Program CL_RSD_MULTIPROV_CHECK========CP and form CHECK-03

Hi,
We have recently updated to SP 18 from SP 15.
We are facing a compounding Problem with Multiprovider and when we check we are getting the error:
program CL_RSD_MULTIPROV_CHECK========CP and form CHECK-03
We are not able to execute any query on this Multiprovider.
We implemented the note: 1252207 as mentioned in the Service market place. But still there is not resolved.
Please suggest any other possibilities to resolve it.
Thanks.
Joseph M

hello,
from wht you have written i understand the error now:
Since you have already assigned 0CALDAY in MP to 0CALDAY of CO-PA cube.
Now ,when you are trying to assign another IO also(0ACT_GI_DTE) to the same 0CALDAY, it is giving error.
Try:
when you see 0CALDAY in the time dim. on the left hand side,on the right side you should have both 0ACT_GI_DTE and 0CALDAY for you to select.Check them both there.
<removed by moderator>
Reagrds,
Dhanya.
Edited by: Siegfried Szameitat on Nov 17, 2008 11:27 AM

Similar Messages

  • "abort system error in program CL RSR and form GET_PROVID-02-(see long text

    Hi All,
    When i try to excuting bex query in analyser and whaen i have to exucuting cube contents, i got this error message :
    "abort system error in program CL RSR and form GET_PROVID-02-(see long text)"
    System error in program CL_RSR and form GET_PROVID-02- (see long text)
    Message no. BRAIN299
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
    Can anyone help me?
    kumar.

    Hi , could you please check note 1166294 and check if the issue will be fixed ?
    1166294-BRAIN 299 in CL_RSR, form GET_CHANMID-02-
    Thanks,
    Walter Oliveira.

  • French translation program with grammar and spell check?

    Does anyone know of any really good translation programs where you can write a document in english and the program will translate it to french? The program would also need to have spell and grammar checks.  Thanks

    I know that there's one on the dashboard. You can use google translate but you can't download that one.

  • System error in program CL_RSD_MULTIPROV_CHECK========CP

    Hi all,
    I work with BI 7 release, SAPKW70019 patch. I see the following message when I activate a multiprovider:
    System error in program CL_RSD_MULTIPROV_CHECK========CP and form CHECK-03- (see long text)
    Message no. BRAIN299
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
    I cannot find a reason why this message arises. The only thing I notice is that one of the two infocubes that compose the multiprovider contains 20 key figures and one of them have the aggregation on '0CALDAY' reference characteristic (and 0CALDAY is not available). Both infocubes are activated without problem.
    Any ideas?
    Thanks a lot for the support!
    Gianluca

    Hi,
    Termination CHECK-03- issued instead of a warning
    Try this SAP Note Number: 1252207

  • No printing :I can't print anymore, printing the same file with another programs is ok, printing form LR: Preparing  and Printing indicatorbar in the left hand upper corner are running, but no output at all rom my printer. I have been printing before. I u

    No printing :I can't print anymore, printing the same file with another program is ok, printing form LR (in the same system and printer of course :-) ): Preparing  and Printing indicatorbar in the left hand upper corner are running and completing, but no output at all to my printer. I have been printing before. Next I upgraded to LR5.7.1 but the problem stays. Perhaps some adjustment is changed by me unintentionally, but I have no idea. Does anybody know what to check? Printing to file is also strange,the canvas only seems to accept A4, and crops any image relative to that size, so a 10x15 cm print on 10 x 15 cm paper is cropped to 10x15/2. Anybody any idea? (system win 8.1 64, printer HP B8550)

    I accidentally solved my mystery.  For some reason it was set to "print to file".  I changed it to "printer" and now I am able to print.

  • System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01

    Hi All,
    I'm configuring the integration between BW 7 SP 11 and Portal 7 SP11. I have problems in the IP functions.
    The following error ocurrs in QueryDesigner when trying to execute a Query that is on an <b>Agregation Level</b> :
    <i>The initial exception that caused the request to fail, was:
    Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
    ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
    ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    ABEND: System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01- (see long text)</i>
    When I execute Querys that are on Infoproviders, everything is ok.
    Any Idea??
    Thnks a lot!!!
    Yolanda.

    Hi,
    Are you getting an ST22 dump in the backend, we used to get this kind of error in case of hierarchies, please check 2 things
    1. Agg level is active
    2. Check the query (option is available on query designer)
    thanks

  • System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02

    Hello experts,
    I get the following error when I execute the input ready query which was created on the aggregation level in BI IP.
    The system information is SAP BI Add on 7.X(based on 7.10) SP 2,Patch 1, Revision 490.
    Thanks
    Terminate: System error in program SAPLRRI2 and form INPUTABLE_CHAFREE-02- (see long text) [A299(BRAIN)]
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
    For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.

    You may wish to check this
    Note 1048923 - BRAIN X299 in SAPLRRI2; form INPUTABLE_CHAFREE-02-
    Hopeit Helps
    Chetan
    @CP..

  • System error in program SAPLRRI2 and form FEMS_IN_FORMULA_GET-01 Message

    Hi Gurus,
    I am getting error 'system error in program SAPLRRI2 and form FEMS_IN_FORMULA_GET-01' while checking and executing a query.
    The scenario is :
    - The query is using Replacement path formula variables and when I do remove these the error disappears.
    - I recreated the same formula variable but the error message reappears.
    - We are separating systems (moving on to new system) and the query runs absolutely fine in the old system.
    - The same variable is been used in some other queries as well but they run absolutely fine without any error.
    Any suggestions what is going wrong ? Should I raise an OSS to SAP, thats going to be the final GO !!
    I have tried almost doing all things but the error remains the same. This is quiet urgent and Reply will be much appreciated.
    Best Regards
    Ritesh

    Hi,
    Thanks for the reply. OSS note 982328 becomes irrelevant in my case as we are on SAP BW 7.3 and SP SAPKW73003. So this is the most recent and latest version of SAP.
    One more update is I tried regenerating the query in RSRT/RSRT1 but it starts in debug mode. This is of more worry to me now. Any suggestions or solutions are welcome, meanwhile I will raise this to SAP.
    Best Regards
    Ritesh Singh

  • System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-10-

    Hi Experts,
    We found an error ABAP/P Processor: Message_type_x and Error analysis shows "System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-10-"
    I found a forum that close to my issue: ABAP Dump Error - System error in program RSMDATASTATE
    Also, I checked the SAP Note : 858671 and 1094948.
    As for my BW system, the system component information is SAP Netweaver BI 7.0 Release 700 Level 0019. Does it mean the both sapnotes alreay apply to my sap system?
    Could anyone please advices me in this issue? I am so newbie in SAP BW. I'm so apology if they already have a forum or a note that related to my issue.
    Thank you everyone for further assistances
    With Best Regards,
    Molly

    Hi Molly ,
    A per my experience and and observation. Message_type_x issue will occur in two scenarios.
    1) When ever Sytesm copy happend.
    2) Triggering of info package twice at a same time.
    Case1:
    When ever system copy happens, we will have init request still pointing to the Previous targer syatem's in Init.
    Thsi can be resolved by reinitilization of source request.
    Note: Make sure that Init reqiuest is same in both Source and Target systems.
    Case 2:
    Message_type_x  May occur by triggering the info package at a same time twice(some time we also get xx request is inprocess alert).
    With respect to the following blog:
    Kindly check the request in RSMDATASTATE.
    1) Request SID for which all requests are technically o.k.
    2) Request SID for which all requests checked for quality.
    3) Request SID, up to which aggregates are to be rolled up.
    Best Regards,
    Maruthi

  • System error in program SAPLRRS2 and form SELOPT_ASSIGN-01- (SAP BW 3.5)

    Hi,
    The following error occured when executed a query :
    "System error in program SAPLRRS2 and form SELOPT_ASSIGN-01-"
    I have read OSS note 907533 but from what I see in this note, I conclude the repair instruction
    only for SAP BI 7.0 so this note not for SAP BW 3.5.
    I have use button "Check query" and everthing is fine.
    Is there someone who can solve my problem?Thank you
    Regards,
    Satria

    This question is interesting. 
    One of my users got the same message today.  Wednesday, she ran some queries that had 3 variables on them.  She had no problems.  Yesterday, she tried to run the same queries, and one of the three variables did not show up on the variable screen.  The characteristic in question is not authorization relevent.  Others had no problems with these queries. 
    Today, I created a new query using the characteristic with no variables.  It ran fine for her.  I added the variable and she got the error message.
    So, I would really appreciate an answer to this thread!
    Ginny

  • Executing query error: System error in program SAPLRRI2 and form REP_A

    Hello Experts,
    I am facing problem while executing query.
    I have activated a query from BI content. The query is activated successfully in development and running successfully in development, so I transported the same into QA.
    When I execute this query into quality, automatically debuger opens. After I come out of debuger I get following error message:
    " >> Row: 82 Inc: LRRMSU13 Prog: SAPLRRMS
    System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text)
    Error when generating dataProvider "
    This query is using some standard structures, which are running successfully in other queries in QA.
    what would be an issue?
    Regards,
    Nirav Shah

    Hi,
      Try to regenerate the query in RSRT t.code.
       ie) RSRT - give the query name - Generate report ( icon will be there near to Execute + debug) .
    After generating the report, (logoff and login )try to execute the query again ..if the above solution doesn't work, check the below OSS notes which may help for you.
    OSS notes : 1. 1121766
                       2. 1117966
                       3. 1225856
    Regards,
    Siva.

  • System error in program CL_RSR_RRK0_PARTITION and form NOTIFY_READ_REQUEST-

    Hi,
    I am getting following error while running BI -Query
    "System error in program CL_RSR_RRK0_PARTITION and form NOTIFY_READ_REQUEST-01- (see long text)"
    I generated query in RSRT yesterday and it fixed the problem. But , today morning again i am seeing the same error.
    Thanks in advance,

    you may wish to check this note
    Note 1049671 - CL_RSR_RRK0_PARTITION and IF_RSR_RRK0_PARTITION~BROWSE-01-
    use tcode - SNOTE to download this note for implementation and if do not work can revert it back to original.
    Hope it Helps
    Chetan
    @CP..

  • System error in program SAPLRRI2 and form LRECH1_VARIABLE-02- 0

    Hi Experts,
    I have created a query on ODS when i am  executing the Query it is giveing the following System error.
    <b>System error in program SAPLRRI2 and form LRECH1_VARIABLE-02- 0</b>
    Pl.let me know how to resolve it.
    Thanks in Advance
    Sirisha

    Hi,
    Check all variables, you use in your query, together with variables used in restricted KF and text variables. It seems, that you use in one of your variables values from the other one which is missing in your query, and system cannot find the source.
    Hope it helps,
    DL

  • Assigning customised purchase order driver program and form ?

    Hi ,
    I have a created my own driver program  and form form for purchase order.........after developing where should i assign it..
    i tried in nace but im getting the following error :
    Processing routine ENTRY_NEU in program ZSK_PO does not exist.
    wats the error i have made ?
    thanks,
    Siva.

    Hi
    You have to attach in the NACE itself. Check IF your program is activated and did you use:
    Form ENTRY_NEU.
    "all your code should be here.
    ENdform.
    IN your program??
    Regards,
    VIshwa.
    Edited by: Vishwa Sri Hari on Oct 22, 2008 4:18 PM

  • Error in Program SAPLRRKO and form RSRDR; SRRK0F30-01

    Hi I'm hoping someone here can help me as I'm not getting far with OSS.
    I'm running a query across an Infoset that combines 3 ODS together. However I'm getting the following error
    Error Value "(hex.)" of characteristic contains invalid characters
    Abort System error in Program SAPLRRK0 and form RSRDR; SRRK0F30-01
    and the query terminates.
    I've checked the infoset in RSISET and it's ok and I've regenerated the query in RSRT with no joy.
    I am filtering on a date field that does have # not assigned entries in it.  Is this causing the problem?
    I'm on BW 3.5   Patch level 16 and using BEx 3.5 patched to level 11.
    Any advice would be appreciated greatly

    Hi,
    We are also facing same error , can you please let me know how did you solve this problem.
    any help will be appreciated.
    Thanks in advance
    Manju

Maybe you are looking for