Program compiles but doesn't work

The folowing program compiles, but it doesn't work, when I type GuessingGame.play(5); into the interactions pane, I get the message
No 'play' method in 'GuessingGame'. All my brackets line up and I can't see where the problem is. I would definitely apreciate it if you could help!
/** Allows a user to play a number-guessing game.
The constructor takes the integer to be guessed. */
public class GuessingGame {
int theNumber; //The number to be guessed by the user.
int guessNumber; //The users guess.
public void play(int g){
theNumber=g;
guessNumber = Integer.parseInt(JOptionPane.showInputDialog("Guess an integer."));
while(guessNumber!=theNumber){
if(guessNumber > theNumber){
JOptionPane.showMessageDialog(null, "Your guess was too high. Guess again.");
else if(guessNumber < theNumber){
JOptionPane.showMessageDialog(null, "Your guess was too low. Guess again.");
JOptionPane.showMessageDialog(null, "You're right!");

Sorry, it's just that no-one was answering, it took over 2 hours to get a response. I finally got some help now(with the topic as 'Fun to be had by all!'), so you can now just ignore all of them.

Similar Messages

Applet compiles but doesn't work as intended

My program intends to add, subtract, multiply or divide two numbers, whereby, if the user enters 'A' the program adds the two numbers, and 'S' to subtract them etc. The program compiles fine but as I am pretty new to Java I'm finding it hard to find my error. Reagrds in advance.
import java.applet.Applet;
import java.awt.*;
import java.awt.event.*;
import java.lang.*;
public class CharacterCalculation extends Applet implements ActionListener
     Label input1, input2, input3, output;
     TextField ip1, ip2, ip3, op;
     Double num1, number1, num2, number2, calculationa, calculations, calculationm, calculationd;
     String characterentered;
     public void init()
          setSize(280,180);
          input1 = new Label ("Enter first number here:");
          ip1 = new TextField(5);
          add(input1);
          add(ip1);
          ip1.addActionListener(this);
          number1=0.0;
          input2 = new Label ("Enter mathematical operator here:");
          ip2 = new TextField(5);
          add(input2);
          add(ip2);
          input3 = new Label ("Enter second number here:");
          ip3 = new TextField(5);
          add(input3);
          add(ip3);
          ip3.addActionListener(this);
          number2=0.0;
          output = new Label("The answer is:");
          op = new TextField(32);
          add(output);
          add(op);
          op.setEditable(false);
     public void paint (Graphics graf)
          graf.drawString("A = Add S = Subtract D = Divide M = Multiply",20,160);
     public void actionPerformed(ActionEvent ev)
          num1=Double.parseDouble(ip1.getText());
          num2=Double.parseDouble(ip3.getText());
          characterentered=(ip2.getText());
          calculationa=(num1+num2);
          calculations=(num1-num2);
          calculationm=(num1*num2);
          calculationd=(num1/num2);
          if (characterentered == "A")
               op.setText(Double.toString(calculationa));
          if (characterentered == "S")
               op.setText(Double.toString(calculations));
          if (characterentered == "M")
               op.setText(Double.toString(calculationm));
          if (characterentered == "D")
               op.setText(Double.toString(calculationd));
          else
               op.setText("Please enter a valid mathematical operator");
}

if (characterentered == "A")This is never going to work. A String is an object. What the above line does is compare the reference of characterentered to the reference of the object "A", which will never be the same (they are two different objects stored in two different memory locations).
If you want to compare two strings you need to use the equals() method, so change to four comparison lines to:
if(characterentered.equals("A")){
}

Old C socket program compiles, but doesn't run properly

I have an old C program that uses sys/ipc.h to listen on ports 6666 and ports 6669 for user requests. I have determined that the
program gets to the 'accept' call without error. The return from accept(sockfd, (struct sockaddr *) &cli_addr, &cli_addrlen) is zero
indicating success. Nevertheless, something is wrong, because netstat -a shows nothing listening on either 6666 or 6669, and
telnet to these two ports fails as well.
I've compiled and run the program on Sparc 8 and 9. It is the i86pc architecture I am having a problem with. I tried having root
run it in the global zone in order to eliminate zones as a factor with no success.
This program also uses threads (thread.h) and rpc (rpc.h). Has anyone seen this problem? Does anyone have a suggestion?
George

Hi Darren:
Thanks for your prompt supply. I saw no alternative but to start pulling the code apart and I believe I have a solution. I think big-endian as opposed to
little-endian definitely has something to do with it.
Here's what I had to change to make this work:
Original Code: serv_addr.sin_port = htonl(port);
Modified Code: serv_addr.sin_port = htons((short) port);
Converting the port to a short seems to have fixed things. The original code converted the port to a long.

PLSQL compiles but doesn't run.. I've declared it everywhere but still..

PLSQL compiles but doesn’t run.. I’ve declared it everywhere but still..
Afternoon.. Hopefully a quick one for someone.. I’m trying to run a Concurrent Program in ORACLE Financials using a Data Template derived BI Publisher report.
Error message received..
SUBIXCLT module: UofS Expense Claim Tracking Report
+--------------------------------------------------------------------------
All Parameters: raisedby=:status=:claimant=:expense_date_from=:expense_date_to=:LP_ORDERED_BY=Expense Report Number
Data Template Code: SUBIXCLT
Data Template Application Short Name: PO
Debug Flag: N
{raisedby=, claimant=, expense_date_to=, expense_date_from=, status=, LP_ORDERED_BY=Expense Report Number}
Calling XDO Data Engine...
[060410_025628319][][STATEMENT] Start process Data
[060410_025628324][][STATEMENT] Process Data ...
[060410_025628329][][STATEMENT] Executing data triggers...
[060410_025628329][][STATEMENT] BEGIN
SUBIXCLT.claimant := :claimant ;
SUBIXCLT.expense_date_from := :expense_date_from ;
SUBIXCLT.expense_date_to := :expense_date_to ;
SUBIXCLT.raisedby := :raisedby ;
SUBIXCLT.status := :status ;
SUBIXCLT.lp_ordered_by := :lp_ordered_by ;
:XDO_OUT_PARAMETER := 1;
END;
l_flag Boolean;
BEGIN
l_flag := SUBIXCLT.BEFOREREPORT(L_ORDERED) ;
if (l_flag) then
:XDO_OUT_PARAMETER := 1;
end if;
end;
[060410_025628356][][EXCEPTION] SQLException encounter while executing data trigger....
java.sql.SQLException: ORA-06550: line 4, column 33:
PLS-00201: identifier 'L_ORDERED' must be declared
ORA-06550: line 4, column 1:
PL/SQL: Statement ignoredThe Data Template
The Data Template
<?xml version="1.0" encoding="utf-8" ?>
- <dataTemplate name="UofS_OutstandngExpenses_Report" defaultPackage="SUBIXCLT" dataSourceRef="FINDEV" version="1.0">
- <properties>
<property name="xml_tag_case" value="upper" />
<property name="include_parameters" value="true" />
<property name="debug_mode" value="on" />
</properties>
- <parameters>
<parameter name="claimant" dataType="character" defaultValue="" />
<parameter name="expense_date_from" dataType="date" defaultValue="" />
<parameter name="expense_date_to" dataType="date" defaultValue="" />
<parameter name="raisedby" dataType="character" defaultValue="" />
<parameter name="status" dataType="character" defaultValue="" />
<parameter name="lp_ordered_by" dataType="character" defaultValue="" />
</parameters>
- <dataQuery>
<dataTrigger name="beforeReportTrigger" source="SUBIXCLT.BEFOREREPORT(L_ORDERED)" />
- <sqlStatement name="Q1">
- <![CDATA[
SELECT DISTINCT
erh.invoice_num,
pap.full_name EMP_CLAIMING,
DECODE(NVL(erh.expense_status_code, 'Not yet Submitted (NULL)'), 'CANCELLED', 'CANCELLED',
 'EMPAPPR', 'Pending Individuals Approval', 'ERROR', 'Pending System Administrator Action',
 'HOLD_PENDING_RECEIPTS ', 'Hold Pending Receipts', 'INPROGRESS', 'In Progress', 'INVOICED', 'Ready for Payment',
 'MGRAPPR', 'Pending Payables Approval', 'MGRPAYAPPR', 'Ready for Invoicing', 'PAID', 'Paid',
 'PARPAID', 'Partially Paid', 'PAYAPPR', 'Payables Approved', 'PENDMGR', 'Pending Manager Approval',
 'PEND_HOLDS_CLEARANCE', 'Pending Payment Verification', 'REJECTED', 'Rejected', 'RESOLUTN', 'Pending Your Resolution',
 'RETURNED', 'Returned', 'SAVED', 'Saved', 'SUBMITTED', 'Submitted', 'UNUSED', 'UNUSED',
 'WITHDRAWN','Withdrawn', 'Not yet Submitted (NULL)') "EXPENSE_STATUS" ,
NVL(TO_CHAR(erh.report_submitted_date,'dd-MON-yyyy'),'NULL') SUBMIT_DATE,
NVL(TO_CHAR(erh.expense_last_status_date,'dd-MON-yyyy'),'NULL') LAST_UPDATE,
erh.override_approver_name ER_Approver,
fu.description EXP_ADMIN,
erh.total,
erh.description
FROM
AP_EXPENSE_REPORT_HEADERS_all erh,
per_all_people_f pap, fnd_user fu
WHERE erh.employee_id = pap.person_id
AND fu.user_id = erh.created_by
AND NVL(erh.expense_status_code, 'Not yet Submitted') NOT IN ('MGRAPPR', 'INVOICED', 'PAID', 'PARPAID')
AND pap.full_name = NVL(:claimant, pap.full_name)
AND TRUNC(erh.report_submitted_date) BETWEEN NVL(:expense_date_from, '01-JAN-1999') AND NVL(:expense_date_to,'31-DEC-2299')
AND fu.description = NVL(:raisedby,fu.description)
AND erh.expense_status_code = NVL(:status,erh.expense_status_code) &LP_ORDERED_BY
]]>
</sqlStatement>
</dataQuery>
<dataTrigger name="beforeReportTrigger" source="SUBIXCLT.BEFOREREPORT(L_ORDERED)" />
- <dataStructure>
- <group name="G_XP_CLM_TRACKNG" source="Q1">
<element name="INVOICE_NUM" value="INVOICE_NUM" />
<element name="EMP_CLAIMING" value="EMP_CLAIMING" />
<element name="EXPENSE_STATUS" value="EXPENSE_STATUS" />
<element name="SUBMIT_DATE" value="SUBMIT_DATE" />
<element name="LAST_UPDATE" value="LAST_UPDATE" />
<element name="LP_ORDERED_BY" dataType="varchar2" value="SUBIXCLT.LP_ORDERED_BY" />
</group>
</dataStructure>
</dataTemplate>The PL SQL..
The PL SQL..
CREATE OR REPLACE PACKAGE Subixclt IS
L_ORDERED VARCHAR2(50);
RAISEDBY VARCHAR2(50);
STATUS VARCHAR2(50);
CLAIMANT VARCHAR2(50);
LP_ORDERED_BY VARCHAR2(50);
FUNCTION BEFOREREPORT(L_ORDERED IN VARCHAR2) RETURN VARCHAR2;
EXPENSE_DATE_FROM DATE;
EXPENSE_DATE_TO DATE;
--RETURN VARCHAR2;
END;
CREATE OR REPLACE PACKAGE BODY Subixclt IS
FUNCTION BEFOREREPORT(L_ORDERED IN VARCHAR2)RETURN VARCHAR2 IS
BEGIN
Fnd_File.PUT_LINE(Fnd_File.LOG,'L_ORDERED'||L_ORDERED);
DECLARE
LP_ORDERED_BY VARCHAR2(50);
L_ORDERED VARCHAR2(50);
RAISEDBY VARCHAR2(50);
STATUS VARCHAR2(50);
CLAIMANT VARCHAR2(100);
EXPENSE_DATE_FROM DATE;
EXPENSE_DATE_TO DATE;
BEGIN
IF (LP_ORDERED_BY='Expense Report Number') THEN
 LP_ORDERED_BY :='order by 1 asc;';
ELSIF (LP_ORDERED_BY='Person Claiming') THEN
 LP_ORDERED_BY :='order by 2 asc;';
ELSIF (LP_ORDERED_BY='Submit Date') THEN
LP_ORDERED_BY :='order by 4 asc;';
END IF;
RETURN(L_ORDERED);
--RETURN NULL;
END;
END;
END;Thanks for looking..
Steven
Edited by: Mr_Alkan on Jun 4, 2010 3:35 PM

One has to initialise a session first for use with Oracle Apps if you want to make it run as a concurrent job.
Any decleration within your package will not be recognised unless initialisation is sucessful.
Investigate the built-in packages:
FND_GLOBAL - for initialisation
FND_SUBMIT - for setting session relevant parameters
-- function returns true or false depending on whether the initialisation was sucessful or not
create or replace function is_Init_OK (p_User_Name in varchar2
 ,p_Responsibility in varchar2
 ,p_Language in varchar2) return boolean as
b_Set_NLS boolean;
b_Set_Mode boolean;
r_ISet fnd_Init := Get_Init_Set(p_User_Name, p_Responsibility);
begin
 -- 1
 fnd_global.apps_initialize(r_ISet.User_ID, r_ISet.Resp_ID, r_ISet.App_ID);
 -- 2
 b_Set_NLS := fnd_submit.set_nls_options(p_Language);
 -- 3
 b_Set_Mode := fnd_submit.set_mode (false);
 return (b_Set_Mode and b_Set_NLS and ( (r_ISet.Resp_ID is not null)
 and (r_ISet.User_ID is not null)
 exception
 when others then
 return false;
end is_Init_OK;
-- for example
declare
l_User_ID number = 'IMPORT_POST'; --- import post user
l_Resp number = 'Import and Posting responsibility' -- import posting responsibility
l_Language varchar2(100) := 'AMERICAN';
b_Init boolean := false;
INIT_EXCEPTION exception;
begin
b_Init := is_Init_OK(l_User_ID, l_Resp, l_Language);
if (not b_Init) then
 raise INIT_EXCEPTION;
end if;
-- conitnue with your processing
exception
 when others then
 when INIT_EXECPTION then
 when others then
end;
/

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

I'm having similar issues with my phone. I got my first iPhone recently, only had an iPod touch gen4 for a little over a year. Updated to 6.0.2 when we got the phone (iPhone 5) a few days before Christmas. When I got home on the evening of January 11, my phone would not connect the router anymore. I was able to get it to connect after resetting the phone and the router, updating the router, and manually connecting. That laste for a few minutes and then wouldn't work anymore. I live in an area with very limited service, we have a network extender installed to help, and I am barely getting a 3G signal at times.
My wife's iPad 4, my touchiPod 4, and all of our laptops are working just fine on the router. When I dropped my kid off at school today, I noticed that I am not even seeing the school network anymore from the parking lot where before I got 3 or 4 bars and could connect to their wifi when I was there. Today my phone goes back and forth between seeing my home network but not connecting, to not even seeing the network at all even from the same room that the router is in.
Hope Apple fixes this problem soon..............

HT4314 Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I

Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.

Contact iTunes
Contact iTunes

Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I can se

Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. When I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.

Hello Vaidas Vaidas,
It sounds like you are noticing someone else is accessing your Clash of Clans data by playing the game and you have tried to reset your Apple ID password. If you are following the steps outlined in this article:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
What is preventing you from changing your password? Any error messages or prompts?
Thank you for using Apple Support Communities.
All the best,
Sterling

I have a VGA adapter and an iPad2. Tried projecting my iPad2 to projector using the VGA but doesn't work. Tried it with friend's iPad1 and it works. Why??

I have a VGA adapter and an iPad2. Tried projecting my iPad2 to projector using the VGA but doesn't work. Tried it with friend's iPad1 and it works. Why?? Pls help.

Yup - nothing happens. I then took the same VGA cable and plugged it into my friend's iPad1 and it worked perfectly when she opened Keynote. My understanding is that the iPad2 mirrors the entire screen, so no need to go into any specific application in order to project to the screen, right? Do I need to download any specific app or change any settings in order to be able to project the screen using VGA?
Sorry - novice at this. Not very tech minded either...

Program compiles, but does not run

To: XCode Users <[email protected]>
From: Brigit Ananya <[email protected]>
Subject: Program compiles, but does not run
I am trying to port a Java application from the PC to the Mac. I am using XCode and the program compiles, but it does not run.
When I try to run the ...app, I get the message that the main class is not specified, etc.
When I try to run the ...jar, I do not get the message that the main class is not specified, but I do get the message that there is no Manifest section for bouncycastle, etc.
Here are the detailed messages I get in the Console when I try to run the program:
When I try to run the ...app, I get the following message:
1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] [LaunchRunner Error] No main class specified
1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] [JavaAppLauncher Error] CallStaticVoidMethod() threw an exception
1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] Exception in thread "main" java.lang.NullPointerException
1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] at apple.launcher.LaunchRunner.run(LaunchRunner.java:112)
1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] at apple.launcher.LaunchRunner.callMain(LaunchRunner.java:50)
1/9/09 7:21:17 AM [0x0-0x8c08c].com.AnanyaSystems.AnanyaCurves[2253] at apple.launcher.JavaApplicationLauncher.launch(JavaApplicationLauncher.java:52)
When I try to run the ...jar, I do get the following message:
1/9/09 7:22:43 AM [0x0-0x8d08d].com.apple.JarLauncher[2262] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:374)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] Exception in thread "main"
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] java.lang.SecurityException: no manifiest section for signature file entry org/bouncycastle/asn1/DEREnumerated.class
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.security.util.SignatureFileVerifier.verifySection(SignatureFileVerifier.java:377)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.security.util.SignatureFileVerifier.processImpl(SignatureFileVerifier.java:231)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.security.util.SignatureFileVerifier.process(SignatureFileVerifier.java:176)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.util.jar.JarVerifier.processEntry(JarVerifier.java:233)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.util.jar.JarVerifier.update(JarVerifier.java:188)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.util.jar.JarFile.initializeVerifier(JarFile.java:325)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.util.jar.JarFile.getInputStream(JarFile.java:390)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.misc.URLClassPath$JarLoader$1.getInputStream(URLClassPath.java:620)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.misc.Resource.cachedInputStream(Resource.java:58)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.misc.Resource.getByteBuffer(Resource.java:113)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.net.URLClassLoader.defineClass(URLClassLoader.java:249)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.security.AccessController.doPrivileged(Native Method)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.lang.ClassLoader.loadClass(ClassLoader.java:316)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:280)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
1/9/09 7:28:45 AM [0x0-0x8f08f].com.apple.JarLauncher[2277] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:374)
I do specify the main class in both, the Manifest file and the Info.plist file, in the correct way, "package.MainClass". Is there another place where I need to specify it?
Why do I need org/bouncycastle/asn1/DEREnumerated.class, and how would I have to specify it in Manifest?
I also posted these questions at Mac Programming at forums.macrumors.com and at Xcode-users Mailing List at lists.apple.com/mailman/listinfo, but I did not get any answer.
Please help! Thanks!

There was something wrong with my Info.plist file.
So, here is my corrected Info.plist file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
 <key>CFBundleDevelopmentRegion</key>
 <string>English</string>
 <key>CFBundleExecutable</key>
 <string>AnanyaCurves</string>
 <key>CFBundleGetInfoString</key>
 <string></string>
 <key>CFBundleIconFile</key>
 <string>AnanyaCurves.icns</string>
 <key>CFBundleIdentifier</key>
 <string>com.AnanyaSystems.AnanyaCurves</string>
 <key>CFBundleInfoDictionaryVersion</key>
 <string>6.0</string>
 <key>CFBundleName</key>
 <string>AnanyaCurves</string>
 <key>CFBundlePackageType</key>
 <string>APPL</string>
 <key>CFBundleShortVersionString</key>
 <string>0.1</string>
 <key>CFBundleSignature</key>
 <string>ac</string>
 <key>CFBundleVersion</key>
 <string>0.1</string>
 <key>Java</key>
 <dict>
 <key>JMVersion<key>
 <string>1.4+</string>
 <key>MainClass</key>
 <string>AnanyaCurves</string>
 <key>VMOptions</key>
 <string>-Xmx512m</string>
 <key>Properties</key>
 <dict>
 <key>apple.laf.useScreenMenuBar</key>
 <string>true</string>
 <key>apple.awt.showGrowBox</key>
 <string>true</string>
 </dict>
 </dict>
</dict>
</plist>Ok, so now I can at least run the AnanyaCurves.jar file by double-clicking on it.
However, I still cannot run the AnanyaCurves.app file. When I double-click on it, I get the following message in the Console:
1/11/09 5:12:26 PM [0x0-0x67067].com.apple.JarLauncher[1128] at ananyacurves.AnanyaCurves.main(AnanyaCurves.java:1961)
1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137] [JavaAppLauncher Error] CFBundleCopyResourceURL() failed loading MRJApp.properties file
1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137] [LaunchRunner Error] No main class specified
1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137] [JavaAppLauncher Error] CallStaticVoidMethod() threw an exception
1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137] Exception in thread "main" java.lang.NullPointerException
1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137] at apple.launcher.LaunchRunner.run(LaunchRunner.java:112)
1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137] at apple.launcher.LaunchRunner.callMain(LaunchRunner.java:50)
1/11/09 5:13:11 PM [0x0-0x6a06a].com.AnanyaSystems.AnanyaCurves[1137] at apple.launcher.JavaApplicationLauncher.main(JavaApplicationLauncher.java:61)Why is it looking for the MRJApp.properties file? Isn't this outdated? Shouldn't it look for the Info.plist file? I do not have a MRJApp.properties file.
Also, in the Run menu of my XCode project, Go, Run, and Debug are disabled, but perhaps this has to do with not being able to run the AnanyaCurves.app file.
Thanks for your time! I really appreciate any help you can give me!

After i update the 10.10.2 OS X Yosemite my iPhoto stops working. In the warning that appears when I try to open the app says that happened a mistake because of this update. I reinstalled the app but doesn't work anyway. Please, HELP!

after i update the 10.10.2 OS X Yosemite my iPhoto stops working. In the warning that appears when I try to open the app says that happened a mistake because of this update. I reinstalled the app but doesn't work anyway. Please, HELP!

I already tried that but it doesn't work. Appears a warning saying: "See the developer to make sure that iPhoto works with this version of OS X. You may need to reinstall the application. Be sure to install all available updates in the application and OS X."

I accidently turned voice over on,I've tried triple clicking the home button to bring up voice over options but doesn't work. I can't scroll down to get to Accesibility in genereal even with three fingers.

I accidently turned voice over on,I've tried triple clicking the home button to bring up voice over options but doesn't work. I can't scroll down to get to Accesibility in genereal even with three fingers.

This article can show you how to disable it through iTunes on a PC/Mac:
iOS: Configuring accessibility features

I was wondering if there's a way to connect to my work server from my home iMac i7. I can't seem to get Share Screen to work. I have tried connecting to server using the vnc but doesn't work.

I was wondering if there's a way to connect to my work server from my home iMac i7. I can't seem to get Share Screen to work. I have tried connecting to server using the vnc but doesn't work.

The easiest way would be to use Back to My Mac, but that will only work if the server is a Mac running OS X 10.7 or later and you have the cooperation of the network administrator.
OS X: Using and troubleshooting Back to My Mac with your iCloud account

Firefox crashing AND the scroll feature on my PC finger pad works with other browsers, but doesn't work on Firefox, which just happened since I updated. FRUSTRATING!

Since I updated, Firefox is crashing daily. The finger scroll feature on my PC works with other browsers, but doesn't work on Firefox. It is also very, very slow, but other browsers aren't. I can't use it anymore until it's fixed.

To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)
*http://kb.mozillazine.org/about:config

I have internet optic fiber connection and I'm trying to configure it with my Airport Express but doesn't works, appears that I have IP and DNS, as I'm a computers dummy , who could help me to configuration it, please?

I have internet optic fiber connection and I'm trying to configure it with my Airport Express but doesn't works, appears that I have IP and DNS, as I'm a computers dummy , who could help me to configuration it, please?

You're welcome.
Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception.

Program compiles but doesn't work

Similar Messages

Maybe you are looking for