Profitability Analysis not generated in Contract billing Document

I have created the Billing document against the contract order but the Profitability Analysis is not getting generated.  But any sale order related billing document is created; system automatically creates the Profitability Analysis.
Can you tell me where the problem is or have I missed any steps?
Regards,
Devendra

1) For a service material (DIEN), We are creating an Sales Order (VA01) and doing a order based billing (VF01). In the Sales Order we are giving the plant (no shipping point and storage location as it is a DIEN material).
Once we do the billing we are able to see the Profitability Analysis document.
2) Now we are using the same material we are creating a Contract (VA41) for a period of one year and doing a monthly billing. In this case we are using VF04 for doing the bills that are due.
We are getting two results in this:
a) If we give a Plant in the contract, the Profitability Analysis document is not getting generated at the time of billing.
b) If we do not give any plant, the Profitability Analysis document is getting generated at the time of billing.
Please note that we are using the same material, same pricing procedure in both the above cases 1) and 2). Only difference is that the source documents are different i.e., one is Sales Order and the other one is Contract.
In our copa valuation we have assigned the conditions to value field, no derivation rule assigned.
Regards
Devendra
Edited by: Devendrap on Apr 14, 2009 10:38 AM

Similar Messages

  • Clearing document not generated on cancelling billing document

    When we cancel a billing document through VF11 the cancelled billing document generates a reverse document. The billing document and the cancelled billing document are not getting cleared i.e they show as an open item in the customer account.

    Hi ABAPER,
        1) Open Sales order means - Sales orders that   contain items still to be <u><b>delivered</b></u>.
        2) So unless the delivery of the goods is done. They will be not shown as close order.
        3) you can VBFA to confrim these.
      Any more quries. plez get back
      keeping SDNing,
       SDN

  • COPA document not generated though after billing and accounting generations

    I have an issue with one instant.
    For some reason COPA document is not generated even though billing and accounting document were created. Found no errors in simulation using KE4ST. The billing item details has all the PA segment characteristics.
    COPA documents were created for entries made befor and after this particular one.
    Also we have COPA documents for the product with the same customer and different customers.
    Our system is 'SAP ERP Central Component 5.0'

    Thanks Ajay for the quick response.
    Cost element category is correctly maintained.
    Condition types are mapped.
    COPA is in use for more than 4 years.
    Able to simulate COPA document for the Billing document without errors.
    We do have COPA documents created before and after this particular transaction.
    As you said raising OSS message with SAP.
    Thanks

  • An accounting document is not required for this billing document

    Hi,
    While releasing the billing document to accounting the error is coming like "An accounting document is not required for this billing document"
    Diagnosis:
    The billing document has the net value '0' and does not create an accounting document. Despite this, the posting status 'C' (Posting document has been created) is set internally for this billing document.
    But the net value is coming in the sales order and alsi into the Billing document.
    gurus plz help me.
    regards,
    ragesh.

    Goto VOFA screen and check for ur billing type , what is assigned in the document type field?.
    Also please check, the posting block is activated. if it is, please remove.
    Also goto the accounting document type settings at OBA7, check whether the customer field is ticked under the account type allowed tab.
    Please let me know, whether ur problem solved..
    Reward points if useful..

  • To Generate the invoices (billing document) in t-code VF02 to DIRs in DMS

    Hi All,
    I have requirement is to generate the invoices (billing document) in t-code VF02 to DIRs in DMS or print list using ArchiveLink every night in batch program.
    Did anybody worked on similar scenerios, please let me know.
    Regards
    MM

    Hi Manish (and everyone).
    Were you able to find the solution to this?
    I am in a similar situation - trying to generate invoices from an ArchiveLink document.
    All setup pertaining to ArchiveLink is already in place.  What I need to do now is access the document from the content repository and start from there.
    Any input will be greatly appreciated.
    And of course, points will be rewarded.
    Many thanks!

  • Operation number field not appearing in the billing document

    Team-
    Recently we have done EHP5 upgrade and after that operation number field is available in the sales document but operation number field is not available in the billing document. Any idea why ?
    Thanks

    Hi
    Check what patches have been put in EHP5.As it is related to field.,its better to check the configuration settings  and if everything is fine then,its better to take your technical team help by checking where the operation number field is getting updated in the sales order and check whether the operation number field is coming  blank in billing document or not.
    Regards
    Srinath

  • Accounting Document Not Generated  for SD Billing

    Hello SAP Champs,
    Please let me know if you have any thoughts or solution for the below issue.
    Background:
    We have company code 3000 that was created three years back. In the month of November, 2007, we have activated Controlling in this company code. Now business is trying to cancel an Invoice that was posted prior to Controlling activation (for company code 3000).
    The transaction used is VF11.  The result is a cancellation document has been created in the  system but no accounting document was generated.  The error message is "Account XXXXX requires assignemnt to CO object".
    However there is no issue with the account determination or account assignment setup. In fact all other Invoices(that were generated after controlling is made active), account assignment works just fine.
    We are trying to see if there is any standard procedure or mechanism to resolve this issue.
    Question -  Can we manually create the accounting document for the cancelled invoice? I tried creating one(using FB01) but it was not recognized by the invoice and I'm not seeing it in the document flow. We have the same document number for Invoice and Accounting document.   Please let me know if I'm missing anythiing here or is there a better way to resolve this.
    Thank you in advance for your help. Points rewarded for sure.

    You can map Sales Order number to either 'Assignment' or 'Reference' fields in accounting document using Copy control function in SD. Please use transaction VTFA, this needs to be maintained for combinations of billing type and sales document type. Please ensure these fields are not currently used in your system for other information.
    Following fields can be mapped to 'Assignment' or 'Reference'.
    A Purchase order number
    B Sales order number
    C Delivery number
    D External delivery number
    E Current billing document number
    F External delivery no. if available, otherwise delivery no.
    If you currently use 'Assignment' or 'Reference' fields for other details, you can use user exit EXIT_SAPLV60B_008.
    Thanks
    Venkata Ganesh Perumalla
    Edited by: Venkata Ganesh Perumalla on Oct 4, 2010 11:52 AM

  • GL Account is not getting picked by billing document

    Hi Gurus,
    one new GL account is set up by our FI team for a accrual condition type.
    case 1:
    Now when i have cancelled the previous created billing doc and trying to create again then the new GL account is not getting picked.
    case 2:
    Whereas when am doing the complete process flow like sales order creation, delivery and billing then the new GL account is getting picked.
    Could you please let me know what would be the reason for this, why its not getting picked in first case.
    Thanks,
    Ashi

    Hello Preety,
    Unless you see the Revenue Account Determination Analysis for the Billing document, it is very difficult to understand the reason. Please click on the Environment >> Acc.Determination Analysis >> Revenue account in the VF03 screen and find the missing assignment.
    Thanks,
    Suman$

  • No accounting document generated for SD billing document

    Hello,
    We had a billing document with status "C Posting document has been created" but actually there was no accounting document generated.
    When we try to release the billing document again using VF02, the system displays the message "The document has already been passed on to accounting".
    What is the problem?
    Thanks in advance!

    longlost,
    Accouting documents not generated,
    1. VF02 Mode Click"Release o Acounting" the Accoutning documents not generated.
    2. If yes, then OK Else
    3. Check Whether you have assigned Accounting keys to the relevent condition types.
    4. Check Account assignment Procedure VKOA and check G/L account has been assigned.
    5. If error found correct it
    If you say "The document has already been passed on to accounting" then it is automatic
    Check with FI Consultant whether Accounting entries has been posted with reference to customer and Invoice.
    Fi consultant will run F-28 - Post incoming payments or F-26 Payment past entry after that it will come to cleared status.
    Regards
    Sathya

  • Billing doc is not appearing :CRM_SRVBIL - Release Billing Documents

    Hello Experts,
    We are running the SAP CRM service process and we are also doing the billing in CRM itself.
    For one service confirmation we are facing the billing problem.
    The isue: We have completed the Confiremation and while we are doing the billing , the line items are not displaying in "CRM_SRVBIL - Release Billing Documents ".
    There is no error in confirmation and that is closed successfully.
    Please help to fix this Billing issue.

    Hi,
    since you said the revenue acc is well set there is no error, there are 2 reasons for billing document not posted
    Reason 1: Tax code is not found in the relevant condition record, pl check the cond record and FTXP for maintaining the same
    Reason 2: incomplete foreign data,so either maintain the foreign data or at the copy control level uncheck the Redetermine the exports tab.
    Hope find it useful
    Regards
    baalakrushnan.da

  • No accounting document generated after creating billing document.

    I created my billing document in SD and saved but I am getting the message "No accounting document generated"
    What am I missing and what do I need to do?
    Is there a T code or menu path to see all billing document blocked from posting?
    Thanks for your prompt response.

    Hi,
    Check in Tcode  VOFA if account determination procedure is assigned there.
    If it is there,then go to VF02 and try to release manually to accounting.
    Check Tcode VFX3 for blocked billing documents
    Reward points if useful
    Regards,
    Amrish Purohit

  • Hi , I am not able to create billing document from the delivery document .

    Hi,
    I am facing one problem i am trying to create billing document from delivery document but it is giving error " Payer" and Sold to party not found ".
    in my Delivery Document field partner tab is showing only ship to party it should show payer and sold to party also .
    Although it is maintained in customer AG.
    can any one help in this ????
    thanks !!!!!!!!!!

    Hi Payal,
    1.u check whether u have maintained[entering actual number] payer and bill to party in sales order[ which is copied from customer master].
    2.and check partner determination procedure for delivery document.
    more important is u wouldnot have maintained partner determination procedure for delivery header.[spro->sales and distribution->basic function->partner determination->partner determination for delivery]
    Regards
    Sharad

  • Pricing should not be changed in billing document?

    HI,
    We have given manual entry provision for pricing in Sales order level . But as per the company requirement, the price should not be changed in the billing document. Also the point to be considered is, it is a delivery based billing. What is the configuration required to ensure that , System should not allow pricing to be changed in billing document when it is getting created.
      I have checked the forum and found no threads linked to it. Kindly help me in this regard.
    Thanks in advance
    Rgds,
    Sivarajesh. J

    Hi ,
    In SPRO -> S&D-> Billing Documents ->Maintain copying Control for Billing documents. Here select for copying control for ( based on your case) delivery type to Invoice type  (Eg: Invoice type F2: Delivery type : LF) and then go to Item and select Item Category.
    And then go to Item Category details (Eg: TAN) .  Here you find Pricing type and based on your requirement you can select. If not satisfying your need then you can modify the copying requirement.
    Thanks,
    Veerendra

  • Shipment cost condition not copied in the billing document

    hi
    I have created shipment for the delivery and compelted the shipment cost as well , however when i create the billing document the shipment cost conditions are not copied in to the billing document.
    i have already set up pricing source as F in copy control from Delivery to billing document ,
    what are the other settings to be done to copy the shipment cost condition types to billing document  ?
    Regards
    Dinesh

    You migth include it on copy control frome delivery to invoice.
    Regards,
    RP

  • Accouting FI document is not generating at sale billing (VF01)

    Hi gurus,
    I am able to generate sales billing at sd (VF01), but Accouting document is not getting generated. Can any one help to correct this issue.
    Regards,
    RAM

    Hi Ram,
    Hope this link will help you.
    http://wiki.sdn.sap.com/wiki/display/ERPLO/SD+FAQ#SDFAQ-2.AccountDetermination
    Thanks and regards
    Praveen.J

Maybe you are looking for

  • After USB recovery, restoration incomplete error - error during PININST_BBV.

    I performed a USB recovery with USB made by Creating Recovery to wipe the hard drive.following error message when I click the Details button: ctoerror.flg file [  1:06:44.60] ChkErrBB.CMD :  Detect some error during PININST_BBV. [  1:06:44.60] ChkErr

  • Question about renaming file names

    After spending many hours organizing my iphoto library, deleting duplicates, etc, it is now where I want it. So I have two questions. 1. Is there a downside to updating all the file names to the Event Name as long as this is done in iphoto? (I was th

  • How can i get records of all text messages

    How do you get records of all your texts? Everyone tells me to go to text usage for my number but it does not show up. Any ideas? I need them like now

  • Valuation price of Purchase requisition

    Dear Friends, When i create the purchase order with reference to Purchase requisition i.e i dragged the purchase requisition from document over view to box,then all the data is copying except valuation price mentioned in the purchase requisiton. Valu

  • Adobe flash not working with Firefox 5 - cannot open previous files

    Since I have updated to Firefox 5, my flash player does not open certain cites. I get the message that it needs an upgrade plug in. I did it and it still is a problem. This did not happen before I upgraded to 5. HELP!