Profitability segment in Entry Data Profile CATS

Hello.
I would like to know how to enter the field "profitability segment" as a default value in the Data Entry Profile CATS.
I have intended via customizing but I am not able to find the field profitability segment.
Thank you very much for your help.
Regards.

Hello Kapil.
Thank you for your prompt answer.
There is a modifiable field called "Details on profit. segment" in CAC2 Screen Group (Data Entry Section).
I have activated radiobutton Input for the field "Details on profit. segment" CATSFIELDS-ERGOBJEKT.
Nevertheless, the field is not displayed as default in the Data entry Profile.
I was wondering whether in CAC2 the field is activated as "account assignment" but not as default field in the Data entry Profile. Could you please confirm?
Thank you very much.
Best Regards,
Antonio

Similar Messages

Profitability Segment filed while entering a document

Hello,
I am not able to see the filed profitability segment filed in FB01,
I am using Posting Key 19 (Checked the filed status - Profitability segment - Optional Entry)
Filed Status of Alternative GL account (Filed Status - Profitability segment - Optional Entry)
When i am posting an entry, i am not able to see the filed profitability segment,
Thanks and Regards
A.Rama Krishna

Hi
Profitablity segment applicable to profit and loss accounts please check the field status goup for Balance sheet acount
Thanks & Regards
Phaneendra

How to update sales order number (KAUFN) characteristic in the profitability segment of the PA document created at the time of service entry sheet confirmation, as a result of shipment cost document

Hi,
We have a scenario wherein we create shipment cost documents against delivery. As a result of shipments fully transferred, a PO for freight vendor is automatically created and a service entry sheet confirmation happens. As a result of service entry sheet confirmation, we have Financial accounting, Controlling and profitability analysis documents created. We have a requirement wherein we need to have the characteristic “sales order number (KAUFN)” populated in the profitability analysis document created as a result of service entry sheet confirmation.
Could someone please advice how could this be attained in COPA. Thanks for your help in advance.
Regards,
Sandeep

Hi Ajay,
Thank you for the quick update.
The document is updated to COPA through OKB9 settings. The profitability segment is updated with fields like customer, product, company code, plant, sales area data, profit center, etc; however the sales order number is missing.
Could you please elaborate further how could FI substitution be implemented to call for the FM COPA_PROFITABILITY_SEGMENT through user exit? Are you recommending the substitution through GGB1? What could be the possible validation to call for the user exit to be implemented?
Regards,
Sandeep Kulkarni

Missing data: Profitability segment no. in Sale order creation

Hi Gurus,
while creating a Sales order, I am getting the Below Error;
"Error while the Operating Concern being determined"
Massage no: KE/AD817
Error: Missing data: Profitability segment no.
Its Urgent..
Can anybody suggest....
Thanks
BKT

Hi Bani,
Please check if note 380102 helps in this case. From the long text of the error message you can find out which charachteristic is responsible for the error message.
Regards,
Abhisek

Entry aids in (Assignment to Profitability Segment) Missing -TCode FEBA

Hi All,
When i am using the transaction Code FEBA to clear the customer account the entry aids (Assignment to Profitability Segment)
is missing. as the system takes FB05 in background of FEBA. But when i use Transaction code FB05 to clear the customer account the Entry aids is appearing on the screen.
Can some one let me k ow how the Entry aids Can be seen in the TCode Feba?

Hi,
I think in this case the transaction is processed by system in background as a batch-job.
I assume you are on release 5.0 or higher. Note 581739 should be part of the system. In this case for batch processing no more entry aids will be displayed, because in the new standard always all chararcteristics will be displayed and offered to be filled.
regards
Waman

Profitability Segment Data On FI Document

Hi All,
I have posted few FI Documents using FB01, while I was posting the entries to the GL Accounts I have entered the Profitability Segment details also. Now if I want to see the details of the Profitability Segments, which table I can use? Those details are not available in BSEG. Please let me know how to get that information. It is urgent requirement.
Thanks
Uday

You should look in to table CE1XXX where XXXX refers to your operating concern. The direct postings from FI are updated with record type B. Alternatively you can use transaction KE24.

Profitability segment optional in recurring entries?

Hi all!
I've got a requirement from my customer, the want to use recurring entries (tr code fbd1) where they want the possibility to post to a profitalibilty segment to update COPA. I have checked tr code 07e3 but I cannot find this field possible in any account assignment model. Can anyone please help?
Thanks in advance!

Hi,
If you want to use account assignment model to bring in, the profitability segment while creating the recurring posting template (FBD1), that's is not possible., because of whta you previously indicated, profitability segment is not in the field selection list. What you may to do instead, is to make sure the account(s) you want to post to COPA do have a field status group with profitability segment on (Either as an optional or mandatory field), so while creating the line item in the recurring posting template the icon "profitability segement" (Right pointing arrow) would be ready for you to access and the needed fields.
Hope this helps.
GG

Mandatory field set up for Profitable segment entry

Dear All,
Is there any way to set up Customer as mandatory field in profitable segment while manually posting to GL for which Profitable segment is required.
Thanks,
Ram

Hi Ram,
You could try to use Enhancement COPA000 for this requirement.

In KEPM error msg ' not all profitability segment can be processed'

Hi
PL HELP ME WITH THE FOLLOWING ERROR, when doing 'enter planning' in KEPM.
Message no. KG803
Diagnosis
You cannot maintain all of the profitability segments in the current transaction. This could be due to the following:
1. Errors occurred when characteristic values were derived for the profitability segments.
If this is the case, you can display the error messages under the menu option "Extras -> Error logs -> Derivation".
In the log , it says
Diagnosis
The characteristic "PRCTR" ("Profit Center") should be posted to Profitability Analysis (CO-PA). When the system checked the entries, it was established that the transferred characteristic value (" 1000 YB999") is not valid in CO-PA.
Thanks
kamala

Hi Kamala,
I would kindly ask you to check transaction OKEQN with your relevant planning version you are using in KEPM and where the above error occurs.
The system checks within derivation (where the error comes from) if the characteristic value is valid for a specific date set within the version (thus trans. OKEQN). If you have PRCTR '1000 102C511' not valid for the date set in the version within OKEQN, then this error message is justified, as the system realises that the PRCTR was not valid by that time.
Could you please check this? If the profit center is not valid for this date please adjust the date to a more recent one.
Best Regards,
Abhisek Patnaik

Required a customer field(located in the profitability segment box) as mand

our client is requested that the customer field (located in the Profitability Segment box) be a mandatory field for GL accounts which are getting posted directly from FI. This field is needed so that proper reporting can be generated for bad debt and product liability claims. Currently this field is not a mandatory when making journal entries, so there were some postings happened with out customer field. Due to this we are unable to extract exact values in CO-PA reports . Please can some one help me on this and explain the process and settings for this??
Thanks in advance.
Regards,
Venkat

Hi Eli,
I have posted note to SAP and i got the below reply from them.
Get this functionality you should change
the coding of form DERIVE_CRITERIA_EXTENDED from include RKEVRK2L after
uninstallation of note 115500(in case you have installed) like this:
Im Dialogfall (Kontierungspopup) Verprobung ob für Feld
Mußeingabe erforderlich (Merkmalsgruppe!)
(nicht f. Faktura, da dort keine Fehlermeldung moeglich)
if ( xt_criteria-field is initial
BEGIN OF DELETION *****
and xt_criteria-status eq '2'
and not is_status_flags-dialog is initial ) .
perform send_message using 'KE' 'E' '494'
END OF DELETION *****
BEGIN OF INSERTION *****
and xt_criteria-status eq '2' ) .
data: l_mtyp type c.
if not IS_STATUS_FLAGS-DIALOG is initial.
l_mtyp = 'E'.
else.
l_mtyp = 'W'.
endif.
perform send_message using 'KE' l_mtyp '494'
END OF INSERTION *****
xt_criteria-fieldname
is_cobl-vorgn
i_char_group
endif.
Afterwards you have to run function module RKE_GENERATE_INTERFACE_ACT
for your operating concern to update the generated program RK2LXXXX.
Thanks & Regards,
Venkat

BAPI_INTERNALORDER_CREATE settlement rule for profitability segment

I am trying to create internal orders using BAPI_INTERNALORDER_CREATE, in the Settlement rules data I want to settle to profitability segment but I can't find away to do this. I can settle to other orders, cost centers and WBS elements but not PSG.
Are you guys aware of any way I cant do this. How can I derive profitability segment from PNL? is there other functions that will help do this?
Thank you very much
Omar

Yes that field is enabled for settling from settlement profile configuration. The other enabled fields like order, cost centers and profit centers are available.
I think the BAPI is missing this functionality since the profitability segment has to be derived from other characteristics like PNL.
Are you guys aware of any functions that do the derivation of the profitability segment given PNL for example?
In this case where the BAPI is missing some key function what is the best way forward?
Thanks very much
Omar

Profitability Segment while releasing invoice to Accounting

Hi,
I am configuring a scenario in which a debit memo request and a corresponding debit memo will be created. Users want to put in a WBS element at the line item level of the debit memo request (which is fine). Business gave me a GL account in which the profitability segment is a required entry. Now, when I try to release the invoice to accounting, I get an error saying "Field Prof.Segmt is a required field for G/L account" (Msg Number F5808). I know that by changing the field status group on the GL account, i can make it post, but that is not the point. I want to know
a. Why system is unable to determine the profitability segment (i entered GL account in OKB9 and checked auto determination of profitability segment)
b. Is it because I am using the WBS element and trying to post to both FI and CO (because, when i use WBS in sales order, during account determination, system looks for KOFK condition type to determine the GL account) and i am not supposed to do that? If i do not use a WBS, then, the posting happens (using KOFI) and the profitability segment is also determined.)
Please let me know if you need more information.
Your help is most appreciated.
Regards,
Mukund S

We closed this issue by changing the field status group for the GL account. Though this is not the perfect answer, we had to do it for the business need.

Error in Derivation and Profitability Segment

Hello Gurus,
I am two issues, which isnt allowing me to create a sales order in IDES.
I am referencing a quotation when i want to create the sales order. But i got a warning message 'error in derivation rule' and the log text has
                                                                                Error occurred in derivation rule. See long text
Message no. K/ 111
CO-PA Characteristic Derivation
Diagnosis
Step 0006 Country Ship-to   > Intern.Reg
No entry in a derivation rule was found for the specified source field
                                                                                The derivation rule was set up so that an error message appears when
     this happens.
The required derivation rule entry would need the following source
     fields:
Country Ship-to
I proceeded and the sales order couldnt save. An incompletion log pointing towards the profitability segment was generated. I have put the profit center, yet i have this issue.
Kindly help resolve it.
Thanks

Hi Luqman,
This issue is realted to the COPA Issue.
Please Try by giving the Profit Center at sales order Header by giving the Derivation rule and most important thing here is we have to mention the country of ship to here.
Please Reward IF Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Difference between New G/L Segment and Profitability Segment

Dear friends,
Can somebody explain what is the difference between New G/L segment and Profitability segment.
Thanks, Prakash

Hi,
Segment in New G/L is puerly for external reporting purpose.A segment is a sub area of a company for which has separate financial data and which has expenses and losses.For this segment we need virtually complete balance sheet for external reporting purpose.
Profitability segment is for analysis of profit within the organisation.A Profitability segment is a combination of different characteristic for which we want to analyse sales revenue and cost.These characteristic can be any thing for example customer, product, sales organisation etc.
For example We want to analyse what is the total sales of product A for customer group B under the sales organisation XYZ. Here profitability segment = Product+customer group +sales organisation

CRM Order: Error occurred during determination of profitability segment

Hello All,
I have created a Trade promotion in CRM, and maintained the determination condition and Discount condition for the combination of
Customer /Sales org /Product.
I have maintained settings for CO-PA in connected SAP ECC
When i create a sales order in CRM , trade promotion is determined in the order and also discount is considered in the order pricing.
When i save the order in CRM, an entry in the outbound queue of CRM is created with destination pointing to ECC, which is having the status: SYSFAIL.
The description of the error is :" Error occurred during determination of profitability segment "
Suppose when if i remove the trade promotion which was determined in the order and then save the order i dont get this error.
Hence could you please help me providing additional settings which should be done if we want to have TPM also.
Regards,
Naveen

Long Text message
An error has occured in the system ECPCLNT100 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
Transmission log
Error occurred during determination of profitability segment (Notification E IAOM 025)
Error occurred in derivation rule. See long text (Notification E K/ 111)
I pressed F8 to see the derivation strategy , but how do i figure out which characteristic/char value is missing / has the error.
Best Regards
Meghna

Profitability segment in Entry Data Profile CATS

Similar Messages

Maybe you are looking for