Program icon shows up in hard drive, also in application folder.

O.k. Here's what happened. Dictionary accidentally was sent to trash from my dock. I dragged it out of my dock to my desktop. From there I dragged it to my Macintosh HD icon. When I double click on my mac hd icon, dictionary shows up between the developer and library folders. From there, I dragged the dictionary icon up to the applications folder. It said it was sending a copy of dictionary to applications folder. So now I have dictionary in my applications folder, where it should be. But I still have the one between the developer folder and library folder, which I'd like to get rid of. Can I just send that one to trash and delete it, or will that delete dictionary altogether? Thanks for the help.

Thanks for the feedback. Sorry about the Packers (old Chicago boy, here). Good computing.

Similar Messages

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drvie to die before i use the other drives

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drive to die before i use the other drives? Or, what is the best way to handle this?

I do not know what you are waiting for.
I'd make a backup of your important stuff before cloning the entire disk.
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!

Is it possible to open a program when connecting an external hard drive?

Is it possible to open a program when connecting an external hard drive?
I have a external hard drive with an iphoto library. I just want to connect my drive and automatically see iphoto open! Possible?
I know there are some action scripts, am i right?

Ok, here are the steps to take. Doing this involves generating two scripts, the first of which will have the system monitor the attachment of a hard drive, and the second which will conditionally open iPhoto. To make these and set them up, perform the following steps (it is a little involved, but will get you the result you want):
Script 1: A launch agent to monitor attached hard drives
1. Open the Terminal utility in the /Applications/Utilities/ folder. Then copy and paste the following command into it and press Enter, which will open up an editor program in the Terminal:
pico ~/Library/LaunchAgents/iphotodrive.plist
2. Now copy and paste the following text to the Terminal window in its entirety so it is all entered into the Terminal editor:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>Label</key>
          <string>local.iPhotoDrive</string>
          <key>QueueDirectories</key>
          <array/>
          <key>WatchPaths</key>
          <array>
                    <string>/Volumes</string>
          </array>
          <key>ProgramArguments</key>
          <array>
                    <string>/Users/USERNAME/Library/iphotodrive.sh</string>
          </array>
</dict>
</plist>
3. Use the arrow keys to navigate your cursor down to the place where it says /Users/USERNAME/Library..., and change the text of "USERNAME" to be the same name as your account home folder. For example, my login name in OS X is "tkessler" so my home folder is also "tkessler," so for me this is what should go in place of "USERNAME" in the text above.
4. Now press Control-O to save the file, and then Control-X to exit the editor (use Control, and not the standard Command key here).
Script 2: A shell script to open iPhoto when your drive is attached
1. Type (or copy and paste) the following command in the same Terminal window to make the second script in the same editor:
pico ~/Library/iphotodrive.sh
2. Now copy and paste the following text into the Terminal editor:
#/bin/bash
if [ -d /Volumes/"IPHOTODRIVE" ]; then
        open -a iPhoto;
fi
3. Again use the arrow keys to navigate, and edit the text IPHOTODRIVE to be the exact name of the drive you would like to spur iPhoto to open. The name will be case-sensitive, and spaces are OK within the quotes.
4. Again save this file by pressing Control-O, then press Control-X to quit the editor.
5. Next ensure this new script can be run, so to do this now copy and paste the following command:
chmod +x ~/Library/iphotodrive.sh
Now to activate these scripts you can log out of your account and log back in, and they should work as expeted, and will launch iPhoto only when a drive named "IPHOTODRIVE" (or whatever you edited this entry to be) is attached to the system. This procedure will create two files at the following locations on your computer, so to undo it simply remove these two files followed by logging out and back in, and you should be good to go:
/Users/USERNAME/Library/iphotodrive.sh
/Users/USERNAME/Library/LaunchAgents/iphotodrive.plist
If you run into any problems, then write back here and we can figure out if there are any nuance details to cover for your setup.

How can i make apple tv 3 store all my purchased movies and tv shows onto a hard drive somewhere in my house

Currently my apple tv 3 downloads movies/shows when I want to watch them. I'd prefer if it downloaded everything already and it is all available locally without having to download gigabytes from the internet.
Q: How can i make apple tv 3 store all my purchased movies and tv shows onto a hard drive somewhere in my house?
a) Impossible
b) Link my apple tv 3 to a computer running itunes
c) Link my apple tv 3 to my Apple Time Machine
d) purchase an external USB drive and plug it directly to the apple tv 3
e) purchase a NAS drive and configure the apple tv 3 to use it
f) [your answer here]
Thank you,
Chris

Hi! Dwagner, once again ...
I've just got my Mac last friday ... i'm still getting amazed with this new world to me ... eehe .. quite different ... but
... "i can do it, i can do it" eheeh
i'm in that period that a new question appears at almost every mouse click ... lol
so ... can you help me (once again) ..
you said you had your hard drive with this settings...
"You can partition for OSX (extended Journal) - read/write by only OSX or read only by Windows via BootCamp
You can partition for Windows (NTFS) - readable by only Windows
OR - you can format with ex-FAT and this is read/write capable for both operating systems."
how did you formated the partition in NTFS ? ... on the mac? using the "disk utility" ? or did you use another program to do so ...?
i hope i'm not "bugging" you ... this might be a silly question for most of people ... but right now ... it's a major question for me ... ehehe
once again Obrigado (Thank You)
Rui from Portugal

HT201250 Circle and cross through iTunes icon afte the seagate hard drive replaced and restored data from time machine backup.

Circle and cross through iTunes icon: had the seagate hard drive replaced and restored data from time machine backup. Why does the iTunes icon have a circle and cross through it? As though incomplete? tried everything and still Circle and cross through iTunes icon.

No it isn't something you'd find on the computer, it has to be custom installed from the 10.6 installer disc or Software Update if it wasn't before. It allows you to use older PowerPC applications on your Mac. On the other hand double check the version of iTunes you have does not require 10.7 minimum either.

I have a Macbook Pro that I have just renewed and transferred over my old hard drive (also from a Macbook Pro). Now when I turn on the computer and ITunes opens I get error (-50) and then error 5002 when I try to sign in to ITunes Store - Help!

I have a Macbook Pro that I have just renewed and transferred over my old hard drive (also from a Macbook Pro). Now when I turn on the computer and ITunes opens I get error (-50) and then error 5002 when I try to sign in to ITunes Store - Help!
My dealer has tried and failed (twice) to correct this and I have tried deleting the two items in the Itunes folder but no luck!

were you able to get help on this? I need help on error 5002 as well. thank you

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

My Adobe programs were deleted as my hard drive was replaced. I still have the serial number but each time I try to re-download it says the serial number is not valid.

My Adobe programs were deleted as my hard drive was replaced. I still have the serial number but each time I try to re-download it says the serial number is not valid.

Error "The serial number is not valid for this product" | Creative Suite
http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

Can't get Solaris 8 to show my second hard drive.

I installed Sol8 on a 1 hard drive intel machine (as the only OS, no windows). Later, I added a second hard drive, and after running the device config assistant (DCA) still doesn't show it in the list of drives under the 'format' command.
Physically, the new hard drive is using middle IDE plug on my IDE 0, original drive is plugged in on the end of IDE 0. The new hard drive is jumperred to slave, original was orignially set for single, that didn't work so I tried jumperring that one to master, no change in results. On IDE 1 I have a cd-rom on the end plug, originally with no jumper, then added jumper for master (middle plug is empty).
In the BIOS, the second drive was detected with the right number of heads, cyl, etc. It calls it my D drive.
I can get to certain screens in DCA to show me the second drive (only in respect to which drive should boot the kernal - I don't want to install the OS on the second drive, I just want it for extra storage).
Am I missing a step, or am I not installing the hard drive correctly? After DCA and reboot, it still only gives me a choice of my origial drive for 'format', and only shows one drive in the SMC.
I don't know what is on the new drive (it was pulled from another PC).

I have the same problem on x86 Solaris 10 that the format command cannot show my second hard drive, the master and slave hard disk are attached through one single cable and Solaris 10 is intalled in the master disk. I tried devfsadm -v but it still doesn't work, do you have any other way to do that? Thank you for any help.

How come my mac isnt showing my external hard drive after installing os x maverick? and how to i fix that??

how come my mac isnt showing my external hard drive after installing os x maverick? and how to i fix that??

How do you mean it isn't showing the external drive? If you mean on the desktop, click Finder on the menu bar, Preferences, General and check the boxes for Show these items on the desktop - make sure hard drives is checked.
If you mean it is not showing in Finder or Disk Utility, make sure it is turned on, reboot and see if that mounts it so it shows up.

I tried to reload a previously downloaded CS3 program on to my new hard drive and this is the message when I click on the english link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

I tried to reload a previously downloaded CS3 program on to my new hard drive and this is the message when I click on the english link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

Make sure you have cookies enabled for your browser. Try using a different browser if the problem continues.

How do I change the desktop Icon for an external hard drive? I have gone to "Get Info" and tried dragging and dropping several formats of pictures and the icon changes to the generic image of that file type.

how can I change the desktop icon for an external hard drive. Using LaCies and Dimple hard drives.

One of the things I've found with OS X (at least with Snow Leopard, which is my first excursion into OS X), is that all too often the thumbnail displayed on a file, whether a file created or one downloaded, is a false thumbnail. That is, when you do a Get Info on the file the icon in the upper left is the generic icon for that file type, rather than the thumbnail displayed in Finder. Makes it a bit difficult to copy.
Apparently Finder uses Preview in the background to generate the displayed thumbnail without actually creating one.
What I've resorted to doing, particularly with graphic images, is to process them with GraphicConverter - I have its prefs set to automatially add thumbnails and previews. With an individual file this means opening it in GC and doing a Save As. However, a much easier and faster way is when there are two or more such files; I put them in a common folder and drop the folder onto GC. GC then opens them in a catalog view, in the process adding real thumbnails and previews to each automatically. Doesn't take long to do several hundred files that way.

LR 5 my external hard drive no longer appears as a hard drive but as a folder under "Volumes"

I am running LR 5 on a MacBook pro and my external hard drive no longer appears as a hard drive but as a folder under "Volumes". will this affect my ability to search and store in this external hard drive? How can I get it back to normal?

I just started having the same problem, oddly enough with a LaCie 500GB D2 Quadra external. Had it connected via FW800 then suddenly it won't appear in the Finder.
It shows up as an "Unknown Device" in the System Profiler under the FireWire Bus.
I do need the data on it so which solution is easier?
Replace the housing? Or am I better off calling LaCie and using the warrenty?
Thanks,
Shannon

I have copied my music library from two different files from extewrnal hard drive into the Itunes folder. I tunes only recognizes some of the songs. I have reloaded 5 times and can't get intunes to recognize all my songs? HELP!

I have copied my music library from two different files from extewrnal hard drive into the Itunes folder. I tunes only recognizes some of the songs. I have reloaded 5 times and can't get intunes to recognize all my songs? HELP!

" When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
Correct.
" How can I get that music to show up in my library now on my new computer? "
Copy it from your old computer or your backup copy of your old computer.
The sync is one way - computer to ipod.

Copying contents between hard drives with the same folder names erases data

I have Final Cut Pro assets stored in two hard drives. I was attempting to consolidate them into a single directory on one of the two hard drives. I did this by dragging and dropping the contents of one folder into the equivalent folder on the destination hard drive, meaning that several folder names were shared between the two directories.
In Windows, the only contents that would be overwritten are files and folders who share the exact same relative name during the copy procedure. However, OS X appears to have erased the entire contents of the destination folder in favor of the contents of the source folder.
Time Machine is not enabled: Not enough hard drive space to store everything twice.
Is this by design? Am I missing something? Is my data recoverable by means that would not cost me several hundreds of dollars? On a scale of 1 to screwed, am I screwed?
Message was edited by: NuclearBastard

Seems like you did not select the content but the folder itself. Let's say you're copying from folder A to B. To only overwrite stuff in folder B with the same name while keeping other files & folders, you need to go inside folder A and select the content. If you do select folder A itself, it will completely replace folder B. This is normal behaviour and I'm sure it's the same with other operating systems like Windows.
This behaviour, of course, applies also to any subfolders within A & B, so you can't just use the Finder for such a +merge operation+. I'm not 100% sure, but since you were overwriting a lot of stuff, I'd say you're screwed and your data is gone, sorry.
To avoid things like that in the future, you might want to use software which has the ability to synchronize file structures. In Terminal you can use ditto for that, but there are several GUI apps out there, too. Just search http://www.versiontracker.com for merge or synchronize and you should find something.
Björn

Program icon shows up in hard drive, also in application folder.

Similar Messages

Maybe you are looking for