Program error using Auto-blend in CS4
When I try to do a depth-of-field auto-blend with five or six layers (with or without auto-align first) Photoshop starts to do the blend and then stops with this error message:
Could not complete auto-blend layers command because of program error. OR Could not auto-blend the layers because of program error.
The NEF layers were created with my D300, and are 4288 by 2488 pixels. I also converted them to TIF and tried it that way. And I tried converting to 8 bit mode - also failed. If I change the image size to 1000 pixels it works. According to Photoshop Preferences I have 1675 MB available RAM, photoshop is allowed to use 1356 MB. According to my Control Panel I have 3.00 GB of RAM in Windows XP with Service Pack 3. Do you have suggestions, other than adding RAM, for making it work?
when Photoshop starts acting up it's always a good idea to reset your preferences
http://forums.adobe.com/thread/375776?tstart=0
Similar Messages
-
Photoshop freezes when using Auto-Blend Layers - Stack Images
I used to have CS5 on my computer, after which I used the CS6 trial, and I never had any problems when stacking images using Auto-Blend Layers -> Stack Images. However, I recently purchased a subscription to Adobe Creative Cloud and after uninstalling the old PS versions and installing Cloud, Photoshop freezes every time I try to stack images.
My computer has very good specs, runs Windows 7, and both the OS and PS are up to date.
Why is PS freezing? What can I do to fix the problem?Sure, here you go:
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3510 MHz
Built-in memory: 16339 MB
Free memory: 10640 MB
Memory available to Photoshop: 14673 MB
Memory used by Photoshop: 60 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 3.0
OpenGL Version: 3.0
Video Rect Texture Size: 16384
OpenGL Memory: 2047 MB
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 660 Ti/PCIe/SSE2
Display: 3
Display Bounds: top=0, left=0, bottom=1200, right=1920
Display: 2
Display Bounds: top=0, left=-1920, bottom=1200, right=0
Display: 1
Display Bounds: top=0, left=1920, bottom=1200, right=3840
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 660 Ti
Driver Version: 9.18.13.1407
Driver Date: 20130209000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1200 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 660 Ti
Video Card Memory: 2048 MB
Serial number: 90970778314918217596
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Nathan\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 119.2G, 45.3G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/09/10-12:31:21 5.0.4 79.517869
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 7.0.0.1686
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.1.0.20577 2.1.0.20577
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 2.1.2.1681
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
Required plug-ins:
3D Studio 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
Angled Strokes 13.0
Average 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.4
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Collada 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Embed Watermark 4.0
Entropy 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Extrude 13.0
FastCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Maximum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mean 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Measurement Core 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Median 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mezzotint 13.0
Minimum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
MMXCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Picture Package Filter 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Pinch 13.0
Pixar 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Range 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.1.2
Shear 13.0
Skewness 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
STL 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Sumi-e 13.0
Summation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Variations 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
WIA Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Wind 13.0
Wireless Bitmap 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONE
Thanks for your help. -
Program error using quick selection tool
When I try to use the quick selection tool in PS4, I get the message that it is not available because of a program error. Any help on this?
when Photoshop starts acting up it's always a good idea to reset your preferences
http://forums.adobe.com/thread/375776?tstart=0 -
I am using photoshop cc 30 day trial and cant seen to use auto-blending option its just greyed out I have followed all the videos and instruction but still cant seem to use it does anyone know why??
Go to the Acrobat forum here to discuss PDF form creation and editing with Adobe's own Acrobat products. CutePDF Writer, created by another company, only writes PDF. It cannot create or edit forms.
-
Eraser + Auto-Blend layers = problem
Hello,
I've been using "Auto-Blend layers" to edit faces in Photoshop. For example: putting Brad Pitt's face on Tom Cruise's face or something like that... However, I seem to have the exact same problem each time.
I use the following method:
Two layers (layer 1 = background = original person) + face of new person (layer 2 = cut out from different .psd with pen tool).
Align faces with eachother (try to match eyes/lips/nose)
Erase parts to make it fit better
Select pixels layer 2
Select "Inverse" layer 2
Select Modify -> Expand -> 6px layer 2
Select "Inverse" layer 2
Delete selected part on the layer 1 with background (layer 1 original face gets deleted)
Select both layers
Auto-Blend Layers
Result done
This entire method works fine, except for the eraser part. (Erase parts to make it fit better) When I use my eraser on the new face to erase some parts that overlap the original face or something, it always turns out bad after using Auto-Blend layers. You can see parts of the transparent background -> it doesn't fit properly. This only happens when I use the eraser. When I use the entire method without fixing some parts with the eraser, it works fine but this way the face doesn't fit 100% since certain details don't match.
Anyway, I wonder why the eraser messes up Auto-Blend layers. I even tried moving the new face (I used eraser on) to a new .psd with the same original person and Auto-Blend layers keeps having parts of the transparent background when the faces get auto-blended. How can I fix this?You probably would have to go into the mechanics of what the auto blend layer tool is doing. It is meant to stitch two images together such as a panarama. Your case is a little different and erasing may disturb the way the tool combines the underlying layers.
-
Can't auto blend two 8-bit RGB Images?
So I'm trying to do a face blend and I've repeated the process three times in order to make sure I'm not making any mistakes, but I still can't auto blend the two layers. Any time I go Edit, auto-blend layers it's greyed out which is quite frustrating. I've taken a couple of screenshots to illustrate my problem. I am using CS6 on a new MacBook Pro. I've looked all over the internet including this site but not a single post I have found has helped me. Can anyone help me with this?
Three problems
One of the layers is a Smart object. You can't use auto blend layers on a Smart Object.
You have an active selection. You can't use auto blend layers with an active selection.
Auto blend layers is not a good choice for compositing the new face, and will give poor results. Better to add a layer mask to the new face and feather the edges. -
Photoshop gives, Program Error, when attempting to use blending options in RGB
This problem started today when i tryed to throw a drop shadow on a layer. in RGB mode. "Program Error," appeared and would not let me access any Blending options. Although, in cmyk mode it works perfectly fine. Was some hotkey hit on accident or has something gone wrong? Help!
Adam
Adobe Photoshop CS6 Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bitHmm.
Can you tell us more about what you're doing and what sort of document(s) you are using? -
Photoshop CS4 "Program Error" when using Text tool
Hello. I was having problems with Photoshop displaying a "Program Error" every so often, so I deleted the preference file and all seemed good. But after deleting the preference file for my Photoshop CS4 and re-launching Photoshop, the text tool causes Photoshop to display a Program Error when using the tool. It never did this before. Should I reinstall Photoshop? I am using a Powermac G5 running 10.5.8. I have already tried repairing the disk permissions.
ThanksThats kinda what I thought too, but the problem started happening randomly. It started when we were trying to use photomerge with large photos. The program just started giving the program errors. I still think it may be a font problem, but without going through my 2000+ fonts and disabling them one by one, how can I resolve this issue?
Thanks -
Photoshop CS4: Could not complete your request because of a program error.
Hello,
I find myself in an interesting dilemma. I've had CS4 for a bunch of years now and have loved it. Unfortunately, my MacBook Pro's hard drive crashed a month or so back. Luckily, I have been using an external hard drive to back up my computer, so when it crashed, I lost very little in comparisson to some horror stories I've heard.
My Ps was able to retuned to my new hard drive with virtually no problems. However, the error "Could not complete your request because of a program error" shows up in rapid succession 5-10 times after I select the text tool. Interestingly enough, if I weather that storm, I'm able to use all the fonts, actions, etc. with no problems. Originally, it was simply a nuissance that I dealt with, but it's beginning to hamper my work, especially today when I was on deadline.
Doing some research and reading around the web and given the most culpable reason seems to be something wrong with a font, but I don't know which font I'm missing, need to update, whatever.
So here's my question: how do I get this thing to go away? Is there some file or something like that buried in a backup that I didn't bring over to the new hard drive that's causing the problem. At first, I was just happy to have the thing working after the crash, but it's getting pretty annoying.
Any help would be greatly appreciated. Thanks.Well, I don't know which fonts came from where, to be honest. It's kind of a mix of whatever I've done over the past 5+ years, if that makes sense.
I'm perfectly fine deleting all the fonts and reinstalling just the ones needed for PsCS4 if there's a file of that. -
Could not complete your request because of a program error photoshop cs4
My first frustration right now is that I can't search the forums... anyone got an answer to that? on the right hand side (if I'm logged in) I type in a search for anything and it always shows no search results found! Why? is the search function not working?
Anyway, my problem is that when I try to save a multi-layered psd file into psd or jpg I get this error message: "Could not complete your request because of a program error."
What is causing it?
I checked for updates and PS is up-to-date. I restarted, and it worked great for about 3 saves (different pictures). (I'm basically running through some shots and just doing a quick levels and curves adjustment and running an action putting in my name watermark.)
After that quick edit and trying to save - same error message again.
It started suddenly yesterday - after having used PS for about 1.5 years without a problem. I haven't done any changes to it as far as I'm aware.
Any one seen this before, or have a solution to this?
Thanks!
Computer specs:
Windows 7 Pro - 64-bit
12 GB Ram
750 GB OS hdd where PS is installed
2 TB Media drive where the files are being pulled up from/saved to.
Intel i7 x980 3.33 GHz
GeForce GTX 470 with 1280 MB dedicated memory
Logged in as administrator.Did you update or change or plug-in or remove anything else on your computer just before it happened? Photoshop relies on other system libraries to do things and maybe one of those changed.
No, I did not change anything; I was editing pictures - from a quadding trip where they asked me to shoot for them - and suddenly I started getting the message on most pictures.
Hard drives are not nearly full. (.99 TB free on media drive and 588 GB free on OS {C} Drive)
scandisk error check? I probably need that.. (I've had some problems with BSOD and had the BIOS corrupted recently that I had to flash the BIOS again. Could that cause something like this?)
How do you reset preferences? Is it the Ctrl + Shift + Alt key immediately after PS starts? I did that and it didn't fix it.
Saving in odd location? No, I don't think so; I save to the same place I save other stuff and I have a solid directory base and I always follow the same procedures. I save back into the same folder I open the file from and save back to the same filename + "edit". That way I can compare side by side and have a backup copy of the file.
The only USB device plugged into the computer is a logitech wireless combo of keyboard and mouse. (And a wired USB keyboard that sits to the side and that I use only when the batteries in my wireless dies.
I can't think of anything that has changed that would cause PS to act like this.
If I can't get it working soon, I'll re-install. I have the Production Premium CS4 version - can I just reinstall PS or would I have to do the whole suite?
Thanks!
PS. I don't know if I was clear enough on what I'm doing: I open anywhere from 1 - 20 pictures at once, and then do a quick level or curve adjustment and save to a different file name. The confusing thing is - some pictures I have no problem with, but others - even though I do exactly the same thing - this error message comes up. I'd say about half of my 107 pictures from the quadding trip refused to save.
It almost makes it seem like some pictures are corrupt or something - and yet, I'd be really surprised to have soo many corrupted images suddenly. -
Program error message - Photoshop CS4 for Mac
I started to get the message "Could not complete your request because of a program error" a little while back, but it would go away after restarting photoshop, so I wasn't too worried about it. But now I've encountered this one file that won't let me do anything to it. As soon as I open it it pops up with the error message. No amount of clicking makes it go away, and I have to force quit photoshop. Always the same thing. I read up a little about how to fix it but I haven't found anything that works (I tried the file info>copyright idea and deleting Photoshop's preferences, even getting rid of extra fonts, and clearing the library>cache.) Any ideas? I'm not sure what to do!
More info:
It's a psd file.
There are only 2 layers on the files, one is a vector smart image.
I opened the file and was able to edit it fine on a friend's computer, no error messages whatsoever - so it's not a corrupt file. (But that doesn't solve my computer's dilemma.)
Thanks in advance.Hi,
I have this same problem. I use Font Agent Pro and I only have about 50-ish foundry fonts activated. I'm wondering if anyone else has found a fix? The second I open Photoshop I get an error message and I have to force quit, let's not even begin thinking about opening a file.
I'm on OSX 10.6.8, running CS4. This is getting frustrating. I'm considering reinstalling the whole suite, there goes my entire evening. -
Photoshop CS4 program error: deleted prefs, keeps coming back instantly
I am running Photoshop CS4 extended on my Mac OS X 10.5.6 OS. Out of no where, I create a new file, try to fill a layer with a solid color, I get the generic program error message. I click OK to get rid of it, but it is erratic. I have to force quit the program.
I deleted the pref file manually as well as Apple + Option + Shift keys while loading the program and had Photoshop delete it for me.
What other files do i need to delete/reset for this to work properly again?
My computer:
Mac Pro Dual Quad (octo)
12 GB of ram
I pulled up activity monitor and it isn't using much memory.sounds like a bad directory I would run Diskwarrior or disk utility of the OS install DVD
-
Program error sur photoshop cs4
could not complete your request because of a program error sur photoshop cs4 au moment de l'enregistrement
Sounds like it did not install correctly. Uninstall, then reinstall. If that does not help, use the Adobe CC cleaner. It will remove all traces of your Adobe programs. Then do a normal install. If it still is not working, let us know.
-
VOB to AVI using Auto GK Software; But won't perform correctly in CS4
Hello. I purchased Premiere CS4 because someone in the Adobe marketing dept. told me I could get DVD footage into it. For a year now I have been working with it and can get my digital footage into it and work with it fine. I found out after I purchased it that VOB files must be turned into avi files in order to use the footage in CS4. So, I found and downloaded the Auto GK (auto gourdian kot?) free software and successfully converted the files (which are actually my parents priceless 8mm Reel to Reel footage from the 50s-60s that I had transferred to DVD). This R2R footage on DVD is a primary component of the music videos I'm trying to make for them. Anyway, I can watch these 'vob converted to avi' files on my computer (Windows XP, 250 GB hard drive w/ 2 external hard drives, 3 GB RAM...no problem w/computer) AND can import into CS4, but then they don't perform well in CS4...I can only see thumbnail and might play for a second really fast and then stop, or won't play at all, so they are useless in there even though I can import them. I know I have settings wrong somewhere, but don't know if its in CS4, or in the VOB to avi software. Can someone help me? I watched some of the tutorials in the CS4 help section, and one 'teacher' said, "...and if you need to import DVDs, you can do that too." But then he doesn't tell you how to do it and I can't find anything on the subject. Any help will be appreciated. Do other video editing programs make it easier to import DVD footage? My parents are old...I can't wait too much longer...it's been a year I've been trying to do this. Thank you, Claudia Barrington
See:
FAQ: How do I import VOB files / edit a DVD?
You will also find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie
PremiereProPedia
RSS feed)
- Over 350 frequently answered questions
- Over 300 free tutorials
- Maintained by editors like
you
Forum FAQ -
Cs4 quick selection tool program error
When ever I try to use the quick selection tool in photoshop cs4 it gives me a can't complete the request program error.
I have turned off open GL I have the latest drivers. It never did this before. I reset the preferences file more than once. Anyone having this problem or know a fix for it.
Thank you for your time.
Windows XP SP3
duel core processor
3 gigbytes ram
Nvida GE Force 8600GT
256when Photoshop starts acting up it's always a good idea to reset your preferences
http://forums.adobe.com/thread/375776?tstart=0
Maybe you are looking for
-
Using an external hard drive with Airport Extreme
I'd like to use an external hard drive to store movies and music through my Airport Extreme. The drive is connected to a powered usb hub which is connected to the Extreme. I can see the drive in Airport Utility but I can't figure out how to use it.
-
Superdrive: Cd reader and Burner works but DVD's won't read
Hey, anyone have any ideas? My CD burner and player work great, I burn off of it all the time. However if I try to insert a DVD it makes noises, like it's trying to read but spits it back out. I tried resenting it but nothing is working. Anyone have
-
IPhoto 09 loses date on auto-rotated photos
Try that: take an old photo in portrait mode (auto-rotated from a camera, mine is a Canon) from your iPhoto library, drag it to the desktop, and drag it back to iPhoto. The new photo imported has lost its original date, its date is now the importing
-
How do I print a list of albums with all Genres? Skips the classical albums. ?
How do I print a list of all albums and all genres? Itunes skipped Classical albums.
-
ViewObjectImpl never called? NavigationListener HowTo?
Hi, I try to implement add a navigation listener to a ViewObjectImpl but I noticed that the class is never called? JDev 10.1.2 + JClient I have a panel bound to the ViewObject. 3 rows are retrieved I traced my program and when 3 rows are retrieved, t