Program is not compatible while running in another system of same version

Hi,
I am currently working on a BADI implementation.
The requirement is to create BADI implemetation As Is in legacy SAP system.
Both Dev system and legacy systems are ECC 6.0 version.
But a short-dump is coming while executing in transaction at a statement
lt_data[] = it_outtab[].
where lt_data is declared inside the method and it_outtab is importing parameter of the method.
But, in the legacy system it is working properly.
Can any body suggests why this problem comes and what is the solution ?

Hi,
check if both lt_data and it_outtab are of same type.
Regards,
Nagaraj

Similar Messages

This Version of Lenovo ThinkVantage Toolbox is not licensed to run on this system (**bleep**)?

I have a 3 week old W510, Windows 7 64-bit, i7 Thinkpad. Over the Chritmas holidays I was able to start exploring the software that came loaded on the machine. One of these was the ThinkVantage Toolbox which I accessed at least 2 or 3 times to explore the programs and what they had to offer. It worked fine and I was able to view the different offerings inside the toolbox.
Two days ago I used the Lenovo ThinkVantage Tools "Update and Drivers" to find updates to the the machine. It found some updates (I'm not sure of each and everyone but they seemed reasonable) and downloaded them all to bring the system up-to-date.
Today I tried to access the Toolbox and was greeted with a License Authentication Failed message box with this message:
"This Version of Lenovo ThinkVantage Toolbox is not licensed to run on this system".
I assume it was something in the recent updates that did this. I have only installed a couple other photo editing pieces of software since then that I doubt would have any effect on this.
I certainly can do a system restore back to before I did the updates, but I'd rather not since a) the updates for the most part appeared to be needed and were successful, b) I'd rather not have to update those things that have auto-updated (like Norton and Super Anti-Spyware definitions), and c) I'm not sure restoring will help, not to mention re-installing the other pieces of software that successfully installed.
I have been a good doo-bee poster and searched this forum and other web resources and while there is reference made to some solutions for this, I didn't fully understand them so I figured I would ask here for help before trying anything. I do have Lenovo phone support but trying here before calling them.
Thoughts anyone? Should I simply download the latest ThinkVantage Toolbox software and install it? If so, should I uninstall the version I have now?
Looking for any assistance anyone could render.
Thank you.
Jim
Solved!
Go to Solution.

Hi again Jim,
First of all you're welcome!
I have another suggestion for you, it might successfully help you in updating Toolbox to the current version, but for this I'd suggest that you first create a restore point just in case the advice fails. Once created a restore point, launch ThinkVantage Toolbox, give it a minute to completely load/run quick tests etc, thereafter click the green colored question mark -> check for updates, once it finds the latest version, let it download and install, I'm hopeful you won't run into any issues via this approach.
Keep us posted.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

In DOE while running "EXTRACT JOB" system was shut down.

Dear Experts,
while running "EXTRACT JOB" . system was shut down.then extract queues are in ready state. it's not going to running state.long time it appears like in ready state. if i run manually then it's running for some time then again it's going ready state.how will handle this because of it consist of huge entries we couldn't do manually.if any one knows please provide solutions.
Regards,
Ashok Reddy.

Hi Ashok,
Please check whether the extract queues are in registered state. If not, please register the extract queues using QIN Scheduler (Goto --> QIN Scheduler) & then check.
Regards,
Ananth.

Not able to run .msi file on windows XP Version 2002 (SP3)

Hi I am not able to run .msi file in Windows XP Version 2002(SP3)..I am not able to find the log or the Error.Kindly help

Hello,
this forum is about problems within the forum itself. PLease ask in
http://answers.microsoft.com/en-us/windows/forum?tab=Threads
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Want to be able to open tabs in multiple rows, rather than in a single row. I used tab mix plus before, but it says it is not compatible with New tab Homepage. The older version of Firefox allowed this very easily.

Want to be able to open tabs in multiple rows, rather than in a single row. I used tab mix plus before, but it says it is not compatible with New tab Homepage. The older version of Firefox allowed this very easily.

Your plugins list shows outdated plugin(s) with known security and stability risks.
*Java Plug-in 1.5.0_06 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio syste

My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio system?

I am assuming you are using the Lightning to 30 pint adapter and it is not working?

Update v7.1.0.2840 not compatible with Hyundai navteq navigation system

software update v7.1.0.2840 not compatible with Hyundai navteq navigation system
problem related to bluetooth conection
return to 1149 update resolved the problem

You may need to change the ProductBuildVersion in /System/Library/CoreServices/SystemVersion.plist from 12C2034 to 12C1999; then your MacOS X will be compatible with the raw update.
Try the hack described in Re: digital camera raw compatibility update by G Szabo
Regards
Léonie

I was using AVG. I downloaded Firefox 4 and got the message that it's not compatible. Is there another free virus program that works well? Thanks!

my AVG is NOT compatible with Firefox 4....is there another free virus program that i can use?

Try updating AVG. According to their forums, they have updated the Linkscanner toolbar. You may need to do an uninstall/reinstall (see [http://forums.avg.com/mx-en/avg-free-forum?sec=thread&act=show&id=155295 Free Antivirus | Forum - Update For Firefox 4 Leaves Old "AVG Safe Search" Add-On]) .
Does it work?
'''Edit:''' If you end up deciding to switch away from AVG, you can get opinions on free antivirus software on other forums, such as [http://windowssecrets.com/forums/ Windows Secrets]. Many users like Microsoft Security Essentials, others prefer Avast. You get the picture.

Latest version of firefox program is not compatible with windows 7

After I updated the latest version of mozilla firefox in my laptop which is a windows 7 program,it doesn't work anymore. Every time I open the firefox, the screen goes black and I can't see anything on the screen but black. And when I troubleshoot and fix the problem, it says that "COLOR SCHEMES IS NOT COMPATIBLE WITH WINDOWS 7". Program compatibility is the 1.5 version or 1.0. How to fix this one? I uninstalled and already installed a new one but still to no avail the problem is still the same. Should I install the older version? Where to download the older version? It seems that in mozilla firefox website, only the latest version or the 3.0 version is available.

hello Gracerilla, other users with this problem all had an embedded intel hd3000 graphics card with an old driver present. in case this also applies to you, here would be a link to update the driver, which in turn should also address the black firefox problem: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764 (for win7 64 bit)
in case this doesn't solve the issue or does not apply to your system, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

With hoding Tax type is not defined while running he TDS inconsistency

Dear Experts
While running the TDS inconsistency program (RFWT0010) for a vendor group ranging from 1 to zzzzzzzzzzz in company code , I am getting an error that "Withholding tax type is not defined".
Can anybody please help me how to solve this issue.
Thanks in advance.
Points will be awraded.
Regards.
skpatra

Hello Surendra,
For TDS calculation WHT Code and Type are plays a major role in TDS.
In your case, you are not defined wht type in your system without this how system calculates tds. So, you should create type and code and assigned the same to concerned vendor master. For wht type path is
Spro>FA>****>wht>ewht>calculation>wht type for paymentj and inovice posting
If you want to more on this pl feel free to ask us
Thanks
Para

ABAP program developed in one system will it run in another system.

Hi All,
       I have a very important query.
I know that SAP 4.7, BW 3.1 and SAP CRM 4.0 have same kenel release SAP Basis 620.(please correct me if I am wrong)
If Kernel in these systems are same, will an ABAP program developed in one system (say SAP 4.7) also work in another system (say CRM 4) with same kernel.
This is very important me.
Please help.
With Regards
Amit

Hi Amit,
1. If we transport a program from R/3
   to BW or CRM,
   It will work inside BW,CRM
   Bcos the basis/abap layer is always there in such systems.
2. However, if the program uses some tables/FMs etc,
   which are not there in the Bw/Crm,
   then it may give error. thats all.
Regards,
Amit m.

Timer not expired while running process

Dear All
I'm using timer to blink the text message in 6i forms.Its working fine.
But the problem is while running process timer not expired.
If there is any solution to expire timer while running process, please let me know
Thanking you

As I understood you want to expire the timer in a specific time.
you can call SET-TIMER with NO_REPEAT Indicates that the timer should not repeat upon expiration, but is to be used once only, until explicitly called again.
You can call it every time that you want

Accounting exchange rate not picking while running result analysisKKA2

Hi All,
WHile running Result analysis with KKA2 the accounting exchange rate not picking correctly.
When we run the KKA2 from may to sep it is taking may month as default rate and it is extending to june aug,sep instead of seperate exchange rates for each month.
We compared all configurations for this RA key with existed RA key .All the setting are one and the same.in OKG2,OKG3,OKG4,OKG5
PLease help ...
Regards,
Mohan

Hi srikanth,
It is not daily exchange rate.
Actually we copied PS LCR RA key to PS IAS.
PS LCR is working fine and it is picking correctly for the respective months.
Where as In PS IAS it is taking starting month and same continuing for other consecutive months.
Regards,
Mohan

Error - Object variable or with block variable not set while running report

Hi,
I am trying to run BEx reports through portal.
However I am not able to run any report. I am getting following error.
"Run time error '91':
Object variable or with block variable not set"
This is not BEx installation or excel issue as I am not able to run reports using someone else's desktop also.
Also I have authorization to those reports. So doesn't seem to be authorization issue.
Please help me to resolve this problem.
Thank you in advance.
Regards,
Deepti Jain.

Hi Deepti,
Can i knw how you solved this issue?
Regards,
Maili

Downloaded 3.6.15 but get an error when trying to launch Platform version 1.9.2.15 is not compatible with minVersion = 1.9.2.13 max Version = 1.9.2.13

I downloaded and installed update 3.6.15 when I try to launch firefox I get a XULRunner error
Platform Version '1.9.2.15 is not compatible with minVersion >= '1.9.2.13' maxVersion <='1.9.2.13'
How can I fix this?

# Delete the files and folders in the Firefox installation directory, default location is C:\Program Files\Mozilla Firefox\
# Re-install Firefox
This method will not remove your Firefox user data such as bookmarks and passwords, those are stored elsewhere in your profile folder, and will be used when you re-install Firefox.

Program is not compatible while running in another system of same version

Similar Messages

Maybe you are looking for