Program and includes shows as local when activating

Hi. I have changed a program and 3 includes that the program uses all from local ($tmp) to a Z package.
All 4 objects are correctly in my transport, and they work fine.
However, when I activate the 4 objects, 1 of the includes is on the "transportable objects" side of the pop up box, but the main program and the other 2 includes show on the "local objects" side still.
If I display "local objects" from SE80 for my user ID nothing is shown, the objects are definitly not local.
Why does only 1 include show on the transportable side?
Any help would be appreciated.
Regards,
Dave.

Hi. I had already checked the versions, everything showed as transportable and in a transport.
I went to SE03 and compared the main program with the include that did show correctly and they were the same.
However, when viewing the directory entry I did not change anything, but when I pressed the green tick it did say "directory entry changed" at the bottom.
I went back to SE80 and activated and everything showed as transportable now, even the include that I did not display in SE03, so everything is OK now.
Thanks a lot.
Dave.

Similar Messages

  • I have been unable to download adobe acrobat pro, which I purchased on a month to month basis almost exactly 1 year ago, since I purchased it. I just received a renewal email and it had a link to download the program and for the first time when I clicked

    I have been unable to download adobe acrobat pro, which I purchased on a month to month basis almost exactly 1 year ago, since I purchased it. I just received a renewal email and it had a link to download the program and for the first time when I clicked on the link it actually sent me to a page that had the icon to download now. I clicked on that, but when I went to open the file and start downloading after about 3 minutes into downloading it says an error had occurred. Can anyone help me?

    I am a little worried. If you are an existing subscriber why would Adobe need you to download... I wonder if the message is a fake.
    I'm not clear, if you've had it for a year, whether you need to download, or you are just following the email?
    This page with the icon to download now. Was it a page on adobe.com ?

  • I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.

    I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.

    what's creative cloud 6?  do you mean cs6?
    what version of acrobat pro do you have installed and what are you clicking to start it?

  • 5.0 shows installed on ff help. Programs and features shows only 3.6.8. When I try to download 5.0 computer says it must restart to finish installation of another ff. Restart has no effect. Looks like I am stuck on 3.6.8. Please help.

    This computer will not update to 5.0. I have tried to download and install 5.0 for many weeks. My OTHER computer updated fine. When I try to install 5.0 it say to restart to finish installation of another firefox. Restart does not change anything.
    I click on ff help, about ff and it says 5.0 is installed. I look on programs and features and only ff 3.6.8 is listed. I have tried clean ups, update java, plugins and stuff like that with no change to this issue.

    I guess no one cares.

  • Error Showing in Podcast RSS and iTunes shows a "!" when it loads

    I have created eight episodes so far for our podcast series. All podcast episodes were created in Garageband and uploaded to iWeb. In iWeb I published the webpages to our podcas server. The pages show beautifully and the podcasts work well.
    BUT if someone tries to subscribe to the podcasts, an error appears. I went into the server and found "podcast.html" and had to correct the URL. When I publish to the folder on the server, iWeb creates a folder as the name of the podcast and then places all the documents into that folder. The problem lies in that the xhtml and the rss will not work if that folder is in the URL. If I manually remove the folder, it works quite well. IF I create a new episode and upload it to iWeb, when iWeb publishes to the folder on the server, it overrides the manually corrected URL and places the folder back in the URL. It took me 15 minutes to correct the document (podcast.html) the last time I added an episode.
    Therefore, one cannot subscribe to the podcasts via the website nor via iTunes.
    The webiste is http://podcast.sparcc.org/Welcome.html
    When a new episode is created it the URL looks like this: http://podcast.sparcc.org/The_Sanctuary/Welcome.html
    There are three others working with me on this project and we are getting very frustrated.
    Don
    Power Mac G4   Mac OS X (10.4.7)   Dual 450 Mhz

    Hi murr18140,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363?viewlocale=en_US
    I hope this information helps ....
    - Judy

  • DVR programming and recorded shows are gone

    A couple of days ago, the area had some power flickers, my power outage was total about 2 minutes. However, I went to check my DVR to watch the previously recorded shows, they are gone! Also my programming schedules are gone too. Is there a way to retrieve them? Or are they gone forever. Need to reprogram the recording schedules?

    There is no official way to get at any media purchased on the AppleTv other than by syncing back to a registered iTunes library. Your problem is two-fold, firstly AppleTV is not recognising the media anymore, and secondly it's not set up to sync with anything.
    If you try to set up a sync library now it will just erase any content on there anyway as it thinks you want a clean slate to sync with a new library.
    If you do a system restore it will also wipe everything.
    Your options are:
    1 - contact iTunes store and explain it's lost a load of purchases - they may allow you to redownload, they may not
    2 - open AppleTV up and extract the hard drive, stick it in a USB caddy and hook it up to a Mac (Windows would need additional software) and browse the partitions and see if you can find any useful media - you may not if it's been marked deleted .
    3 - 'Modify' AppleTV software to enable command line access to the device so you can browse it via a terminal application - this is effectively hacking it so can't be discussed further. In any case it might not help if stuff has been deleted.
    Realistically your best bet is to put the ball in Apple's court and ask them how they're going to help you retrieve your media which has been lost through no fault of your own.
    I keep saying it but I don't think AppleTV based purchases have been adequately thought out - there really should be a way to back up files manually either by attaching a USB storage device directly to it or some kind of 2 way drag and drop iTunes interface or separate utility to allow you to manually move media if things play up.
    Without a method to back up when there's no regularly used computer, AppleTV cannot realistically be regarded as a sensible standalone media device for anything other than rentals. This could prove costly if you've lost all your purchases and I suspect will lose Apple money too if your confidence in the system has gone.

  • Time and date showing wrong time when set on auto since 4.1 update

    hi since i updated my 3gs to 4.1 my time and date have changed by about 1 and a half hours and afew days before. i can change it manually but i dont understand why this has happened. has this happened to anyone else?
    can anyone help? or am i just best to wait till the next update?

    Me too.
    Second time I've been late to work in two weeks thanks to Apple ** programming!
    First time when I upgraded to 4.1 and the alarms stopped working if they were set to go off every working day.
    Then again today when the time unaccountably rolled back to be Sunday the 7th at 5am instead of WEdnesday 10th at 9am. Waiting for the day I'm out of contract on this rubbish so I can switch to a phone with a decent OS!
    Message was edited by: twixPanther

  • Aperture opens and always shows processing in the activity window

    Aperture 3 opens and every time shows activity of approx 800 photos being updated in the Library

    800 Images shouldn't take much more than an hour.  At the same time, you should _never_ force quit a database.  After any force-quit, you should at the least repair, and consider rebuilding, your database.  See this Apple page for instructions.
    Is there anything unusual about those 800 Images?
    I suggest repairing your Library, then letting Aperture run unmolested overnight, then reboot and see if the Activity Window reports any processing.  Post back.

  • SPA 30x and 50x - show miss state when call was pickup

    Hello
    do you know, how to show on display miss state (softkey miss) when call was pickup in pickup group.
    My IP phone is SPA 303 and 502, and 922 but SPA 922 is showing miss state well.
    Server is Asteriks.
    Marek

    Call completed elsewhere has not been missed, so SPA922 is on the wrong side ...
    If the line is declared as shared AND call is CANCELed with
    Reason: SIP;cause=200;text="Call completed elsewhere"
    then no missed call is logged.
    I'm not sure if you can configure Asterisk not to use this Reason in such particular case. If I remember correctly, there is and option of Dial() Application for it ...
    Of course, unless you have User->Supplementary Services->Log Missed Calls for extension in question set to "Yes" no missed calls are logged at all.
    Rate useful advices and/or mark answer as "correct". It will help others to found solutions.

  • Gmail won't send messages, and Mail shows sent messages when I don't want

    I have my Gmail account set up through the Mail application. I can receive messages fine but I can't send them. So I send them by actually logging into Gmail. Now when I send them that way, they show up in my Mail account but i don't want them to. Help please!

    I am having the same problem. I have tried Mulder's solution without success.
    Here is some background:
    I have two gmail accounts. My normal "[email protected]" account with which I am using POP does send mail. However I also have a google apps account ("username@my_domain.com") connected with IMAP and I can't send using this one. I have tried the various ports suggested by gmail help. It won't connect with the outgoing server. I ran a Telnet test and my computer is connecting with the server, but it appears as "offline" in Mail. User authentification and SSL are both checked (although I have also tried unchecking them).

  • Almost everytime I click on a website it redirects me somewhere else. I deleted all my files from my computer and have not reloaded them. I ran an antivirus program and it shows nothing. How do I get rid of this redirect???

    I don't know what other details I can give you. I get redirected when I want to go to most websites. How do I get rid of it?

    Do a malware check with some malware scan programs. You need to scan with all programs because each program detects different malware. Make sure that you update each program to get the latest version of the database before doing a scan.
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and Searches are redirected to another site

  • My Firefox keeps glitching out on youtube and wont show youtube videos when i go to uploads on other peoples channels what do i do?

    Videos will not appear on youtube pages when i click the upload tab but when i go on chrome they do!

    Hi,
    There's two things you could do to help us figure out what's going on.
    #Provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]] Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
    # *Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux) and see if that helps

  • I backed up verizon cloud and still showing update pending,,,when will my pictures be in verizon cloud

    after backing up Verizon cloud my pictures are still showing "update pending" Why and what do I need to do?

        Hi Christine!  Thanks for the additional information, I do appreciate it!  Your last backup was on January 11, 2015, and no issues I assume with this backup correct? My recommendation would be to first completely power off (till you see the "slide to power off") the phone to reset it.  Then try the backup process again. 
    If that is not succesful, I would reset the application by deleting the application (press and hold till it shakes & press on the X in the corner) and then re-install it back to the phone. A quick question as well, I see you have the iPhone, are you also using the iCloud to backup your information? You can also go to Settings < iCloud < Backup < make sure iCloud backup is on/green < Backup Now.  You'll need to be connected to Wi-Fi to backup properly. 
    Please let me know if that helps!  Thanks again!
    -KristieQ_VZW
    Follow us on Twitter @VZW Support

  • Error when activating my iPhone Developer Program membership

    Ive just paid 99 dollars for my iphone developer program, and recieved an email containing the activation code. As you probably know, youre supposed to click on this activation-code and it links you to another site. But instead of activation I recieve this error-message on this site:
    "We are unable to activate your iPhone Developer Program membership because we are unable to successfully verify your identity. Please contact us and reference Enrollment ID# XXXXXXXXXX for further assistance."
    There was no problem verifying my identity when I paid for it. How come thats an issue now?
    Since people seem to have to wait for enormous periods of time to get even the simplest questions answered by Apple regarding the Dev Program, I thought I post this here to see if someone else have come across this, and what to do about it (except for waiting indefinitely).

    Mine got activated after a few days with no need for further information from me so if you get that same message you probably don't need to worry.

  • Laptop shows "access: local only" when connected to this hotspot

    I have the Verizon Jetpack 4G LTE Mobile Hotspot MHS291L set up in my home environment.  I have a number of computers that are able to connect to it and use the internet.  There is one laptop that I have (Lenovo SL500) which is Vista SP2, that has trouble connecting to the Jetpack.  I went into the Connected Devices settings for the Jetpack and noticed that this particular laptop was in the Blocked Devices section.  I Unblocked the laptop and it then appeared in the Connected Devices section.  Not sure how it got into the Blocked Devices section in the first place.  Anyways, upon trying to connect to the wireless network, I looked at the wireless network connection and it shows "Access:  Local only" instead of "Acess: Local and Internet."  It seems like the laptop connects to wireless, but I cannot browse the internet in any browser.  Also, I have tried this laptop at someone else's house that has a standard wireless router (no hotspot) and the laptop connects fine and is able to browse the internet.

    The network status indicator on Windows products cannot always be trusted.  Windows uses its own algorithm to determine its connectivity by checking a few resources on the web.  In a nutshell if Windows can make it to the resources then it declares itself internet connected or otherwise.  What you should do is your own troubleshooting to determine what is truly going on.
    First step is to check your IP Address.  Windows will display a 169.254.xxx.xxx IP if it is not completely connected to the current router/jetpack.  If that is the case then your laptop has not been accepted onto the router and you should check your connection credentials or recreate your connection profile.
    The next step if you have a normal and good IP address is to manually check the internet by browsing to a website.  Even though your computer cannot communicate the way it wants to that doesn't always mean that all internet communication is having a problem.  You should always try a simple browse to Google or another popular search engine or website when experiencing problems to confirm the scope of the situation.
    Pending on how these first two simple checks go you should proceed one way or another.  Chances are there is a wireless profile conflict on your Vista machine for your Jetpack. The best course of action would be to wipe the wireless profile and start over from scratch.  I'd start here and work my way outwards.

Maybe you are looking for