Program for find and replace a string in all the reports in a package

Hello experts,
Is there any standard report or transaction provided by SAP which can be used to find a String in all the program in a package ?
As per my knowledge there is a program RPR_ABAP_SOURCE_SCAN which can search for a string in a package but this program doesnot support the replacement .
Any clue in this regard will be helpful.
Thanks
Vivek

Vevek, you are searching for something very very destructive.. do you realize that?
its better if you could explain us the requirement, by the way for a automated change you need to have INSERT REPORT called inside some program, so start searching that line if you can get it
else, write a piece of code for it..

Similar Messages

How to find and replace any string between " "

Hi everyone,
Here my sample
String szTest;
szTest = "Yellow banana";
szTest = "Blue monkey";
szTest = "Red mango";
szTest is only needed when it's in testing progress. Now I want to put all of that in the /*comment*/ so the released program won't run those code any more (but still keep szTest so I can use it for future develop testing).
So Here what I want after using the Find and Replace Box:
//String szTest; //Manual
/*szTest = "Yellow banana";*/ //use find and replace
/*szTest = "Blue monkey";*/ //use find and replace
/*szTest = "Red mango";*/ //use find and replace
I think I can do this with Regular expressions or Wildcards. But I don't know how to find and replace any string between " and ".
Find: szTest = " ??Any string?? ";
Replace with: /*szTest = " ??Any string?? ";*/
Thanks for reading.

Hi Nathan.j.Smith,
Based on your issue, I suggest you can try the Joel's suggestion check your issue again. In addition, I find a MSDN document about how to use the Regex.Replace Method to match a regular expression pattern with a specified replacement string,
maybe you will get some useful message.
https://msdn.microsoft.com/en-us/library/xwewhkd1(v=vs.110).aspx
If the above suggestion still could not provide you, could you please tell me what language you use to create the program for finding and replace any string using regular expression so that we will find the correct programming develop forum to support this
issue?
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Find and Replace text string in HTML

Opps... I hope this forum is not just for Outlook. My Html files reside on my hard-drive. I am looking for VBA code to open specified file names ####File.html and then find and replace text strings within the html for example "####Name" replaced
with "YYYYY"
I drive the "####File.html" names and the find and replace text strings from an Excel sheet. I am an artist and this Sub would give me time to paint instead of find and replace text. Thank you!
[email protected]

Hello Phil,
The current forum is for developers and Outlook related programming questions. That's why I'd suggest hiring anybody for developing the code for you. You may find freelancers, for example. Try googling for any freelance-related web sites and asking such
questions there.
If you decide to develop an Outlook macro on your own, the
Getting Started with VBA in Outlook 2010 article is a good place to start from.

[Forum FAQ] How to find and replace text strings in the shapes in Excel using Windows PowerShell

Windows PowerShell is a powerful command tool and we can use it for management and operations. In this article we introduce the detailed steps to use Windows PowerShell to find and replace test string in the
shapes in Excel Object.
Since the Excel.Application
is available for representing the entire Microsoft Excel application, we can invoke the relevant Properties and Methods to help us to
interact with Excel document.
The figure below is an excel file:
Figure 1.
You can use the PowerShell script below to list the text in the shapes and replace the text string to “text”:
$text = “text1”,”text2”,”text3”,”text3”
$Excel
= New-Object -ComObject Excel.Application
$Excel.visible = $true
$Workbook
= $Excel.workbooks.open("d:\shape.xlsx")
#Open the excel file
$Worksheet
= $Workbook.Worksheets.Item("shapes")
#Open the worksheet named "shapes"
$shape = $Worksheet.Shapes
# Get all the shapes
$i=0
# This number is used to replace the text in sequence as the variable “$text”
Foreach ($sh in $shape){
$sh.TextFrame.Characters().text
# Get the textbox in the shape
$sh.TextFrame.Characters().text =
$text[$i++]
#Change the value of the textbox in the shape one by one
$WorkBook.Save()
#Save workbook in excel
$WorkBook.Close()
#Close workbook in excel
[void]$excel.quit()
#Quit Excel
Before invoking the methods and properties, we can use the cmdlet “Get-Member” to list the available methods.
Besides, we can also find the documents about these methods and properties in MSDN:
Workbook.Worksheets Property (Excel):
http://msdn.microsoft.com/en-us/library/office/ff835542(v=office.15).aspx
Worksheet.Shapes Property:
http://msdn.microsoft.com/en-us/library/office/ff821817(v=office.15).aspx
Shape.TextFrame Property:
http://msdn.microsoft.com/en-us/library/office/ff839162(v=office.15).aspx
TextFrame.Characters Method (Excel):
http://msdn.microsoft.com/en-us/library/office/ff195027(v=office.15).aspx
Characters.Text Property (Excel):
http://msdn.microsoft.com/en-us/library/office/ff838596(v=office.15).aspx
After running the script above, we can see the changes in the figure below:
Figure 2.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thank you for the information, but does this thread really need to be stuck to the top of the forum?
If there must be a sticky, I'd rather see a link to a page on the wiki that has links to all of these ForumFAQ posts.
EDIT: I see this is no longer stuck to the top of the forum, thank you.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

What's the best approach/program for finding and eliminating duplicate photos on my hard drive?

What's the best approach/program for finding and eliminating duplicate photos on my hard drive? I have a "somewhat" older version of iPhoto (5.0.4), and it doesn't seem to offer anything like that except during the importing phase of syncing my phone...

I wonder, is there room to transfer them to your phone, & then back to filter them?

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
Dave

Hi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave

Using applescript for Find and Replace All in Pages 2.0

i saw that Pages 2.0 is scriptable
i try to create a script for merge use to find and replace all occurence of a certain string using a script but Pages doesn't seems to respond to "Find" even using "System Events"
how can i do to use this function with a script
Thanx for any help
S.B.
ibook G3 Mac OS X (10.4.6)

OK, here's another example. This one gets the text as a string and uses the offset property to find "[", presuming it to be a merge delimiter. (Pages' text doesn't support "offset of").
One failing of this scheme is that the offsets are incorrect if you have inline objects (pictures, shapes, tables, etc.). While it is probably possible to compensate for them, that's a trickier proposition.
<PRE>-- Example merge replacements:
property mergeText : {"[name]", "John Smith", "[address]", "1234 Anystreet"}
on lookup(mergeWord)
set theCount to count of mergeText
repeat with x from 1 to theCount by 2
if item x of mergeText = mergeWord then
return item (x + 1) of mergeText
end if
end repeat
-- If merge field is not found, delete it (replace it with the empty string)
return ""
end lookup
tell application "Pages"
repeat
tell body text of document 1
-- Get text as a string so that "offset of" can be used.
set allText to it as string
set startOffset to offset of "[" in allText
if (startOffset = 0) then
exit repeat
end if
set endOffset to offset of "]" in allText
select (text from character startOffset to character endOffset)
end tell
set mergeWord to contents of selection
tell me to lookup(mergeWord)
set replacement to result
set selection to replacement
if (replacement is "") then
-- Get rid of extra whitespace (space or return)
-- Do it in a "try" block to handle edge cases at start or end of text.
try
set theSel to (get selection)
set ch1 to character before theSel
set ch2 to character after theSel
if ((ch1 is " " or ch1 is return) and (ch2 is " " or ch2 is return)) then
select character after theSel
delete selection
end if
end try
end if
end repeat
end tell</PRE>
Titanium PowerBook Mac OS X (10.4.6)

Is it possible to find and Replace a string inside a textfile using JSP?

FileInputStream fs = new FileInputStream("/opt/Abhishek/software/tomcat/webapps/AMS/listpass");
DataInputStream in1 = new DataInputStream(fs);
while (in1.available() !=0)
String str1=in1.readLine();
StringTokenizer st1 = new StringTokenizer(str1);
String node=st1.nextToken();
if (node.equals(sports))
String pass=st1.nextToken();
out.println ("<b>"+sports[i]+" <b>");
out.println("**Your Required Password**");
out.println(pass);
out.println("<br></br>");
%>
Hi ,
I have a text file (named listpass in the above code) inside tomcat-webapps folder containing a node name and its password.You could see the path of the text file at the starting line of the code.The Scene behind the program is once the particular node is clicked the password is retreived for the user against the particular node.What i would need is to change the password in the text file once it is retreived. So i would need to find the password that is retreived recently and change that one with a randomnly generated new password in the text file.
So can i do this?Is it possible to search for the string in the text file and replace that with a new one using JSP.For your note i am running all my HTML amd JSP inside the same folder where i have the text file in which the string has to be replaced .
Could anyone give your comments on this please?

Nasty in so many ways.
First off you shouldn't be doing stuff like this in a JSP. JSPs should just build HTML, use a Servlet and then pass data to a JSP for formatting.
Web applications are multi-threaded, so you have to consider what happens if several of these transactions come in at the same time, each trying to change the same data file.
It's not practical to amend text files in place, generally you have to create a new version of the file for each change because if the size of a password changes the subsequent bytes of the file would all need moving.
Use a database. Databases are designed to deal with these issues and there are perfectly good free ones around like Derby, MySQL and H2.

Find and replace string in file

hi,
i need to find and replace text (string) data in about 100+ files, i've decided to write a small java program to do it but i'm stuck on how to replace.
here is what i'm heading towards:
class ReplaceString {
BufferedReader in;
BufferedReader os;
public static void main(String args[]) {
    ReplaceString obj = new ReplaceString();
    obj.replace();
   void replace() {
     try {
       in = new BufferedReader(new FileReader("a.txt");
       os = new BufferdWriter(new FileWriter("a.txt");
       // read until end of file
       String currentLine = new String();
       while((currenLine=is.readLine()) != null) {
         // if matching text then replace????
         if(currentLine.equals("Version 001") {
            // how to now replace the Version 001 with Version 002???
     }catch(IOException e) {
        System.out.println(e);
        in.close();
        os.close();
     in.close();
     os.close();
}the above code i just typed so there might be errors, but looks ok to me, is there any way once i find the string i want to replace, to replace the string with another string. basically i want to replace all occurrences of the text "Version 001" with "Version 002"
Thank you.

Is it always true, as in your example, that the replacement is the same length as the existing string? If so, this one's easy.
Is it also true that you don't need to worry about 16-bit chars? (Again, as in your example.) If you're using just ASCII characters, this gets easier still.
1) Segregate the file I/O from the search/replace process.
2) Main becomes:
readFile();
replace( "this", "that" );
writeFile();Use a byte array buffer, defined in your main class. Fill it via the readFile() code. Use a RandomAccessFile, check its length() to allocate your byte array, then do a single read() to fill the buffer.
A brute force search will certainly work: scan for the first search character, then check the rest for a match, replace if you've got a match and continue scanning. Alternative if your file's aren't too big: create a String from the byte array:
// buffer is a byte array
String s = new String( buffer );And use the String.replaceAll() to do the search/replace. Recover the buffer with:
buffer = string.getBytes();A single write() and close() should handle the remaining work.

How to find and replacing the path (url) given for data binding from type 'datasocket'

Hi everyone,
I'm sorry to pose this question as my own knowledge is still very limited.
I have an assignment (bachelor level). We were asked to adjust a plc program in step7 so that multiple of an existing sequence could be run indepently.
The settings for that sequence are controlled by labview. Sensor data is also viewed in labview.
There is an existing labview VI that was made by someone else before us. It uses 'Datasocket' type for data binding. Because we would like to adjust this VI to be used with the other sequences, we would like to change the original path or URL quickly, as in a 'Find&Replace' solution. Yet the find and replace only works for objects or text, not entries in the properties.
Can someone please tell me if there is a way to do is, without having to use shared variables, as we are not at all known with this type.
Many thanks,
Niels

Dear Niels,
Please find the attached example. I placed 5 controls on the front panel, all with a data socket URL (control 1 = URL1, control 2 = URL2 etc). Through property nodes I did the following;
- I got a reference to the front panel
- with this reference we can get an array of references to the controls on this front panel
- one by one we will read the references and check the data socket URL from the control, we compare this with the URL we are searching
- if found, stop we will use the reference to write a new URL to the control.
Please notice the default values of the controls; it is set to search for URL3 and replace this with URL10, run the VI once and you will see that happening. I also included a sting indicator which will show you the label of the control which we find. Also a Boolean indicator in case we were not able to find the URL.
I downsaved the VI to 8.6, I'm not sure in which version you are working, if you have 8.6 or higher you are able to open it. Hope this brings you further,
Best regards,
Martijn S
Applications Engineer
NI Netherlands
Attachments:
findURLexample.vi ‏12 KB

How can i find and replace xml tags?

Hi, i am using xml in my workflow and want to be able to remove certain tags if they contain particular text.
here is an example of my xml structure…
<entry>
    <name>DEFAULT</name>
    <tel>DEFAULT</tel>
    <address>DEFAULT</address>
</entry>
I am using this initial structure to set the paragraph styles to be followed when the xml data is imported.
This leaves DEFAULT in place wherever an entry doesn't have any content for that field.
I want to be able to import my XML then run a script that removes any tags that include DEFAULT, - I need the entire xml tag to be removed not just the text, if i do a normal find and replace it will only remove the text not the tags which is causing problems with styling. I also want to remove the end of para/return (^p) that i've placed at the end of the line. So it would be the same as opening up story editor and removing the content + tags + hard return in there, but i want to automate the process…
So i think this is what i need to search for in each case
"<name>DEFAULT</name>^p"
and i want to replace it with nothing ""
Can this be done through scripting (ideally javascript)?
I have a little knowledge of javascript but am not sure how to search and target that kind of string in indesign...
using indesign cs5
many thanks

Hi,
Script should do it in two steps:
1. find all occurences of i.e. ">DEFAULT<"
2. remove whole paragraph which is a found_text's container.
For example this way -JS - (a textFrame filled with your text should be selected) :
var mStory = app.selection[0].parentStory;
app.findTextPreferences = null;
app.findTextPreferences.findWhat = ">DEFAULT<";
var myF = mStory.findText();
var count = myF.length;
while (count--)
     myF[count].paragraphs[0].remove();
rgds

Dreamweaver cs3 international edition crashes while "Find and Replace"

When i try to perform Find and Replace in Adobe Dreamweaver CS3
the program halts and crashes everytime.
aditional info:
Adobe Dreamwever CS3
international version (translated GUI)
Version 9.0 Build 53
Windows Vista
Pentium Core2duo 2gb ram
best wishes..
ozgur z

Mr David Powers thank you for your quick,
sorry to say but
the link did not work for me.
i am so ashamed to use a program that crashes while doing a simple "search and replace" action! which i had paid more than 900$.
and also it is so interesting that adobe has released new version CS4 instead of updating the buggy CS3. so the ppl who bought CS3 are dumped!
here i attach the crash error dump file that Dreamweaver creates in its configuration directory.
http://rapidshare.com/files/230314270/Dreamweaver_crash_log.mdmp
i hope it helps to diagnose and SEARCH and REPLACE the BUG.
best wishes
o.z.
edited by: OzgurZ (inserted the rapidshare link for the dump file)
Message was edited by: OzgurZ - NOT answered yet.

Find and Replace Subscript

Hi,
I am trying to figure out how to find and replace subscripted characters, e.g. H2O (with the "2" subscripted). How is this done?

Yeah, it has two options. Use formatting (e.g., subscript, but also font, weight, size, leading, colour and whatnot) or do not use formatting -- which does not help, as it is the same as your search string ...
But fear not. If your "H2O" is the only one, you can do this -- what Peter meant with his two-step.
1. Search for "H2O" and replace it with "H[ha!]O". Be sure to check both "whole word" and "case sensitive" icons below the replace field. Every "2"
i inside
a text "H2O" will be replaced by something unique -- that's what the "[ha!]" should be.
2. Replace "[ha!]" with "2".
i Uncheck
"whole word" and "case sensitive" (because elsewise it won't find anything), and in the Replace Formatting field, select "Subscript" in the Type panel. This 2nd time, you are only replacing the unique string that was put into its unique position in the previous step.
A 2nd option (one that I don't recommend to freshmen!) is to use the GREP Find-and-replace. This is, in the right hands, an extremely powerful tool, which can
i search
for "H2O" and
i change
just the "2" part. If I only knew how, off the top of my mind! But, it's neither an easy to remember shortcut, nor perfectly logical, and the 2-step method is.

Batch-find-and-replace.jsx

Hi there, I wrote a batch-processing script for find change queries and thought I share it with you. You can get it over here
You can process GREP, TEXT, GLYPH and OBJECT searches.
Purpouse
While creating books in InDesign with several documents we always come across some find change queries that need to be used again, and again, and again. To make this process easier you can just grab their names and put them into a list. The script will than try to process all your queries in one click.
prerequisites
make sure you have a toml file.
make sure the toml file is next to the script.
make sure the toml file has the right formatting (see below in section TOML)
if you want the script to autoexecute (without toml file selection), make sure the .toml file has the right name: "batch-find-and-replace.toml"
make sure your fcqueries work right
Usage
Place the script and the toml file into your Scripts Panel Folder
define some find and change queries and save them via the InDesign dialogue.
get the xml file names and add them to the "batch-find-and-replace.toml" file in the right spot. text search goes into text.files = [], grep search goes into grep.files = [] and so on. Make shure to remove the .xml from the filename. You can find these files on:
Mac OS Users[username]\Library\Preferences\Adobe InDesign[Version][Language]\Find-Change Queries[query type]
Windows XP Documents and Settings[username]\Application Data\Adobe\InDesign[Version][Language]\Find-Change Queries[query type]
Windows Vista and Windows 7 Users[username]\AppData\Roaming\Adobe\InDesign[Version][Language]\Find-Change Queries[query type]
the .toml file should be located next to the script file and have the appropriate name (batch-find-and-replace.toml). If so the script wont ask for the toml file and process the data right away. If not the script will ask you to select the .toml file.
Thats it. Watch the magick happen.
TOML
Tom's Obvious, Minimal Language is a simple markup language that makes settings human readable. It is still in development and may change a lot. But still. It is a pretty easy language and can be learned by anyone.
The basic toml filer looks like this:
# these are the basic settings
# the MUST be there
do_text = true
do_grep = true
do_glyph = true
do_object = false
# now the file names
# they have to be in one line
# the toml specs say you can break lines in arrays
# but the toml.js does not allow that at the moment
[text]
files = ["my_first_text_find_and_change","another one"]
[grep]
files = ["somegrepsearch", "find tabs", "something else"]
[glyph]
files = []
[objects]
files = []
MUST HAVE Settings
With the do_text, do_object, do_grep and do_glyph you can define if the script should do the corresponding find and replace. Set them to true or false.
CAN HAVE Settings
In the [text],[grep],[glyph] and [objects] areas you can define the filenames that should be processed. Make sure the filenames are written right. If there is a file mentioned that does not exist the script will throw an error. It will try to process all the .xml files it can find.
!IMPORTANT! you MUST remove the .xml from the filename in the list as shown above.
The Script is here --> https://raw.github.com/...find-and-replace.jsx
The basic .toml file here --> https://raw.github.com/...ind-and-replace.toml
The Readme here --> https://github.com/...lob/master/README.md
And the whole package here --> https://github.com/...e/archive/master.zip

Great script, it worked perfectly with grep, text, glyph, not only worked with OBJECTS, because I do the same operation and does not work. Can you give me a hand? Thank you.
In arquivo.toml is thus:
# These are the basic settings
# The MUST be there
do_text = true
do_grep = false
do_glyph = false
do_object = true
do_all_docs = false
# Now the file names
# They have to be in one line
# TomL the specs say you can break lines in arrays
# But does not allow the toml.js que momento
[text]
files = ["_OVER_BLACK_TXT", "_OVER_CORPROF_TXT"]
[grep]
files = []
[glyph]
files = []
[object]
files = ["_OVER_BLACK_FILL", "_OVER_BLACK_STRK"]
This is the image of the Scripts Panel folder:

Multiple Find and Replace

I have a set of 8 Find and Replace Settings in DW that I need
to perform on one file all the time. I don't know of any way to get
them all to run at the click of a button. These actions won't
record in the command recorder.
Is there a way to write an extension that would perform these
Find and Replace Commands at one click?
Can someone please help me with this extension?
Also if there is a way for me to make each of these find and
replace settings a button in the object panel it would be ok also,
that way I can choose which ones I want to perform.
Thanks in advance.

I have a set of 8 Find and Replace Settings in DW that I need
to perform on one file all the time. I don't know of any way to get
them all to run at the click of a button. These actions won't
record in the command recorder.
Is there a way to write an extension that would perform these
Find and Replace Commands at one click?
Can someone please help me with this extension?
Also if there is a way for me to make each of these find and
replace settings a button in the object panel it would be ok also,
that way I can choose which ones I want to perform.
Thanks in advance.

Program for find and replace a string in all the reports in a package

Similar Messages

Maybe you are looking for