Program Error- cannot open file? Please help! I lost my whole project!

When I try to open an animation psd file, I keep getting a box that says my request could not be completed due to a program error. The file is 23.7 MB and I am using a PC.... I at least need to get the file open so i can export the animation.

I don't personally know how to repair such a file, but I can suggest a utility that will be able to fetch an uncorrupted backup copy if it is in Window's Shadow copy.
http://shadowexplorer.com/   It's a free and easy to use utility. I personally have it.
Gene

Similar Messages

  • Upgrade Plug-ins error (Cannot Open File)

    I was working on a document in CS3 as a final thesis for my masters work. I was using a Blurb template in order to export the file for printing. In between working on the file, one afternoon I could no longer open the file and was met with the follwing error:
    Cannot Open File
    IMAGE.RPLN
    IMAGE FILTERS.RPLN
    HYPERLINKS.RPLN
    "Cannot open "Masters_book dec.indd".
    Please upgrade your plug-ins to their latest
    versions, or upgrade to the latest version of
    Adobe InDesign."
    I hadn't changed any other files on my computer or ran any updates. I was simply met with the error when I tried launching the application. After trying to run necessary updates I was still met with the same error message. I downloaded the trial version of CS5 on another machine and tried to open it and was once again met with the above error message. I have a back up of the file that I can use but it still represents a lot of lost work if I have to resort to an old file.

    I probably shouldn't dwell, on this, but I can get really worked up over it.
    I come from the Cosmos and I can assure you we have sent no "Rays" to your puny Earth Planet today!(*)
    Since this concerns a CS3 file and I haven't seen posts of others having the same issue, either with CS3 or with any other version, I have to take it as a One-Time Fluke.
    I'm pretty firmly convinced this never happens. There are real problems and even if we only see them once, they are happening hundreds and thousands of times and going unreported and undetected, but they are no less real. In fact, because of the reporting bias towards repeatable problems, they are probably causing added frustration and confusion without being detected or fixed properly. So, IMNSHO, we owe a larger duty to pay attention to so-called "unreproducible" bugs.
    (You can imagine how well these conversations with Adobe Support go...)
    Of course, in this case, it's probably really hard to find the problem. And since it's effectively an end-of-life'd product that is 3 versions behind the released product and at least 4 versions behind the development product, well, it's hard to lose too much sleep over it.
    (*) Yes, I know, this incident would not have been "today." Consider it time dilation.

  • Documents backup failure in commvault with error Cannot open file ReportViewer.dwp

    Hi,
    SharePoint Documents backup failure in commvault with error "Cannot open file ReportViewer.dwp" even all necessary permissions are available for all the sites , sql

    Hi Praveen,
    Whether you tried to backup the library using PowerShell exporting command.
    Export sites, lists, or document libraries in SharePoint 2013:
    http://technet.microsoft.com/en-us/library/ee428301(v=office.15).aspx
    As the commvault is a third party tool and I am not familar with it, I suggest you ask the third party support or forum for help.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • I have a spelling app that is stuck on the screen - it doesn't have any way to close it out, and when I split the screen and go to "Finder" to remove it, it says that it can't, because the program is still open. Please help.

    I have a spelling app that is stuck on the screen - it doesn't have any way to close it out, and when I split the screen and go to "Finder" to remove it, it says that it can't, because the program is still open. Please help.

    Paul,
    I'm sure this is the correct answer, but just switched to Apple, so am just an apple seed at this point! :~)
    How do I get to the Apple Menu?
    Thanks!
    KL

  • In CS4, "Cannot open file" "Please upgrade your plug-ins..."

    Greetings,
    I am using InDesign CS4 on a PC. I am trying to open an .indd file created by our marketing department. I don't know what version of InDesign they use nor whether they work on Macs or PCs.
    When I double-click to open the file, I get a "Cannot Open File" popup box. The box reads "Cannot open docname.indd. Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign." It then lists 18 different plugins:
    ASSIGNMENTS.RPLN
    TEXT.RPLN
    SPREAD.RPLN
    MASTER PAGE.RPLN
    TEXT ATTRIBUTES.RPLN
    .... and 13 more.
    When I go to Help > Configure Plug-Ins, I can see that I do have all of these plug-ins. But apparently they are not the latest versions.
    Anyone know how I can update these plugins? I have searched for them on the Adobe website, but no joy.
    Thanks in advance.
    Jen

    It's a safe bet that they are working in CS5. The only way to get those plugins is to install CS5 on your machine.
    You could ask your marketing department to export an IDML file from CS5, which you can open up in CS4, but it might fail horribly (and it's guaranteed to lay out incorrectly if they've used any tools in CS5 that aren't in CS4). If you rely on this workflow, by regularly using a document going back and forth between CS5 and CS4, chances are very, very good that it will fail at a critical moment. The only really safe thing to do here is to get everyone using the same version of InDesign.

  • Execute ABAP Program - Error in Open File Cust_Dim.dat

    HI All,
    I am trying to Implement scenario of Data Service designer for Extract SAP Application data (page no. 181 Onwards). It is for transfer data from SAP ECC - KNA1 to MSSQL table.
    I have Data Service server install on my system.
    I have implement all the steps. When I execute job server. I am getting error like
    "Execute ABAP program <C:/Program Files/Business Objects/BusinessObjects Data Services/ZCUSTDIM_1.aba> error < Open File Error -- C:\Program Files\Business Objects\/Cust_Dim.dat>"
    Does anyone knows about this? I have tried to find lot in SDN but didn't find any solution.
    Thanks
    Ratnakar

    Hi all
    I was having the exact same problem as the one explained here.
    I was a little mixed up because I assigned full privileges on the destination folder to one specific account called installsap
    I used  this account for installing SAP BO Data Services. This account is the one configured on the Business Objects Data Services Service:
    However, I kept getting the same error, as if this account had not enough privileges over the folder.
    I saw that there is another Service called Server Intelligent Agent. I went through its configuration Properties by using the Central Configuration Manager, specifically within the Log On As Property and it seemed like a non specific System Account was configured there.
    Then I open the services.msc (Windows application) in order to see this very same service configuration and it had NOTHING specified there, nor a Local System Account nor an specific user account.
    So, I stopped the service and specified the installsap account I used for the Business Objects Data Services Service. After that I verified I could see this configuration through the Central Configuration Manager and now both tools showed the same.
    Then I started the SIA Service retried again executing the ABAP Data Flow and the Error in Open File was gone.
    It is how the SIA Service configuration looks like.
    By the way, I am not sure if the "Job Server Service" which was cited before in this thread is the same as the Server Intelligence Agent Service I modified
    Besides, although I've been using DS for quite a considerable amount of time, I have never heard of such "Job Server Service". Let me know if I am wrong.
    Anyways it worked for me and I hope it works for someone else who faces the same error.
    Best regards!

  • Cannot open file "Please upgrade your plug-ins" message

    I'm trying to open a CS3 InDesign file and all I get is this error message:
    "cannot open "filename". Please upgrade your plug-ins to their latest version, or upgrade to the latest version of Indesign. " followed by a long, long, list of plug-ins.
    I'm using InDesign CS3 5.0.4.682 on OSX 10.4.11

    Indeed. It uses the same .indd extension as all the InDesign releases. Since you don't have CS4, the Finder thinks it is a CS3 document. But it isn't.
    Dave

  • As a follow up from my recent question, I turned off the compatibility mode under all and regular, clicked out ok, ok then then went to itunes and played a song as they said to, and then tried to open the store and STILL CANNOT OPEN STORE, please Help!!!

    Turning off the compatibility mode by deselecting the check box under each thing that it wants did nothing for my access to the itunes store, still a white page with "itunes store" in the middle of it.  This is getting rediculous! Someone with computer smarts please help, I am at the end of my rope!

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Cannot put files please help!

    I have just switched to DW8 and changed computers to a Mac
    Pro. I've rebuilt the site I created on DWMX and now I am getting
    error messages when putting images (jpeg from photoshop) and flash
    texts created in DW8.
    This is the specific message for the image:
    error occurred - An FTP error occurred - cannot put
    inspire.html. Access Denied. The file may not exist, or there could
    be a permission problem.
    I didn't save the flash text error message.
    Suggestions?
    Thanks

    I found my answer...I had exceeded my space limits on my
    server.
    Deleted old bits and the images upload fine.
    No need for replies, but thanks anyway!

  • Opening links to .ai files on client sites returns error "cannot open file, unknown file type" but only of illustrator isn't already open

    It seem like illustrator won't allow us to link to files from a network drive without having it already open. This is a real pain for the team which is building a template library on an internal site. Any suggestions?

    Issue:
    Clients logging into File Services over SMB with OS X 10.9 experience hanging connection upon login attempt.
    Root Cause:
    OS X 10.9 now utilizes a new SMB2 stack written by Apple.   Apple's SMB2 implementation is not compatible with many other SMB2 NAS products on the market today while Windows 7, 8, and 8.1 works just fine.   In short, its an Apple bug.
    Workaround Option 1:
    To force your connection to be SMB1, simply type cifs://servername instead of smb://servername when connecting to a Windows or NAS share.  This is by far easier and requires no real configuration changes.
    Workaround Option 2:
    To force all connections to be SMB1:
    Open A terminal window
    paste in the following line followed by the return key(should be all on one line): 
    echo "[default]" >> ~/Library/Preferences/nsmb.conf; echo "smb_neg=smb1_only" >> ~/Library/Preferences/nsmb.conf
    What the command does:
    Creates a file called nsmb.conf  in your  home directory at the path ~/Library/Preferences/nsmb.conf.
    Adds directives to force SMB connections to use the SMB1 protocol.  This is slower but stable.
    How to remove the workaround:
    Open a terminal window
    paste in the following at the prompt and then hit the return button:
    rm ~/Library/Preferences/nsmb.conf
    Notes:
    Its a good idea to restart your mac before trying to connect to your storage again. This will clear any hung SMB processes from previous attempts to connect to your storage before implementing this workaround.

  • Why do I get Error FIL-080101: Cannot open file

    Hi,
    Most likely a user error, once again :(. I am using DS 12.2.0.0.
    This question is also posted in BoB [http://www.forumtopics.com/busobj/viewtopic.php?p=767673#767673].
    I have created a ERP SAP datastore and imported one function, which is a simple BAPI. It takes 3 simple char parameters and returns a BAPIRET2 table.
    I have a dataflow which contains:
    - An Excel source file with the input parameters
    - A query using the BAPI
    - A flat target file to contain the result
    I have checked the following:
    - wiki [https://wiki.sdn.sap.com:443/wiki/display/BOBJ/SharedDirectoryaccess]
       --> I checked my Services logon properties for Data Services. The logon is set to the Administrator and not to local
    - SAP Note 1388857 (Error: "Cannot open file <<path to pcache area and file name>>. Please check its path and permissions." - Data Services XI 3.2 (12.2))
      --> I have no problem executing other jobs and reading the files. I only have the issue that when using the ABAP data flow
    It is not clear to me which users is trying to access the files. The SAP user? The Job Server? If the job server, I don't understand why it has issues in this particular job when all others are fine.
    Help appreciated.
    Best Regards
    Isabelle
    Edited by: Isabelle Thore on Oct 28, 2010 7:58 AM
    Edited by: Isabelle Thore on Oct 28, 2010 8:02 AM

    Hi Isabelle:
       Please refer to SAP Note 1388857 - Error: "Cannot open file <<path to pcache area and file name>>. Please check its path and permissions." - Data Services XI 3.2 (12.2)
    Regards,
    Francisco Milán.

  • Error Message "cannot open file" is there a fix?

    I have created a flash file, Flash crashed and then came with an error "cannot open file"  Is there a fix?  Back-up was done prior to completion of the file.
    Any assistance would be apreciated,
    Thanks

    Do you have the .swf file available still ?

  • Error Message #100 Cannot open file

    When double-clicking on an MDF file, I'm getting the following error:
    Cannot open file 'Y:\shared\Lending\CFP.ifd'
    Any idea what is causing this? This CFP.ifd file isn't even the file I'm trying to open, and as far as I know it doesn't exist. I'm able to open the MDF file with FILE>OPEN with no errors.

    Hi,
    New release of InDesign CC is not an update of older InDesign. It can coexist with older InDesign CC. It would be available in creative cloud app as a separate installer named InDesign CC (2014).
    Regards
    -Anshul

  • Cannot open file E:/DataLoader/ecdcs01.cprod.corp.ntgov/migration/BOXI_DS/

    Hi All,
    I am attempting to read data from SAP so that we can ensure duplicates are not loaded.
    The data store DS_SAP is defined and I can connect to SAP.
    The table is defined in the data store and I can view the data manually,
    The transfer method defined in the store in for a Shared Directory.
    ecdcs01.cprod.corp.ntgov/migration/boxi_ds
    ABAP Data Flow works with the file created on the SAP Application Server.
    Job server has permissions set to read from the shared directory
    However when I execute the job I get the following error:
    Cannot open file <E:/DataLoader/ecdcs01.cprod.corp.ntgov/migration/BOXI_DS/CharacteristicsBasicData_Existing.dat>
    *Why is the job changing the UNC path to a directory path?*
    I have changed the transfer method, compresed the local repository, changed it back to shared directory and re executed the job.
    Same Result
    Next exported the data store as an ATL, deleted the data store in the local repository and compressed it again.  Exited the designer, openned the designer and imported the data store ATL, after checking that no string "E:/DataLoader" existed.  Re executed the job.  Same error message.

    Hi Paul,
    Thanks for the reply.
    The SAP ECC6 server is running on Windows 2008, and so is the Business Objects Data Services job server.
    SAP Server ecdcs01.cprod.corp.ntgov
    SAP SID: ECD
    SAP SNO: 01
    The Working Directory:
    ecdcs01.cprod.corp.ntgov\migration\BOXI_DS
    Application Path to shared Directory:
    ecdcs01.cprod.corp.ntgov\migration\BOXI_DS
    Checked the job server has access to the directory and file on the SAP server.
    Created a mapped drive on the Business Objects Server to check that the ABAPFlow was creating the file.
    Tried changing the Application Path to the Mapped Drive S:\
    Ended up with the message
    E:/DataLoader/s/

  • Plugin development for premiere, adobe example  error LNK1104: cannot open file 'C:\Program Files\Ad

    Hello,
    I downloaded the Premiere Pro CS 5.5 Win SDK, i open the project SDK_Exporter in Visual Studio 2008, when i hit debug i get the following error
    Error
    1
    fatal error LNK1104: cannot open file 'C:\Program Files\Adobe\Common\Plug-ins\CS6\MediaCore\ExporterSDK.prm'
    How can i resolve ?

    RESOLVED LOOKING AT THE PAST
    1.Zac Lam,01-dic-2013 10:43   in reply to Alex B MartinReport 
    Hi Alex, Are you launching Visual Studio with administrative privileges?  If not, you won’t be able to generate the .aex in certain protected folders because of a Windows security restriction.
    Was this helpful? Yes   No
    Reply 
    |Mark as:
    Unmark as Correct 
    |Translate
    7 posts
    03-ene-2013 
    2.Alex B Martin,01-dic-2013 12:34   in reply to Zac Lam 
    Yes it works, thanks Note: For CS 5.5 Administrative privileges are not need, so thats only with visual studio 2010 and premiere cs6 where i need to run vs2010 as admin.

Maybe you are looking for