Program error line 131 in.\Error.cpp
Hello -
I am absolutely not an expert. I had this error while synchronizing. Please note that it happened just before installing the software version 7.1 pack 2039 that I have now.
You can see an excerpt of the sync log below - in Italian but I guess relevant info are clear to you-
"(...) Lettura di 510 record 17:31:56.807 ModInfo: untruncated previous ModInfo = 2007/12/07 13:26:56, recId = 000000001A0B8AAB4F377649B7F0503C93F0877284EF2400 17:31:56.807 ModInfo: original previous ModInfo is = 2007/12/07 13:26:56 17:31:56.809 Engine working - message event complete for messageId 15003 Lettura di 511 record 17:31:56.809 ModInfo: untruncated previous ModInfo = 2011/11/19 21:37:113894851412, recId = 000000001A0B8AAB4F377649B7F0503C93F08772C4EF2400 17:31:56.809 ModInfo: truncated previous ModInfo is = 2011/11/19 21:37:11 17:31:56.809 ModInfo: Primary ModInfos differ. Previous: [2011/11/19 21:37:11] != current: [2012/10/08 09:39:11]. Checking Crc values 17:31:56.816 ModInfo: Previous Crc: = [3894851412], Current: Crc = [1545885461], record was changed. 17:31:56.848 End Sync with Error 2 17:31:56.848 Ending Sync Status Checks 17:31:56.849 Engine working - message event complete for messageId 13000 17:31:57.298 Sync Engine Completed (14005) 17:31:57.298 Sincronizzazione completata a 05:31:57 PM on 10/10/12 17:31:57.298 Sincronizzazione completata a 05:31:57 PM on 10/10/12"
What does this error affects?
Can you help me fix it?
Thanks in advance.
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB32032&sliceId=2&cmd=displayKC&d...
Similar Messages
-
Login: PAM Error (line 313): Critical error - immediate abort?
Hi there,
so I'm having problem with my MacBook Air. Since a few days it is taking realllly long to start up.
And it asks my password (even I didn't require that).
When I checked my Terminal it said: login: PAM Error (line 313): Critical error - immediate abort
what can I do? can someone help me?
Thanks!Post Unix/Terminal queries in the Unix forum under OS X Technologies.
-
Error line 392 in eventoracle.cpp when using activeX callback vi.
I am using an activeX control built in VC6.0. I followed the instructions to handle the activeX event using the Reg Event Callback node. It is being handled because I have a message box within the handler that does appear. But after the handler executes, LV crashes with the statement that eventoracle.cpp failed at line 392.
I found that the issue is not the ActiveX event, but where is the event fired from in the ActiveX control. I have a worker thread that calls the parent thread's method to fire the event. If I move the firing of the event outside of this worker thread, I have no problems getting handling the event.
-
ERROR: (line 0): Internal error compiling the filter.
It seems graph compiler is very touchy. I downloaded pixel bender few days ago, so I bet this is not fixed yet.
Thing that compiles:
void evaluatePixel()
dst = sample (src, outCoord ());
Thing that also compiles:
void evaluatePixel()
float2 at = outCoord ();
pixel4 d = sampleNearest(src, float2 (at.x - 0.0, at.y - 0.0));
dst = d;
Thing that does not compile:
void evaluatePixel()
float2 at = outCoord ();
pixel4 d = sampleNearest(src, float2 (at.x - 0.0, at.y - 0.0));
dst = sample (src, outCoord ());
Full graph here.found http://forums.adobe.com/message/56016 saying "it is illegal to use both types of sampling in a kernel". that was it. could be cool if it was saying that instead of "internal error" too.
-
I am trying to make a movie and burn it to a disk for school but I keep getting that error (Internal Software Error: .\Vobulator\MuxPlanner\AudioPackPlanner.cpp, Line 530) It occures after about 5 or 10 minutes of transcoding. The original file was a mkv file format with a dts audio and a avs video track.
Here is the detail of the video.
Format : Matroska
Format version : Version 2
File size : 6.56 GiB
Duration : 2h 10mn
Overall bit rate : 7 197 Kbps
Encoded date : UTC 2011-10-26 03:46:55
Writing application : mkvmerge v4.8.0 ('I Got The...') built on May 24 2011 03:12:58
Writing library : libebml v1.2.0 + libmatroska v1.1.0
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 5 frames
Muxing mode : Header stripping
Codec ID : V_MPEG4/ISO/AVC
Duration : 2h 10mn
Bit rate : 5 689 Kbps
Width : 1 280 pixels
Height : 528 pixels
Display aspect ratio : 2.40:1
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.351
Stream size : 5.05 GiB (77%)
Writing library : x264 core 119 r2106 07efeb4
Encoding settings : cabac=1 / ref=5 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=-2 / threads=12 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=50 / rc=2pass / mbtree=1 / bitrate=5689 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / aq=1:1.00
Language : English
Audio
ID : 2
Format : DTS
Format/Info : Digital Theater Systems
Muxing mode : Header stripping
Codec ID : A_DTS
Duration : 2h 10mn
Bit rate mode : Constant
Bit rate : 1 510 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 24 bits
Compression mode : Lossy
Stream size : 1.38 GiB (21%)
Language : English
Knowing that Encore does not support mkv I demuxed the mkv taking out the video track into a .h264 file using mkvextract. I then muxed it into a mp4 without the audio using mp4box then dragged it into encore without any problems. For the audio, I just demuxed it out into a dts and dragged that in as well. I then created a new timeline and dragged each peice of media into there corresponding sections on the time line. I tried to play the video but there was no audio. I treid to import the dts and got a warning saying something like, "DTS is supported in this version of Encore (CS5) but just not in preview. When I burn it to the disk there will be no problems" So I just went ahead and tried to build the video into a dvd folder for a dual layer disk.
The setting I have for the DVD is default except I changed the bitrate to 9.4mbps. That's the only thing I changed. (I used NTSC)
I played the audio using an external player to see if it plays and it did. When I check to see if there is any problems with the build it only says something about start remote and end action. I have never set them before so I don't think that should matter.
I have Encore installed on my secondary drive (Not C: which is windows) and I treid to create the DVD Folder on that drive. When I got this problem I just thought it was that it could not create the files on the drive because the program isn't running off that drive which it should be, I treid to create the DVD Folder on the C: drive and I still revieve the same error.
Does anyone know how I can get past this? I need this to be done by tomorrow for school in the morning.Hi Stan and thank you for your concern, I was (I am) getting that in a timeline. and also a kind of general error when I was trying to build ether a folder or an image. I had made a copie of the project for me to delete all menus I also change all "end actions" who were on "stop" configuration but still my problem was there. In this project in encore two things I did witch may be the coz ot the problem?
-first when changing the menu styls and edition with Ps (maybe I did some thing wrong there?) and
-second when changing throught encore the markers on my principal time line witch maybe a did in a wrong way.
whatsoever thank you and sorry that I took a long time to answer, regarding my english writting you allready undertand that it is not my language. In addition I'm not a professional in editing but I'm still learning. I think it will be quiker for me to do the project again till the start on encore even if for me it wood be good for to know where the problem came from for me not to do it again.
Thanks a lot best regard
Fabian -
Hi Experts ,
i have a scenario proxy to soap where i am getting error while getting the response .
we are sending the request successfully and getting response .some times we are getting in proxy level error below
PARSE_APPLICATION_DATA Error during XML => ABAP conversion: Response Message; CX_ST_DESERIALIZATION_ERROR in /1SAI/SAS0446CC11CC6EC1AD4789 Line 24 An error occurred when deserializing in the simple transformation program /1SAI/SAS0446CC11CC6EC1AD4789 (Cha
Please help us to fix this bug in proxy response.
Regards
RaviHello Ravinder,
Can you please post the complete stack trace, it seems to be some fields are getting truncated i,e data sent from the program to the proxy object might be violating some length restrictions.
Please check your message interface field lengths and what is being passed to the proxy.
Regards,
Ravi. -
Slide Show ERROR, Internal software\Vobulator\BlockPlanner\.cpp Line 217
I'm putting together a slide show DVD. There are a total of 7 slide shows containing 480 pictures. All pictures are jpg's about 1000X1600 pixels and 500KB-700KB each. I have 3 menus for navigation. Not all of the chapter menu buttons point to a "slide show", some of them point to a picture inside certain slide shows according to my client's requests. (example, slide show 1 contains 70 pictures. Chapter 1 points to "slide show 1" Chapter 2 points to "slide show 1 photo 50"). All slide shows are linked so that when the first slide show is over, it will automatically "end action" to the next slide show etc... All my settings are typical. NTSC 4:3 SD 720X480 progressive.
There are NO video files in my DVD at all. No timelines at all. No audio at all.
The Symptoms/problem that I'm getting is this, when I try to Preview my DVD and ALSO when I try to build my DVD, the build will go through and "build the slide shows" then after it does that, this will come up
I've read some of the previous posts (one of them is in French for cryin out loud. Had to use Bing translator and it sounds all weird). What I can gather is this,
Re: internal software error: .\Vobulator\BlockPlanner\BlockPlanner.cpp, line 217
I found out it was due to selecting an image file as the video layer
in a menu, causes the error everytime. I just paste the image in with
'edit in photoshop' instead now. But thanks."
Another person said just about the same thing... The only problem is, I have no idea what this means. I don't know what it means to "select an image file as the video layer in a menu..."
Hardware/software is as follows:
custom build:
i5 processor (4 core) 2.6ghz
8 GB RAM 1333MHz
300GB C: drive (2X150 GB 10K RPM Raptors)
1.2TB D: drive (2X7,200 RPM 640GB WD's)
Burner is LG Super multi
secondary burner is Sony Commercial Blu-Ray burner
Video card is Saphire Build (Radeon 5450 PCI-E 16X)
Windows 7 X64 Pro
All Adobe is CS5 Production package.
If I'm leaving anything out, please let me know.
HELP! and Thanks. I'd really love to fix this without rebuilding the whole DVD. Take long time.
TEXYou really gain nothing by posting the same thing twice... http://forums.adobe.com/thread/971701
-
Windows LV6.0 running on Linux Wine: config.cpp error (line 404)
Have anyone tried to run LabView (Windows version) under Linux using the Wine "emulator"?
Trying this on Debian Woody, with a Win98 install of LabView 6.0 returns:
config.cpp error (line 404)
I tried to search for such a file on both Win/Linux partitions: there's none.
So how am i gonna check this line 404?
Any clue would be strongly welcome!I agree with Labviewguru about getting Labview for Linux. The only
problem is that you have to dish out $2000 or $3500. They don't have a
Base package.
I'm not sure if NI recomends a particular window manager but I do know it
will run on any of them. In an extreme case I used it on a PII 233MHz,
64MB ram, and a 300 MB disk. It was a Slackware distro using the fvwm2
window manager. Ran great. Presently I run it with Gnome.
My point is that if you have to buy a LV for Linux license, at least you
can save money buy putting it on a machine that's been used as a paper
weight for several years.
-kevin
In article <[email protected]>,
"Labviewguru" wrote:
> I don't believe you can run LabVIEW in an e
mulation environment. There
> is too much system control that LabVIEW needs a handle on to be able to
> run on an emulator.
>
> The reason you are not able to find and troubleshoot that file is
> because it is part of the source code for LabVIEW, and doesn't exist
> except in a super secret vault which may or may not be located in Austin
> Texas...
>
> Are you aware that there is a version of LabVIEW for Linux? I believe
> that they recommend running KDE or similar GUI, but check on the support
> website for that at ni.com/linux.
>
> I hope that was enough of a clue... -
I am very frustrated...
I am using Encore CS3 on a relatively fast system with 2g of ram. I have successfully burned disc using Encore CS3 but it is a crap-shoot. Sometimes it works and half of the time I get this:
Internal Software Error:.\Vobulator\Titleplaner\CVOBUPlanner.cpp,Line 331
I am trying to burn a simple disc - nothing crazy. A static menu with three chapters linked to 3 points on a 1hour and 45minute avi file in the timeline. I organize it check the project and everything is fine. I start the build and it begins to transcode - everthing is still good. After the transcode it begins to organize the disc or something - and that is when I get the error message.
I click OK on the dialog box and notice that the video in the timeline is now only 5 frames long and the audio is still there. (I thought the video had totally dissapeared but when I zoomed in for a closer look I realized it had ben reduced from almost 2 hours to 5 frames.) I look to the project window and it shows that the AVI has been transoded and it shows that time of the transoded file is normal length.... I am lost.
Anyone have any ideas?
Mat CainLong File Names Cause Crashing http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
Also, for Encore CS4 Roxio component problem http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS -
I am burning a DVD that has 10 slideshows. Each slideshow is treated as a chapter. I have burned DVDs in the past using this method with no problems. Now, with this project I get the following.
internal software error: .\vobulator\titleplanner\cgopgrouper.cpp, line 401This error came up again (the first time i had to rebuild), and i figured out that it had to do with a clip i had in a timeline that needed trimming, and would not butt up cleanly to the preceeding clip. i am assuming that the chapter point i inserted did not fall on a GOP, and generated this error.
when i took that clip out of the timeline and put it in it's own seperate timeline, the disc burned with no problem.
hope this help someone else skip the frustration i had. -
Error Message File: \ \src\rmsdk_api_readr.cpp Line: 1405 Expression: loc!=NULL
Please try on latest ADE version: 4.0.3
-
TX BDLS - Syntax error in program SBDLS21020100127145818 line SELECT SINGLE
Hi All,
I am in the process of configuring a QAS system taken from a copy of th production system, I am going into TX BDLS and getting the following error message Syntax error in program SBDLS21020100127145818 line SELECT SINGLE AWSYS FROM DFKKKO has anyone got any ideas about this issue?
Thanks
JayForce manual activation in se11 this tables: (SE11 -> display -> menu 'table' -> actívate)
DFKKKO
DFKKCOLFILE_P_W
DFKKMKO
DFKKREP06
DFKKREP06_S
DFKKREP07
DFKKREV06
DFKKREV07
Try again the BDLS.
Regards. -
When I'm ready with my Encor proj. to build the DVD, I go in the menu to Build, a popup comes up withe the next text "internal software error: \VCD\Primo\Primo Target.cpp,line 54" and it stops. Building disc is impossible. I've tried it with another (old) project, which is ready (and which I've already made a DVD) it gives the same error.The same error occurs trying to build a folder.
The only google hits for this error are this thread and the other one you found.
http://forums.adobe.com/thread/1274995?tstart=0
Odd error.
A similar error here:
http://forums.adobe.com/message/5736340#5736340
Getting the error building to a folder makes it espcially odd.
I did not find this site the last time, but primo appears to be a company:
http://www.primosoftware.com/ -
I just got a Blackberry Curve 9320, and when I try to load my Outlook calendar through the Desktop manager, it comes up with "error at line 131". Now what?
Hello DMazik
Welcome to BlackBerry Support Forums
Please go through this Knowledge Base :
KB32032 : Recurring appointments of a specific pattern cause the sync to fail with an error message in BlackBerry Desktop Software.
Good luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
Not able to display flat file's error line in output
The below Source Code is BDC for XD01 (update Customer Master Record) in CALL TRANSACTION method. This program is written in call transaction method cause as per users requirement, user wants error log to be printed as soon as the BDC process finished in the background mode.
When you execute this below program it will show a selection screen from where you can select your flat file from system.
After executing this code show output like below as soon as it finished processing the FLAT file.
1. Customer Update Summary
2. Successful record with customer number and name.
3. Error Records with 'record number' and 'reason for error'
(For testing you just have to copy-paste-save-active the source code)
And I have encountered an issue over here in 3rd section-Record Number of Error Records.
The Record Number is for display the line number of that flat file line which in which error has occurred.
The Record Number Entries showing only 0 instead of showing line number of error entry .
I have used Function Module FORMAT_MESSAGE to capture the errors. But not able to display line number of that flat file which is containing error.
So please suggest me what changes I should make in below source code to get proper output.
Flat file for your R&D
1000 1000 10 10 0001 Company Chobey & Group1N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS 1 A 10 1
1000 1000 10 10 0001 Company Chobey & Group2N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS 1 A 10 1
1000 1000 10 10 0001 Company Chobey & Group3N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS . A 10 1
1000 1000 10 10 0001 Company Chobey & Group4N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS 1 A .. 1
1000 1000 10 10 0001 Company Chobey & Group5N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS 1 A 10 1
And Source Code
*& Report Z_TEST_SAI *
REPORT Z_TEST_SAI no standard page heading line-size 255.
TYPES: BEGIN OF t_cust,
bukrs like rf02d-bukrs,
vkorg like rf02d-vkorg,
vtweg like rf02d-vtweg,
spart like rf02d-spart,
ktokd like rf02d-ktokd,
anred like kna1-anred,
name1 like kna1-name1,
sortl like kna1-sortl,
name2 like kna1-name2,
name3 like kna1-name3,
name4 like kna1-name4,
stras like kna1-stras,
pfach like kna1-pfach,
ort01 like kna1-ort01,
pstlz like kna1-pstlz,
ort02 like kna1-ort02,
pfort like kna1-pfort,
pstl2 like kna1-pstl2,
land1 like kna1-land1,
regio like kna1-regio,
telx1 like kna1-telx1,
telf1 like kna1-telf1,
telfx like kna1-telfx,
telf2 like kna1-telf2,
teltx like kna1-teltx,
stceg like kna1-stceg,
cityc like kna1-cityc,
lzone like kna1-lzone,
niels like kna1-niels,
kukla like kna1-kukla,
akont like knb1-akont,
fdgrv like knb1-fdgrv,
vzskz like knb1-vzskz,
zterm like knb1-zterm,
vkbur like knvv-vkbur,
versg like knvv-versg,
vsbed like knvv-vsbed,
ktgrd like knvv-ktgrd,
taxkd like knvi-taxkd,
END OF t_cust.
TYPES: BEGIN OF t_sucrec,
cnum TYPE kna1-kunnr, "Customer Number
cnam TYPE kna1-name1, "Customer Name
END OF t_sucrec.
TYPES: BEGIN OF t_errrec,
* lineno TYPE i, "Line Number
lineno TYPE string,
message TYPE string, "Error Message
END OF t_errrec.
DATA: v_file TYPE string, "Variable for storing flat file
it_cust TYPE STANDARD TABLE OF t_cust, "Internal table of Customer
wa_cust LIKE LINE OF it_cust, "Workarea of Internal table it_cust
it_sucrec TYPE STANDARD TABLE OF t_sucrec, "Internal table of Success records
wa_sucrec LIKE LINE OF it_sucrec, "Workarea of Internal table it_sucrec
it_errrec TYPE STANDARD TABLE OF t_errrec,
wa_errrec LIKE LINE OF it_errrec,
it_bdctab LIKE bdcdata OCCURS 0 WITH HEADER LINE, "Internal table structure of BDCDATA
it_messagetab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE, "Tracing Error Messages
v_date LIKE sy-datum, "Controlling of session date
v_index LIKE sy-index, "Index Number
v_totrec TYPE i, "Total Records
v_errrec TYPE i, "Error Records
v_sucrec TYPE i, "Success Records
v_sesschk TYPE c. "Session maintenance
*& SELECTION-SCREEN
SELECTION-SCREEN: BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001 NO INTERVALS.
PARAMETERS: p_file TYPE rlgrap-filename. "rlgrap-filename is a predefined structure
SELECTION-SCREEN: END OF BLOCK blk1.
SELECTION-SCREEN: BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002 NO INTERVALS.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N',
p_update LIKE ctu_params-updmode DEFAULT 'A'.
SELECTION-SCREEN END OF BLOCK blk2.
*& INITIALIZATION
INITIALIZATION.
v_date = sy-datum - 1.
*& AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
FIELD_NAME = ' '
IMPORTING
file_name = p_file.
*& START-OF-SELECTION
START-OF-SELECTION.
v_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = it_cust
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc = 0.
*MESSAGE ID sy-msgid
*TYPE sy-msgty
*NUMBER sy-msgno
*WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& END-OF-SELECTION
END-OF-SELECTION.
v_index = sy-index.
LOOP AT it_cust INTO wa_cust.
perform bdc_dynpro using 'SAPMF02D' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02D-KTOKD'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02D-BUKRS'
wa_cust-bukrs.
perform bdc_field using 'RF02D-VKORG'
wa_cust-vkorg.
perform bdc_field using 'RF02D-VTWEG'
wa_cust-vtweg.
perform bdc_field using 'RF02D-SPART'
wa_cust-spart.
perform bdc_field using 'RF02D-KTOKD'
wa_cust-ktokd.
perform bdc_dynpro using 'SAPMF02D' '0110'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-TELTX'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNA1-ANRED'
wa_cust-anred.
perform bdc_field using 'KNA1-NAME1'
wa_cust-name1.
perform bdc_field using 'KNA1-SORTL'
wa_cust-sortl.
perform bdc_field using 'KNA1-NAME2'
wa_cust-name2.
perform bdc_field using 'KNA1-NAME3'
wa_cust-name3.
perform bdc_field using 'KNA1-NAME4'
wa_cust-name4.
perform bdc_field using 'KNA1-STRAS'
wa_cust-stras.
perform bdc_field using 'KNA1-PFACH'
wa_cust-pfach.
perform bdc_field using 'KNA1-ORT01'
wa_cust-ort01.
perform bdc_field using 'KNA1-PSTLZ'
wa_cust-pstlz.
perform bdc_field using 'KNA1-ORT02'
wa_cust-ort02.
perform bdc_field using 'KNA1-PFORT'
wa_cust-pfort.
perform bdc_field using 'KNA1-PSTL2'
wa_cust-pstl2.
perform bdc_field using 'KNA1-LAND1'
wa_cust-land1.
perform bdc_field using 'KNA1-REGIO'
wa_cust-regio.
perform bdc_field using 'KNA1-SPRAS'
'EN'.
perform bdc_field using 'KNA1-TELX1'
wa_cust-telx1.
perform bdc_field using 'KNA1-TELF1'
wa_cust-telf1.
perform bdc_field using 'KNA1-TELFX'
wa_cust-telfx.
perform bdc_field using 'KNA1-TELF2'
wa_cust-telf2.
perform bdc_field using 'KNA1-TELTX'
wa_cust-teltx.
perform bdc_dynpro using 'SAPMF02D' '0120'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-CITYC'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNA1-STCEG'
wa_cust-stceg.
perform bdc_field using 'KNA1-CITYC'
wa_cust-cityc.
perform bdc_field using 'KNA1-LZONE'
wa_cust-lzone.
perform bdc_dynpro using 'SAPMF02D' '0125'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-KUKLA'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNA1-NIELS'
wa_cust-niels.
perform bdc_field using 'KNA1-KUKLA'
wa_cust-kukla.
perform bdc_dynpro using 'SAPMF02D' '0130'.
perform bdc_field using 'BDC_CURSOR'
'KNBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0340'.
perform bdc_field using 'BDC_CURSOR'
'RF02D-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0360'.
perform bdc_field using 'BDC_CURSOR'
'KNVK-NAMEV(01)'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0210'.
perform bdc_field using 'BDC_CURSOR'
'KNB1-VZSKZ'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNB1-AKONT'
wa_cust-akont.
perform bdc_field using 'KNB1-FDGRV'
wa_cust-fdgrv.
perform bdc_field using 'KNB1-VZSKZ'
wa_cust-vzskz.
perform bdc_dynpro using 'SAPMF02D' '0215'.
perform bdc_field using 'BDC_CURSOR'
'KNB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNB1-ZTERM'
wa_cust-zterm.
perform bdc_dynpro using 'SAPMF02D' '0220'.
perform bdc_field using 'BDC_CURSOR'
'KNB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0230'.
perform bdc_field using 'BDC_CURSOR'
'KNB1-VRSNR'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0610'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'BDC_CURSOR'
'RF02D-KUNNR'.
perform bdc_dynpro using 'SAPMF02D' '0310'.
perform bdc_field using 'BDC_CURSOR'
'KNVV-VERSG'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNVV-AWAHR'
'100'.
perform bdc_field using 'KNVV-VKBUR'
wa_cust-vkbur.
perform bdc_field using 'KNVV-WAERS'
'INR'.
perform bdc_field using 'KNVV-KALKS'
'1'.
perform bdc_field using 'KNVV-VERSG'
wa_cust-versg.
perform bdc_dynpro using 'SAPMF02D' '0315'.
perform bdc_field using 'BDC_CURSOR'
'KNVV-VSBED'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNVV-LPRIO'
perform bdc_field using 'KNVV-KZAZU'
'X'.
perform bdc_field using 'KNVV-VSBED'
wa_cust-vsbed.
perform bdc_field using 'KNVV-ANTLF'
'9'.
perform bdc_dynpro using 'SAPMF02D' '0320'.
perform bdc_field using 'BDC_CURSOR'
'KNVV-KTGRD'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNVV-BOKRE'
'X'.
perform bdc_field using 'KNVV-KTGRD'
wa_cust-ktgrd.
perform bdc_dynpro using 'SAPMF02D' '1350'.
perform bdc_field using 'BDC_CURSOR'
'KNVI-TAXKD(01)'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNVI-TAXKD(01)'
wa_cust-taxkd.
perform bdc_dynpro using 'SAPMF02D' '0324'.
perform bdc_field using 'BDC_CURSOR'
'KNVP-PARVW(01)'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
CALL TRANSACTION 'XD01' USING it_bdctab
MODE p_mode
UPDATE p_update
MESSAGES INTO it_messagetab.
IF sy-subrc = 0.
*& reading success records to corresponding internal table
READ TABLE it_messagetab WITH KEY msgtyp = 'S'.
IF sy-subrc = 0.
wa_sucrec-cnum = it_messagetab-msgv1.
wa_sucrec-cnam = wa_cust-name1.
APPEND wa_sucrec TO it_sucrec.
CLEAR wa_sucrec.
ENDIF.
ELSE.
*& reading error records to corresponding internal table
READ TABLE it_messagetab WITH KEY msgtyp = 'E'.
IF sy-subrc = 0.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = sy-msgid
no = it_messagetab-msgnr
v1 = it_messagetab-msgv1
v2 = it_messagetab-msgv2
v3 = it_messagetab-msgv3
v4 = it_messagetab-msgv4
IMPORTING
msg = wa_errrec-message.
wa_errrec-lineno = v_index.
*******wa_errrec-lineno = v_index.
*******wa_errrec-message = it_messagetab-msgv1.
APPEND wa_errrec TO it_errrec.
CLEAR wa_errrec.
ENDIF.
ENDIF.
CLEAR : it_bdctab, it_messagetab.
REFRESH: it_bdctab, it_messagetab.
ENDLOOP.
DESCRIBE TABLE it_cust LINES v_totrec.
DESCRIBE TABLE it_errrec LINES v_errrec.
DESCRIBE TABLE it_sucrec LINES v_sucrec.
PERFORM disp_data.
SKIP 2.
IF v_sucrec > 0.
PERFORM disp_success_data.
ENDIF.
SKIP 2.
IF v_errrec > 0.
PERFORM disp_error_data.
ENDIF.
*& Form bdc_dynpro
*# text
*# -->P_0104 text
*# -->P_0105 text
FORM bdc_dynpro USING program
dynpro.
CLEAR it_bdctab.
it_bdctab-program = program.
it_bdctab-dynpro = dynpro.
it_bdctab-dynbegin = 'X'.
APPEND it_bdctab.
ENDFORM. " bdc_dynpro
*& Form bdc_field
*# text
*# -->P_0109 text
*# -->P_IT_cust_LIFNR text
FORM bdc_field USING fnam
fval.
CLEAR it_bdctab.
it_bdctab-fnam = fnam.
it_bdctab-fval = fval.
APPEND it_bdctab.
ENDFORM. " bdc_field
*& Form disp_data
*# text
*# --> p1 text
*# <-- p2 text
FORM disp_data .
ULINE (45).
WRITE : / sy-vline,
12 'FAMD CUSTOMER UPDATE SUMMARY'(004) COLOR 1,
45 sy-vline.
ULINE /(45).
WRITE : / sy-vline,
'Total Records Processed'(007),
28 '=',
30 v_totrec,
45 sy-vline,
/ sy-vline,
'Error Records'(005),
28 '=',
30 v_errrec,
45 sy-vline,
/ sy-vline,
'Successful Records'(006),
28 '=',
30 v_sucrec,
45 sy-vline.
ULINE /(45).
ENDFORM. " disp_data
*& Form disp_success_data
*# text
*# --> p1 text
*# <-- p2 text
FORM disp_success_data .
ULINE (45).
WRITE : / sy-vline,
14 'Successful Records'(012) COLOR 1,
45 sy-vline.
ULINE /(45).
WRITE : / sy-vline ,
'Customer Number'(010) COLOR 2,
17 sy-vline,
25 'Customer Name'(011) COLOR 2,
45 sy-vline.
ULINE /(45).
LOOP AT it_sucrec INTO wa_sucrec.
WRITE: / sy-vline ,
wa_sucrec-cnum,
17 sy-vline,
19 wa_sucrec-cnam,
45 sy-vline.
ENDLOOP.
ULINE /(45).
ENDFORM. " disp_success_data
*& Form disp_error_data
*# text
*# --> p1 text
*# <-- p2 text
FORM disp_error_data .
ULINE (85).
WRITE : / sy-vline,
35 'Error Records'(013) COLOR 1,
85 sy-vline.
ULINE /(85).
WRITE : / sy-vline,
'Record Number'(008) COLOR 2,
sy-vline,
37 'Reason for error'(009) COLOR 2,
85 sy-vline.
ULINE /(85).
LOOP AT it_errrec INTO wa_errrec.
WRITE : / sy-vline,
wa_errrec-lineno,
17 sy-vline,
wa_errrec-message,
85 sy-vline.
ENDLOOP.
ULINE /(85).
ENDFORM. " disp_error_dataWorked out n found the solution
Maybe you are looking for
-
Report for Bill-to and Sold-to relationship
Hi, We want a report like---Bill-to(A) is assigned for which are all Sold-to parties. Because we will be having like one bill-to will assigned to ' n' number of sold-to parties Can anybody tell from which table or any t-code, to take the report. Reg
-
Business catalyst upload folders
Hi, I have my website design in muse and I am using filezilla to upload to site right now. I am in the process of updating the site with new e-commerce and all into BC. I have a folder not too big 67mb with lots of sub folders and files that I want
-
Publish to .mac gallery with FCP
Hi with imovie 08 you can publish directly to the .mac gallery. i find this very useful because i can put movies online for my clients to review. But I work with FCP not imovie, does anyone know if there is a plug-in or something for fcp to export yo
-
Exporting song to disc - strange problem with MP3
This works fine more than 9 times out of 10, but once in a while, when I try to export a podcast episode as an MP3, GB does the mixdown and normalizes, but does not convert it to an MP3. The settings are exactly the same as they were for the many oth
-
Saving a rotated pdf in that position?
i have a photo album i have scanned ,the phot os are too old to be removed from the page,so ive scanne d them and they come as pdf .i want to rotate them to sen d to a family member overseas.....problem is every time i rotate and save them....the fil