Proformance issue with 'sid generation on activation'

Hi Gurus,
In our BW(NW 2004) system we are using Cognos as reporting tool, due to process chain failure at DSO level we unchecked 'sid generation on activation' and chain running successfully after that.
unchecking will be a performance issue due to generating sid's at run time as per SAP.
My question is as i am using Cognos in place of BEX. what are the possiblities of effecting the performance and alll?
Please provide your valuable suggestions.
Thanks in Advance,
Suresh.

Hi Suresh,
Irrespective of what is the reporting front end you use, if you use this DSO for reporting it would generate the SID values at the runtime which will have huge impact on reporting performance. Just removing the SID generation option would temporarily fix the load issue, with quick activation of DSO but it will affect the most important area reporting performance.
Try to solve the issue with SID generation error while activating at the BW side which could be because of the special character issues and once you fix that your process chains would load fine with a far better performance while reporting on this DSO.
Regards,
Mani

Similar Messages

DSO with flag "SIDs Generation upon Activation" deactivated

Situation 1:
I am using a standard DSO. The flag "SIDs Generation upon Activation" is not set. Note 1392715 states:
"... If you deactivate this flag, reporting is still possible since missing SIDS will be created during the query runtime from 7.0..."
Question 1:
What is about characterstic values with already existing SIDS? Are they selected at query runtime? Are SIDS created during query runtime for all characteristic values, even if the characteristic value has got a physical SID in its master table? Gets a query on this DSO faster, when pyhsical SID will exist in the respect master tables?
Situation 2:
I am using an infoobject with flag "attribute only" in a standard DSO. The flag "SIDs Generation upon Activation" is not set in this DSO. This DSO is connected to a virtual virtual provider based on DTP. The query Q1 on the virtual provider reports the infobject with the flag "attribute only". The query Q2 on the DSO doe not report the infoobject with the flag "attribute only".
Question 2:
What is faster? A query on a virtual provider or a query on a DSO with flag "SID Generation upon Activation" is not set.

Hi,
Question 1:
What is about characterstic values with already existing SIDS? Are they selected at query runtime? Are SIDS created during query runtime for all characteristic values, even if the characteristic value has got a physical SID in its master table? Gets a query on this DSO faster, when pyhsical SID will exist in the respect master tables?
1. There will be there at base tables. Query runtime it won't select sids.
i think no, it creates sid for the records which don't have sid.
along with sid, its depend on the selections/filters/data volume on dso.
Question 2:
Query will be faster on dso. because virtual provider pulls data during report excution and may take more time than reporting on dso.
Thanks

Issue with check generation in Automatic Payment Program

Hi experts,
I need your inputs for an issue with check generation in Automatic Payment Program. Trying to make a payment to a US vendor with payment method C. The due item is getting picked up and a clearing document is getting generated. But Check is not being generated, niether can I see an entry in PAYR table. However, if I try to generate a check manually in FCH5 for the same clearing document, it is working.

Have u checked the Variant created in F110 - Printout / data medium, whether the Hose bank details are correctly set or not.
If yes, check the Printer details
Let us know the results
Thanks

OLM SCORM content issue with FLash Player 9 Active X version 9.0.115

Hi,
Does any one have issue completing SCORM online content (flash object) via OLM with FLash Player 9 Active X version 9.0.115 using IE? I have same problem also via mozilla.
I have two computer one with 9.0.45 and one with 9.0.115. I can complete the online course with version 9.0.45 without any issue but the status always incomplete with version 9.0.115. When using 9.0.115 it seem there is not communication between OLM player and the application (nothing showup in the java console).
I checked Adobe website and this is what they quoted:
ActionScript 2 getURL() and ActionScript 3 navigateToURL()calls such as getURL("javascript:myFunction();") fail with live web-server content if the HTML and SWF are in separate domains. This issue appears in Internet Explorer versions 6 and 7.

Dharma,
I just tried a piece of flash content using 9.0.115 on iLearning and had no issues, and this should be no different than OLM.
Is the SCORM Adapter set up and in use with debugging turned on? Do you see information in the java console when running the content using the other version of Flash?

Issue with Reset Password from Active Directory Integration Pack

I seem to be having some issues with a subscription in the Reset Password activity from the Active Directory Integration Pack. The "User Password" field refuses to take a value from a subscription provided earlier in a Generate Random
Text activity. As you will see in the screenshot below, when the Reset Password activity runs, the User Password value is blank.
Any idea why this might be happening? It looks like a possible bug with the Active Directory Integration Pack.

Hi John,
I think this is not a bug, this should be by design because the password is a secure string. If you look for the Published data for Reset User Password activity at
http://technet.microsoft.com/en-us/library/hh553463.aspx it is not listed there as well.
If you need the the string (e.g. to send it via email) use the
data from the "Generate Random Text" Activity.
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Font Issue with Report Generation Toolkit for Microsoft Office

I have been using this toolkit for only a few days now, but I just have to get this issue off my back. When developing a toolkit it would be a good idea to use the same cluster to represent fonts in ALL places. If you look at "Excel Set Graph Font" vs. "Excel Easy Table" they take two completely different clusters. Why? I don't know, but it is *very* annoying.
How could something like this slip through the cracks? Is there some reason why there is this discrepancy? From my perspective as a software engineer I see no excuse, but maybe someone else can justify this oversight for me. I just hope that I don't find any more issues with the toolkit...
Naveen.

Naveen,
what you said is true when dealing with same kind of objects, but in this circumstance, different cluster defines the font of a differnt object. For example, you may not want the user have as many options with defining the font for the X Y axis title as that for defining the text in the table. This is ture when you want your generated report to have similiar styles.
But this is certainly something we will think about, thanks for your constructive suggestion,
XD Gao
Application Engineer
National Instruments

Z10 Issues with GMail Imap / Microsoft Active Exchange

Hi,
I have seen lots of posts coming in on here and on crackberry.com about issues with emails. But I couldn't find any posts on the issues that I am having.
Just purchased a new Z10, coming from a BB 9900.
I would like to setup my gmail account on here but I am getting unexpected results. I have tried many different ways, gmail, imap, Microsoft Exchange ActiveSync and pop3.
What I find different from everyone is that I have a bunch of filters set up that auto direct some emails away from the inbox and into labels (folders). So I know things have changed from the 9900, but the way it happened on there was that a new email would show up in my unified inbox on the BB whether or not it was filtered. Then after reading it, I would have to search for it because it wouldn't actually be stored in the inbox. Which I was fine with.
We'll have my email description setup as "Personal"
Issues that I am having:
Imap set up:
- When I go from hub to my "Personal" box, it is a duplicate of my inbox. Looks the same as my inbox in mail.google.com, all nice and dandy.
- Emails that go directly to my inbox show up nice and quick and give me a notification in the hub etc.. that an email has shown up.
- Now when I receive an email that is being filtered. Gmail.com has it right away in my labels. So I know it's there. I can wait the 15/30 minutes that is setup for the sync, but I never get a notification of the email. If I go to the folder (by clicking on the drop down by the email description) then it shows up there with the yellow mail saying that it's a new mail. But there still isn't a notification saying I got a new email.
So that's IMAP.
M$ Exchange ActiveSync set up:
- Initially, going straight to my personal box from the hub makes it look somewhat like what it did on my 9900. Inbox, and filtered messages all showing up in the default view.
- If I receive a NEW (not part of a conversation) message that is/is not being filtered it shows up in this default view and I get a notification in the hub.
- Once I read that email, then go back to the default view. IF it is a msg in the inbox, it disappears and the only way I can find it is by going to the drop down then to the Inbox. But this seems to be random, sometimes it stays, sometimes it disappears. Also, if it gets moved directly to the inbox and I get a reply to that message I don't get a notification for a new email.
- If the email is a filtered email, it stays in the default view.
- Now if I get an email that is part of a conversation to a filtered email, I don't get a notification that I have a new email, but if I go to it from the hub, it's marked as a yellow mail symbol stating that it is new. Read that email, it stays in the default view.
So that's M$ EAS.
Email:
*******@gmail.com, so not a Paid Account or anything, just a regular gmail account. IMAP settings turned on and setup.
Hub Settings:
Display Style: conversation
Display order: name, subject
display message count: on
display new message indicator: on
show filed messages: on
show sent messages: off
Download images automatically: off
delete message confirmation: off.
Oh when I tried the gmail setup I believe it just used the same settings as IMAP. Pop3. just a disaster, all my messages were brought in (sent/receieved) marked as unread. Won't even bother with Pop3.
I'm not sure if I'm doing something wrong with my setups, or that this is the way it is designed. I really don't want to have to check each folder everytime to see if have a new email. And I don't want to change my gmail setup so that nothing is filtered. I thought I had solved it with the M$ EAS but with the random moving of messages to other directories, it's a no go aswell.
If anyone has any ideas or suggestions for me it would be greatly appreciated.
Thanks.
Curtis

Hi,
I'm the author of the article linked to above. I appreciate the reference, but I don't think my article solves the OP's particular issues. To date, I've not found a way to enable notifications on new content in subfolders. I think this is a limitation in the BlackBerry 10 email client.
Since the paint is still wet on this OS, we can expect to see some improvements in forthcoming service releases. CalDAV for example is known by BlackBerry to be broken with Google Calendar. No ETA to fix at present. BlackBerry will have to address that, and soon.
I don't yet know if OS 10 is going to gain the traction the BlackBerry needs to survive in the market. If it does, I suspect we will see some third party email apps appearing in BlackBerry World in the future, with enhanced IMAP functionality. There's some precedent for this and we've seen similar happen on other mobile platforms. In any case, until BlackBerry does some email client rewrting, or an enterprising developer plugs the gap, I think the OP's niggle is going to remain. At the time of writing, BlackBerry World is showing a White Screen of Death. Figures.
One thing I'd urge all Google Apps users (especially of free accounts) to bear in mind is that Google will be pulling the plug on ActiveSync in the very near future. I've blogged about this in more detail, in a followup to my previously-mentioned post: Gmail + Google Apps on the BlackBerry Z10.
I hope this clarifies the position, even though the reality is less than satisfactory.
Rob

Issue with Email generation using MAPI32.OCX and Outlook 2010

Our application use MAP32 OCX to generate an email with an attachment (PDF File), but no email address. The user will select the address from their contacts.
Right now we have an issue with some Outlook 2010 clients that after about 8 emails , Outlook has an issue and hangs.
Now if we do a mailto://[email protected] before we create the 8th email, Outlook 2010 doesn't hang. Is there any setting we can set in Outlook 2010 to prevent the "address checking" when the email is generated or do I have to fill
the email address with a "bogus" address that the user must then overwrite to prevent this from happening?
Thanks,
Chad Newman

Hello Chad,
Why do you need to use MAPI instead of OOM?
I'd suggest automating Outlook instead. See
How to automate Outlook from another program and
How to automate Outlook and Word by using Visual C# .NET to create a pre-populated e-mail message that can be edited for more information.
Also you may find the
C# app automates Outlook (CSAutomateOutlook) sample project helpful.

Issue with upper case in cyrillic characters - error with SID generation

Hi all,
I have a problem loading a cyrillic string into a characteristic in a DSO.
I get an error message when trying to activate the data in the DSO.
The characteristic is a CHAR18 with the "lowercase letters" unmarked and there is an abap
routine to convert the string in upper case.
According to the error message, the string seems to be converted because the error shows the string in upper case ( the input was in lower case) but the DSO data is not activated:
" Value 'НЕУСТОЙКА 3498' (hex. '041D0415042304210422041E0419041A041000200033003400')
of characteristic A2_ALLOCN contains invalid characters",
I am working in an unicode system and I don´t know what is wrong...
Any input will be highly appreciate it.
Thanks in advance,
Elena

Value 'НЕУСТОЙКА 3498'
Seems to be value contains invalid character. Й
If you need to populate invalid char into target maintain this in t- code RSKC , Then system allows the Invalide chars into the target
Donu2019t need edit this ivalue manually in PSA with required value and reconstruct from PSA.
With Regards,
Kishore.
Edited by: Siv Kishore on Apr 22, 2009 11:37 AM
Edited by: Siv Kishore on Apr 22, 2009 11:39 AM

Issue with SID's flag check on DSO

Hello,
I have a DSO with the SID's flag checked. With this check on, when I run a query, the query dumps or doesnt show data.
In RSRV when I do a test on this DSO, I get the following errors (which dont get corrected after running "correct error")
The SID values are missing for 1 specifications for characteristic ZCH_STDAT
The SID values are missing for 1 specifications for characteristic ZCH_TGFDT
The above two characteristics are referenced on 0DATE. Many records in the DSO have blank values from the source for the above date objects, which is expected as they might not be populated all the time.
We didnt have these issues before. It seems its a data related issue. But I am not able to pinpoint, as the load and activation goes smooth.
Would appreciate anyone's thoughts on this.
Thanks
Prakash

The message is telling you that you have a value in the DSO for InfoObjects ZCH_STDAT and ZCH_TGFDT which are not found in ZCH_STDAT and ZCH_TGFDT themselves.
This can happen when if you have chosen NOT to create master data as data is loaded to the InfoProvider.
Insure that all values found in the DSO are also found in the InfoObject, and everything will be fine.

Issue with RMAN DUPLICATE FROM ACTIVE DATABASE....

Hi All,
Not sure if I should continue from a closed thread, so apologies, opening a new one..
I ran the following command:
DUPLICATE TARGET DATABASE TO ' AUX1"
from ACTIVE DATABASE
NOFILENAMECHECK:
So the copy went in fine...so I am confiused now....why when doing a recover, i get the below errors from output:
archived log for thread 1 with sequence 68346 is already on disk as file H:\ORAC
LE_ARCHIVE_LOGS\RBS1\ARCHIVELOG\2013_12_08\O1_MF_1_68346_ARCH_D-RBS_ID-295728924
5_S-68346_T-1_A-780292253_C1OQVOSU_.ARC
archived log for thread 1 with sequence 68347 is already on disk as file H:\ORAC
LE_ARCHIVE_LOGS\RBS1\ARCHIVELOG\2013_12_08\O1_MF_1_68347_ARCH_D-RBS_ID-295728924
5_S-68347_T-1_A-780292253_C3OQVOU1_.ARC
archived log for thread 1 with sequence 68348 is already on disk as file H:\ORAC
LE_ARCHIVE_LOGS\RBS1\ARCHIVELOG\2013_12_08\O1_MF_1_68348_ARCH_D-RBS_ID-295728924
5_S-68348_T-1_A-780292253_C4OQVOU6_.ARC
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/08/2013 07:36:04
RMAN-03015: error occurred in stored script Memory Script
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of archived log for thread 1 with sequence 64713 and start
ing SCN of 12728145997 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64712 and start
ing SCN of 12728133322 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64711 and start
ing SCN of 12728121403 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64709 and start
ing SCN of 12727730726 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64708 and start
ing SCN of 12727717143 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64707 and start
ing SCN of 12727701799 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64704 and start
ing SCN of 12726617917 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64703 and start
ing SCN of 12726605080 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64702 and start
No archivelogs were purged or backed up and the current logs were retained....so im somewhat confused....i am not restoring from backup but running active duplicate...
should I re-run the command with:
SET UNTIL SEQUENCE 64713 THREAD 1

This fails saying that "ORA-12528: TNS:listener: all appropriate instances are blocking new connections" which is quite normal given that the listener is havig a handle in BLOCKED state for this AUXDB as it is in NOMOUNT state.
Could you please help me on how to proceed?
One option can be to create the controlfile manually and mount the instance before doing the duplicate. I hope Rman can continue from there.
Another option is to go for backup based duplicate.
Is there any other way to go?
Provide static registration on AUXILIARY side for your auxiliary instance and try again.For example change listener.ora file as
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = AUXDB)
      (ORACLE_HOME = <your oracle home>)
      (SID_NAME = AUXDB)
LISTENER =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = <auxiliary host/ip>)(PORT = 1521))
)And restart listener on auxiliary host then try again

Is anyone else having charging connection issues with their generation 4 ipad?

My generation 4 ipad is having charging connections. When I plug it in to charge with the charger that came with it, the part that connects right to the actual ipad is not always connecting. Sometime I have to wiggle it around or angle it until I hear the sound of connection and can see on the screen that it is actually charging. Sometimes I will charge it and when I leave it is in charge mode but when I come back to check on it, it never charged at all. Is anyone else having this problem or know what might be wrong? I would think a brand new ipad wouldn't have a charging problem right out of the box.

Hi gruhland,
Thanks for your reply. It sounds like your device is actually in a restart loop, which is different from the process of a soft reset. Specifically, what I wanted you to try is this:
Resetting your device
If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
If resetting does not break the restart loop, it sounds like a different direction may be warranted here. Due to the nature of your issue you may find more assistance by using another one of Apple's support resources:
http://www.apple.com/support/contact/
Take care,
- Ari

Issues with PCI-e drivers activating in XP Pro (system keeps crashing)

Hi,
I've just put together a new system:
580W Hiper PSU
MSI X1950PRO 256MB
MSI K9A Platinum
2GB Patriot Extreme Performance DDR2 PC6400 (Eased Latency Memory)
Athlon 64 x2 3800 am2
The problem I am experiencing is that I cannot get the ATI drivers to load into the OS without causing a crash. After looking at the error code that XP spits out when the crash occurs it seems to happen right when the video card driver is loaded at which point it blue screens and gives me a memory error. I know absolutely nothing about overclocking but I have tried everything I can think of with this RAM and cannot seem to figure out what the problem could be. This is the second card I am on so I know it's not the video card. I have tried the memory in different slots, tried one stick at a time, tried using different timings and no matter what I do I keep seeing this error. In a fit I ran MemTest and found nothing wrong with the memory. Has anyone else ever seen this happen before and if so what has been the fix? Is it possible that the K9A and the memory just don't play well together? Could it be some sort of timing issue? I loaded Windows fine using it so I am guessing it's not. I currently have it running at 800MHz could that be the problem? Would slowing it down make any difference? I did notice that although the BIOS does allow quite a bit of flexibility for overclocking that one of the things that cannot be changed is the memory voltage (which seems to be set at 1.90V).
If anyone has any suggestions I would really appreciate it as I have lost about a week working on this now and have about $800.00 tied up in a completely unusable system.
Thanks.

Quote from: BOSSKILLER on 16-March-07, 00:24:06
hello, welcome to forum.
have you installed chipset drivers 1st, before VGA drivers?
list PSU details. (can be found into PSU sticker)
ensure memory sticks are located into 1st DIMM1 slot close to CPU socket and DIMM3.
go to BIOS "LOAD BIOS OPTIMIZED DEFAULTS", apply memory vcore to 2.0V or 2.1V.
get a copy of Memtest86 and test memory for errors.
Hi, thanks for taking my post BOSSKILLER. The PSU specs are as follows:
Hiper HPU-4B580 PSU
ATX 12V v2.2
580W
Dual+12V = Yes
Output = +3.3V@30A,+5V@36A,+12V1@20A,+12V2@18A,[email protected], [email protected]
Input Current = 10 A
SLI and Crossfire certified
I've run MemTest x86 on the memory several times and did not fine any errors however I am now curious about the memory itself VS what the board can handle. After going through all of the specs on the board (please bear with me here as I am "memory illiterate") it would appear the the board can only handle the memory running at 1.8V as this is what I see from the system specs for the board from MSI:
Supports Dual DDR2 533/667/800
- 4 DDR2 DIMMs (240-pin / 1.8V)
- Supports a maximum memory size up to 8GB.
OK, so going with the fact that I know next to nothing about memory speeds and how voltages play a part in them I know that the last memory that I just sent back to NewEgg was a Patriot Extreme Performance DDR2 2GB PC2-6400 Eased Latency DIMM Kit (PDC22G6400ELK). It's timings for 800MHz were 5-5-4-9 with +1.9 for voltage. I had everything in the BIOS for the memory set for AUTO and from what I could see it was being detected at 800MHz memory however if I am interpreting what MSI is saying about this board (and this is where I am really confused) it only supports 1.8V type memory? If so then I am really in trouble as I just ordered some replacement memory which is Kingston HyperX and it's timings are (for 800MHz) 4-4-4-12 at +2.0V and (for 667 MHz) 5-5-5-15 at +1.8V. If I understand this equation correctly it would appear that this board cannot handle memory running over +1.8V and it seems that (in spite of the fact that it claims to support 800MHz speed memory that is only if you can purchase memory that will run at 800 MHz while only consuming +1.8V (does that sound correct?) The bottom line is that there was probably nothing wrong with that Patriot memory I just didn't know what I was doing. I did notice in the BIOS when I looked at what it detected that it was running by default at 800MHz but the voltage was +1.9 vs. the +1.8 that the manual says it will support. Could that be what all my problems have been with not being able to get these drivers working? That the second the part of memory that the drivers need to access is "accessed" because of the difference in voltage that XP panics and immediately "blue screens"? Let's just go out on a limb here and say that I'm correct then what I am really being told is that this board will not support either of these memory modules running at PC6400 and that I will have to drop the speed down to PC5300 (or 667MHz) in order to get the +1.8V that the board supports to make the system stable?
How far off-base am I? (Let me know as soon as you can as I am eager to know whether I just wasted more money. Thanks!)

I have sound issues with third generation ipod touch, how do i fix it?

I have the iPod touch 3rd generation and the sound is staticed or not playing at all. it was of and on now it is always staticed or not playing. I brought it to best buy were I got it and they couldn't do anything because it had a small crack, now it has a larger crack got when I pressed down on the bottom of the iPod. I haven't been able to update my iPod since I got it in October of 2009. I tried about a week ago and it took over 3 days for it to even start the first step of backing the iPod up.
any ideas to what i sould to to fix it?(besides getting a new one)

Try here:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519Some of the music redownload is only available in the USA with the latest iTunes version.

Issue with calling a method activity before page render

Hi All,
I am using Jdeveloper 11.1.1.7.
I am trying to achieve the approach defined in "1.b. Calling a Method in Backing Bean:" elaborated in the blog - https://blogs.oracle.com/adf/entry/an_epic_question_how_to
As illustrated, I defined a default method activity (binding to a method in managed bean) and a view activity activity in a bounded task flow.
When I launch the application (running the view activity), following error is encountered -
oracle.adf.controller.metadata.ParsingException: ADFC-02020: Cannot find default activity 'check' in task flow definition '/WEB-INF/task-flow-definition.xml#task-flow-definition'.
    at oracle.adfinternal.controller.metadata.model.xml.XmlUtil.createAndLogParsingException(XmlUtil.java:474)
    at oracle.adfinternal.controller.metadata.model.xml.MetadataResourceXmlImpl.parseTaskFlowDefinition(MetadataResourceXmlImpl.java:507)
    at oracle.adfinternal.controller.metadata.model.xml.MetadataResourceXmlImpl.parse(MetadataResourceXmlImpl.java:361)
    at oracle.adfinternal.controller.metadata.provider.mds.MdsMetadataResourceProvider.parseResource(MdsMetadataResourceProvider.java:748)
    at oracle.adfinternal.controller.metadata.provider.mds.MdsMetadataResourceProvider.getMDSCachedResourceOrParse(MdsMetadataResourceProvider.java:732)
Please advise.
Best Regards,
Ankit Gupta

Hi Cvele, Timo,
Many thanks for the suggestions.
To avoid confusions, I have created a new application altogether. It seems that the method call is not being called when I run the page.
For your reference I have attached the task flow definition and method code below -
Task Flow Definition
<?xml version="1.0" encoding="windows-1252" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<task-flow-definition id="task-flow-definition">
    <default-activity id="__1">methodCall1</default-activity>
    <managed-bean id="__11">
      <managed-bean-name id="__13">TestBean</managed-bean-name>
      <managed-bean-class id="__10">TestBean</managed-bean-class>
      <managed-bean-scope id="__12">request</managed-bean-scope>
    </managed-bean>
    <view id="view1">
      <page>/view1.jspx</page>
    </view>
    <view id="exception">
      <page>/exception.jspx</page>
    </view>
    <method-call id="methodCall1">
      <method>#{requestScope.TestBean.checkURL}</method>
      <return-value id="__15">#{TestBean.checkURL}</return-value>
      <outcome id="__14">
        <to-string/>
      </outcome>
    </method-call>
    <control-flow-rule id="__2">
      <from-activity-id id="__3">methodCall1</from-activity-id>
      <control-flow-case id="__5">
        <from-outcome id="__6">go</from-outcome>
        <to-activity-id id="__4">view1</to-activity-id>
      </control-flow-case>
      <control-flow-case id="__8">
        <from-outcome id="__9">error</from-outcome>
        <to-activity-id id="__7">exception</to-activity-id>
      </control-flow-case>
    </control-flow-rule>
</task-flow-definition>
</adfc-config>
Method Code
public String checkURL() {
// Add event code here...
System.out.println("method activity called");
return "error";
Best Regards,
Ankit Gupta

Proformance issue with 'sid generation on activation'

Similar Messages

Maybe you are looking for