Program error when opening or saving. Any fixes or workarounds?

I've been having troubles with opening and saving files in Photoshop CC since upgrading to Yosemite. The problem usually occurs when the save or open command is part of an action. I have the latest updates of both photoshop and Yosemite. It sounds like it's a known bug but I'd really like a solution or a workaround. Any suggestions?

Any other suggestions? As I stated in my original post, I have the most updated version of both photoshop and Yosemite. It was the first thing I checked.

Similar Messages

Photoshop CC program error when opening or placing files. VERY FRUSTRATING PLEASE HELP.

I'm an advertising graduate student that relies heavily on Adobe programs for my multiple simultaneous projects throughout the school year, specifically Photoshop, Illustrator, InDesign, Muse, Edge Animate and Premiere Pro.
I'm using a MacBook Pro running OS X Yosemite.
I have been experiencing an incredibly frustrating issue with Photoshop and Muse, both CC 2014. I'll speak about Photoshop in this thread since, well, this is a Photoshop forum. This has been happening for almost a year now. I figured Adobe would've fixed this problem by now, especially given the myriad of crash reports I send.
While working in Photoshop, sometimes when I go to place a file I get an error message that says "Could not complete your request because of a program error." It used to be that this error was fatal and I would have no other choice but to force quit out of Photoshop and restart it. We all know how incredibly time-consuming it is for Photoshop to open (especially 10-15 times in one sitting), and being in grad school, time is not something I have a lot of when I have deadlines and projects due.
This error is still happening and for the same reasons; however, now I can still continue to work on my file, as long as I don't need to open a document or place an image...which doesn't help very much because I'm doing a lot of mockups and composites and need those functionalities. It happens probably 90% of the time when I try to place or open a document.
For the record, it's a similar issue that's causing Muse to crash as well. When I try to add an image file, it causes the entire program to crash "unexpectedly," as Muse so eloquently puts it.
Until recently I had kept CS6 on my hard drive and would dig it out to use in place of CC when PSCC would crash; however, someone told me that having both versions was likely the cause for the crashes. After much hesitation, I finally uninstalled all of CS6 from my hard drive the other day (the right way, not into the trash can, since someone is inevitably going to ask that question) and I'm still having this problem, and now I don't have my CS6 version to fall back on and now I'm in a really bad spot.
I apologize for all the rambling, but I'm really very, very frustrated with this error, and I had to do something while waiting for Photoshop to restart. Someone please help.

MacOS 10.10? Yeah, Apple is working on that bug. They already fixed the crash in the open/save dialogs, but have a few more problems to address with the open/save dialogs.

Program error when opening layer properties

Hi! I have a really difficult problem in Photoshop. Whenever I try to open the layer properties I get the error message "Could not complete your request because of a program error." I tried to fix it but I really don't know what to do. I am working on a huge project and I need this fixed as soon as possible. Thanks!

Please read this and proceed accordingly:
http://forums.adobe.com/thread/419981?tstart=0
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

Video error when exporting from slideshow - any fixes?

When I try to export video from the LR Slideshow module I always get the same error msg:
- Cannot create encoder instance, h264OutVideoNew failed
- error: h264OutVideoChkSettings - no library function available
- error: No encoder library could be found!
Can anyone help me remedy this?
Thanks,
Dennis

There's another thread here discussing the same error message, though not in exactly the same circumstance:
http://discussions.apple.com/thread.jspa?threadID=2212899&tstart=0
Perhaps something in that thread will help you.
Good luck.
Message was edited by: Dave Sawyer

Error when opening itunes : iTunes has stopped working ''A problem caused the program to stop working correctly''. When I repaired damaged files the problem still exists and also after uninstalling and redownloading and installing itunes. I have windows 8

Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
My pc is working with windos 8.
Is there a solution?

Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling

Error When Opening Any Form

Hi All.,
Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
Application:11.5.10.2
OS-----------HP-UX
DB-----------10.2.0.4.0
File Name:
oracle/forms/ui/FLWTextArea
Work Around
Relink the all the files
Regenerated the jar files
Regenerated the forms
f60gen help=y
Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
Forms 6.0 (Form Compiler): Release - Production
(c) Copyright 1999 Oracle Corporation. All rights reserved.
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Metalink Doc id
java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

Thanks,
From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
Here is an example:
If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
Enter value for bug_number: 9935935
old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
new 1: select bug_number from ad_bugs where bug_number='9935935'
no rows selected
SQL>

Just upgraded to OSX mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

Just upgraded to OSX 10.9 mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

I'm getting an error message "There was an error when opening this document. Access denied" on some PDF's that I was able to open in past. Uninstalled XI and installed X but same problem. Any thoughts?

I'm getting an error message "There was an error when opening this document. Access denied" on some PDF's that I was able to open in past. Uninstalled XI and installed X but same problem. How can I access these files?

I have exactly the same problem. The interesting thing is that the file opens when I attach it to an email and open it out of the email. I already saw the advice you provided in similar post from Aug last year and checked the security settings of the file and the folder. But according to that I have all rights.
My OS is Windows 7 Enterprise.

Windows 7: CS6: Getting a Program Error when flipping foreground and background colors

Yesterday, I started getting an error when trying to set the default colors and then flipping them. I also get a program error when I try to click on the foreground color and manually assigning it with white.
This is a Windows 7 Ultimate, with PS CS6.
I closed the program twice and ran into the same problem, then rebooted and got the same errors. As far as I can tell, this is the only tool or feature acting up, other than the actions which have this step in them.
Looking for an easy fix first, of course. Like maybe deleting the Prefs file? Mac people seem to have to do that regularly.
But, if nothing works, will I need to uninstall PS and reinstall it? Would that also mean I'd have to install all of my filter packages again, too?
Thanks in advance,
M. Jackson

Noel,
To date, I have only restarted PS, and only rebooted and restarted PS.
I have not done any other steps. I am open to anything that keeps me from having to reload, mainly because of all of the filters, presets, actions, and so forth I'd have to find to reload from scratch.
And, please note, I am on a PC. The Command-Shift-Option is a Mac command. I assume, on a PC that would be Control-Shift-Alt?
Thanks again,
Mike Jackson

Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679

Hi,
We update the BW landscape for version 7.4 suppport package 4 (whitout HANA).
We use a external system connection to extract data from a SQLServer database (Microsoft Connector 1.1 for SAP/BW)
In the previous version (BW 7.0.1 SP 10) run correctly, but now is in error.
Below the BW error log:
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system SQLIS.
Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Transaction program not regist).
Error log of Integrations Services
[SAP BI Destination 1 [476]] Error: Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException: An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
em Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceBWLoader.ProcessInput(Int32 inputID, PipelineBuffer buffer)
em Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SAP BI Destination 1" (476) failed with error code 0x80131500 while processing input "SAP BI Destination Input" (491). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I checked the topic and notes below, but without success
CPIC Return Code 679 - Transaction Program not Registered - ABAP Connectivity - SCN Wiki
Note 1480644 - gw/acl_mode versus gw/reg_no_conn_info.
Note 353597 - Registering RFC server programs
Regards,
Bruno

Hi Bruno,
We were able to resolve the issue. SAP RDS is assisting us with our upgrade and one of their consultants gave us this fix/workaround.
Edit and add an entry into P:\usr\sap\<SID>\DVEBMGS00\data\reginfo.dat on your BW host server.
Below is the entry I added.
P TP=<NAME OF PROGRAM ID> HOST=<remote hostname where you creating the RFC to> CANCEL=<remote hostname> ACCESS=*
P TP=CTSAPNPSCI_PORTAL_FPS HOST=ctsapnpsci CANCEL=ctsapnpsci ACCESS=*
Then in BW system goto smgw > goto > Expert Funtions > External Security > ReRead ACL (N) & Globally
I hope that this works for you.
Regards
James

Error When Opening Document

I receive the following error when opening a Web Intelligence Document, no matter the user.
Cannot initialize Report Engine server. (Error: RWI 00226) (Error: INF )
I also cannot run any reports. Anyone have an idea? I cannot seem to find any information in the knowledgebase on that error.

Phasenjager,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Outlook 2010 gives error when opening a PowerPoint attachment.

Outlook 2010 gives error when opening a PowerPoint attachment.
Hi All,
We have several VIP employees that are getting the following error on all PowerPoint documents that come as attachments from Outlook.
I have researched and tried the following steps and verified these settings are already applied.
I did find a work around but not a fix and our security team will NOT allow me to change this setting however if I uncheck the setting all employees can open the outlook attachment.
Any other ideas on a fix for this if I am unable to uncheck Enable Protected View.

Hi Matthew,
This is a perennial problem, here is a thread which has a deep discussion about this issue:
http://social.technet.microsoft.com/Forums/office/en-US/07f710a5-a6ca-4256-8f27-6aac41a6b37e/outlook-2010-unable-to-open-word-excel-and-power-point-attachments-from-an-email?forum=outlook
It looks like nobady really find a solution there, the only workaround is what you have found - change the protected view setting in Trust Center. You will lose some security by doing this but it seems to be the only solid solution currently.

CF 8 CFPDF "Merged" document throws 131 Error when opened in Acrobat

We are using CF 8 on Windows Server 2003 platform.
Any CFPDF "Merged" documents are throwing 131 Errors when opened in Acrobat
Tried re-saving the documents on local machine and still same problem. Tried opening in multiple versions of Acrobat, same problem.
Individual documents created are opening without issue. It is Only when these documents are merged that this error occurs.
We do not experience this behavior in our CF 10 environment.
We are a Big, Slow moving enterprise here so not much chance of getting our CF 10 environments promoted to meaningful production use soon.
Found virtually nothing in HelpX and nothing online of any value regarding this issue.
Has anyone else experienced the issue noted in the title of this discussion?
Has anyone a work around or solution?

I am getting the same error even in Acrobat version 8.1.3.
Additionally, I noticed that if we click on menu ‘Advanced->Sign&Certify->Preview Document’, then we get a notification as “This document is not PDF/SigQ compliant and may display inconsistently”. On clicking ‘View report’ on that notification, the below dialog pops up. It has errors listed as:-
Code 4000 : Unrecognized PDF content. The document contains PDF content or custom content not supported by the current version of Acrobat.
Code 4002: PDF content contains erros.
However, if we sign the PDF using default adobe signature functionality and reopen that PDF, the error does NOT come and the notification also says ‘This document is PDF/SigQ compliant’.
Can anybody please suggest what could be missing in the custom sign that we apply? Is it because of any of the missing fonts or any other resources?
Awaiting reply!
Regards.

Win32 exception error when opening file from RH6 in RH7

I received the following error when opening a help file
(.xpj) that was developed in RoboHelp 6 in RoboHelp 7:
An unhandled win32 exception error occurred in RoboHTML.exe
[4692].
This occurred after receiving the notice to upgrade the
project since it was created in an older version. After selecting
Upgrade, I received a runtime error message prompt. After clicking
OK, I received the message above.
Does anyone know how to resolve this issue so that I can open
the project without any problems in RH 7?

Thanks a lot for replying.
waldemar.hersacher wrote:
I have Acrobat Reader 5.1 at home and 6 at work and both work fine with the LV 7.1.1 bookshelf and help file.
Yep, I just uninstalled Adobe Reader 7.0 and installed version 6.0.1. The links now work perfectly, so evidently this is a problem with Adobe Reader 7.0. I'd still like to solve the problem, though, as I really like version 7.0. (Something has finally been done about the program's lengthy start-up time!)
You can reach the PDF-Files also by using Help>>Search the LabVIEW Bookshelf. Does this link work for you?
It works perfectly.
javascript:AcrobatLink('../manuals/lvuser.pdf');
This is a call to a java script function located in pdf.js.
Other reasons:
The Active-X control of Reader 7 has a bug.
Your Internet security settings will not allow this operation. The Active-X will be loaded but will have no access to the file and yo get a wrong error message.
Fair enough. If that is indeed the case, which Internet security setting should I try changing? I haven't done anything unusual to any of those settings. And where is pdf.js located? I tried searching for it but could not find it.
Your advice is greatly apreciated.

Javascript error when opening CS3 on pc..?

I cannot open ID on my CS3 package using my pc. The error appears twice in a box on screen stating
'JavaScript Error'
'Error Number 45'
'Error string :Object is Invalid'
'Line 387'
also
'JavaScript Error'
'Error Number 45'
'Error String; Object is Invalid'
'Line 428'
there was a problem initially due to program plug-ins reported missing so i tried going onto 'Help' and clicking on 'Configure Plug-Ins' from the drop down menu.
Not sure what i did.. but now i cannot use ID as it shuts down after the javascript errors are reported.
Anyone help?

hi
thanks for all the helpful info
i tried to reinstall INDESIGN only... didnt work same problem.
i tried by uninstalling INDESIGN and then reinstalling it only.... didnt work same problem.
I guess im going to have to do a full reinstall.. not a problem, do i need to contact yourselves to get clearance for a reinstallation?
I had a hard drive crash about 6 months ago and had to reinstall, had to phone Adobe and get an online clearance as id exceeded my sole installation for my CS3 hard copies.
thanks again
Date: Sat, 2 Jan 2010 09:50:57 -0700
From: [email protected]
To: [email protected]
Subject: Javascript error when opening CS3 on pc..?
I'd bet the original scenario was something like you tried to open a file and saw a message that you were missing plugins, or they were out of date, and that you should update or upgrade. That's the typical message you get when you try to open a file saved from a newer version of ID. Unfortunately it's quite misleading -- nothing you do to the plugins will help you in that case, and trying to use newer versions would be disastrous.
You should be able to selectively reinstall just ID. If you have the DVD you can run the installer and do a "Repair" installation, and if that doesn't work, you should be able to uninstall ID, then reinstall without removing the whole suite. If that still doesn't work, bite the bullet, uninstall everything and run the clean script (http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402767&sliceId=1), then reinstall. I'm not sure what happens with a downloaded installer, but I suspect it works the same. I'm pretty sure I read somewhere that to uninstall from a download you need to have it in the same location as was originally used for the installation.
Peter
>

Program error when opening or saving. Any fixes or workarounds?

Similar Messages

Maybe you are looking for