Program in SAP R/3 system to send Pending GR notification mails to SRM use

Hi
Can anyone help me with a program name in SAP R/3 system, which will send notification mails to SRM users for which the Confirmations/GRs pending in SRM. what is the program name.
Here there is some program which is sending out Email notifications to SRM  users to do the confirmations in SRM. where it would send the details of PO number also in the mail. But not able to get the program name whether this runs in SRM or R/3.
I have a faint idea this would run in SAp R/3 system. but not sure about it and the name of it.
Regards
Srujank

Hi,
There is no standard report for the requirement mentioned by you. You might have to develop a custom report.
regards,
MRao

Similar Messages

  • SEND PR data from ECC to SRM using PI

    Hi PI Guru's
    Please advise if there is any documentation to send the PR's from ECC to SRM using PI.
    If not PRs in general if need to exchange any documents from ECC6.0 to/from SRM using PI.
    Can we use ABAP proxys or IDOCs.
    Any help would be greatly appreciated.
    Rgds
    Nikki

    decide proxy or IDOC or RFC based on the business requirement, first search any std IDOc or RFc available if not then go for proxies.
    chirag

  • Sending Human Task notification mail to a assignee not found in LDAP

    Hi All,
    I have 2 requirements:
    1. Suppose i have a HumanTask which sends a notification mail to the assignee when the task is assigned to him/her.
        In our process we are first checking if the assignee's email address is present in LDAP using the BPEL variable that holds the assigneeID.
        If it is not present in LDAP, then we are getting the email address from database before the invocation of the HumanTask.
        Now, as the emailaddress is not found in LDAP, so when the HumanTask is invoked the notification mail will not be sent to the assignee.
        So, we have used a separate email activity after the invocation of HumanTask to send the notification mail to the assignee using his emailaddress that we fetched from the database.
        I don't want to use this separate email activity and wanted to know if there is any other alternative to send the notification mail during invocation of the HumanTask using the emailaddress that
        we fetched from the database?
       Basically i want to know if there is any other way to send the notification mail when a task is assigned and the assignee's email address is not found in LDAP?
    2. Is it possible to send a Human Task's outcomes as links in an email activity body?
       Actually, i am sending a mail to a user using the email activity. Before that a HumanTask is present in my BPEL process.
       I want to send the HumanTask's outcomes as links in the email that i am sending to the user using the email activity just as they get displayed in the notification mail when HumanTask's "Make
       notification actionable" feature is selected.
    Please help me with the above requirements.
    Regards,
    Suman

    AnilB,
    Assigning a task to a user that is not in the directory will likely result in the BPM flow going into suspended state. To avoid this, assign the task to a pre-created group, you should not get an error even if the group is empty. You can then add and remove the users to that group to control access to the task.
    Phil

  • Sending an email notification from iCal when using iPhone

    How do you email an event that was just created in iCal when using the iPhone

    How do you email an event that was just created in iCal when using the iPhone

  • ECC 6.0 with baseline - send PO via e-mail

    Hi forum experts,
    We are having some problems with configuring our system to send POs via e-mail. We are trying to use the following setting, but when the PO is saved (and triggers an output) an error appears without any items in processing log. No e-mail is queued in SOST.
    Medium: 5 - external send
    Program: YBAA_FM06P.
    FORM routine: ENTRY_NEU
    Form: <blank>
    PDF/Smartform form: YBAA_MMPO
    When performing a normal "Print output, medium 1", the PO is successfully printed.
    When changing the program to SAPFM06P, a sapscript form is successfully genereated and queued as an e-mail. We simply don't get it to work using program YBAA_MMPO.
    Are we using the correct program? I have read som discussion threads about it and some experts have suggested to use program /SMB40/FM06P instead. That does not work either.
    Best regards and thanks in advance for your help!
    Magnus

    Hi,
    You are using PDF/Smartform form: YBAA_MMPO for  your PO output and to send mail.
    Use t.code:NACE,select application EF.
    1.Now for your Output type, keep Replacement of text symbols give programm as SAPMM06E and Form Routine as TEXT_SYMBOL_REPLACE in General data  TAB.
    2. Keep Communication Method as CS01
    3. Keep entry of medium as 5 and function as VN
    4.For subject of the mail goto Mail Title and Texts give PO No. &EKKO-EBELN& .
    5.Keep condition record with your PO output type and have medium 5 with function VN
    6. For sending PO by e-mail- you should an e-mail ID in your vendor master
    Regards,
    Biju K

  • I'm trying to unlock an Iphone 4. The celular company allready unlocked it. and send me an E Mail with the instructions to do it myself. I have done every step, and in itunes apears that my Iphone is Unlocked. But I can not use a sim CArd from another Co

    Im tying to unlock an Iphone 4.
    the celular company make it by its system, and send me an E mail with the instructions to finsh the process by myself, throug itunes.
    I did every step, and at the end appers a message telling that my Iphone is unlocked.
    but it does not work with other celular company sim card.
    It only works with the original sim Card company.
    In the Iphone appears a message teeling that has no service with another company's sim CArd.
    I don't know what to do.
    I've been doing this, with different Sim cards.
    sometimes appears a message informing that the SIM card is locked with a PIN. That i must instal the last itunes version and connect it again.
    but every Sim card I have are with PIN.
    If you can help me I;ll be very glad.
    Thank you very Much.
    nicanorfrommon

    Chrisj4203, thank you for your kind answer.
    I have done a lot of restores to the Iphone, and resets also.
    I;ve done holding both buttons as you sugested, but there is no signal appearing.
    I am in Uruguay, South America and the original company is Movistar ( Telefonica) and the new sim card is from ANTEL ( the officail and biggest company in my country).
    I don;t knoe what todo.
    I have been trying for more than one mont.
    I have gone several times to both companies. Aldo two times to Apple uruguay, and nobody can help me.

  • How to send recursive deadline monitoring mails?

    Hi all,
    I have to send a deadline monitoring mails to the approver for every 3 days till the approver takes some action. I am able to send the deadline monitoring mail once by using 'LATEST END' tab.
    even tried using loop, but i am getting mails continuously.
    Please help me..
    Regards,
    Gautham P

    Hi Gautham,
    <b>Activation</b>
    Deadline Monitoring is activated by selecting a reference date /time for the relevant deadline (on the relevant tab page of step).
    <b>Reference date/time options</b>
    Creation date/time of the work item
    Creation data/time of the workflow
    A date in the form of an expression (derived from application
      context)
      E.g. 2 days for document type CMR, 3 days for CMR
    <b>Recipient and Text</b>
    Deadline Text and Recipient of deadline has to be mentioned on tab page Display text.
    NOTE:
    The deadline work item is completed when the deadline recipient processes it or the original work item is completed.
    In the task itself trigger to receive mails but only thing you have to maintain <b>Fork</b>.
    <b>Information on monitored workitem</b>
    Workitem Type: Dialog step
    Status: In Process
    Current Agent: xyz
    Thanks and Regards,
    Prabhakar Dharmala

  • Notification mail need to send

    Hi Experts,
    if any mail recived into my sap inbox.. then i can get a notification mail in  my outlook" u have got one new mail with some costom discription"
    Please let me know how to do that
    Regards
    Ajay Pandey

    Check this link
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10dfad5a-5398-2b10-568b-d3d999d49b5c
    Please include your valid email address connected to SAP User Id in SU01d transaction code.
    Thanks
    Arghadip

  • Error when sending INVOICE01 iDoc to SAP R/3 system

    Hi,
    I was trying to send an INVOICE01 iDoc to SAP R/3 system. I checked the iDoc list (transaction code we02), the iDoc I sent was in the status 51 with the error message as "Program parameters LS <Logic System Name> <Company code> have not been set". Could someone help me how to resolve this error?
    Thanks,
    Trifire

    SLG1 or IDOC in idoc status WEDI

  • How to create the Business System both sender and receiver in SAP XI / PI

    Dear All
    kindly let me know how to create the Business System both sender and receiver in SAP XI / PI
    Regards
    Blue

    Hi,
      If by any chance you are not able to find these....
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
    http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/content.htm
    Regds,
    Pinangshuk.

  • Sender IDOC adapter for SAP 3.1H system & XI 7.0

    We are on XI 7.0 and XI would receive a IDOC message from SAP 3.1H system.
    I need to import IDOC's in imported objects in integration repository but I cannot see any IDOC under the IDOC node. I am able to see the RFC's. Do we need to do extra steps with SAP 3.1H version for IDOC adapter?
    Thanks in advance for help!
    Mrudula

    Ahmad,
    This thread is for sender RFC adapter. I am able to see the all the RFC's but not IDOC's from Integration repository for imported objects from SAP 3.1H version.
    Thanks!
    Mrudula

  • How to see my z programs in sap file system

    hello everyone
    my Z programs are deleted due t some server problem from  my  sap ecc 6.0 system  is there any way to  get   my programs from sap file system 
    if yes then  where  exactly in windows folder my zprogramms are stored.......

    >
    elinuk wrote:
    > my Z programs are deleted due t some server problem from  my  sap ecc 6.0 system  is there any way to  get   my programs from sap file system 
    If your Z Programs are present in other server viz., QAS / PROD, then you can import the programs to your DEV server.
    if yes then  where  exactly in windows folder my zprogramms are stored.......
    I am not sure about programs associated to unreleased transport requests (TRs). But when you release your TR, the data gets stored in COFILES & DATAFILES in the transport directory (DIR_TRANS) of the app server.
    Hope this helps.
    BR,
    Suhas

  • How to push data from BW into SAP R/3 system???

    Hello,
    We have faced a problem. We need to push compressed sales data from BW to SAP R/3 system. But We don't know how to do it.
    Does it exist the standard instruments for it (without ABAP development)?
    How to integrate BW and SAP system?
    We will be much obliged you for your recomendations and advices.

    Hi Igor,
    I'm not aware of any standard out of the box mechanisms for moving Sales data back into SAP ERP. There are some delivered "retractors" for business scenarios like financial planning and consolidations where updated data is sent back to SAP ERP in a closed loop scenario. These retractors have been written in ABAP.
    I would suggest that you search the latest BI content to see if there is anything for sales data retraction. There might also be information in SAP note on how to do this in code.
    To send data from BI, you can also use the 'open hub' feature to extract the BI data to a DB table or file for example. This could then be read by a program to load SAP ERP. The loading would have to be custom development.
    Sorry I can't help you more - I fear you will most definitely have some custom development in this case.
    Cheers,
    Mike.

  • Enquiry of SAP Campus Management System

    Dear all
    Would like to have first enquiry about SAP Campus Management System, is it suitable for use by Learning Centres (for example some tutorial learning centre or child learning centre), what's the scale of the product and most importantly, initial investment? Thanks
    (For the first look I think only suitable to University type Campus?)
    Donald

    The SAP Student Lifecycle Management (former name is Campus Management) solution enables institution-wide collaboration across business processes and users, supporting more effective service,increasing efficiencies, and lowering
    total cost of ownership. Its global approach brings together experience and best business practices from different educational systems, educational levels, and cultures. By accommodating the diverse aspects of international academic programs an non-academic programs, the software helps institutions to be successful in a globally collaborating world. Its flexibility and scalability supports ongoing transformation,growth,and optimization of business processes.
    In other words SAP SLcM can serve different type of 'study' models and cope with their processes/demands. The SAP solution serves the entire Education & Research ecosystem. Below some examples:
    - K-12;
    - Public Universities;
    - Private Universities;
    - Medical Schools;
    - Business Schools;
    - Techning-intensive Universities;
    - Etc, etc.
    Your question regarding the Initial investments I cannot answer directly. If you send me an e-mail (rob(atsign)sap.com) I can get you in contact with my collegeaus who can help you out.
    Please do not hesitate to contact me if you have any other queries.
    Br,
    Rob

  • Sending PGP encrypted e-mails from HCM via SAP PO Secure Connectivity Add-On

    Hi all,
    we are having a requirement to send PGP encrypted e-mails from HCM. As SAP Standard does not support PGP encryption, we are considering the possibility of using the Secure Connectivity Add-on of SAP PO, targeting a Scenario like the below.
    Has anyone dealt with similar scenario? I'm wondering on the Setup on HCM and the Receiver side in PO? Would such scenario work with a Proxy? What I mean is, is it possible to redirect the E-Mail message from HCM via Proxy to SAP PO?
    Every feedback is appreciated.
    Thanks
    Thomas

    Hi Thomas
    SAPConnect is tied to the email protocol, so AFAIK there is no other choice besides mail adapter.
    If you skip the SAPConnect part and use a proxy directly, you can generate an outbound proxy (client proxy) in your HCM system based on a service interface definition from PI's ESR.
    Below are some more information about proxy generation and development. You can find more on SCN by searching "outbound proxy".
    ABAP Proxy outbound program - purchase order send - Community Profiles - SCN Wiki
    ABAP Proxy (Complete Developments on SAP-PI & SAP-ABAP Systems)
    Rgds
    Eng Swee

Maybe you are looking for

  • New Windows 7 machine, Word 2003 & Acrobat 8 - hangs making .pdf

    We got new Dell machines with Windows 7 and transfered all our existing software including Office 2003 and Adobe CS3. I can open and use Word seemingly find.  I can open Adobe Acrobat. When I try to create a pdf file using a word file (and I tried se

  • Fire effect in after effects

    alright i saw this video and im not sure how to do this i was trying and i can't really get close this is all in after effects no stock footage or anything http://www.youtube.com/watch?v=xqXrSiQxuSE

  • Project release to project close

    i have successfully created project and released it and budgeted it and released the budget also. now what is the step by step procedure for acquiring material on wbs elements and giving actual dates and costs to project and finally completing it?

  • An MPLS Cloud

    Hi, I'm looking at a topology where a number of collapsed PE/P nodes (50>100) access a L2 cloud in a full-mesh topology.  The underlying cloud architecture could be something like VPLS from an external provider with the MPLS domain mapped on top.  Th

  • Odd geometry from solaris prtvtoc

    the prtvtoc output, actually it should be the disk geometry, is odd. we have EMC DMX2000 storage attached, prtvtoc shows different size of disk has different geometry, 15G disk shows 15 tracks/cylinder, 62G disk shows 30 tracks/cylinder, 250G disk sh