Program adds clips to end of movie

After I finish my project and input it into idvd, added clips were added to the end of the movie by the program. I went in and took out clips and re-entered them, cleaning up the added clips, re-entered it into the idvd program and again clips were added.
Any suggestions?
I have never experienced this before, am using imovie 5.0.2

Also, the clips do not show on the time line of the imovie project but after the movie the time line continues white but the movie continues from approx. the middle of the project. There is no way for me to delete anything.

Similar Messages

Lost sound in some film clips when finishing project. Using iMovie 11, after adding music to photo section, could not get sound back in 2 film clips at end of movie. Beginning clips ok. How do I restore sound? Thx.

Lost sound in some film clips when finishing project. Using iMovie 11, after adding music to photo section, could not get sound back in 2 film clips at end of movie. Beginning clips ok. How do I restore sound? Thx.

Everything in your project will be exported when you use the share menu.
If you want to export only half, I suggest that you
1) Select the project in the Project Library.
2) Click FILE/DUPLICATE PROJECT
3) Give the duplicate a name, like Project A snippet.
4) Open the duplicate project in the Project editor and delete the segments that you do not need.
5) Then Share.
You mentioned surrounding a portion of the clip you were editing in Yellow. Once you do this, you should right-click and then select either DELETE SELECTION, TRIM TO SELECTION, or one of the other options available. That is a key tool in editing.
You mentioned MPEG Streamclip. I agree that MPEG Streamclip is a great tool.

How add delay at end of movie

Hello,
RB (Raw Beginner) here again. Now that I have a successful
movie in place, how do I create a 20 second delay before it plays
again? I know there is a better way than creating 400 still frames
at 20fps using F5 for every single layer!
Also, unrelated..How do I change my unpalatable ID from
"3888ffni879de777" to something more useful? I have looked all
through the PROFILE and PERSONAL OPTIONS, but no help.
Thank you!

Use this script:
=======================
stop();
var interval:Number = setInterval(function () {
play();
clearInterval(interval);
}, 20000);
=======================
The 20,000 is the time of the pause, 20,000 milliseconds = 20
seconds.

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

How do I insert additional clips into my video timeline in Elements 13? When clicking 'add media' it added the clips at end of video rather than in their appropriate position. Could not 'cut and paste'.

bhsleadership
I am in the process of preparing to test a sample from your brand and model camera in my Premiere Elements 8.0/8.0.1 on Windows 7 64 bit. I will have the results probably tomorrow morning.
For now I just want to put you through the drill that I do for anyone who says he/she is using Premiere Elements 8.0/8.0.1.
1. Are you working from the 8.0/8.0.1 Update of the program?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
2. Do you have the automatic Background Rendering and AutoAnalyzer features turned OFF.
For Background Rendering option. See Edit Menu/Preferences/General.
For AutoAnalyzer option. Click on Organizer in the row below the blue active Organize header in order to open the Elements Organizer. In the Elements Organizer workspace, go to Edit Menu/Preferences/AutoAnalyzer Options and disable all the AutoAnalzyer options. To return to the Premiere Elements workspace from the Elements Organizer workspace, in the Elements Organizer workspace, go to File Menu/Exit.
Is your computer optimized in spite of the fact that you have a high end laptop? I presumed so but always go to verify, no pile ups of preview files, conformed video and audio files et al.
Looking at the properties of your source media, I see:
video compression = MPEG1
audio compression = MPEG-Layer1 (.mp2)
Frame Size = 640 x 480 (4:3)
Pixel Aspect Ratio = 1.0
Frame Rate = 30 progressive frames per second
With properties like those you are sure to get a red line over that content since there is no project preset with that description.
But, your choice of the default NTSC DV Standard would have been mine also.
I am heading to try to get a quick look at the behavior of the sample video here in my Premiere Elements 8.0/8.0.1.
To be continued.
ATR

How to I add credits and slogans at end of movie

how to I add credits and slogans at end of movie? also an intro please

The title browser "T" under the imovie browser screen. Scrolling credits.

ITunes 12.0.1 crashes at end of movie download from iTunes Store

I have a Mid-2011, 21.5" iMac running Yosemite v10.10.1. I upgraded from 4 to 8 GB of RAM about a year ago, but I don't think that's an issue with this problem.
I can no longer download movie or tv show purchases from the iTunes Store to iTunes v12.0.1 on my iMac. The download starts and lists in the Downloads pane in iTunes. However, once the download has completed and the Download progress bar message changes to "Processing..." iTunes crashes. When I start iTunes back up again, the downloaded movie is not present in my iTunes Movie library. However, if I navigate to the iTunes\Movies\ folder, I can see a folder for the movie and a file instance of the movie (in m4v format) for every attempted download. Something seems to be going wrong with iTunes ability to add the link to the movie file into my iTunes library.
I tried adding the movie folder and file manually to iTunes using the iTunes->File->Add to Library... menu option, but iTunes instantly crashes the moment I click the "Open" button in the Add to Library... dialog window.
I have several movie purchases and gifts that I'd like to add to my local iTunes library, but this error is blocking me from doing that. (Poop!)
Some weird things about my iTunes library on my iMac:
My iMac does not have a large enough built-in harddrive (only 500 GB) to store my iTunes library. In a prior version of iTunes, I located the library on an external 3 TB USB-3.0 harddrive. I'm wondering if there's a bug in iTunes 12.0.1 that occurs when adding content to the iTunes library when that content is located on an external harddrive, i.e. in a folder other than \User\{my username}\Music\iTunes Media\. Perhaps I need to change the iTunes folder structure on the external harddrive to mirror the new folder structure in my \User\{my username}\Music\ folder. I'm a little leery about doing this as I do not want to break all the links in my iTunes library to existing songs, movies, etc.
Thank you,
Isaac

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

I would like to freely add clip art in Full Edit Mode in PSE 5.0

Hello,
I am new to Photoshop Elements. I have PSE 5.0 on a windows XP platform with service pack 3 installed. I want to be able to create flyers with PSE and would like to freely be able to add various types of clip art into my canvas. I know you can do this when you're creating slides, but I want to be able to do this in PSE full edit mode, not by creating a slide show via the organizer.
There are tons of clip art online and they have various file types too. I am also wondering if I can use any of the file types as well. The ones that PSE has for the slide shows are .png. But online I have seen .wmf, .mpf, .jpg as well. How can I incorporate all this clip art for use in creating flyers and/or logos by just starting with a blank 8.5 x 11 canvas in full edit mode?
Any expert help here would be greatly appreciated. I was able to do this using Word, but Word of course lacks the graphic quality and optionality of PSE greatly.
Sincerely,
Lee

Thanks for your reply here Bob. I have read what you mentioned above and am not quite sure how to do it that way. What I have been doing so far is to find a clip art item somewhere, copy it to the clipboard, then bring it into PSE with the File-New-from clipboard command.
This will bring it into it's own space and Layer as a separate file on it's own. Then I select it, copy the selection to the clipboard once again, move over to my blank canvas which only has one background layer now, and paste it onto this canvas.
This seems to be working, but I loose the Vector graphic aspect of the clip art image because it converts it to a raster type of image now. So I have to be very careful in resizing it to not loose resolution and such.
I noticed when I go to create a slide show in PSE, I have access to the graphics palette where you can double click a piece of clip art and it goes right onto your slide and stays as a vector image. I can get to these images while in full-edit mode, but I have to use the file-open command and navigate to the right folder and then open one up into full-edit mode as it's own layer. But then once again, I loose the vector aspect and I have to go through the process of selecting it, copying it to the clipboard and then pasting onto my blank canvas.
I know that MS Word is no match for this product, but at least there I could easily add clip art to any flyer I am making without loosing the vector aspect. But I know that the quality is so much better here in PSE and that I just need to learn how to utilize more of its functionality and power. Hence why I am writing this post I suppose.
Isn't there an easier way to get clip art into your blank canvas in full edit mode without having to go through all this and/or without having to create a slide show to get access to this clip art pallete? And having to loose the vector aspect of the clip art is not so wonderful either. Did I buy the wrong Adobe application - Ha!
Should I be using Illustrator since I want to create flyers using clip art, type and effects?
My apologies for this long post, but I would really like to be able to utilize, if at all possible, PSE 5.0's full power to create great quality flyers using all these things.
Thanks again,
Lee

Putting clips of a real movie into my own movie

I want to create an iMovie using pictures and videos of my own but I would also like to add some clips from a real movie. I have the movie on DVD and VHS. Is it possible to put clips of this real movie into my home movie?

Welcome to Apple Discussions Randy,
You can use any compatible movie file in iMovie. Here is a list of suggested file types for use with iMovie: http://support.apple.com/kb/TS3356
If the footage you want to use is only available on DVD and VHS (as opposed to a video camera) you have a few options.
Assuming these are your own homemade DVD, you could rip the DVDs (Do a google search for "DVD rip Mac" or buy a product like http://store.apple.com/us/product/TX414LL/A?mco=MTY3ODQ5OTY) into a movie file and then import that file to iMovie.
You could have a company convert your VHS tapes into movie files for you (there are many companies out there that do media conversion) or buy a convertor like http://store.apple.com/us/product/TS561LL/A?mco=MTY3ODQ5OTY and do it yourself.
Cheers

Please help with - program that continues to accept a movie name.. capacity

Hi
Could somebody help me to write program
Write a program that continues to accept a movie name (a max
of 30 characters), its ticketing capacity, and the number of the tickets sold
until the user indicates to stop. The program should display the column
headings given below, the movie name, ticketing capacity, number of tickets
sold, and number of seats available.
Sample Input and Output:
Enter a movie name: Blood Diamond
Enter its ticketing capacity: 500
Enter number of the tickets sold: 492
Additional data (Y/N)? Y
Enter a movie name: Shooter
Enter its ticketing capacity: 600
Enter number of the tickets sold: 600
Additional data (Y/N)? N
Movie/Capacity/Tickets Sold/Seats Available
Blood Diamond/500/492/8
Shooter/600/600/0
Thanks!

what do you have so far?He has 10 duke stars to generously award to the first kind soul to do it for him, obviously.
As an aside, this guy sure hasn't learned much (actually nothing) from the end of last October.
http://forum.java.sun.com/thread.jspa?threadID=781524
But he thinks he graduated from "New to Java" to "Java Programming", because now he's posting here.

Ending a movie in Premiere Elements 7

Premiere Elements 7:
How do I end my movie without the extra 10 minutes of blackspace that shows up everytime I render it?
My movie has video clips, slides, and transitions. I never put a formal ending on it, I just stopped dragging material into the sceneline. Once I render a 30 minute video, roughly 15 extra minutes of black space show up. How do I tell Premiere Elements 7 to end the movie?
Thanks,
Ben

I am stumped, as well, especially as PE doesn't allow one to "lock" a Track, or anything similar. It should be an easy process to select, and then delete the offending Clips. If the Lasso does not work, try Rt-clicking the Clip and choosing Clear (I think that is the proper syntax for deleting in PE and not storing the Clip in the Clipboard). If not Clear (the term in P-Pro, then look for Delete).
One observation that I have made, as to a possible cause for these tiny Clips, is that if one drags a Clip to abut to another Clip, with Snap On, and you drag too far (basically banging the moved Clip against the previous Clip), you can locate the moved Clip INTO the previous one, cutting of a frame, or two. These will then automatically go to the end of the Timeline, without any warning, or notification. Then, as you tighten things up on the Timeline they remain orphaned and can be quite a ways from the actual Clips, depending on how much editing one does. The trick is to drag the Clip (the one being moved) until you see the thick black line. It now butts up to the previous Clip. Let it go now and do not drag it into the previous Clip, or you'll get those orphans. Now, they *should* be easy to delete, if you remember to go looking for them. Always check the Time Code of your (intended) Clip with the Time Code for the Duration of your Timeline. They should match frame for frame. Otherwise, you've got an orphan problem.
Hunt

Having a loaded movie clip talk to another movie clip

Here's what I want to do:
Load a clip into my main movie - "loadedMovie"
at the end of the timeline in "loadedMovie" i want a
function, perhaps setColor, which will change the colour of another
movie clip which sits in the main movie.
Does this make sense? for a loaded movie clip to change the
color of an instance of another movie?
Many thanks,
Ray

ponch wrote:
> Here's what I want to do:
>
> Load a clip into my main movie - "loadedMovie"
>
> at the end of the timeline in "loadedMovie" i want a
function, perhaps
> setColor, which will change the colour of another movie
clip which sits in the
> main movie.
>
> Does this make sense? for a loaded movie clip to change
the color of an
> instance of another movie?
Sure make sense.
If the clip you like to target is on main timeline of the
movie than
you will use something like :
on (release) {
var my_color:Color = new Color(_root.SomeMC);
my_color.setRGB(0xFF00FF);
You can also refer to it by level:
(_level123.SomeMC);
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Why do i have do re render a clip when ever i move it?

Why do i have do re render a clip when ever i move it
is there any way to get around this?

http://discussions.apple.com/thread.jspa?messageID=13153996&#13153996
Quote: "by MartinR"
"A common cause of constant rendering is when your clip properties do not match your sequence settings. In FCE, your Easy Setup will determine the sequence settings when you create a new sequence.
So, the first questions are: what Easy Setup are you using in FCE? What are your sequence settings? What are your clip properties? Especially the codec/compression, frame size & frame rate. If you need help finding this info, let us know and we will explain."
Quote Ends:

Large still panorama in cs6 video clipped on ends

Windows 7 and PS CS6. I am trying to use the motion effect "PAN" in PS CS6 but the image is large. 7364 x 1080. It pans but clips the ends. The image in the timeline has a slider at the bottom, I take that to mean the image is to wide for the video frame. How can I use the pan effect in PS cs6 to pan a large panorama ?? I tried splitting the image but the seperate images are not a smooth single image.
initial image was 1.93 gigs as a 16 bit tiff, converted to jpeg 7364 x 1080.
Thanks

if you want to do a pan using the video of a pano, you should crop your image to the size you want your final video, but don't use the crop that deletes pixels - there's a check box in the menu bar for this. I don't have PS in front of my right now, so I'm going by memory. In the time line, make sure the play head is at the beginning of your movie. Then open up the boxes on the left. There should be a series of stopwatches. Click on the one that is for movement or transforming - I can't remember offhand what's it's called. Once you do that, move your playhead to the end of the timeline, then use the move tool to move your pano to the other end. A new key frame will appear marking the end of your "move." you should be able to play your movie after that and have it pan.

Premiere elements 11: clip the ends of an .mp4

In premiere elements 11, how do I clip the ends of an .mp4 and then save the result as a new .mp4 or other video?

hill0093
You really do not have to clip anything if you do not want to.
1. In the Expert workspace, place the gray tabs of the Work Area Bar to span the area of the Timeline that you want to export.
2. When you go to Publish+Share/Computer/ and your choice, your choice has to have an option "Share Work Area Bar Only" for
you to place a check mark next to.
You need to meet the above 2 requirements --- then, with export settings set appropriately, you hit the Save button. You will find
your file at the hard drive location that you designated in the Save In of the export dialog.
With regard to the gray tabs of the Work Area Bar - when you are in the Edit area....
Screenshot is from version 13, but same Work Area Bar/Gray Tabs concept in 11.
You can move the gray tabs in place with the mouse cursor or with shortcuts --
with shortcuts....
Move the Timeline Indicator to the beginning of the segment to be exported, then, as you hold down the
Alt key of the computer main keyboard, hit the left bracket key [
Move the Timeline Indicator to the end of the segment to be exported, then, as you hold down the Alt key
of the computer main keyboard, hit the right bracket key ]
Any questions or need clarification on any of the above, please ask.
Thank you.
ATR

[Solved] How to: Automatically add Semicolons at end of line

Q. Is it possible to set JDeveloper to automatically add Semicolons to the end of a line of code?
A. "While there is nothing that does this in batch mode to all your lines, while you are writing a line you can press the CTRL+SHIFT+Enter (complete statement in the source menu) shortcut and it will complete your line for you including the semicolon." [Solved] How to: Automatically add Semicolons at end of line
Original Message:
I'm spoiled from using Basic and similar programming languages, adding semicolons manually is something that'll take me time to get used to
Thanks in advance,
Abdulla
Tags (for search engines):
Jdeveloper automatic semicolon
Message was edited by:
Abdulla

While there is nothing that does this in batch mode to all your lines, while you are writing a line you can press the CTRL+SHIFT+Enter (complete statement in the source menu) shortcut and it will complete your line for you including the semicolon.

Program adds clips to end of movie

Similar Messages

Maybe you are looking for