Prog/Function Module which call during pressing the button "Pattern" inSE38

Dear Guru,
I have encountered an issue : issue is like that I want the name of the function module/ program which invokes as soon as we press the "Pattern" Button in Application tool bar of ABAP se38 editor.
Please help.
Thanks & regards
Saifur Rahaman

Dear Guru,
I have Encountered an Issue.
The Scenario Is like this :-
As soon as we create a new prog using SE38 it automatically generates a standard pattern like below :
*& Report ZSR_TEST_05
REPORT ZSR_TEST_05.
But the requirment is like this as soon as we create a new prog using SE38 it automatically it should generate the The Pattern like below :--
*& Project            :
*& Program Name       :
*& Transaction Code   :
*& Program Type       :
*& Functional Domain :
*& Technical Coding   :
*& Functional Guidance:
*& Coding Review      :
*& Spec. Review       :
*& Program Description:
REPORT ZSR_TEST_05.
After going through sdn documentation i have identified that using dynamic pattern we can create this and call that dynamic pattern using PATTERN button in ABAP editor.
But the thing we require as soon as we generate the prog thr. SE38 atomatically all the details must generate before the report <report_name>.
For achieving thins what i have to do ... please show me some path to achieve this
Duplicate locked
Edited by: Rob Burbank on Oct 31, 2009 3:26 PM

Similar Messages

CRM : I want a function module which would give me the Sales Org Short

I have to fetch Sales Organisation Short from the Data base to check whether it is updated or not and i also need the old value in CRMD_ORDER. I need a function module that would get me the Sales Ogansiation Short for the Old Sales Organisation i have. Urgent Please....

this kind of an authentication is not possible with the linksys SOHO products...it could be possible with the enterprise level products..
however, you can set up a wireless security on the wireless access point and this requires every user to enter the passcode to connect to the network...here , one problem could be that once connected to the network , the password will be saved on the user's computer...they need not enter the password again...
the set up you can have is like
modem -> a wired router -> WAP54GPE
the next WAP54GPE will be configured in wireless repeater mode...the number of WAPs will depend on the kinda range you want...the range of a WAP54GPE is around 300 fts....

Is there a BAPI function module which reverses the sign of an integer

Hi Friends,
                 Could u plz tell me a BAPI function module which can reverse the
sign of an integer ?
For example:
if i get the integer value in work area as <number> <sign> , i need to change it to <sign><number>.
i.e if i get the integer value in work area as    "248-" ("-" indicates minus sign) to " -248 ".
i.e if i get the sign after the value , my requirement is to get the sign before the value.
The actual ABAP query is:
data: QTY_1 TYPE CHAR10,
        QTY_2 TYPE CHAR10,
        WA_DISTK_PORTLET-QUANTITY TYPE INT4.
QTY_1 = WA_DISTK_PORTLET-QUANTITY.
                SEARCH QTY_1 FOR '-'.
        IF SY-SUBRC = 0 AND SY-FDPOS <> 0.
          SPLIT QTY_1 AT '-' INTO QTY_1 QTY_2.
          CONDENSE QTY_1.
          CONCATENATE '-' QTY_1 INTO QTY_1.
          CONDENSE QTY_1.
        ELSE.
          CONDENSE QTY_1.
        ENDIF.
        CLEAR: WA_DISTK_PORTLET-QUANTITY.
     MOVE : QTY_1 TO WA_DISTK_PORTLET-QUANTITY.
when i move this QTY_1 to work area quantity field The sign is coming after the numeric value.
Note: There is no possibility to change the datatype of quantity field.
I have tried my level best with 'CLOI_PUT_SIGN_IN_FRONT' function module.
I will assign full points to the correct function module.

Hi Ram,
try this ang look into fields.
data: fields type table of SVAL with header line.
fields-tabname = 'MARA'. fields-fieldname = 'MATNR'. append fields.
fields-tabname = 'BKPF'. fields-fieldname = 'BUDAT'. append fields.
CALL FUNCTION 'POPUP_GET_VALUES'
EXPORTING
    POPUP_TITLE           = 'Value Insert'
TABLES
    FIELDS                = fields.
Regards, Dieter

Which Function Module is used for converting the DATE in BDC

HI,
Which Function Module is used for converting the DATE Format in BDC for Uploading purpose please help me.

data : date like sy-datum.
data : odate(10) type c.
date = sy-datum.        " in format YYYYMMDD
CALL FUNCTION 'CONVERSION_EXIT_PDATE_OUTPUT'
EXPORTING
   input         = date
IMPORTING
   OUTPUT        = odate         .
write:/ odate. "in ur format '.
1.
In ur itab make a field for date as 10 characters and use this Fm to store the date .
2. Pass the date as the charcter field to the screen and now check .

Calling a remote enabled function module which does not exist in caller sys

Hi,
I have a a system ABC from which I am trying call a rfc enabled fm(Test) present in system XYZ.
The fm(Test) does not exist in the system ABC so I am getting generation errors and dumps.
Is there a way for me to call these remote enabled function modules which does not exist in the caller system without the obvious errors etc.
Is there any special way.
Thanks

Hi,
please check this sample:
REPORT zcallfm                                 .
DATA: xv_return TYPE sysubrc.
CALL FUNCTION 'DOESNOTEXIST'
DESTINATION   'NOWHERE'
EXPORTING     caller                = sy-sysid
IMPORTING     return                = xv_return
EXCEPTIONS    system_failure        = 1
              communication_failure = 2
              OTHERS                = 4.
It shouldn't throw any generation errors in your system!
Regards,
Klaus

What is the function module which is used to trigger email

Hi ALL,
can u send me the function module which has to trigger email when sales order was saved.
kindly send me the inputs
thanks & regards
naveen
Moderator Message: Basic Question. Thread locked.
Edited by: kishan P on Nov 11, 2010 10:56 AM

Hi,
This needs to coded in the Save User Exit of the Sales Order Include MV45AFZZ (USEREXIT_SAVE_DOCUMENT) and use the Function Module "SO_DOCUMENT_SEND_API1" to trigger a mail.
Please try this and let me know if any.
Regards,
Srinivas
Moderator Message: Do not answer Basic Question.
Edited by: kishan P on Nov 11, 2010 10:58 AM

Function module which could calculate the previous month's start date.....

hi,
I want a function module which could calculate the previous month's start date and end date...
Say todays date is like 29.05.2007(start date) it should return
01.04.2007 and 30.04.2007...
IS there any FM for this ... or how to go about this scenario ???
thanks in advance
samm

See the below Logic :
DATA :g_date(2) TYPE n,           " Date
      g_month(2) TYPE n,          " Month
      g_year(4) TYPE n ,          " Year
      g_bill_low(10) TYPE n,       " From date
      g_bill_high(10) TYPE n,      " To date
      g_month1(2) TYPE n,         " Month
      g_year1(4) TYPE n,          " Year
      g_date1(2) TYPE n,          " Date
      g_year2(4) TYPE n,          " Year
      g_datum LIKE sy-datum.      " System date
RANGES : r_bdate FOR vbrk-fkdat.             " Billing date
g_datum = p_date + 10.
g_month = g_datum+4(2).
g_year = g_datum+0(4).
IF g_month = 1.
    g_year = g_year - 1.
    g_month = 12.
    g_date = 1.
ELSE.
    g_month = g_month - 1.
    g_date = 1.
ENDIF.
Passing the date to billing date-low
CONCATENATE g_year g_month g_date INTO g_bill_low.
r_bdate-low = g_bill_low.
r_bdate-sign = 'I'.
r_bdate-option = 'BT'.
g_month1 = g_datum+4(2).
g_year1 = g_datum+0(4).
IF g_month1 = 1.
    g_year1 = g_year1 - 1.
    g_month1 = 12.
ELSE.
    g_month1 = g_month1 - 1.
ENDIF.
CASE g_month1.
    WHEN 1.g_date1 = '31'.
    WHEN 3.g_date1 = '31'.
    WHEN 4.g_date1 = '30'.
    WHEN 5.g_date1 = '31'.
    WHEN 6.g_date1 = '30'.
    WHEN 7.g_date1 = '31'.
    WHEN 8.g_date1 = '31'.
    WHEN 9.g_date1 = '30'.
    WHEN 10.g_date1 = '31'.
    WHEN 11.g_date1 = '30'.
    WHEN 12.g_date1 = '31'.
ENDCASE.
g_year2 = g_year1.
IF g_month1 = 2.
    g_year2 = g_year2 MOD 4 .
    IF g_year2 = 0.
      g_date1 = 29.
    ELSE.
      g_date1 = 28.
    ENDIF.
ENDIF.
Passing the date to billing date-high
CONCATENATE g_year1 g_month1 g_date1 INTO g_bill_high.
r_bdate-high = g_bill_high.
APPEND r_bdate.
Reward Points if it is helpful
Thanks
Seshu

Functional module which get triggered after posting of the document F-22

Hi,
I am posting the documents using the transaction F-22. I need to update some table after the documet will get post.
I try to find out the BTE'S in the transaction FIBF but unable to find it out.
Can anyone help me to find out the relvant functional module which will get triggered after the posting of the documents.
Please help me with this.
Thanks in advanced.
Regards,
Darshana

Hi Harini,
It is also not get triggered while i am posting the documents.
Can you please suggest me some more functional modules.
Thanks in advanced.
Regards,
Darshana

Function module which sort the entries in Table maintance generator

hi
I want to know the function module which is used to sort the entirs in table maintance genrator.
Thanks

Hi,
Go to the TMG program .You can change the code there.
Rgds,
Anversha

I need to create RFC function module which creates the IDOC

Hi-
Any idea how to create RFC function module which creates the outbound IDOC. If you have any sample code please forward to me.
Thanks,
Sony

My Problem is
Whenever they create Invoice using T-code's like FV65(Parked Document), automatically should create IDOC's...
I have used message type FIDCC1 but this message type is usefull only for Posting documents.
1. Whenever they create parked document, entries will be stored in BKPF(Parked Document-Filed-BKPF-BSTAT = 'V') and Bseg....
2. I have to read entries from those tables and should create IDOC...
3. I checked FM's(FI_IDOC_CREATE_FIDCC1, FI_IDOC_PREPARE) but are not useful...
4. Now I need to write one RFC function module and that FM should create the IDOC's....
Can anyone please help me out?
Thanks,
Sony

Function module which changes the Storage Unit (SU) Block Data like LS32

Hi,
Is there any Function module which changes the Storage Unit (SU) Block Data as done in LS32.
Thank you,
Prashanth A.

Hello Pablo.
Yes we did run LT04 and it does encounter that same error message after clicking the Stock Removal button. But eventually error msg will be removed by entering the value at the Storage Unit Type field because it directly fills in LTAP-LETYP.
We have resolved that the function module will not really fill the desired Storage unit type therefore TO background creation is not feasible in our scenario (non-SU managed transfer to SU-managed storage type). And I found this thread too: http://scn.sap.com/thread/1947358
So issue is still open but we have considered of changing the process since this is still just a new scenario for us.
Thanks a lot for your inputs!

Functional Module which can send FAX

Hi All,
Can you please suggest a function module which we can use to send fax. We wanted to fax the output list genrated by the program.
Regards,
Vidya.

The following program shows you how to send a fax from within ABAP/4. The report is delivered
in the standard system and is used in Transaction SCOM for the function "Send test fax".
Only the method via the call of SAPscript with DEVICE='TELEFAX', described below, ensures the
generation of a correct transmission request, independent of the R/3 release and of the used
fax server solution and its configuration.
The regular printing (for example, with NEW-PAGE PRINT ON...) on an output device created in
the spool administration of the device class 'Telefax' does generally not work!
REPORT RSKSENDF MESSAGE-ID SK.
Test report to send a test fax
sends a fax to the number <TO_CNTRY>-<TO_NMBER>
containing an automatically generated message text.
TABLES: USR03.
PARAMETERS: TO_CNTRY LIKE T005-LAND1 OBLIGATORY,
TO_NMBER LIKE TSP01-RQTELENUM OBLIGATORY,
FROM_USR(30) TYPE C DEFAULT SY-UNAME,
TO_RECIP(30) TYPE C DEFAULT SY-UNAME.
SAPscript content ITAB
DATA: BEGIN OF TEST_DOC OCCURS 10.
INCLUDE STRUCTURE TLINE.
DATA: END OF TEST_DOC.
SAPscript header struct
DATA BEGIN OF HEADER.
INCLUDE STRUCTURE THEAD.
DATA END OF HEADER.
INITIALIZATION.
get county from user addres in usr03
system->user profile->user address
check if not empty
SELECT SINGLE * FROM USR03 WHERE BNAME = SY-UNAME.
IF SY-SUBRC = 0 AND USR03-LAND1 SPACE.
TO_CNTRY = USR03-LAND1.
ENDIF.
START-OF-SELECTION.
PERFORM FILL_UP_TEST_DOC.
PERFORM SHOW_TEST_DOC.
AT PF08.
PERFORM SEND_FAX TABLES TEST_DOC USING TO_CNTRY
TO_NMBER.
AT SELECTION-SCREEN ON TO_NMBER.
PERFORM CHECK_NUMBER USING TO_CNTRY TO_NMBER.
*& Form CHECK_NUMBER
FORM CHECK_NUMBER USING
COUNTRY
NUMBER.
DATA: SERVICE LIKE TSKPA-SERVICE VALUE 'TELEFAX',
LEN LIKE SY-FDPOS.
FIELD-SYMBOLS
windows GUI push the ? from mandatory input instead
of overwriting it
LEN = STRLEN( TO_NMBER ).
IF LEN > 1.
SUBTRACT 1 FROM LEN.
ASSIGN TO_NMBER+LEN(1) TO
IF
= '?'.
= SPACE.
ENDIF.
ENDIF.
official check FM
CALL FUNCTION 'TELECOMMUNICATION_NUMBER_CHECK'
EXPORTING
COUNTRY = COUNTRY
NUMBER = NUMBER
SERVICE = SERVICE.
on old 21?/22? release you may have to handle the
exception
because the Function uses RAISE instead of
MESSAGE... RAISING....
ENDFORM. " CHECK_NUMBER
*& Form FILL_UP_TEST_DOC
fills test text in itab TEST_DOC *
real life example needs to get real life data *
FORM FILL_UP_TEST_DOC.
DATA: DATUM(12) TYPE C,
UZEIT(10) TYPE C.
SAPscript initialization
of course, you may want to set a few parameter
(FORM,LAYOUT,....)
CALL FUNCTION 'INIT_TEXT'
EXPORTING
ID = 'ST '
LANGUAGE = SY-LANGU
NAME = 'FOO-BAR'
OBJECT = 'TEXT'
IMPORTING
HEADER = HEADER
TABLES
LINES = TEST_DOC
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC 0.
MESSAGE A400 WITH 'INIT_TEXT'.
ENDIF.
PERFORM ADD_EMPTY_LINE.
WRITE: SY-DATUM TO DATUM.
WRITE: SY-UZEIT TO UZEIT.
PERFORM ADD_LINES USING 'This is test Telefax'(001)
DATUM UZEIT.
PERFORM ADD_EMPTY_LINE.
PERFORM ADD_LINES USING 'From: &'(002) FROM_USR SPACE.
PERFORM ADD_LINES USING 'To: &'(003) TO_RECIP SPACE.
PERFORM ADD_LINES USING 'Fax number: & &'(004)
TO_CNTRY TO_NMBER.
PERFORM ADD_EMPTY_LINE.
PERFORM ADD_LINES USING
'This is a test fax send by Report RSKSENDF'(005)
SPACE SPACE.
PERFORM ADD_LINES USING 'on SAP system & '(006)
SY-SYSID SPACE.
PERFORM ADD_EMPTY_LINE.
PERFORM ADD_LINES USING
'the quick brown fox jumps over the lazy dog.'(101)
SPACE SAPCE.
PERFORM ADD_LINES USING
'THE QUICK BROWN FOX JUMPS OVER THE LAZY DOG.'(102)
SPACE SAPCE.
PERFORM ADD_EMPTY_LINE.
PERFORM ADD_LINES USING 'End of test'(007) SPACE
SPACE.
ENDFORM. " FILL_UP_TEST_DOC
*& Form ADD_LINES
printf a line an appends it in test_doc *
--> cformat format.
--> p1 param1
--> p2 param2
FORM ADD_LINES USING CFORMAT P1 P2.
TEST_DOC-TDFORMAT = '/'.
TEST_DOC-TDLINE = CFORMAT.
IF TEST_DOC-TDLINE CA '&'.
REPLACE '&' WITH P1 INTO TEST_DOC-TDLINE.
IF TEST_DOC-TDLINE CA '&'.
REPLACE '&' WITH P2 INTO TEST_DOC-TDLINE.
ENDIF.
ENDIF.
APPEND TEST_DOC.
ENDFORM. " ADD_LINES
*& Form ADD_EMPTY_LINE
appends an empty line to test_doc *
FORM ADD_EMPTY_LINE.
TEST_DOC-TDFORMAT = '/'.
CLEAR TEST_DOC-TDLINE.
APPEND TEST_DOC.
ENDFORM. " ADD_EMPTY_LINE
*& Form SHOW_TEST_DOC
lists the test doc for aproval *
*>>>> this is for fun only because PRINT_TEXT also
offers a preview *
FORM SHOW_TEST_DOC.
FORMAT COLOR COL_BACKGROUND INTENSIFIED OFF.
WRITE: / 'Test fax would look like this:'(020).
ULINE.
SKIP.
LOOP AT TEST_DOC.
IF TEST_DOC-TDLINE SPACE.
WRITE:/ TEST_DOC-TDLINE.
ELSE.
SKIP.
ENDIF.
ENDLOOP.
SKIP.
ULINE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE: 'Press PF8 to send it'(021).
ENDFORM. " SHOW_TEST_DOC
*& Form SEND_FAX
send fax by calling SAPscript *
Note: Instead of using PRINT_TEXT you may also *
call OPEN_FORM / WRITE_FORM_LINES / CLOSE_FORM, *
this allows you to use a similar program structure *
as with NEW-PAGE PRINT ON / WRITE / NEW-PAGE PRINT
OFF *
FORM SEND_FAX
TABLES DOC2FAX STRUCTURE TEST_DOC
USING COUNTRY
NUMBER.
DATA: SID(5) TYPE N.
DATA BEGIN OF POPT.
INCLUDE STRUCTURE ITCPO.
DATA END OF POPT.
DATA BEGIN OF PRES.
INCLUDE STRUCTURE ITCPP.
DATA END OF PRES.
CLEAR POPT.
POPT-TDCOPIES = 1. " one copy
POPT-TDDEST = " done internaly by script,
POPT-TDPRINTER = " do not fill !!!
POPT-TDNEWID = 'X'. " do not reuse old spool request
POPT-TDDATASET = 'TEST'(022). " fill as you want
POPT-TDSUFFIX1 = 'FAX'(023). " fill as you want
POPT-TDSUFFIX2 = SY-UNAME. " fill as you want
POPT-TDIMMED = 'X'. " send now
POPT-TDLIFETIME = 8. " keep 8 days in spool
POPT-TDTELENUM = NUMBER. " number without country code
POPT-TDTELELAND = COUNTRY. " country of recipient
POPT-TDCOVER = 'test fax'(024).
POPT-TDCOVTITLE = 'test fax'(024).
POPT-TDIEXIT = 'X'.
CALL FUNCTION 'PRINT_TEXT'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX = ' '
ARCHIVE_PARAMS = ' '
DEVICE = 'TELEFAX' "<<< here we say: fax it !
DIALOG = 'X'
HEADER = HEADER
OPTIONS = POPT
IMPORTING
RESULT = PRES
TABLES
LINES = DOC2FAX
EXCEPTIONS
OTHERS = 01.
do not bother with exception in sample code
CANCELED = 01
DEVICE = 02
FORM = 03
OPTIONS = 04
UNCLOSED = 05
UNKNOWN = 06
FORMAT = 07
TEXTFORMAT = 08
EXTERNAL = 09.
IF SY-SUBRC = 0.
arriving here means we could send:
SID = PRES-TDSPOOLID.
IF SID > '00000'.
MESSAGE S433 WITH SID.
ENDIF.
LEAVE .
ELSE.
do not bother with exception in sample code
MESSAGE A400 WITH 'PRIN_TEXT'.
ENDIF.
ENDFORM. " SEND_FAX
Regards.

How to debug a remote function module in calling system? Help!

Hi Experts,
   I have a ABAP report (in System A) from where I am calling a remote function module which exists in a different system B.
ABAP Program(System A)<----calls--
RFC(System B)
Can I debug the RFC funnction module in system A using ABAP debugger? In other words if i put a breakpoint on the "call function" statement then in debug mode I want to see that the control is going to system B and I should be able to process the FM code line by line. Is this possible?
Is there any special transaction or settings?
Is there any alternative?
Please help
Thanks
Gopal

hello,
Try this method.
first check whether RFC connection is working b/w 2 systems.
if connection is working, then do like this.
In System B , put endless loop in FM before some main select statement.
like
DATA : v_a TYPE c VALUE space
DO .
   IF v_a = 'X'.
     EXIT.
   ENDIF.
ENDDO.
the above code will be endleep loop.
In system A, when cursor goes to CALL FUNCTION DESTINATION 'XXXXX'.
u shud be logged in system B. the moment control comes to system B.goto tcode SM50 . check ur username . choose that particular checkbox then in menu bar --> program/session --> Program --> Debugging.
i hope it will help u.
try & let us know.
Thanks,
Manjunath MS

Status : 51- Incorrect function module IDOC_INPUT_MATMAS01 called up

Hello,
File - IDOC
in MONI, checkered flag is shown up and when I go the R3 server, WE05, I get error message
Status : 51
Incorrect function module IDOC_INPUT_MATMAS01 called up
I am using MATMAS04 without extension and updated the same in WE57. also checked in WE42 (MATM)
now, how do I proceed furthur related the above error message?
Regards,
Nikhil.

can very much
check your partner profiles PROPERLY. If u have the same IDoc type in 2 different partner profiles, check the 2nd one for it's process code. Isn't it the one, which is called after your Idoc is received? Processing code in partner profile is not based only on Idoc Type, but also on Message Type, Message Code and Extension. If the 2nd profile contains the process code, which is called, then check your incoming idoc for header values. May be this is causing your problem.
Peter

RFC enabled function module using call transaction

Hi,
We have a scenario wherein we have a RFC enabled function module which inturn uses a call transaction to create a PM order & attaches the PM notification against it. Sometimes it so happens that the order does not get created for some reason or the other and there are no logs generated on the system to investigate. However we are capturing the messages produced via the BDCMSGCOLL. At present we are using the update parameter as 'L'.
In some scenarios it states that the notification is locked by the same notification and comes out without creating the order, in this process we are losing out on the order & the notification number which if successful would have got updated in the database.
I know this could be done via the BAPI, but there are innumerable steps within the BDC which can't be actually done using the BAPI and hence we could not use this procedure.
Is there any other way by which we can ensure that there's always a successful order creation, I mean without losing out on the order/notification number?. Would changing the update mode to 'S' help?. Since this process is time bound, it can't actually take more time then what its taking with the current logic.
Please let me know if you require further details on the same. Any help in this regard would be highly appreciated.
Regards,
Vidya

Sorry for an unclear replay.
In Simple terms; I have 2 scenarios;
Launch a new tab (IW38 tcode), on click of a button in SAP screen of custom transaction in NWBC.
Launch a new tab (IW38 tcode), on click of a button in a Non - SAP App opened (using URL) in NWBC.
For 1st case, i have used
CL_NWBC=>URL_CONSTRUCT
EXPORTING
     CANVAS_WDA__CLIENT_TYPE       = 'nwbc'
     CANVAS_TRANSACTION            = 'IW38'
RECEIVING
     URL                           = lv_URL.
CALL METHOD CL_NWBC=>URL_LAUNCH
   EXPORTING
     URL    = lv_url
But it gets open in NWBC HTML not in NWBC Desktop client.
I tried all the Parameters you have mentioned in your response to this post earlier, but nothing worked. the last one is CANVAS__WINDOW which actually hides the top area and few buttons but still it is a HTML version.
If i set the HTML_CLIENT = ABAP_FALSE, it launches a new window instead of the tab and asks for Login. If i login in can see the IW38 in NWBC desktop client. But the only problem is we have the restriction of single window/single login for users.
I am on NWBC PL12 and also updated the GUI 7.3 to PL8.
Simply the problem is URL_CONSTRUCT for any transaction is launching it in a new tab but in HTML Version.
For 2nd case,
It asks for the login details on click of a button on the 3rd party URL opened in NWBC. which means i am launching SAP from a 3rd party.
Is there any way to achieve the launch of new tab in this case instead of the new window ?
I hope its more clear now.
Regards,
Nik.

Prog/Function Module which call during pressing the button "Pattern" inSE38

Similar Messages

Maybe you are looking for