Program ended with error or warning, return code: F
Friends, During client export i am facing below mention error, Pl suggest asap
Client export from 06.04.2011 18:00:44
System ID............................ PPT
R/3 Release.......................... 700
Basis Support Package...............SAPKB70018
Host................................. pptest
Start in background............. .....X
User................................. SUPER
Parameter
Source client........................ 500
Source client user masters............500
Copier profile:.......................SAP_ALL
Table selection
Command file......................... PPTKT00008
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0012
Error exporting request PPTKT00008 23:40:31
Program ended with error or warning, return code: F
Runtime (seconds) : 20,390
End of processing: 23:40:33
There could be three things possibly causing this error:
1. There is some database issues, that is the connection to the database maybe is lost that's why TP ends.
2. The TP return Code can also arise due to issues at the OS level, where SAP is installed.
3. Due to permission issues also this can creep in. By permission issues I mean there are not enough permissions, please use trace ST01 and run the process again.
Also please paste the Imort Log, as it can help in further analysis and with that please give your database and OS informations.
Similar Messages
-
Tp program ended with error code 0012
during export client from PRD to QAS i got the following error
3 ETA072 Exit program "CLIENTCOPY_SELECT_TEXTID_ALL" successfully executed "20:13:54"
2 ETA090 Command file for "tp" is written under: "PRDKT00029" "20:25:04"
2 ETA091 For client transport, " 55,612" entries entered in command file
2 ETA090 Command file for "tp" is written under: "PRDKX00029" "20:25:04"
2 ETA091 For client transport, " 419" entries entered in command file
2 ETA375 Transport program TP started successfully for "PRDKX00029" "20:25:05"
1 EXT200 Transport control program tp ended with error code "0012""A tool used by tp aborted""EXPORT PRDKT00029 client500 U18 pf=/usr/sap/tr
1 ETA377 Error exporting request "PRDKT00029" "20:54:04"
1 ETA146 Program ended with error or warning, return code: "F"
1 ETA027 Runtime (seconds) : " 2,455"
1 ETA152 End of processing: "20:54:04"
any can help me
ThanksHi Ehab,
Yes !..
ALOG and SLOG can help analyze the problem and provide you the possible solution...
Make sure that you are using updated KERNEL and TP program before exporting the client..
Regards.
Rajesh Narkhede -
hi alll....
I am on working on Oracle Audit trail for mtl_system_item_b (ie. whenever item is changed, created or deleted , i want to track the data, who delete that item and wat item). I followed the below steps to perform that.
Steps 1:
sysadmin ->Security : AuditTrail->install. I checked weather audit trail is enabled for oracle inventory (ie, in screen i query for inv under oracle username tab and checked weather enabled box is checked).
Steps 2:
Creation of Audit group
navigation : AuditTrail ->Groups.
Application Name: Oracle Inventory
Audit Group: XX inventory
Group State: Enabled
I added audit tables to this group
User Table Name: MTL_SYSTEM_ITEMS_B
Steps 3:
After creation of audit group i run the Concurrent program “*AuditTrail Update Tables*” . It has no parameter..
The request is ended with errored when i ran. Plz help me... Its urgent.
I checked with log file too. It has so many page. finally it displaying
fatal error in fdasql,quitting...
fatal error in fdacv,quitting...Hi,
Search the log file for more details about the error.
You may also review these documents and see if it helps.
Note: 353326.1 - Audittrail Update Tables : Fatal Error In Fdasql,Fdacv,Fdaupc When Create View
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=353326.1
Note: 563116.1 - AuditTrail Update Tables Program Fails with "Fatal error in fdasql, quitting..."
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=563116.1
Regards,
Hussein -
Dear All, I am running Creat Autoadjustments, but program ends with error.
Your kind help will be appreciated...
Oracle Receivables: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
ARXAAP module: AutoAdjustment
Current system time is 26-JUL-2012 09:44:17
Starting ARXAAP program
entering main
Current system time is 26-JUL-2012 09:44:17
Invoice Currency: BHD
Remaining Amount: 0 500
Remaining %:
Due Date:
Invoice Type:
Customer Name:
Customer Number: 043 043
Option: 0
Adjustment Type: CHARGES
Activity: 1062
GL Date: 2012/02/29 00:00:00
Adjust Related Invoices: N
Reason Code: CHARGES
validating gl_date
out of validating gl_date
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Finished executing request completion options.
AR-ARXAAP: ERROR from afpoget - Terminating Program
Concurrent request completed
Current system time is 26-JUL-2012 09:44:17
Edited by: Ramesh Ippili on 25/07/2012 11:42 م
Edited by: Ramesh Ippili on 25/07/2012 11:42 مPlease refer MOS note: Autoadjustment Process Fails With An ERROR From AFPOGET [ID 142549.1]
to fix this issue.
regards, -
Transport control program tp ended with error code 0008
Hi !
I trying to realize an export of client like that :
Source Client 400
Target System: ASI
Copy Type Client Export
Profile SAP_RECO
Status Ended with Errors
User ST01051
Start on 17.06.2009 / 17:41:00
Last Entry on 18.06.2009 / 00:20:40
Transport Requests
- Client-Specific ASIKT00028
- Texts ASIKX00028
The export ended with this error :
Transport control program tp ended with error code 0008
Error when exporting request ASIKT00028 00:20:39
Program ended with error or warning, return code: F
What happen ?
If somebody can help me to solve this problem ?
Regards,
Johanhai johan ,
of the return code is 008 then it is error,
what have u transported to target just chekc the log an du might find the error ,
just click the expand button of the error and u will get the detials what errror occured
may be some objects might be inactive just chekc once
m.a -
Transport control program tp ended with error code 0016
Hello colleagues,
We are getting the following error when exporting system HRP to HRI:
Transport program TP started successfully for HRPKX00005 21:25:45
| Transport control program tp ended with error code 0016
| Error exporting request HRPKT00005 00:59:50
| Program ended with error or warning, return code: F
| Runtime (seconds) : 13.876
| End of processing: 00:59:50
Please could you kindly help us to solve the issue?
Thanks in advance.
Best regards
Edited by: Víctor Barahona Cimas on Nov 12, 2009 3:33 PMok thanks
-
Client export SCC8 - ended with errors
Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloanHi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan -
Client Export ended with errors
Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloanIn Al11 what does DIR_TRANS pointing to?
Make sure you have enough space there as it will export the 2 files to the transport directory.
Have you tried Remote Client Copy.
Thanks
Adil -
Transport control program tp ended with error code 0211
Dear Experts,
I have a problem in doing the import after the client export was successfully done.
I am actaully tring to do a client import/export from the PRD server to DEV server.
On PRD the client is 900 and on the DEV the client is 240.
I have manually copied the transport requests created into the
/usr/sap/trans/cofiles and /usr/sap/trans/data folders to the same on the DEV server.
After coping them,
I have tried to add these transport requests to the DEV server queue, i get the following error message
Transport control program tp ended with error code 0211
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: ADDTOBUFFER RT2KT00014 RT1 pf=/usr/sap/trans/bin/T
Return code: 0211
Error text: no info about transport request found
Request: RT2KT00014
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
After this I have tried to add the transports to the buffer at the OS level using the command
./tp pf=TPPARAM addtobuffer "RT2KT00014" RT1 U18 by going to the folder
/usr/sap/trans/bin
But it says that the tp is not found.
I have also checked the permissions for the TRANS folder, it has full access i.e 777
This is where i am struck, and the client has to be imported asap as the requirement for the SUPPORT TEAM is very urgent.
We are on AIX, Oracle 10G and ECC6
Thanks and regards
HarryDear Imtiaz,
Thanks for your quick fire reply...
The link helped me but it could not resolve my issue..
Infact i found it my self that the transport requests had to be given full FILE PERMISSIONS at the OS level
I logged in as ROOT
and changed directory to /usr/sap/trans/cofile and gave the command
chmod 777 RT00014.RT2 and
chmod 777 RX00014.RT2
and then went to STMS>SYSTEMS>Import View>Extras>Other requests--> Add ..
Here i added the request nos and then it added up in the queue and then i started the import.
Anyway thank you very for your reply..
Awareded points to you.
Thanks and regards
Harry... -
Transport control program tp ended with error code 0232
Dear all
I've change password for user SAPSR3 by mistake
the result from brtools is "password changed successfully in table OPS$CAPADM.SAPUSER for user SAPSR3"
after that i can not transport to my production client
with error : TP_REPORTED_ERROR
Transport control program tp ended with error code 0232
Can anybody help me please
thanks & rgds,
DellaI've changed my SAPSR3 password to sap but still error
this is the error log from Check Transport Tool
DB Connect Link to database failed
This is tp version 372.04.70 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
ERROR: Connect to CAP failed (20091217174435, probably wrong environmen
TRACE-INFO: 1: [dev trc ,00000] Thu Dec 17 17:44:35 2009
0.007435
TRACE-INFO: 2: [dev trc ,00000] DlLoadLib() success: dlopen("/usr
0.007448
TRACE-INFO: 3: [dev trc ,00000] Got
LIBPATH=/usr/sap/CAP/DVEBMGS32/exe:/usr/sap/CAP/DVEBMGS32/exe:/usr/lib
lient from environment
TRACE-INFO: 4:
0.008053
TRACE-INFO: 5: [dev trc ,00000] Oracle Client Version: '10.2.0.2.
0.008140
TRACE-INFO: 6: [dev trc ,00000] >oci_initialize(con_hdl=0, char
0.008158
TRACE-INFO: 7: [dev trc ,00000] application info callback registe
0.008173
TRACE-INFO: 8: [dev trc ,00000] OCIEnvCreate(mode=16384=OCI_UTF16
0.010330
TRACE-INFO: 9: [dev trc ,00000] Client character set UTF16 -> UTF
0.010421
TRACE-INFO: 10: [dev trc ,00000] Client NLS setting (OCINlsGetInf -
Transport control program tp ended with error code 0249
Hello guys,
I am facing an when importing transport. After I click import to the transport in STMS, before it runs, a message window is displayed immediately. This was working find until last week, any kind of transport is followed by the same error.
Transport control program tp ended with error code 0249
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT BWDK903312 BIW client200 U0 pf=
sapbiw1a\s
Return code: 0249
Error text: connect failed due to DbSL load lib failure
Has anyone faced this error while trying to import a transport? I have not found the same error in sdn (0249)
help will be appreciated.
thanks
DGFYour are right, but which is the Basis forum?
Business Process Expert
Database & OS Platforms ABAP Development
Enterprise SOA Portal
Emerging Technologies
SAP Solutions
Business Intelligence
Scripting Languages
SAP Business One Industries
Community Discussions
SAP NetWeaver Application Server Integration and Certification Center (ICC) -
Transport control program tp ended with error code 0203
when i import queue and transport queue from dev to prd ,error show:
Transport control program tp ended with error code 0203
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT DEVK900298 P01 clientP01 U0 pf=/usr/sap/tra
Return code: 0203
Error text: wrong syntax in tp call
Request: DEVK900298
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.Dear Allen,
The transport control program tp collects all return codes that occur when a tp command is executed. From all of these single return codes, a combined return code is calculated that tp outputs as a result at the end the command. During an import, for example, all return codes for individual import steps are handled. If a special return code does not occur, then the combined return code at the end is the maximum of individual return codes that occur. In addition to the value of the return code, tp also gives a short description of this return code. You can display this short description using the command explainrc.
Normally, all return codes that occur originate from individual transport steps. Since these individual return codes can only have the following values 0, 4, 6, 8, 12, 13, 14, 16, the combined return code also has one of these values. However, if a general error occurs, a single return code over 200 is generated. For example, this could arise if tp cannot establish a connection to the database. The maximum return code for all single transport steps is output in a separate message before specifying the combined returned code. In this case, the combined return code is always the return code of the general error message.
<b>tp Commands:</b>
tp addtobuffer <request> <sapsid>
As of Release 4.6A, an explicit addtobuffer command leaves the position of the entry unchanged, if the relevant transport request is already in the buffer. Only the status of the entry is changed:
Unconditional modes appearing in the command line are added to the unconditional modes in the buffer.
All the steps of the entry are re-initialized.
If the entry found is not an initial entry, the import step for the command file is set to *4000 .
Before you call this command and its options, consider the effects of changing the import sequence.
tp cleanbuffer <sapsid>
This deletes successfully imported change requests from the list of requests that are marked for import into the SAP System <SAPSID>. This function is contained in the commands tp import all <sapsid> and tp put <sapsid> .
tp delfrombuffer <request> <sapsid>
If the specified request is marked for import into the specified SAP System, this flag is deleted from the import list.
Before you call this command, consider the effects of changing the import sequence.
As of Release 4.6A: If a transport request was only partially imported, you can delete this type of transport request from the buffer. However, if a deleted transport request is placed in the buffer (without having been initially or completely imported), the attributes of the old entry are reactivated. This means the return codes, the unconditional modes and tags of the deleted entry appear in the new entry.
tp delstopmark <sapsid>
If the list of requests marked for import into the specified SAP System contains a STOP mark, the mark is deleted.
tp export <request>
This exports the complete request from the source system. This command starts the export of a request from the operating system level. Only use this command in exceptional cases. The SAP System uses the command expwbo to release requests from CTS transactions.
tp reformatbuffer <sapsid> [options]
This automatically reformats the entire buffer.
As of Release 4.5A, there are 2 different formats for buffer entries. (As of Release 4.5A, tp can work with both formats, and with a puffer containing heterogeneous entries. As of Release 4.6A, tp can work with 3 formats.)
However, in certain cases entries with the old formatting have to be reformatted during the normal run of tp . In this case, the entire buffer is automatically reformatted.
If you use the options downtorelease and Iagree for command reformatbuffer , you can format the buffer so that its formatting is compatible with an older release:
Option downtorelease <Release>
The command reformatbuffer with this option formats the buffer so that the formatting corresponds to the one used in an old release. This is necessary if tp writes buffer entries to the buffer of another system, but uses a buffer format that the transport control programs does not understand in this system.
Since older formats cannot store the same amount of information as the newer ones, some information contained in the original buffer may not be stored in the unformatted buffer. This may lead to data loss.
To avoid data loss, the original buffer is stored. In addition, you have the following functions:
Displaying the unformatted buffer (using showbuffer <SID> )
Displaying the original buffer (using showbuffer buffer=<SID>SAV )
Accepting the unformatted buffer (using reformatbuffer and the option Iagree yes )
Resetting the changes (using reformatpuffer and the option Iagree no )
If you call reformatpuffer using downtorelease , tp displays in detail if information was lost by reformatting, and what that information was. tp also names the commands that is has to execute to accept or reject the changes.
If you use the option downtorelease , you must also specify the option Iagree with yes or no . You cannot use the transport system until you decide to accept or reject the changes.
Option Iagree
Here are the following values for this option:
yes ( true )
Accept the change made by tp reformatbuffer <SID> downtorelease <rel>
In this case, tp deleted the buffer semaphore file that was lifted for security reasons at the first call of reformatbuffer
no ( false )
Reject the change made by tp reformatbuffer <SID> downtorelease <rel> In this case, tp copies the backup of the original buffer back and deletes the buffer semaphore file that was lifted for security reasons at the first call of reformatbuffer
tp setstopmark <sapsid>
A special STOP mark is added to the list of requests registered for import into the specified SAP System. The commands tp import all <sapsid> and tp put <sapsid> only process the requests in front of this stop mark.
If there is no stop mark, it is automatically generated by the commands
tp import all <sapsid> and tp put <sapsid> .
When all the requests in front of the stop mark have been imported successfully, at the end of all the calls the related marks and the mark itself are deleted.
A STOP mark can only be placed at the end of the change requests that have already been marked. In addition, it can only be set if no other mark of the same kind already exists.
tp showparams <sapsid>
This tp function displays which values the individual parameters of the transport profile have for the current SAP System.
tp verse <request>
This creates versions of the objects in the specified request. This transport step is contained in command export .
As of Release 4.5A, more actions that prepare the export are performed in this step.
Thanks and Regards,
Naveen. -
Transport control program tp ended with error code 0212 | URGENT
Hi All,
We are trying to import requests in our PRD system. As soon as we select the request and try to import it , we get the error "Transport control program tp ended with error code 0212".
This is tp version 305.12.42 (release 46D) for ANY database
/usr/sap/trans/cofiles/K915883.<SID> for transport: <SID>K915883: Permissio
HALT 20070222114323
ERROR: /usr/sap/trans/cofiles/K915883.<SID> : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 6878
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0212
Output from tools called by tp:
This is R3trans version 6.05 (release 46D - 18.10.01 - 11:30:00).
R3trans finished (0000).
When i checked the transport tool and rfc destinations, everything was successful.
When i tried to do tp connect -
23> tp connect <SID> pf=/usr/sap/tran/bin/TP_DOMAIN_<SID>.PFL
This is tp version 305.12.42 (release 46D) for ANY database
E-/usr/sap/tran/bin/TP_DOMAIN_<SID>.PFL could not be opened.
EXIT
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0212
tp finished with return code: 212
meaning:
could not access file as supposed (see SLOG for more details)
We are having SAP 4.6C with DB -Oracle and OS HP-UX.
Please let me know whow to rectifiy the issue. The situation here is getting worse.
Regards,
NKHi Ruchit, Sorry for the delay. Here is the file you wanted -
steic25q:root>ls
DOMAIN.CFG TPPARAM.bak TP_DOMAIN_ID1.PFL TP_DOMAIN_IQ1.PFL
TMS_TEST.IS1 TPPRAMA0918 TP_DOMAIN_ID1.orig nik.dev_evt
TPPARAM TP_DOMAIN_ID1.BAK TP_DOMAIN_IP1.BAK
steic25q:root>more TP_DOMAIN_ID1.PFL
#TMS:0078:DOMAIN_ID1
Caution !
This file was generated by the Transport Management System.
Do not change this file using a text editor.
For more information, refer to the online documentation of the
Transaction STMS.
If this file was destroyed, it can be regenerated in the TMS.
To do this, log on to the domain controller (system ID1) and call
transaction STMS. In the System Overview, you can distribute the TMS
configuration. This regenerates the file.
STMS -> Overview -> Systems -> Extras -> Distribute TMS configugration
TRANSDIR = /usr/sap/trans
DU1/CTC = 1
DU1/DUMMY = 1
DU1/NBUFFORM = 1
DU1/TP_VERSION = 266
DU2/CTC = 1
DU2/DUMMY = 1
DU2/NBUFFORM = 1
DU2/TP_VERSION = 266
ID1/CTC = 0
ID1/DBHOST = steic24q
ID1/DBLIBPATH = /usr/sap/ID1/SYS/exe/run
ID1/DBNAME = ID1
ID1/DBSWPATH = /oracle/ID1/817_64
ID1/DBTYPE = ora
ID1/NBUFFORM = 1
ID1/TP_VERSION = 266
IP1/CTC = 0
IP1/DBHOST = steic25q
IP1/DBLIBPATH = /usr/sap/IP1/SYS/exe/run
IP1/DBNAME = IP1
IP1/DBSWPATH = /oracle/IP1/817_64
IP1/DBTYPE = ora
IP1/NBUFFORM = 1
IP1/TP_VERSION = 266
IQ1/CTC = 1
IQ1/DBHOST = cbnysap2
IQ1/DBLIBPATH = /usr/sap/IQ1/SYS/exe/run
IQ1/DBNAME = IQ1
IQ1/DBSWPATH = /oracle/IP1/817_64
IQ1/DBTYPE = ora
IQ1/NBUFFORM = 1
IQ1/TP_VERSION = 266
TRN/CTC = 1
TRN/DUMMY = 1
TRN/NBUFFORM = 1
TRN/TP_VERSION = 266
steic25q:root> -
Help with Transport control program tp ended with error code 0203
when i import queue and transport queue from dev to prd ,error show:
Transport control program tp ended with error code 0203
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT DEVK900298 P01 clientP01 U0 pf=/usr/sap/tra
Return code: 0203
Error text: wrong syntax in tp call
Request: DEVK900298
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.Thank you !
My DEV system TP profile parameters is :
TRANSDIR = /usr/sap/trans
DEV/CTC = 0
DEV/DBHOST = P550A
DEV/DBLIBPATH = /usr/sap/DEV/DVEBMGS01/exe
DEV/DBNAME = DEV
DEV/DBTYPE = ora
DEV/NBUFFORM = 1
DEV/TP_VERSION = 266
#System from Transport Domain DOMAIN_P01
#TMS:0002:DOMAIN_P01
P01/DUMMY = 1
P01/NBUFFORM = 1
P01/TP_VERSION = 266
P01/CTC = 1
My PRD system TP profile parameters is :
P01/CTC = 0
P01/DBHOST = XCPRD01
P01/DBLIBPATH = /usr/sap/P01/DVEBMGS01/exe
P01/DBNAME = P01
P01/DBTYPE = ora
P01/NBUFFORM = 1
P01/TP_VERSION = 266
#System from Transport Domain DOMAIN_DEV
#TMS:0009:DOMAIN_DEV
DEV/DUMMY = 1
DEV/NBUFFORM = 1
DEV/TP_VERSION = 266
DEV/CTC = 1 -
Transport control program ended with return code 208
hi all please give me the solution for the transport control program ended with return code 208
after the request releasedHi,
Please check the transport log at OS level. below is the path
/usr/sap/trans/log.
You can also check from SAP level. After the transport is import go log button in the STMS_IMPORT tcode >>> expand all the possible values... you can find the exact reason why the transport ended with error.
And also plesae check if nay entry exits in TRBAT table .
Thanks,
Phani.
Maybe you are looking for
-
Downloads per Second slower than normal
Hi, i've moved from profile ADSL MAX to ADSL 2+ however my downloads per second are average around 2-400kbs a sec, my download speed is just over 7mb and my downloads have been around 850kbs a sec. Any reason to why this is? I don't do much heavy dow
-
hi there! im really stuck on this and cant work it out i hope you guys can help! i have been trying to make a single shot or scene whatever you want to call it with multiple videos playing all at the same time in it but i want them all to have their
-
CS5 MPE - any benefit for SD editing?
I do ONLY home video SD editing to create family DVD output... NO hi-def and no h.264 codecs Since the nVidia 285 card is about $400 and a good ATI card w/1Gig (to use with Photoshop) is about $100... does anyone know if the new MPE module in CS5 wil
-
Live cycle 7 --how to insert a table ? any way ?
I posted this in another adobe subforum... I am trying to insert a table onto a form that I can link to a dataset of some kind. Is there anyway to do this in Live cycle 7 ? My company owns adobe acrobat 7---we are not purchasing 8. I heard there was
-
How to auto commit in pl/sql
Hello, I am calling a PL/SQL procedure from a JDeveloper program. My connection is an "auto-commit" connection, but still, the PL/SQL is not committed until the procedure returns. Is it possible to avoid this, so that every single statement in the PL