Program Error in new install w/FontAgent Pro

Just built a new Leopard 10.5.4 system on my new 2008 Mac Pro 8 core, got my CS3 apps installed & activated. Opened up my first file in Photoshop, fooled around a bit & closed it. Everything fine, but the file needed a font that was not installed. So I opened FontAgent Pro & installed the CS3 plugin, reopened Photoshop to see if it would load my font automatically. FAP tried to load the font, but was cut off by the Program Error dialog. Tried a couple more times to open this file, no dice. This is a brand new Mac, virgin Leopard install, 10 GB RAM, no reason I can see for this error. Your suggestions would be most welcome.

Gary,
Just out of curiosity I looked at my Photoshop CS3 Plugin folder and found two FontAgent plugins: FontAgent Pro.plugin and FontAgent Pro Helper.plugin. As my auto activation works without issue I wondered if you had both plugins installed?

Similar Messages

  • Cannot update new install of Acrobat Pro 9

    After installing a trial version of CS5.5 Master collection (which included Acrobat 10), my purchased Acrobat 9 Pro was removed (or otherwise hidden) from my machine. After evaluating the different software choices in the master collection, I uninstalled the entire suite and installed my newly purchased production pro suite. Since production pro does not include Acrobat, I re-installed my purchased copy of Acrobat 9 Pro. Since it was installed from the installation DVD, updates are necessary. Everytime I try to update Acrobat 9 pro, I get the following error: "Adobe Updater Install Manager has stopped working". Also, everytime I open my outlook 2010 client, it crashes and recommends that I disable the pdf plug in from Adobe (which I have now disabled). I've looked over the internet and could not find a solution to the problem. I am using Windows 7 Home Premium. Any help would be greatly appreciated.
    Thanks,
    Patrick

    Good day Patrick,
    I'm sorry to hear you're having trouble.  Please give the following steps a try after a fresh restart of your system:
    Repair your current Acrobat 9 installation via Help > Repair Acrobat Installation
    Try to update Acrobat via Help > Check for Updates.
    If the update fails, try to manually apply the Acrobat 9.1 update via direct download here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4375
    Assuming the Acrobat 9.1 update successfully installs, please try continuing to update Acrobat all the way to 9.5 via Help > Check for Updates. 
    Please let me know how it goes and if the issue with Outlook clears up too.
    Kind regards,
    David
    Adobe Systems

  • Validation Errors with new Install of W7 x64 Ent Debug Checker On New Equipment

    I am receiving multiple Errors. I am trying to use the Windows 7 x64 Enterprise which happens to be the Debug Checker version OS as the host machine.  I have only built the machine, and tried to load the Drivers.
    I say this due to the starting issue that upon the loading of the entire driver set, (for the MB, Seagate Harddrive, and Vid Card), I would get the BSOD.  I identified that the Bluetooth driver was the issue.  I then did not load the Bluetooth
    drivers for the MB on the 5<sup>th</sup> or so install of the 7 Ent os.  (Tried Server 2k8 r2. Which is not compatible with the MB Drivers.)
    I have not received a single Update either.  The Auto update feature claims that I am up to date.  I do not believe this due to the fact that any fresh Install of any OS has about several decades of updates and reboots to go through.
    Upon trying the suggestions on the forum about turning off the IE Addons, the errors remain.  Also the results of the sfc /scannow are copied below.
    My Questions
    I am seeking assistance on solving the Errors that have refused to leave me alone , to put it humorously and am asking for your insight and wisdom.  Will you take a look??
    Do I need to go to Win 7 Ent or Ult x64 that is not a Debug Checker version.
    Are there other Microsoft download Registery file checkers besides the MGA Diag tool that are freeware that I can use to check, for corrupted registry files.
    Or do I just need to take it to the stores (Fry’s and Microcenter) that recommended the equipment and have them just reload the software and allow them the headache of solving the error issue, by paying them to install the drivers and have ALL of the
    drivers work. (including the blue tooth)
    The Goal is to turn it into a Active Directory Server using Virtual Box with Server 2k8 R2 running in the virtual box environment.
    Errors and Results.
    There are also a number of logs that show various Crit, Error, and Warning logs.  I will include those if need be.
    This is the majority of the error messages, and I have missed the opportunity to capture others.
    Internet explorer encountered Validation errors:
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0000000000B221DB
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : comctl32.dl
    iii.     
    Assert offset: 00133A2A
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 008BE823
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0040F9E8
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : iertutil.dll
    iii.     
    Assert offset: 001DEC51
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 00014159
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0000000000B221DB
    Microsoft Management Console Encountered a Validation Error
    Validation Error
    i.     
    Process Name: mmc.exe
    ii.     
    Module Name : ieframe.dll
    iii.     
    Assert offset: 00000000006C9283
    Scripted Diagnostics Native Hot encountered a Validation Error
    Validation Error
    i.     
    Process Name: sdiagnhost.exe
    ii.     
    Module Name : urlmon.dll
    iii.     
    Assert offset: 00000000001A0A73
    Validation Error
    i.     
    Process Name: sdiagnhost.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 0000000000017f32
    Windows System Assessment Tool encountered a validation error
    Validation Error
    i.     
    Process Name: winsat.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 0000000000017F32
    Windows Explorer Encountered a validation Error
    Validation Error
    i.     
    Process Name: Explored.exe
    ii.     
    Module Name : thumbcache.dll
    iii.     
    Assert offset: 00000000000300BE
    AI Suite 2 encountered a validation error
    Validation Error
    i.     
    Process Name: AI Suite 2.exe
    ii.     
    Module Name : ntdll.dll
    iii.     
    Assert offset: 000686BD
    the number “2” is the substitutedfor the roman numeral 2
    I believe that this is part of the MB Suite.
    My the environment is a new equipment, and Downloaded student software. Windows 7 Enterprise SPK 1 Debug Checker, Valid Key with the software download.  Activated on 8-12-2012
    Motherboard: Asus p9x79 Deluxe, Part number: 90-mibh50-g0aay0kz
    Chip Set: bx80619i73930k
    2x Memory: cmx16gx3m2a1600c11 Corsair
    Video Card: Diamond R7870 2GB DD OC 2xDVI/HDMI/2xDisplayport memory Clock 1250 MHz
    Hard Drive: 9jb1n3-574 (leave the last two didgets off when searching in the browser) This is a Seagate 2TB
    Generic optic drive: SH-222bb/bebe Samsung
    Here is the Microsoft Fix It error code
    Assertion Failed!
    Program:…
    File: d:\w7rtm\ds\security\cryptoapi\pki\...\newstor.cpp
    Line: 2131
    Expression: pStore->dwState = = STORE_STATE_OPEN || pStore->dwState = = STORE_STATE_OPENING || pStore->dwState = = STORE_STATE_DEFER_CLOSING || pStore->dwState = = STORE_STATE_NULL
    For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts
    (Press Retry to debug the application – JIT must be enabled)
                    Abort    Retry     Ignore
    Abort
    Closes the program
    Retry
    Repeats the error
    Verbatim
    Ignore
    Closes the program
    Nothing happens
    Here is the Microsoft Genuine Advantage Diagnostic Report
    Diagnostic Report (1.9.0027.0):
    Windows Validation Data-->
    Validation Code: 0
    Cached Online Validation Code: N/A, hr = 0xc004f012
    Windows Product Key: *****-*****-*****-*****-8C7YB
    Windows Product Key Hash: cezvXJ2/mUhIEFxJfWkZ3IN8EQQ=
    Windows Product ID: 55041-146-2397786-86942
    Windows Product ID Type: 6
    Windows License Type: Volume MAK
    Windows OS version: 6.1.7601.2.00010100.1.0.004
    ID: {EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}(1)
    Is Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/A, hr = 0x80070002
    Signed By: N/A, hr = 0x80070002
    Product Name: Windows 7 Enterprise
    Architecture: 0x00000009
    Build lab: 7601.win7sp1_rtm.101119-1850
    TTS Error:
    Validation Diagnostic:
    Resolution Status: N/A
    Vista WgaER Data-->
    ThreatID(s): N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    Windows XP Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    File Exists: No
    Version: N/A, hr = 0x80070002
    WgaTray.exe Signed By: N/A, hr = 0x80070002
    WgaLogon.dll Signed By: N/A, hr = 0x80070002
    OGA Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    OGAExec.exe Signed By: N/A, hr = 0x80070002
    OGAAddin.dll Signed By: N/A, hr = 0x80070002
    OGA Data-->
    Office Status: 109 N/A
    OGA Version: N/A, 0x80070002
    Signed By: N/A, hr = 0x80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
    Browser Data-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default Browser: c:\Program Files (x86)\Internet Explorer\iexplore.exe
    Download signed ActiveX controls: Prompt
    Download unsigned ActiveX controls: Disabled
    Run ActiveX controls and plug-ins: Allowed
    Initialize and script ActiveX controls not marked as safe: Disabled
    Allow scripting of Internet Explorer Webbrowser control: Disabled
    Active scripting: Allowed
    Script ActiveX controls marked as safe for scripting: Allowed
    File Scan Data-->
    File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
    Other data-->
    Office Details: <GenuineResults><MachineData><UGUID>{EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-146-2397786-86942</PID><PIDType>6</PIDType><SID>S-1-5-21-4234423899-2489109333-1931045272</SID><SYSTEM><Manufacturer>System
    manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>1103</Version><SMBIOSVersion major="2" minor="7"/><Date>20120409000000.000000+000</Date></BIOS><HWID>CFBA3607018400F2</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
    Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults> 
    Spsys.log Content: 0x80070002
    Licensing Data-->
    Software licensing service version: 6.1.7601.17514
    Name: Windows(R) 7, Enterprise edition
    Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
    Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
    Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 55041-00172-146-239778-03-1033-7601.0000-2252012
    Installation ID: 000792957432055771547065313840421702569731971164600080
    Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial Product Key: 8C7YB
    License Status: Licensed
    Remaining Windows rearm count: 5
    Trusted time: 8/12/2012 5:47:25 PM
    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: N/A
    HealthStatus: 0x0000000000000000
    Event Time Stamp: N/A
    ActiveX: Not Registered - 0x80040154
    Admin Service: Not Registered - 0x80040154
    HealthStatus Bitmask Output:
    HWID Data-->
    HWID Hash Current: OAAAAAEAAgABAAEAAgACAAAABAABAAEAHKJu3XDSdMRkx4ieoGkwung0ipvkrmTRDIsORc6qNCE=
    OEM Activation 1.0 Data-->
    N/A
    OEM Activation 2.0 Data-->
    BIOS valid for OA 2.0: yes, but no SLIC table
    Windows marker version: N/A
    OEMID and OEMTableID Consistent: N/A
    BIOS Information:
      ACPI Table Name           OEMID Value     OEMTableID Value
      APIC                                    ALASKA                               
    A M I
      FACP                                   ALASKA                               
    A M I
      HPET                                    ALASKA                               
    A M I
      MCFG                                 ALASKA                               
    OEMMCFG.
      SSDT                                    AMICPU                              
    PROC
    Scan Now Results
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Windows\system32>sfc /scannow
    Beginning system scan.  This process will take some time.
    Beginning verification phase of system scan.
    Verification 100% complete.
    Windows Resource Protection did not find any integrity violations.
    C:\Windows\system32>

    Thank you for your valuable time.
    I have performed the Chkdsk and the memory Diagnostic tool as per the suggestions.
    The Memory Tool did not find anything amiss.
    As per another thread I am going to try flashing the bios as well with the updates.
    Following are the Chkdsk results.
    Are there any other suggestions?
    Chkdsk Results
    Checking file system on C:
    The type of the file system is NTFS.
    A disk check has been scheduled.
    Windows will now check the disk.                        
    CHKDSK is verifying files (stage 1 of 5)...
      89600 file records processed.                               
              File verification completed.
      221 large file records processed.                                     
    0 bad file records processed.                                       
    1596 EA records processed.                                             
    44 reparse records processed.                                      
    CHKDSK is verifying indexes (stage 2 of 5)...
      131874 index entries processed.                                        
    Index verification completed.
      0 unindexed files scanned.                                           0
    unindexed files recovered.                                       CHKDSK
    is verifying security descriptors (stage 3 of 5)...
      89600 file SDs/SIDs processed.                                        
    Cleaning up 36 unused index entries from index $SII of file 0x9.
    Cleaning up 36 unused index entries from index $SDH of file 0x9.
    Cleaning up 36 unused security descriptors.
    Security descriptor verification completed.
      21138 data files processed.                                           
    CHKDSK is verifying Usn Journal...
      36120296 USN bytes processed.                                            
    Usn Journal verification completed.
    CHKDSK is verifying file data (stage 4 of 5)...
      89584 files processed.                                                
    File data verification completed.
    CHKDSK is verifying free space (stage 5 of 5)...
      476262075 free clusters processed.                                        
    Free space verification is complete.
    Windows has checked the file system and found no problems.
    1953410047 KB total disk space.
      48065140 KB in 61610 files.
         43468 KB in 21139 indexes.
             0 KB in bad sectors.
        253139 KB in use by the system.
         65536 KB occupied by the log file.
    1905048300 KB available on disk.
          4096 bytes in each allocation unit.
     488352511 total allocation units on disk.
     476262075 allocation units available on disk.
    Internal Info:
    00 5e 01 00 ef 42 01 00 ef 95 02 00 00 00 00 00  .^...B..........
    e3 00 00 00 2c 00 00 00 00 00 00 00 00 00 00 00  ....,...........
    6d 00 75 00 69 00 00 00 00 00 00 00 00 00 00 00  m.u.i...........
    Windows has finished checking your disk.
    Please wait while your computer restarts.

  • Error 16 when installing Acrobat XI Pro

    I recently purchased Adobe Acrobat XI Pro for Palomar Audubon use. While installing on a PC running Windows 8.1 I received an "error 16" message instructing me to uninstall/reinstall the program. Since then I have been informed that 1.) the entered serial number (<Serial Number removed by moderator >) is invalid and 2.) I need to uninstall and reinstall the program. At my wits end I ask that SOMEBODY can solve this dilemma for me. Let me know at: < Email ID Removed by Moderator >Although I have previously been very pleased with available donations through TechSoup I am gradually becoming more and more disheartened by this installation problem?
    Now another message:
    Acrobat failed to connect to a DDE server.

    Thanks for offering to remove Allen Rippe:
    [email protected]<mailto:[email protected]>
    From the Acrobat forum,
    (the sooner, the better.)
    Thanks again,
    Allen Rippe
    Sent from my iPhone

  • Input / Output error for new HDD on MacBook Pro 5.5

    Hi there,
    New to Apple Support Communities
    I have a problem with a MacBook Pro 5.5 Intel Core 2 Duo
    Original Fujitsu 160GB HDD crashed and I replaced it with a Hitachi 250GB HDD.
    Hitachi 250GB drive is partitioned to GUID Partition Scheme but when I try to format the drive in Disk Utility to Mac OS X Extended Journaled, I keep receiving an Input / Output error. I tried even erasing the drive and I get the same error.
    I also tried using Diskutil in terminal window and I get Input / Output error.
    I talked with a guy in work who knows about the Mac and he said the drive could be locked in which the Mac can't unlock to format the drive.
    There is nothing wrong with the drive at all. It works perfect. I'm at a loss as to why the Mac won't install the OS X 10.5.7
    I've looked at many Mac support sites for problems / solution but no solution
    Could someone who has experienced this before please help to resolve my problem.
    Regards,
    DTreacy

    Hi there,
    An update on the MacBook Pro 5.5 problem.
    Mac OS X seems to only install when the HDD is connected to the laptop as a USB drive.
    When I put the drive back into the laptop, it won't boot to the OS.
    The mount is /volume/Macintosh_HD.
    I even tried reformatting the drive but got an error that it could not unmount the drive. I tried a force unmount which worked but the drive disappeared from the disk utility.
    My only way to get the drive back was to connect it again as a USB drive and again I was able to install the OS again.
    Can some help to resolve the problem. How can I make the drive boot to the OS when it is connected as an internal drive
    Regards,
    Dtreacy

  • [SOLVED] Disk full errors on new install despite disk not being full

    Hi,
    I just installed Arch on my Thinkpad laptop as a way of trying out the distro. I followed the Beginner's Guide quite closely and used the latest install medium. My system is up to date.
    However, I did diverge a bit from the beaten path, as I re-used an old LVM-on-LUKS setup from the previous installation (Debian). It took a while to figure out how to make it work, but I managed and yesterday the machine seemed to run fine. Basically, my modifications to the default setup is adding encrypt and lvm to hooks in mkinitcpio.conf, and adding a kernel command line to decrypt my LUKS device containing the LVM volume to /etc/defaults/grub (this was tricky to figure out, by the way, since all documentation I could find spoke of the now-deprecated rc.conf). All that seems to work fine; the computer now boots and mounts root as expected.
    However, today when I started the laptop, I noticed that the password dialog in GDM wouldn't load. When I looked into the logs, I found that I had mostly the same problems as described in this thread, but the strange thing is that I'm not low on disk space:
    deanna% df
    Filesystem 1K-blocks Used Available Use% Mounted on
    rootfs 303565176 17339120 270805848 7% /
    dev 953648 0 953648 0% /dev
    run 957312 488 956824 1% /run
    /dev/mapper/deanna-root 303565176 17339120 270805848 7% /
    tmpfs 957312 96 957216 1% /dev/shm
    tmpfs 957312 0 957312 0% /sys/fs/cgroup
    tmpfs 957312 212 957100 1% /tmp
    /dev/sda1 240972 34562 193969 16% /boot
    So I thought I'd run into some bug, but then it turned out that systemctl scripts started complaining about lack of disk space, and then I got concerned:
    deanna% sudo systemctl start gdm.service
    Error: No space left on device
    deanna% sudo systemctl status gdm.service
    gdm.service - GNOME Display Manager
    Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
    Active: active (running) since Thu, 2012-12-20 11:17:03 CET; 41s ago
    Main PID: 1964 (gdm-binary)
    CGroup: name=systemd:/system/gdm.service
    ├─1964 /usr/sbin/gdm-binary
    ├─1968 /usr/lib/gdm/gdm-simple-slave --display-id /org/gnome/DisplayManager/Displays/_0
    ├─1971 /usr/bin/Xorg :0 -background none -verbose -auth /var/run/gdm/auth-for-gdm-ZOCjk8/database -seat se...
    ├─1981 gdm-session-worker [pam/gdm-launch-environment]
    └─2051 gdm-session-worker [pam/gdm-password]
    Dec 20 11:17:03 deanna systemd[1]: Starting GNOME Display Manager...
    Dec 20 11:17:03 deanna systemd[1]: Started GNOME Display Manager.
    Dec 20 11:17:04 deanna gdm-simple-slave[1968]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
    Dec 20 11:17:17 deanna gdm-password][2051]: AccountsService-WARNING: Failed to monitor logind session changes: No spac...device
    deanna%
    Any help debugging would be greatly appreciated. Also, I may have missed something since I'm new to Arch. Not a new GNU/Linux user however, so you'd think I'd not manage to blow everything up.
    Last edited by albins (2012-12-28 13:56:30)

    No:
    deanna% df -h
    Filesystem Size Used Avail Use% Mounted on
    rootfs 290G 17G 259G 7% /
    dev 932M 0 932M 0% /dev
    run 935M 516K 935M 1% /run
    /dev/mapper/deanna-root 290G 17G 259G 7% /
    tmpfs 935M 76K 935M 1% /dev/shm
    tmpfs 935M 0 935M 0% /sys/fs/cgroup
    tmpfs 935M 216K 935M 1% /tmp
    /dev/sda1 236M 34M 190M 16% /boot
    Also, I just dd:d up a 1.5 GB file from /dev/zero into my home directory without any problems.
    Last edited by albins (2012-12-21 08:48:35)

  • Error 1603 when installing Acrobat XI Pro - no luck with any suggestions

    Hi all - I have been trying to download Acrobat XI Pro via the Creative Cloud installer, but I'm getting the following message:
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message:
    ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
    I have successfully installed Photoshop and InDesign in the same way.  I have tried the following suggestions from the Community:
    Empty Temp folder
    Re-register msiexec
    Uninstall/Cleanup Tool/Reinstall
    It gets to about 42% and fails every time. Any ideas?
    many thanks!

    Thanks Ned.  I had already tried those suggestions.  Our IT Ops Manager finally sorted this out by running the installer manually, rather than through the Creative Cloud installer.  It was 'Adobe PDF Creation Add-On 11.0.01', which was not removed via the Cleaner Tool.

  • EXCHANGE 2013 - ECP AND OWA INTERNAL ERROR 500 - NEW INSTALL

    Really hoping someone can help me here.
    I first installed 2012 OS and 2013 exchange and users were getting 'Unable to open your default folder' when trying to open outlook. After much googling and nothing working I decided to put 2008 R2 on the server with 2013 Exchange. Now i am running into massive
    issues. 
    Firstly i get Internal Errror 500 after putting in credentials for ECP and OWA. I did notice that it is also defaulting straight to this URL after entering password https://localhost/owa/auth.owa
    I check the management shell and that connects without any issues. I also logged on to a computer to see what it did. After autodiscover it is not able to log onto server and then it looks like it is look for the old server information from previous server.
    Any help would be appreciated. Can i do another reinstall of OS and how am i meant to remove the previous data that it seems the server has found?

    Hi,
    According to your description, I understand that cannot login internal ECP\OWA with error 500, also autodiscover failed.
    If I misunderstand your concern, please do not hesitate to let me know.
    I notice that autodiscover “looks like it is look for the old server information from previous server”, have you installed multiple version Exchange in your environment?
    Please run below command to double check the virtual directory configuration:
    Get-OutlookAnywhere | FL Identity,*Host*,*Auth*
    Get-OwaVirtualDirectory | FL Identity,*url*,*auth*
    Get-EcpVirtualDirectory | FL Identity,*url*,*auth*
    Get-WebServicesVirtualDirectory | FL Identity,*url*,*auth*
    Get-ClientAccessServer | FL Identity,*URI*,*auth*
    Then, open IIS and check on the Application Pools to view whether MSExchangeOWAAppPool and MSExchangeECPAppPool is running on .NET Framework v4.0, and recycle virtual directory for test.
    Additional, here’s a thread about “Removing Old Exchange and installing a new one”, for your reference:
    https://social.technet.microsoft.com/forums/exchange/en-US/46ca107c-7ece-4da7-8aea-46b705793f37/removing-old-exchange-and-installing-a-new-one
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

  • Errors Opening and Installing Adobe Acrobat Pro

    Originally mine was a single problem with the following error after attempting to open Adobe Acrobat Pro 7.0, "An error has been detected with a required application library and the product cannot continue. Please reinstall the application."
    Now after reading the Adobe Community Forum article which recommended a complete uninstall of my Adobe Acrobat Pro 7 using this tool 'acrobat_ittools_cleaner_p1_040612' I have an additional problem with the following error,
    "Error 1310.Error writing to file: C:\Program Files(x86)\Adobe\Acrobat 7.02\ActiveX\AcroPDF.dll
    Verify that you have access to tha directory."
    Whereas previously I was able to reinstall the program successfully after an 'uninstall', now I encounter this error and cannot remedy it.
    Please note that I have performed all of the solutions offered in this url: http://helpx.adobe.com/creative-suite/kb/error-1310-error-writing-file.html#main_Vista to no avail. The problem persists.
    Therefore, my hope is that after having used the tool 'acrobat_ittools_cleaner_p1_040612' and then successfully reinstalling Adobe Acrobat 7.0 Professional, I will find that the original problem has also been fixed.
    Again, the original problem was this error:
    "An error has been detected with a required application library and the product cannot continue. Please reinstall the application."
    And the additional problem which came about after having used the tool is this:
    "Error 1310.Error writing to file: C:\Program Files(x86)\Adobe\Acrobat 7.02\ActiveX\AcroPDF.dll
    Verify that you have access to tha directory."
    Has anyone ever encountered either or both of these issues? If so, please share your experience and what you did to fix the problem(s).
    Thank you,
    -Dan Sacapano

    Okay I have a issue when I am working on a adobe acrobatXI standard file i get a error message
    what is going on??
    Problem signature:
      Problem Event Name:    BEX
      Application Name:    Acrobat.exe
      Application Version:    11.0.0.379
      Application Timestamp:    505fd1ce
      Fault Module Name:    StackHash_1d32
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Offset:    dfe2202f
      Exception Code:    c0000005
      Exception Data:    00000008
      OS Version:    6.1.7601.2.1.0.768.3
      Locale ID:    3081
      Additional Information 1:    1d32
      Additional Information 2:    1d32409995138d855a2b9bb446ccc159
      Additional Information 3:    591c
      Additional Information 4:    591c8f267d7c87f1375dd28c7ce78903
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

  • -10810 Error on new Mid 2009 MacBook Pro

    I posted this response regarding the -10810 error that I am getting in another thread (see below), but I thought I would post it here too since I'm not sure if this is hardware related. Is anyone else experiencing this?
    http://discussions.apple.com/thread.jspa?threadID=2017744
    I get the -10810 error after about 5 or so minutes. No application will launch and i will need to log out and then back in. I tried the suggestion of resetting the launch services and that did not make a difference. I will run the disk utility tonight and see what happens.
    I just got my mid 2009 17" MBP last week and ran the migration assistant on the initial boot to grab my files from my G4 Powerbook. I'm wondering if this may be the root cause? I did not have the Migration Assistant copy any applications from my G4, but I did have it do my documents and my network settings. Everything seemed to be fine for a few days and then all of a sudden I started getting the issue. I was just wondering if the PPC to Intel migration might have something to do with it.
    A couple applications that I did install and run for the 1st time on the new MBP "about" the same time as I started noticing the issue is XMarks and Handbrake. I uninstalled XMarks and Handbrake last night and shut down but have not rebooted yet. I dont know if that could be the cause either. I have been using Handbrake for a couple years and never had any issues on my G4. I thought I would try and work my way backwards.
    Thanks for any help or advice
    Craig

    Just an update. I did a complete fresh re-install from the disks that came with my MBP. I wiped out everything just as it came from the factory. Copied all my files over manually and so far so good. No errors! I'm thinking it had to be something that was brought over from my Powerbook G4 when I used the Migration Assistant. I have seen many posts (now that I am looking) that say to not use the Migration Assistant when copying from an old OS to a new OS (eg., Tiger to Leopard) like I had done. I dont know if this is always the case, but it seems to be in mine.

  • I have bought Canon EOS 70 D and have Photoshop Elements 12. The program has RAW 8.0. I need 8.2. I have tryed help - update and it is searching hour after hour. Nothing happens. The program i  brand new, Installed yesterday

    I have bought Canon EOS 70 D and have Photoshop Elements 12. I need RAw 8.2 and the program has 8.0.
    I have tryed help - update and it is searching for hours. Nothing happens. The program is installed yesterday.

    Are you updating from the Editor, if not go to Expert Mode and click:
    Help >> Updates
    But check first under the Help menu that you are signed-in - your email address used for you Adobe ID should be visible. You should be able to update to v8.5

  • Gettting itunes music/playlist back same way after new install of XP Pro

    I did a full image copy of my hard to an external drive, then blew away my hard drive and reinstalled XP Pro. I've installed itunes 9.x and now want to bring back into itunes my music from the saved image on the external drive. Can I bring back my music and or playlists to itunes exactly the same including the "date added" feature? I have tried to do many things people and others suggest such as renaming <itunes library.itl> and other files, moving <itunes music library.xml> to the desktop, doing something with Previous iTunes Libraries. I'm so confused and STUPID!!! I have this <itunes music library.xml> files in both itunes and itunes music folders which are both in doc andsetting\myname\mydocs\mymusic\itunes\itunesmusic.

    The four updates where as follows:
    KB839645
    KB841873
    KB840315
    KB842773
    One was an update for BITS, one was an ie6/outllook express update, one was xp security update and one was v5 update ( to replace v4).  Was getting the odd blue screen crash and slow load times but have fixed these, caused by services such as  BITS, Workstation etc running when not needed.
    Yeah the 9800 pro is not sharing power with anything
    The fix for it just now (when xp doesnt load)is to manually hit the reset button, boot into safe mode. shut down again and wait 20 seconds and reboot, if that doesnt work do it again boot in safe mode and delete keyboard restart and boots up.  though with old keyboard sometimes had to do this a few times.  thats why though my keyboard was faulty.
    Am now begining to suspect mobo is faulty, which i really hope is not the case as that'll be another faulty MSI part within 6 months.

  • Errors on new installed SOA suite

    Hi,
    I install SOA suite 10.1.3.1.0 and start it. BPEL Control, ESB Control, Rules Author is accessible, but when click Application Server Control I only get a HTTP 404 error, and Web Services Manager Control login page always prompt "login failure".
    what happens? how can i do then? any suggestion?
    Peter Wang

    Hi Jude,
    Find the content of the default-web-site.xml file below:
    <?xml version="1.0"?>
    <web-site xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/web-site-10_0.xsd" port="8888" display-name="OC4J 10g (10.1.3) Default Web Site" schema-major-version="10" schema-minor-version="0" >
         <default-web-app application="default" name="defaultWebApp" root="/j2ee" />
         <web-app application="system" name="dms" root="/dmsoc4j" />
         <web-app application="system" name="JMXSoapAdapter-web" root="/JMXSoapAdapter" />
         <web-app application="default" name="jmsrouter_web" load-on-startup="true" root="/jmsrouter" />
         <web-app application="javasso" name="javasso-web" root="/jsso" />
         <web-app application="ascontrol" name="ascontrol" load-on-startup="true" root="/em" />
         <web-app application="datatags" name="webapp" load-on-startup="true" root="/webapp" />
         <web-app application="orainfra" name="orainfra" load-on-startup="true" root="/orainfra" />
         <web-app application="WSIL-App" name="wsil-ias" load-on-startup="true" root="/inspection.wsil" />
         <web-app application="orabpel" name="httpbinding" load-on-startup="true" root="/httpbinding" />
         <web-app application="orabpel" name="admin" load-on-startup="true" root="/BPELAdmin" />
         <web-app application="orabpel" name="console" load-on-startup="true" root="/BPELConsole" />
         <web-app application="orabpel" name="startup" load-on-startup="true" root="/orabpel" />
         <web-app application="hw_services" name="deploy" load-on-startup="true" root="/integration/services/deploy" />
         <web-app application="hw_services" name="testconnection" load-on-startup="true" root="/integration/services/testconnection" />
         <web-app application="hw_services" name="taskservice" load-on-startup="true" root="/integration/services/TaskService" />
         <web-app application="hw_services" name="taskmetadataservice" load-on-startup="true" root="/integration/services/TaskMetadataService" />
         <web-app application="hw_services" name="taskqueryservice" load-on-startup="true" root="/integration/services/TaskQueryService" />
         <web-app application="hw_services" name="IdentityService" load-on-startup="true" root="/integration/services/IdentityService" />
         <web-app application="hw_services" name="hw_services" load-on-startup="true" root="/integration/services" />
         <web-app application="hw_services" name="worklistxpress" load-on-startup="true" root="/integration/oldworklistapp" />
         <web-app application="hw_services" name="worklistapp" load-on-startup="true" root="/integration/worklistapp" />
         <web-app application="rulehelp" name="rulehelp" load-on-startup="true" root="/ruleauthor/help" />
         <web-app application="ruleauthor" name="ruleauthor" load-on-startup="true" root="/ruleauthor" />
         <web-app application="esb-dt" name="esb_console" load-on-startup="true" root="/esb" />
         <web-app application="esb-rt" name="provider-war" load-on-startup="true" root="/event" />
         <web-app application="gateway" name="gateway" load-on-startup="true" root="/gateway" />
         <web-app application="ccore" name="ccore" load-on-startup="true" root="/ccore" />
         <web-app application="policymanager" name="policymanager" load-on-startup="true" root="/policymanager" />
         <web-app application="coreman" name="coreman" load-on-startup="true" root="/coreman" />
         <access-log path="../log/default-web-access.log" split="day" />
    </web-site>

  • ML 10.6.8 Contacts will not open, new install on Mac Pro

    Noob to the Mac world would appreciate some help.  Following is the crash info:
    Feb 12 07:27:42 griffs-mac-pro com.apple.dock.extra[292]: Could not open file at pah: /Users/griff/Library/Application Support/AddressBook/Sources/78B29AC6-33E6-4B67-A0C4-42FAFBBBAE82/AddressBook-v2 2.abcddb: Too many open files
    Feb 12 07:27:42 griffs-mac-pro com.apple.dock.extra[292]: Unknown error reading database file, will attempt reimporting: Error Domain=NSCocoaErrorDomain Code=256 "The operation couldn\U2019t be completed. (NSCocoaErrorDomain error 256.)" UserInfo=0x7fcdbd0b91c0 {NSSQLiteErrorDomain=14, NSUnderlyingException=unable to open database file} {
                  NSSQLiteErrorDomain = 14;
                  NSUnderlyingException = "unable to open database file";
    Thanks!

    The App Store application isn't found in your HD/Applications folder?
    What is this 10.6.6 disk image and where did you find it? The App Store started with 10.6.6 but your combo update should have also includedd it.

  • Error on new install

    Just installed the BI Publisher desktop. Install appeared to be fine.
    Open Word.
    Select BI Publisher/Logon
    Type in username and password
    Type in report server name
    get error stating:
    "Error while trying to access server location"
    "Illegal characters in path"
    The server has a dash in it.
    Ex: 'Server-Name'
    Ideas?

    What did you fill in on report server name,
    this must be the same url as you go to publisher, so something like:
    http://publisherserver:9703/xmlpserver/

Maybe you are looking for