Program Data

As the previous questions asked and read through the answers, it puzzles me to which program data you are referring to. I have a similar problem. When I initially installed the Kaspersky anti virus 2014 program on my laptop. Kaspersky was (as I tried
to assess) constantly preforming an update and storing all the data in this program data file located on c: drive right click, open and you can choose the program data file. This shows all the program files downloaded I suppose. When you select Kaspersky it
shows you all the stored files which already has taken up 65 Gig of space on the hard drive. Accumulated in a few days.
What I need to know is can I delete these files or will this harm the downloaded programs?
How does this influence the windows 7 operating system and registry?
Is there perhaps a virus hidden in the works that the antivirus program is not detecting?
Just for info I have already contacted Kaspersky on this matter and they replied suggesting to disable reporting and quarantine in the setting which have proved fruitless.
Attached are two pictures of the program data file.
Your help will be appreciated.

Do not expect reaction to "previous questions" if you do not refer to URL.
For Kaspersky software ask in support forum of Kaspersky
http://forum.kaspersky.com/
No pictures are attached.
Try to formulate your problem more clearly and focus on sigle problem that is described in the same thread. Refering to another thread make readers skip your thread.
Regards
Milos

Similar Messages

  • Windows 8.1 search not working- program- data missing

    Hi :)
    I followed the instructions here 
    http://social.technet.microsoft.com/Forums/windows/en-US/bb1ba41a-80d9-4036-974b-50e81dc99893/windows-81-search-not-working?forum=w8itprogeneral
    but program-data is not in there
    Tried searching for how to correct this but no luck atm
    Any advic eplease
    Cheers :)

    Hi,
    Please show hidden files and then you will see ProgramData, then try the steps in the link you mentioned.
    Please also try this command to repair your PC:
    dism /online /cleanup-image /restorehealth
    Kate Li
    TechNet Community Support

  • Error message-The installer has insufficent privileges to modify this file:C:\Program Data\microsoft\windows\start menu\programs\iTunes\.iTunes.ink

    error message-The installer has insufficent privileges to modify this file:C:\Program Data\microsoft\windows\start menu\programs\iTunes\.iTunes.ink     
    How do I correct this to download iTunes so it will run?

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • How to refer the Program Data directory in Win 7 through Flex?

    Hi All..!
    I have a requirement, in which I have to store some files in the Program Data directory in Win 7... What I can't find is, how to get the path to this directory through Flex. I was hoping to find something similar to the File.userDirectory.resolvePath method... So far, nothing.. Also, I needed to know what is the equivalent folder of Program Data on Mac... Please help..
    Thanks..!!

    Create a servlet which gets an InputStream of the file and writes it to the OutputStream of the response and call this servlet in `src` attribute. That's basically all.
    Here's an example which covers the most of the minimum needs: [http://balusc.blogspot.com/2007/04/imageservlet.html].

  • Can't create directory c:\Program Data\Apple Computer\iTunes

    While installing iTunes, get message "can't create directory c:\Program Data\Apple Computer\iTunes.  After that, it uninstalls itunes and I'm back to square one.  What can I do or what could be causing this?

    First I think you'll find it is ProgramData without a space. Check for an existing iTunes folder at that location and rename it to Not iTunes. Try again.
    tt2

  • Program data folder

    I might have dropped this problem in the windows vista related questions.
    I am pretty desperate to solve this problem. Is there any solution to this?
    I have read through all previous questions asked and read through the answers, there is no solution found for my problem. When I initially installed the Kaspersky anti virus 2014 program on my laptop. Kaspersky was (as I tried to assess) constantly
    preforming an update and storing all the data in this program data file located on c: drive right click, open and you can choose the program data file. This shows all the program files downloaded, I suppose. When you select Kaspersky it shows you all the stored
    files which already has taken up 65 Gig of space on the hard drive. Accumulated in a few days.
    What I need to know is, can I delete these files or will this harm the downloaded programs?
    How does this influence the windows 7 operating system and registry?
    Is there perhaps a virus hidden in the works that the antivirus program is not detecting?
    Just for info I have already contacted Kaspersky on this matter and they replied suggesting to disable reporting and quarantine in the setting which have proved fruitless.
    I have two pictures of the program data file for further viewing if requested.
    Your help will be appreciated.

    Do not expect we could resolve Kaspersky failed support. Try to continue with Karpersky support. Unless you do a deep analysis with Process Monitor and Process Explorer (Sysinternals) you will notfind the cause of problems.
    If you have any material to share, place it on OneDrive and configure public share.
    Regards
    Milos

  • Transport tools for (program & data)

    Dear forumers,
    Any idea what kind of tools are available for transporting (programs & data) from a development server to test server and then to production server ?
    Would appreciate you could list a few and comment on which likely better tools.
    Regards

    If it is just database objects (tables,packages etc) then you can use export/import. But if you need to transport the filesystem codes also then you need to copy those files as well .. There are lot of tools available to transport filesyetem files starting from simple ftp/sftp.
    So would you please give some more details .. like what kind of programs/data you want to transport.
    ~K

  • PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver.  Deleting bad driver file in adobe program data does not fix the problem,  it simply replaces the text file and crashes again.  My video driver

    PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver.  Deleting bad driver file in adobe program data does not fix the problem,  it simply replaces the text file and crashes again.  My video driver is just fine.  Any help out there?

    rb
    Your video card driver may be fine for something, but just not compatible with Premiere Elements 13/13.1.
    For those with the display card error, the answers include
    a. assure your video card/graphics card driver version is up to date according to the web site of the manufacturer of the card -
    if necessary consider a driver roll back.
    b. determine in Device Manager/Display Adapters if the computer is using 2 cards instead of 1
    c. delete the BadDrivers.txt file
    the rationale for that deletion is found in post 10 of the following older post...principle applies to 13 as well as 9.
    Re: Premiere Elements 9 Tryout Serious Display Problem
    Have you looked for computer ATI card settings that might be more compatible with Premiere Elements 13/13.1?
    When is the program crashing - just opening a new project or rather crashing if editing a particular video format at the Timeline level?
    ATR

  • ITunes & Windows Vista Home - Error File C:\Program Data\Apple Computer\Installer\Cache\iTunes 10.5.142\iTunes.msi was rejected by digital signature policy.

    Tried
    https://discussions.apple.com/thread/2713232?start=0&tstart=0
    and
    http://www.vistax64.com/vista-general/159940-computer-blocking-anything-no-digit al-signature.html
    with no avail!!!
    iTunes opens after I click OK on the above message however I cannot do anything within the app its like Windows it preventing it from running.
    PLEASE HELP!!!

    Update:
    I tried what the diagnostic told me to do, and repaired the installation. I was able to burn a CD in iTunes, but after I restarted, the drives have disappeared again! Here's the diagnostic info now:
    Microsoft Windows Vista Home Edition (Build 6000)
    MICRO-STAR INC. MS-6728
    iTunes 7.6.0.29
    QuickTime 7.4
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    Apple Mobile Device 1.1.3.26
    iTunes Serial Number 20D6EAF059AB94B4
    Current user is not an administrator.
    The current local date and time is 2008-01-15 19:09:32.
    iTunes is not running in safe mode.
    Video Display Information
    ATI Technologies Inc., Radeon X1600/X1650 Series
    ATI Technologies Inc., Radeon X1600/1650 Series Secondary
    ** External Plug-ins Information **
    Plug-in Name: Last.fm iTunes plugin
    Plug-in Loaded: Yes
    Plug-in Version: 0.0.13
    Plug-in File Version: 2.0.13.0
    Plug-in Path: C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
    No drives showed up to be tested.

  • Dialog programming, data being washed out in TAB Control

    Hi,
         i am working on dialog programming , in which i am using Table Control  for user input (data is not coming from database table) . everything is going well till assignment of data to internal table but when
    control goes to PBO by any means like pressing ENTER etc. then data being washed out.
    PROCESS BEFORE OUTPUT.
      MODULE TC_CONTROL.
      LOOP AT it_data
             INTO wa_data
             WITH CONTROL tc_control
             CURSOR tc_control-current_line.
        MODULE tc_control_get_lines.
      ENDLOOP.
    PROCESS AFTER INPUT.
    LOOP AT IT_DATA.
        CHAIN.
          FIELD WA_DATA-FREPS_N.
          FIELD wa_data-TOEPS_N.
          FIELD wa_data-PRCH_A.
          FIELD wa_data-SRVC_AMT .
          FIELD wa_data-ACCNT_C.
          FIELD wa_data-AMT_D.
          FIELD wa_data-NARR_X.
          FIELD wa_data-CRPRD_N.
          MODULE tc_control_modify ON CHAIN-REQUEST.
        ENDCHAIN.
      ENDLOOP.
    *Abap program
    MODULE TC_CONTROL OUTPUT.
    DESCRIBE TABLE it_data LINES tc_control-lines.
    ENDMODULE.                 " TC_CONTROL  OUTPUT
    CONTROLS: TC_CONTROL TYPE TABLEVIEW USING SCREEN 1000,
              TC_CONTROL1 TYPE TABLEVIEW USING SCREEN 1000.
    DATA:     G_TC_CONTROLS_LINES  LIKE SY-LOOPC,
              G_TC_CONTROLS_LINES1  LIKE SY-LOOPC.
    *&      Module  tc_control_get_lines  OUTPUT
          text
    MODULE tc_control_get_lines OUTPUT.
    g_tc_controls_lines = sy-loopc.
    move-corresponding it_data to wa_data.
    ENDMODULE.                 " tc_control_get_lines  OUTPUT
    MODULE tc_control_modify INPUT.
    move-corresponding wa_data to it_data.
    MODIFY it_data
        FROM wa_data
        INDEX tc_control-current_line.
    append it_data.
    clear it_data.
    ENDMODULE.                 " tc_control_modify  INPUT
    Please suggest me any clue.
    Thanks in advance
    vijay dwivedi

    Hi ,
    I have understood the problem.
    In your ABAP code replace all the occurrrences of wa_data  with the structurename.
    Use the TABLES keyword to declare the structure .That structure will be same as
    reference table of the table control .
    Here the structure is SPFLI.
    Check the bellow code , it will resolve the issue.
    ABAP code - -
    program  zsdn.
    tables spfli.  " Declare the structure
    data : it_data like table of spfli with header line,
    *wa_data TYPE spfli,  " commented
    w_i type i.
    *CONTROLS TC_CONTROL TYPE TABLEVIEW USING SCREEN 100.
    controls: tc_control type tableview using screen 1000,
    tc_control1 type tableview using screen 1000.
    data: g_tc_controls_lines like sy-loopc,
    g_tc_controls_lines1 like sy-loopc.
    module tc_control output.
      describe table it_data lines tc_control-lines.
    endmodule. " TC_CONTROL OUTPUT
    module tc_control_get_lines output.
      g_tc_controls_lines = sy-loopc.
      move-corresponding it_data to spfli.
    endmodule. " tc_control_get_lines OUTPUT
    module tc_control_modify input.
      move-corresponding spfli to it_data.
      modify it_data
      from spfli
      index tc_control-current_line.
      append it_data.
      clear it_data.
    endmodule. " tc_control_modify INPUT
    module status_0100 output.
      set pf-status 'STAT'.
    *  SET TITLEBAR 'xxx'.
    endmodule.                 " STATUS_0100  OUTPUT
    module user_command_0100 input.
      case sy-ucomm.
        when 'BACK' or 'EXIT' or 'CANCEL'.
          leave to screen 0.
      endcase.
    endmodule.                 " USER_COMMAND_0100  INPUT
    *&      Module  POPLATE_TABLE  OUTPUT
    *       text
    module poplate_table output.
      if it_data is initial.
        select * from spfli into table it_data.
      endif.
    endmodule.                 " POPLATE_TABLE  OUTPUT
    Screen code (Scr no 1000) - -
    PROCESS BEFORE OUTPUT.
      MODULE status_0100.
      MODULE poplate_table.
      MODULE tc_control.
      LOOP AT it_data WITH CONTROL tc_control CURSOR w_i.
        MODULE tc_control_get_lines.
      ENDLOOP.
    PROCESS AFTER INPUT.
      MODULE user_command_0100.
      LOOP AT it_data.
        MODULE tc_control_modify ON CHAIN-REQUEST.
    *    ENDCHAIN.
      ENDLOOP.
    Regards
    Pinaki

  • Error 8 when starting the extracting the program-data load error:status 51

    Dear all,
    <b>I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). </b>The scenario and related setting are as the flowings:
    A. Setting:
    We have created 2 source system one for the development and another for the quality in BW development client
    1. BW server: SAP NetWeaver 2004s BI 7
    PI_BASIS: 2005_1_700 Level: 12
    SAP_BW: 700 Level:13
    Source system (Development Client 220)
    2. SAP ERP: SAP ERP Central Component 6.0
    PI_BASIS: 2005_1_700 Level: 12
    OS: SunOS
    Source system (Quality Client 300)
    2. SAP ERP: SAP ERP Central Component 6.0
    PI_BASIS: 2005_1_700 Level: 12
    OS: HP-UX
    B. The scenario:
    I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
    After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system – , but now I am unable to load the Info provider from the (Development Client 220),
    Source system Creation:
    For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
    1: Now while at the Info Package : Start data load immediately and then get the
    e-mail sent by user RFCUSER, and the content:
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Service API .
    2:Error in the detail tab of the call monitor as under,
    <b>bi data upload error:status 51 - error: Error 8 when starting the extracting the program </b>
    Extraction (messages): Errors occurred
      Error occurred in the data selection
    Transfer (IDocs and TRFC): Errors occurred
    Request IDoc : Application document not posted (red)
      bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
                                    IDoc sent to SAP system or external program"
      r<b>/3 side: status 51:  IDoc: 0000000000012140 Status: Application document not posted
                                   Error 8 when starting the extraction program</b>
    Info IDoc 1 : Application document posted (green)
       r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
                     IDoc sent to SAP system or external program"
       bw side: "IDoc: 0000000000007089 Status: Application document posted,
                     IDoc was successfully transferred to the monitor updating"
    Have attached screen shots showing error at BW side.
    •     check connection is ok, tried to restore the setting for bw-r3 connection – though same problem
    •     Have checked partner profile.
    <b>what's wrong with the process? </b>
    Best regards,
    dushyant.

    Hi,
       Refer note 140147.
    Regards,
    Meiy

  • View ABAP program data in PDF

    Hello Experts,
    I am working on program to display the invoices data in PDF through ABAP program. For this i have used cl_gui_html_viewer and ALV grid. everything works fine but one. When I click on the PDF preview button on screen then for first PDF its working fine, but when i click on the another PDF preview button then it displays blank screen. In case of rerunning the program it again works fine only for first PDF preview. if anybody have idea regarding this issue please share it with me. FYI i am attaching necessary code with this. 
    Thanks,
    Avadhut

    Hi Alok,
    Here is something wrong in the code i have used it to display PDF.
    METHOD on_link_click.
        DATA : l_str_content TYPE zebd_send_content.
        READ TABLE m_tab_content INDEX row INTO l_str_content.
        DATA: l_xml  TYPE REF TO cl_xml_document.
        CREATE OBJECT l_xml.
        CASE column.
          WHEN 'PRVW'.
            g_attachment_string = l_str_content-attachment.
            CALL FUNCTION 'Z_EBD_PDF_SHOW'
              EXPORTING
                i_id = l_str_content-id
                i_pdf_string = g_attachment_string.
            CREATE OBJECT g_rcl_html_control
              EXPORTING
    *            shellstyle         =
                parent             = g_rcl_html_container
    *            lifetime           = lifetime_default
    *            saphtmlp           =
    *            uiflag             =
    *            name               =
    *            saphttp            =
    *            query_table_disabled = ''
    *          EXCEPTIONS
    *            cntl_error         = 1
    *            cntl_install_error = 2
    *            dp_install_error   = 3
    *            dp_error           = 4
    *            others             = 5
            IF sy-subrc <> 0.
    *         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *                    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
            ENDIF.
    FUNCTION Z_EBD_PDF_SHOW .
    *"*"Local Interface:
    *"  IMPORTING
    *"     REFERENCE(I_PDF_STRING) TYPE  STRING
    *"     REFERENCE(I_ID) TYPE  STRING
      g_attachment_string = i_pdf_string.
      g_id = I_ID.
      call screen 0101 STARTING AT 5 5.
    ENDFUNCTION.
    ***INCLUDE LZ_EBDO01 .
    *&      Module  STATUS_0100  OUTPUT
    *       text
    module STATUS_0100 output.
      set pf-status '100'.
    *  SET TITLEBAR 'xxx'.
      clear: g_url, g_tab_pdf_data,g_attachment_binary.
      free: g_rcl_html_container, g_rcl_html_control.
      create object g_rcl_html_container
        exporting
          container_name = 'PDF'.
      create object g_rcl_html_control
        exporting
          parent = g_rcl_html_container.
    *      lifetime = cl_gui_html_viewer=>lifetime_dynpro.
    *    CREATE OBJECT g_rcl_pdf_control
    *      EXPORTING
    *        parent            = g_rcl_html_container
    **        lifetime          =
    **        shellstyle        =
    **        autoalign         =
    *      EXCEPTIONS
    *        cntl_error        = 1
    *        cntl_system_error = 2
    *        create_error      = 3
    *        lifetime_error    = 4
    *        others            = 5
    *    IF sy-subrc <> 0.
    **     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    **                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *    ENDIF.
    * Convert xstring to binary table to pass to the LOAD_DATA method
      clear g_attachment_binary.
      call function 'SSFC_BASE64_DECODE'
        exporting
          b64data = g_attachment_string
        importing
          bindata = g_attachment_binary
        exceptions
          others  = 8.
      clear g_tab_pdf_data.
      call function 'SCMS_XSTRING_TO_BINARY'
        exporting
          buffer     = g_attachment_binary
        tables
          binary_tab = g_tab_pdf_data.
    * Load the HTML
      clear g_url.
      CONCATENATE g_id '.pdf' into g_id.
      g_rcl_html_control->load_data(
         exporting
           url          = g_id
           type         = 'application'
           subtype      = 'pdf'
         importing
           assigned_url         = g_url
         changing
           data_table           = g_tab_pdf_data
         exceptions
           dp_invalid_parameter = 1
           dp_error_general     = 2
           cntl_error           = 3
           others               = 4 ).
    *     CALL METHOD g_rcl_pdf_control->open_document
    *    EXPORTING
    *      url               = g_url
    *    EXCEPTIONS
    *      cntl_error        = 1
    *      cntl_system_error = 2
    *      others            = 3
    *  IF sy-subrc <> 0.
    **   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    **              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *  ENDIF.
    ** Show it
      g_rcl_html_control->show_url( url = g_url
        in_place = 'X' ).
    endmodule.                 " STATUS_0100  OUTPUT
    Thanks,
    Avadhut

  • Programing Data Acquisition Card AT-DIO-32HS in LabView or ANSI C

    Hello,my name is Andreas an I work the first time with LabView. We bought the NI AT-DIO-32HS card. My problem: I have a rnadom-generator application, with two data-outputs , data1 is the random data, data2 is the shifting frequency from the shift register which shifts the random-data out, I must aquire the random data each time when a positive edge of the "shift-frequency" occures. Do you have some programing examples in LabView or in ANSI C to give me a first idea for the programing of these aquisition cards? E_mail: [email protected]

    Hi Andreasz,
    Welcome to LabVIEW!
    Any time I start working with a new device I start by searching the examples that ship with LabVIEW.
    Goto search examples. Take a look at the examples located in
    Hardware Input and Output >>> Solutions >>> 653x Logic Analyzer
    There you will find four example that will get you sarted.
    If you find these lacking, let us know what needs changed and we may be able to help.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Using calling program data

    Hi,
    There s a std transaction F.27(RFKORK00) which we need to run to get Customer Statement. in this program, it uses a SUBMIT ( SAP140 ) which in turn uses a submit ( RFKORD11 ). i m using a customised program in place of RFKORD11. in this program i want to use a variable from program RFKORK00(first program)....
    didnt find any syntax wherein i can pass any parameter from calling program to called program.
    i think Export/Import to/from ABAP memory will work...
    need ur inputs..wat r the diff ways we can do this n wat s the optimal method...
    all inputs appreciated.
    Thanks & Regards,
    Bikash

    HI
    GOOD
    I CAN GIVE YOU ONE SUGGESTION THAT YOU CAN DO THE CHANGES USING THE USER EXITS.
    HERE I AM GIVING THE USER EXITS OF BOTH THE PROGRAMS YOU CHECK OUT WITH THEM.
    RFKORK00=>
    F050S001     FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002     FIDCC1: Change IDoc/do not send
    F050S003     FIDCC2: Change IDoc/do not send
    F050S004     FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005     FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006     FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007     FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001     Balance Sheet Adjustment
    FARC0002     Additional Checks for Archiving MM Vendor Master Data
    THANKS
    MRUTYUN

  • Cannot print pdf close program data execution prevention

    when i try to print a pdf (acrobad standard 8) it closes program and gives me "data execution prevention" windows closed this program to protect ... how do i fix this?  this was not happeneing a couple weeks ago...

    I am having the same problem with Acrobat Reader X.
    I am using Adobe Reader X and am constantly getting a Windows "data execution prevention" error every time I open and close a pdf file. What can I do to resolve this as Windows says it can not shut off "data execution prevention" for Adobe reader?

Maybe you are looking for