Program Container Timeline Gantt Chart Applet (Home Page)

This Applet "Program Container Timeline Gantt Chart Applet (Home Page)" is present in 7.5.3.x version when searched in Tools but the same is not present in 8.1.1.x version.
1. Has this been replaced by any other applet with different naming convention ?
2. Since this is not present in the 8.1.1.x repository itself is there any functional change ?
3. If customer wants to use this applet how should he proceed so that all the controls work in this applet ?

Similar Messages

Generic Service - Charts on Home Page...Sometimes?

Greetings all -
I am using OEM 12.1.0.2, with Oracle Beacon(3.9+) 12.1.0.2
Here is the scenario -
I navigate to 'targets - services' off the top drop down.
I select 'beacons' off the 'Sevices Features' drop down.
I select 'add' - Give it a name (Bob_Beacon) - select an agent - next to 'Enable Message ID Request Header' I select Yes. Click create - (receive message Bob_Beacon was created successfully and ok that).
Now, I expand the agent where I created the Beacon - and click on Bob_Beacon.
I go to 'Monitoring Configuration' from the beacon drop down (just below Bob's name).
The Monitoring Configuration clearly shows 'Enable Message ID Request Header' set to FALSE.
I can change it to 'TRUE' and save...it does seem to stick.
So, I continue...back to Targets -> Services off the top drop down.
Here click add. Give it a name - BobService, select timezone, and next.
Leave availability at 'based on service test' and next.
For Service Test, I select HTTP PING, give it a name(BobHTTPPing), change freq to 3 min, and supply a url. Finally Next.
Beacons - click add, put a check next to Bob_Beacon and select, then next.
Performance - leave total time, but click add - should show 'status' - click continue, note chart on homepage says 'total time'. click next.
Leave usage metrics as is - just select next.
Select Finish.
So here's the rub. In a day or two, I come back to grid to check on the new service. Some, show 'no data is currently available' for chart on the home page of the service. Others show data. I can track down no rhyme or reason why some do and some don't.
Are there additional steps required? I haven't defined SLA calendars for any, (those that show charts, and those that don't.) Those that don't show are chart on home page, also display empty charts on the the 'charts tab.' But if I go to the 'Test Performance' tab, a chart is visible with data.
Plz try the steps listed here, and let me know if you receive the same results.

As a followup -
It is interesting...the latest one.... BOBSERVICE indeed has charts on the home page & charts page.
I actually created that one yester, while doing the post, to ensure the steps listed were accurate.
But many others don't have the charting.
I can post screen shots, etc... of setting one up...
What 3rd party website works well for uploading screenshots and posting the image links here...
Do advise...
D

I would like to delete this program and go back to yahoo home page.

I just want to delete firefox and go back to my yahoo home page. I cannot understand this program and I cannot get my bookmarks back that have all my bill information.

In order to set up your Yahoo page as your Home Page, refer to this help article on "[https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page?s=home+page&r=0&as=s How to Set Up a Home Page]".
Not sure how you lost your Bookmarks, but this help article on "[https://support.mozilla.com/en-US/kb/Lost%20Bookmarks?s=recovering+bookmarks&r=0&as=s Lost Bookmarks]" may help.

I had the smart print program from HP on my Mozilla home page, but you apparently no longer support this. Why not? I am very disappointed.

When I downloaded the latest version of firefox I was informed that the program is no longer supported and there is apparently no recourse. It has always been very helpful in printing web pages.

hello dskahler, you'll have to contact hp's site to see if there's an update available for this extension or else contact their support. since it's always the task of an extension's developer to keep it updated or make the necessary adjustment for it to work in new versions of the browser...

TaskListener is not working in ADF Project Gantt Chart..?

I have a Project Gantt Chart in One Page with Tasks. Also I have added TaskListener to that. My requirement is When i click on the Task listener, It should go to the corresponding Task in the next page. Instead of that its showing same Task(1st Task) eveytime in the next page...
My Bean Code :
    public void doSelectTasks(TaskSelectionEvent taskSelectionEvent) {
        if (!queueActionOnCommandComponmentById(HIDDEN_NAV_BUTTON)) {
                    _logger.severe("Error: unable to locate hidden havigation component " + HIDDEN_NAV_BUTTON);
I have added a Hidden Button. to Navigate to the Next Page
My Gantt Chart Code :
<dvt:projectGantt id="gantt1" value="#{bindings.JobsVO2.projectGanttModel}"
                        dataChangeListener="#{bindings.JobsVO2.projectGanttModel.processDataChanged}" var="row"
                        startTime="1975-04-22" endTime="2015-07-21" summary="Check"
taskSelectionListener="#{backingBeanScope.TaskSelectListener.doSelectTasks}" rowSelection="single">
<f:facet name="major">
          <dvt:timeAxis scale="weeks" id="ta1"/>
        </f:facet>
        <f:facet name="minor">
          <dvt:timeAxis scale="days" id="ta2"/>
        </f:facet>
        <f:facet name="nodeStamp">
          <af:column sortProperty="#{bindings.JobsVO2.hints.JobId.name}" sortable="false"
                     headerText="#{bindings.JobsVO2.hints.JobId.label}" id="c1">
            <af:outputText value="#{row.JobId}" shortDesc="#{bindings.JobsVO2.hints.JobId.tooltip}" id="ot1"/>
          </af:column>
        </f:facet>
        <af:column sortProperty="#{bindings.JobsVO2.hints.JobTitle.name}" sortable="false"
                   headerText="#{bindings.JobsVO2.hints.JobTitle.label}" id="c2">
          <af:outputText value="#{row.JobTitle}" shortDesc="#{bindings.JobsVO2.hints.JobTitle.tooltip}" id="ot2"/>
        </af:column>
        <af:column sortProperty="#{bindings.JobsVO2.hints.MinSalary.name}" sortable="false"
                   headerText="#{bindings.JobsVO2.hints.MinSalary.label}" id="c3">
          <af:outputText value="#{row.MinSalary}" shortDesc="#{bindings.JobsVO2.hints.MinSalary.tooltip}" id="ot3">
            <af:convertNumber groupingUsed="false" pattern="#{bindings.JobsVO2.hints.MinSalary.format}"/>
          </af:outputText>
        </af:column>
        <af:column sortProperty="#{bindings.JobsVO2.hints.MaxSalary.name}" sortable="false"
                   headerText="#{bindings.JobsVO2.hints.MaxSalary.label}" id="c4">
          <af:outputText value="#{row.MaxSalary}" shortDesc="#{bindings.JobsVO2.hints.MaxSalary.tooltip}" id="ot4">
            <af:convertNumber groupingUsed="false" pattern="#{bindings.JobsVO2.hints.MaxSalary.format}"/>
          </af:outputText>
        </af:column>
        <af:column sortProperty="#{bindings.JobsVO2.hints.StartDate.name}" sortable="false"
                   headerText="#{bindings.JobsVO2.hints.StartDate.label}" id="c5">
          <af:outputText value="#{row.StartDate}" shortDesc="#{bindings.JobsVO2.hints.StartDate.tooltip}" id="ot5">
            <af:convertDateTime pattern="#{bindings.JobsVO2.hints.StartDate.format}"/>
          </af:outputText>
        </af:column>
        <af:column sortProperty="#{bindings.JobsVO2.hints.EndDate.name}" sortable="false"
                   headerText="#{bindings.JobsVO2.hints.EndDate.label}" id="c6">
          <af:outputText value="#{row.EndDate}" shortDesc="#{bindings.JobsVO2.hints.EndDate.tooltip}" id="ot6">
            <af:convertDateTime pattern="#{bindings.JobsVO2.hints.EndDate.format}"/>
          </af:outputText>
        </af:column>
/dvt:projectGantt>
      <af:button text="Hidden Navigation" id="h_navb2" action="toF2" visible="false"/>
Can somebody tell me where Im wrong and Is there anything else i have to do..?
Please help....

Hi,
Yes, Its prints the task Im clicking-on. But in the next page its showing only the same task(1st task)... It prints the correct task Im clicking-on

Why can't Dreamweaver CS3 locate my site's home page?

I am getting an error message stating, "The selected folder does not contain the current site's home page. The site map cannot be built."
I have gone into manage sites numerous times and verified that the correct path is there for the main documens and the image files. This location has not changed since I created this site. Any idea why it cannot locate the home page? If it is looking for index.html, that file is located in the path that I am using.
Help!!!

www.mlh-hi.com - This message is no longer showing up when I go into Manage sites.
FYI,
Thanks!

Problems with Gantt Chart

Hi,
I have a Gantt Chart in my page, but there is something wrong with the scales; the major scale says, for example, "Monday, Oct 12", but the minor scale says "S" for sunday and then the major scale says "Tuesday, Oct 13" and the minor "Monday" and so on; they doesn´t correspond to each other... This is just happening in spanish, in english everything is fine, I don't know what can I do to fix this.
I have another problem in the same Gantt: one task has "16/10/2009 08:00:00 a.m." for start date and "17/10/2009 08:00:00 p.m." for end date, which gives a duration of 2 days, but in the gantt it is displayed as a 3 days duration!! this happen for every task in the gantt. I've been testing and I found that if I change the end date to "17/10/2009 06:00:00 p.m." (just changing 8 to 6 pm) the duration is displayed just fine, with the 2 days it should be. Actually this strange behavior happens only when the hour is equal or grater than 8:00pm. I've searched in the developers guide but it doesn't say anything about this; I don´t know if the OAF Gantt use some e-business parameter, or something; I really don´t know what can be happening.
I hope you can help me!
Thanks and regards,
Carlos V

Not sure about changing the scale at runtime but from what I've learned, if it can't be done in Crystal Reports itself - it can't be done via code. And in CR the only way I know of is to do the multiple charts in multiple subsections and conditionally suppress based on the number of records (Projects in your case).
You could go to the development forum and ask the question about doing it programatically.

Print Gantt chart without wasting paper

I have few tasks but a long date range to plot- a short and wide gantt chart. Is there a way to wrap the gantt chart onto one page or set printing options so that it only plots say the top 4 inches of each page?

KYRep,
If all you want to show is the long tasks I think you best bet is to set the timescale to months, or years as appropriate so you will be able to see the start and finish together in the view. There is little benefit to having a fine timescale (e.g. days)
if all it will show is a looooooong Gantt bar.
And no, you can't "wrap" the Gantt Chart. You can however control the tasks that are printed by employing a filter. Set up a filter for just those long tasks you wan to show and then print with the filter applied.
Hope this helps.
John

Firefox home page opens with jzip and will not open as google, yahoo, unless manually entered - plus window appears asking to set yahoo as default but doesn't work. t

I have tried all the home page set-up options without success. I have deleted Firefox and reloaded with no change. The Firefox program will open with no other home page but jzip.com

Hi,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Tips for developing Gantt chart

Can anyone say me how to create a Gantt chart...Or any link for sample programs for creating gantt chart without using any tool...Is it possilbe to develop without using any tool?

Hi Shallini,
Depends what you are calling a tool. Some IDE is nice, but I guess the minimal tools for creating a java application are a text editor and a java compiler. I once had a job interview where I had to develop a small application using notepad and javac on windows' cmd. I like eclipse better ;-).
As for gantt charts, here:
http://www.java2s.com/Code/Java/Chart/Gantt-Chart.htm
Michael

Firefox starts up, and when home page pressed, program does not respond. What can be done?

When Firefox is started, the circular think button continues to run, but the program has only started one new tab. When the Home Page button is clicked, program seems to lock in a 'Firefox not Responding' error message. When I try to shut it down by using upper right corner X, it gives two choices, "Wait for the program to respond" of "Shut down program". I choose Shut down program, and in the background a message saying 'Windows checking for a solution' although it never comes back with one. What I'd like to know is will Firefox save my bookmarks if program is deleted and a newer version of Firefox is downloaded?

Please update to the current Firefox 27 release.
*Help > About Firefox
You can find the full version of the current Firefox 27.0.1 release in all languages and for all Operating Systems here:
*http://www.mozilla.org/en-US/firefox/all.html
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Since installing ICloud, and updating IO, programs and websites close whenever I scroll, going back to home page. I have tried turning it off, but that does not work. Can anyone help me out? Also, the keyboard is very slow.

I am frustrated with the new update and the ICloud. Any program i open, or website I am in, closes suddenly, an returns to the Home page. Also the keyboard is very slow. None of this existed until I did the two updates. Can anyone help?

MaryAmanda wrote:
Does anyone know anything about onsite specifics?
I'm wondering where the onsite warranty can be in effect. Like, can it be used in ANY city in the US? Can it be used only in metrololitan areas? What is a metro area in Lenovo's eyes?
Does anyone know where I can get better and accurate info on the onsite warranty? Like a coverage map would be very helpful. Because why should I spend the money on it, if I can't access it?
Looking forward to more info...thanks.
There is no coverage map as such.
I live in what is considered a rural area and had techs driving 60-70 miles one way to get to me, never an issue.
Obviously, YMMV.
In my not-so-modest experience, both onsite and accidental damage upgrades are worth every penny if one intends to keep their ThinkPads for an extended period of time.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

How do you set a default Home Page in the Safari Applet?

How do you set a default Home Page in the Safari Applet?

How do you set a default Home Page in the Safari Applet?

Global Web Applets and My Custom Home Page Report

Hello,
I setup a custom "My Home Page Report" which is great but does not display the report when you load the home page without clicking the "Generating analysis... Click here to view the results" link. Is there a way around this?
I then setup a a Global Web Applet and embedded this on the main home page. When doing this I found you cannot have 1 section that spans the entire width of the page as you can with a report (To my knowledge?). I then tried putting two Custom Web Applets side by side to display the graph and report I wanted. This works however, I have vertical scroll bars although the reports are perfectly displayed and do not require any scrolling. Is there a way to get rid of the scroll bars?
Regards
Innoveer

Innoveer, you can contact customer care and ask them to provision your On Demand application with the custom homepage "Execute Report Immediately" option. However, you want to make sure that this custom report loads quickly - if not it will delay the loading of your homepage.

How do I keep programs from changing my home page

Everytime Firefox starts, another program keeps changing my home page. How do I stop this from happening?

This could be caused by either of the following (and possibly other things, but these are the ones that come to mind first):
(1) Bad Extension
You can review/disable/remove nonessential or unrecognized extensions here:
orange Firefox button (or Tools menu) > Add-ons > Extensions category
Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
(2) user.js file
This is a configuration file that overrides changes you made in Firefox every time you exit and restart the browser. To track down and remove such a file, check out the steps in this article: [[How to fix preferences that won't save]].
Note: if it comes back, the home page URL might provide a cue as to what program on your computer is creating/editing the user.js file.

Program Container Timeline Gantt Chart Applet (Home Page)

Similar Messages

Maybe you are looking for