last operation not all the operations.You need to maintain PP03 at Routing level and call the function by Read PP Master data at production order level (co02-function read pp master data )
Regards
JH
Edited by: Jiaul Haque on Feb 14, 2011 12:55 PM

Creation of Purchase order - set net price in display mode

Hello,
During the creation of purchase order from contract or DA (ME21N-ME59N), I want to set the net price in display mode (under any conditions) .
Is there a parameter setting or a point of modification to make ithis?
Thanks for your contribution.
JLC

Check for existing screen layout name from below settings -
Goto SPRO -> IMG Settings -> Materials Management -> Purchasing -> Purchase Order -> Define Document Types
Check for Field selection key against the PO Type.
Then goto below setting -
SPRO -> IMG Settings -> Materials Management -> Purchasing -> Purchase Order -> Define screen layout at document level
Select the screen layout / Field selection key in this setting and modify the field selection group Quantity and price. Make Price and price unit as display only as per your requirement.

Problem by creation of purchase order

Hi guys,
after implementing SP 9 and 10 we are not longer able to create purchase orders automatically with WF WS14000075. In transaction bbp_pd we get the error message
"System of purchasing organization XXX differs from target system XXX". But we have assigned our product categories for the relevant backend system to the purchasing groups. We also wanted to implement the notes 913831 and 832097 with transaction snote but we could not because these notes were already implemented. In transaction bbp_pd the status for Workflow WS14000075 is "Waiting".
Thanks in forward for your help. We appreciate your help a lot.
BR,
Bernd

Hi Yann,
i have checked the WF14000075 with transaction SWUD. After I have created an event with the user who has created the SC I have checked the Display of event traces. There the following error message appears:
"Check FM with exception",
Event Instance ID    16067
Object Type          BUS2201
Object Key           7100000124
Event                SAVED
Event Creator        US PROD1          PEK
Creation Time        23.11.2006 14:12:19 CET
Receiver Type        WS14000075
Object Key
Receiver FM          SWW_WI_CREATE_VIA_EVENT_IBF
RFC Destination      WORKFLOW_LOCAL_010
Check FM             SWB_CHECK_FB_START_COND_EVAL
Receiver Type FM
Message              Operator 'LT': The value of the left operand cannot be determined
Trace Date/Time      23.11.2006 14:12:20 CET
User Name            PROD1          PEK
Main Program         SAPLSWUS
Action               Check FM ends with exception
BR,
Bernd

Creation of purchase order automatically by taking purchase requesition

Hello Gurus
Is it possible to create purchase order automatically by taking purchase requesition no from sales order?
i checked in all the forms couldn't find any answer .
thank you in advance
regards
venkat

Hi Venkat,
When you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. But If you want the Purchase orders to be created automatically, then you should automate the creation of purchase order by creating a job or using workflow. Other wise to create a PO from PR use ME57. A third-party order is usually created referencing a third-party item in a purchase requisition. You can create purchase orders in this way individually or collectively. For Configuring Automatic PO kINDLY PLEASE LOOK into this.
"http://help.sap.com/saphelp_47x200/helpdata/en/94/da2e3b2bdab96be10000000a114084/frameset.htm"
Kindly please let me know If you need any more information on this.
Regards,
Ram Pedarla

Change Production version during creation of Process Order COR1

Hi,
Scenario:
Based on the entered Material, Plant and Order type system need to trigger a popup asking the user to select the Production Version. This should happen before clicking on SAVE button, so that all the values will be populated correctly based on the changed VERID.
I did not find a user exit that enables to change the Production Version (VERID) value. So I thought of displaying the popup in the user exit EXIT_SAPLCOZF_003 which will be triggered before initial screen appears, export the selected value and pass it to a User Exit or BADI where VERID can be changed. But cannot find a user exit to do it.
Please help me find a User Exit or BADI to change the Production Version during creation of Process Order using COR1 transaction before clicking on SAVE button.
Thanks,
Manoj.

Hi Manoj,
So - almost four years later - I saw your post and I saw myself in the very same situation as you did...
I found a solution for those who wants to change the production version of the production order from the sales order creation: create an enhancement in the function module 'MD_VERSION_SELECTION' and you are good to go.

Profit Segment not activated during creation of purchase order item

Similar Messages

Maybe you are looking for