Program control - SapScript assigned problem.

I assigned a Z program control (A) to Z SapScript, and works fine. I must to change Z program control (B) and I assigned it to Z Sapscript. My problem is because when I assigned Z program to Z Sapscript with TX SE71 - Layout - Text - print program selection dialog, the standar program SAPMV45A is over my Z program (B). Z program (B) is a copy from YBAA_RVADOR01, for sales order form.
Problem is when I print, SapScript texts are not sending from my Z program control (B), and form look empty.
Some body can help me please?.
Thanks in advanced.

SOLVED.
Re: When calling SAP SCRIPT from function module, variables are not passing
The SAPSCRIPT can see the global variable of driven program or the program set in OPTION-TDPROGRAM (it's field of import parameter OPTION of fm OPEN_FORM)
Regards.

Similar Messages

Program and Script Assignment Problem in J1IV

Hi All,
I am assigning a Z program and a Z script to the transaction J1iV through the transaction NACE.
But while executing the transaction J1IV, the system is executing the program
J_1IEXCP_OUTPUT.
I have created my own output type ZEX2 , now I am not getting how to attach this output type to the transaction J1Iv.
Can any body please tell the settings to be done to attach the z program and z form to the transaction J1iV.

Did you implement the following as in the note :
>> Solution
Implement the attached correction instructions.
ShabZ

Problem creating an association in the Default Programs control panel

I have AOL mail. I have typed a letter in WordPad that I want to send in an e-mail. I am receiving this message....There is no e-mail program associated to perform the requested action. Please install an e-mail program or, if one is
already installed, create an association in the Default Programs control panel....I have a very basic knowledge of computers, so please consider this when answering my question....I do not have any idea what to do.

Hi,
So we are not using office outlook to send e-mail here?
Regarding AOL mail issue, we'd better ask them here:
AOL community support
http://help.aol.com/help/microsites/searchEntry.do?tab=cs&searchString=how+to+send+text+to+aol+mail&radios=true&searchTitle=
For how to create an association in the Default Programs control panel, we could take a look in the thread below:
How do I create an association in
the Default Programs control panel of Windows 7?
Best regards
Michael Shao
TechNet Community Support

HT201210 After downloading latest version of iTunes it will not open. This error message is displayed; The program can't star because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. Then a second error box

After iTunes requested that I download latest version on PC it now will not open. 2 error messages appear. first: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. second: iTunes was not installed correctly please reinstall iTunes. Error 7 (Windows error 126). I have tried reinstalling a number of times and restarting computer but no luck.

This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel

I just installed Window 7 professional in place of Windows 7 Ultimate RC to which I subscribed. I was not pleased to do a clean install as opposed to an upgrade and was not informed about it.
When I reinstalled Office 2007, my outlook does not work, although exchange on the web works. I get the following error message:
There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel

Louis,
This issue may occur if the Outlook registry key is corrupted. When other programs try to use the Outlook Simple MAPI interface, they cannot retrieve the required information from the registry.
You must first remove the corrupted Outlook registry key, and then perform a Detect and Repair operation to have Outlook rebuild the key. To do this, follow these steps:
Click Start, and then click Run.
In the Open box, type regedit, and then press ENTER.
In Registry Editor, locate the following subkey in the registry: HKEY_LOCAL_MACHINE\Software\Clients\Mail\Microsoft Outlook
Select the subkey, and then press DELETE.
Click Yes.
Quit Registry Editor.
Start Outlook.
On the Help menu, click Office Diagnostics.
Follow the instructions on the screen to complete the repair.
Important: Above section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows.
Hope above information helps.
Pooja Katiyar

When running setup, I get"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel.

whe I try to install Firefox 4.0.1, I get a Red X message. ""This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel. Is there a fix?

I Did that. When I try to install, I get the same message. I have come to believe this is a windows 7 or IE 9 problem. I also have active X problems that I can not resolve. I can not open Gmail also

I keep getting this error message when i try to install the latest version of itunes, the program can't start because MSVCR80.dll is missing from your computer. try reinstalling the program to fix this problem??

I am having trouble reinstalling my Itunes on my desktop which uses Windows 7 and I can download it but once it's complete i keep getting this error message...The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. Please help me.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Opening iTunes shows an error- The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem. ; Even after reinstalling iTunes doesn't start!

When I start the iTunes program it comes up with this.. pls help!!
"The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem."
Even after reinstalling iTunes doesn't start!

Repair your Apple Application Support.
Control Panel > Programs n Features (Win7) or Add n Remove Programs(XP) > highlight AAS, click CHANGE then REPAIR.

U00BFCan I use a function module as a driver program for sapscript?

Hi,
I have to use a function module as driver program for sapscript and there is no any value in the form (the data are not transferred)...
but if I call the sapcript from a report with the same code as in my function module all the data are transferred OK.
please, can you tell me if there is any problem in use of a function module in this case? is it impossible at all or is there any tip to apply?
thank you all in advance.

Hi,
first of all it is possible to use a function module to process a SapScript form.
The mistake on your side is probably the definition of the variables that you want to pass to the form. Please make sure they are defined as global (via SE37 --> Goto --> Global Data) then it should be working.
In addition you could take a look at e.g. function module "PRINT_DUNNING_NOTICE". This is SAP standard and they are using it to print a SapScript form.
Best regards
Arno Speitkamp

Deactivate caps lock key under program control

Is it possible to deactivate the caps lock key under program control?
[For those who are curious, if I log into my home computer using VNC if someone at the computer presses the caps lock key that affects me!]

My problem with the Bluetooth Mighty mouse is that sometimes when click on an object, nothing happens. I can only move the cursor on the screen but clicking doesn't work. So I have to turn off the mouse for 20 sec and after I switched it back and it works. What I also notest is when I move an object on the screen with the mouse it goed not as smooth as with my wired one.

Getting this error while opening a folder : This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel

Hi,
While trying to open a folder on my Windows 7 Home Premium, an error comes "This file does not have a program associated with it for performing this
action. Please install a program or, if one is already installed, create an association in the Default Programs control panel." I tried searching on the net but did not get great support for the issue when it happens with folder opening.

Hi Nikunj Shah,
First, I suggest you download
Microsoft Safety Scanner or
Malicious Software Removal Tool to run a full scan.
The error messages here seems to be caused by the corrupted registries, which related with the folder association.
You may take a try to merge the following registry settings to reset the folder association, before that, remember to backup your registry settings first:
How to back up and restore the registry in Windows
Copy and paste the following commands into Notepad, and save it to a .reg file:
=================
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Folder]
"ContentViewModeLayoutPatternForBrowse"="delta"
"ContentViewModeForBrowse"="prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified"
"ContentViewModeLayoutPatternForSearch"="alpha"
"ContentViewModeForSearch"="prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay"
@="Folder"
"EditFlags"=hex:d2,03,00,00
"FullDetails"="prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size"
"NoRecentDocs"=""
"ThumbnailCutoff"=dword:00000000
"TileInfo"="prop:System.Title;System.ItemTypeText"
[HKEY_CLASSES_ROOT\Folder\DefaultIcon]
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\explore]
"MultiSelectModel"="Document"
"ProgrammaticAccessOnly"=""
"LaunchExplorerFlags"=dword:00000018
[HKEY_CLASSES_ROOT\Folder\shell\explore\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\open]
"MultiSelectModel"="Document"
[HKEY_CLASSES_ROOT\Folder\shell\open\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e,00,65,00,78,00,\
65,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess]
"MUIVerb"="@shell32.dll,-8518"
"MultiSelectModel"="Document"
"Extended"=""
"LaunchExplorerFlags"=dword:00000003
"ExplorerHost"="{ceff45ee-c862-41de-aee2-a022c81eda92}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow]
"MUIVerb"="@shell32.dll,-8517"
"MultiSelectModel"="Document"
"OnlyInBrowserWindow"=""
"LaunchExplorerFlags"=dword:00000001
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\BriefcaseMenu]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Library Location]
@="{3dad6c5d-2167-4cae-9914-f99e41c12cfa}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Offline Files]
@="{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000}]
@=""
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\BriefcasePage]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\Offline Files]
@="{7EFA68C6-086B-43e1-A2D2-55A113531240}"
[-HKEY_CLASSES_ROOT\Folder\ShellNew]
[HKEY_CLASSES_ROOT\Folder\ShellNew]
"Directory"=""
"IconPath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,\
00,00
"ItemName"="@shell32.dll,-30396"
"MenuText"="@shell32.dll,-30317"
"NonLFNFileSpec"="@shell32.dll,-30319"
[HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
"AllDrives"=""
"IsFolder"=""
"NoExtension"=""
==================
Once done, right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the
Import option from the File menu, to merge the REG file contents.
Let me know if you need any further help.
Best regards
Michael Shao
TechNet Community Support

Tying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Help

am tTying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Can anyone help me?

Hi,
Here is a similar thread for your reference:
There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel
http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/036e3cf6-bff7-4ef2-bd0a-555cd2399ad4
Hope this helps
Vincent Wang
TechNet Community Support

I was told to update iTunes. The update failed. Now I can't open iTunes but get the following messages: The program can't start because MSVCR80.dll is missing from your computer. Try reinstating the program to fix this problem. Then I get iTunes was not

I was told to update iTunes. I did and it failed. Then every time I tried to open iTunes I get the following message: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." Then I get the following: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126)." I have uninstalled and installed iTunes a couple of times with no luck. I cannot even access iTunes support

Troubleshooting issues with iTunes for Windows updates - MSVCR80

TS5376 iTunes wont install. It says " The program can't start because MediaAccessibility.dll is missing from your computer. Try reinstalling the program to fix this problem." I have uninstalled iTunes 5 times and reinstalled it, and nothing has worked.

iTunes wont install. It says "The program can't start because MediaAccessibility.dll is missing from your computer. Try reinstalling the program to fix this problem." I have uninstalled iTunes 5 times and reinstalled it, and nothing has worked. Help!!!!

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683)

All of a sudden I'm getting a 'itunes.exe - system error It says the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. I have tried to reinstall and still can't open itunes. help!

all of a sudden I'm getting a 'itunes.exe - system error It says the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. I have tried to reinstall and still can't open itunes. help!

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Program control - SapScript assigned problem.

Similar Messages

Maybe you are looking for