Program Monitor freezes after updating to 5.5.2
Now, whenever I play a sequence, the program monitor freezes during playback. It usually happens at a cut, but not always the same cut, it is random. The monitor just freezes, but the sound and CTI keep on going. This happens repeatedly.
Mac Pro
OSX 10.7.2
Same problem. 5.5.1 was very stable with a few bugs. All I changed was updaing to 5.5.2 and WAMO my system is now unusable. I've tried updating the NVIDIA driver to 280.26 and thing were worse. Uninstalled PP5.5 Windows and reinistalled from DVD then updated 5.5.1 then updated 5.5.2. Now PP5.5 won't even open crashing halfway through loading. Will try ty unistall everythig and try a different GPU driver.
Similar Messages
-
Windows Premier pro CS5 Program monitor freezes/hangs when video on sequence bar is playing
Hi all,
I have been experiencing program monitor freezes/hang while the audio and the video on sequence bar is still playing. This happens on both HD and SD projects. I have tried many ways but at time it works but at times does not work. i have updated CS5 to 5.02, updated the driver and also quicktime.
Hope someone can help me on this ! Appreciate it.!
This is a complete new system.
The specification as follows: INTEL(R) CORE(TM) i7CPU950@ 3.07GHz 3.56GHz
installed 12.0GB RAM
System at 64bit
Display driver using NVIDIA GeForce GTX 470.Hi Dennis,
Thanks for the reply. I have updated the graphics driver on Nvidia website as well.It still does not work.
Under project settings: Video rendering and playback, i have both mercury playback engine GPU accelerator and mercury playback engine softway only. it is currently set as mercury playback engine GPU accelerator.
Thanks in advance -
Premiere program monitor freezes
Hi, I'm using premiere and after 10 minutes suddenly the program monitor freezes. I can't press the play button. I can select clips on the timeline, access the menu, import footage, move the cursor, but can't press the play button. If I wait for 5 minutes I can press play again but than there is only sound, and the image on the program monitor becomes red (like 100% red color). After restarting windows The problem occures after 10 minutes again. My pc's ram and processor are only used by 10% and I use SSD for the footage.
So I just re-installed premiere and realised that I didn;t had the lastest version. I the lastest premiere cc I opened the project and waited untill all media was loaded.
And now whole adobe premiere freezes.......... I can only use ctrl alt delete to close it down...
Should I format my whole pc? I use windows 8.More info: I realized that the other projects (when I open an other project) are running fine.
I also realized that when I open the project that gives the problem, that there is no problem editing from another sequence. But when I go back to the sequence that gives the problem, the screen freezes again and adobe will crash after a while... unless i go back to another sequence.
it's 6 hours of footage from a 5d mark3 and c100 and d800 nikon. no effects except the levels plugin (but not in the files where the timeline is). -
Essentially, while editing SD footage, on the Premiere Pro CS5 timeline, in a SD 720 x 480 resolution project, the Program Monitor image freezes.
It does not seem to matter what I am doing such a playback, adding a transition, color correction, shortening the length of a clip, or cropping an image. It makes no difference. The Program Monitor just freezes.This happens twice in every hour or so of editing. There does not seem to be a timing variable to this problem, or it is not consistent.
The timeline is still useable and the audio continues playing, the mouse moves, I can access clips on the Source Monitor and play them. Nothing else changes. I can change the playback resolution or make any other monitor changes, although they do not show up since the image at the time of the freeze stays in the monitor. Refreshing does not work. Restarting the program does not work. All changes since the last freeze can be saved since the Save function still works. I just cannot edit and the only way that I can proceed is to reboot the computer.
Adobe Service has escalated this case #182091487, back and forth for almost two months. This is putting a crimp in my production schedule.
This happens sporadically, although on one occasion, I was actually able to demostrate the freeze to Adobe Service while they were on line.
I currently edit on an MSI GT660R laptop
• Intel® Core™ i7-740QM Processor
• Genuine Windows® 7 Home Premium 64bit
• 15.6" TFT-LCD Display (LED Backlight)
• NVIDIA® GeForce® GTX 285M 3D Discrete Graphics Card (DDR3 1GB VRAM)
• 6GB (2GB x 3) DDR3 1066 MHz System Memory
• 1TB (500x2) 7200RPM Hard Drive
• 802.11 b/g/ n Wireless LAN with Bluetooth
• Dynaudio Premium Sound Speakers
• Dual SATA Hard Drive with Raid 0
• Accelerated CPU+ GPU performance with MSI TDE Technology
• MSI Cooler Boost Technology
• USB 3.0 for high speed data transfer
• Blu-Ray Optical Drive
• Built-in 720p HD webcam
• HDMI (High-Definition Multimedia Interface) output
I want my CS3 back.Screen saver is (NONE) so probably not a factor
My laptop is used for editing while travelling. They would not let me carry
my desktop on the the plane. Complained that the three monitors took up too
much space.
Do not really have much stacked up on the timeline. Mostly one, sometimes
two and on the odd occasion, a third track for perhaps a title or PIP.
However, I am using colour correction via Auto levels and ProDad's Mercalli
2.0 stabilizer (incredible plug-in). Never have Red or Yellow bars over the
footage on the timeline without applying these effects. Mercury engine has
really helped with that issue.
When my 'Program' monitor freezes up, I am still able to save, playback
(audio only) the timeline, and even play clips on the source monitor. It has
been suggested that I reduce the Program monitor playback resolution. I will
experiment with that.
I will also follow your suggestion and render more often when these Red
/Yellow bars do appear. I appreciate the suggestions.
Wayne -
Hi, I just switched over to premiere CC and have been having trouble with the program monitor freezing up. I am editing R3D files 5k and therefore have the playback quality set to 1/8. But every time I'm trying to scale up the picture, the monitor freezes completely. Everything else works, but i have to restart premiere to get any picture back on the program monitor. Is there any setting i could change to prevent this? Answers are appreciated!
- Espenmy computer configuration details are:
-Its a MAC
-processor: 2.6 Ghz Intel core i7
-memory 8 GB 1600 Mhz DDR3
in the project settings:
-renderer: Mercury playback engine GPU acceleration (openCL)
-diplayformat: Timecode
And I'm have set the scratch disks to an external HD using USB3, could this maybe be a problem?
The strange thing is that everything worked when I Used the Premiere cs6 before i switched to premiere pro CC.
Thanks for the reply Rameez! -
IPod freezes after updating to software version 1.2!!!
iPod freezes after updating to software version 1.2!!! After installing version 1.2 the "do not disconnect" screen took forever to disappear, so i just removed the cables and it still remained
like that, i restarted it manually, but now it's getting stuck when the apple logo appears...i reset it and when i finnally turns on, and i'm at the language tab, it freezes. can anyone help.!?Apple just released firmware 1.2.1 for the ipod, you should try restoring your iPod again with that.
-
Wifi on iPad freeZing after update
wwifi keeps freezing after update.
Hey F.hodgkiss,
Thanks for the question. The following resource outlines the basic troubleshooting steps for Wi-Fi connectivity. I have also included the steps related to the symptoms you may be experiencing:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware. For AirPort Base Stations, install updates using the AirPort Utility.
Unable to access the Internet while connected to Wi-Fi
If you're using a public or commercial network, you may need to log in or subscribe.
Check to see if you have a self-assigned IP address:
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected and tap ( i ) .
If your IP address is 169.254.xxx.xxx, you may not be able to access the Internet.
If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
If they do not, consult with your network administrator or ISP for further assistance.
If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thanks,
Matt M. -
Constant freezing after updating to 35.0
Firefox constantly freezes after updating to 35.0. Anyway to revert back?
--Actually, unless it has changed recently i believe that it will be 34 I can go check though.
Actually it is version 35. I hope it works for you!!
-Jon -
Program monitor freezes and goes black but I can still hear the audio
Hi just recently I've noticed after a few playbacks the program monitor goes black, the sequence plays out with audio, I just can't see the image. Timeline is mixed with prores, mts But haven't had this issue occur since updating.
THanks
I7 3970
gtx 780 tI
11TB raid 5Hi,
Are you using CUDA for playback? Try changing the Mercury Playback Engine options and see if it helps.
Thanks,
Rameez -
Video Freezes after Update to 1.1
Video freezes after 20 seconds of play and then resumes with no audio after upgrading to 1.1.
From what I've read, this seems to be a problem when video has been converted using a third party software. It seems at this point, the only way to remedy the situation is to downgrade to 1.0. Here's how to do it without having to restore your ipod:
http://www.digg.com/apple/Howto_downgrade_to_older(iPod)firmware_WITHOUTrestoring
Just as a note, I called applecare and my technician was clueless about the problem. She was telling me to send it in, but I'm fairly certain that this isn't a hardware problem, just a problem with the upgrade, as people on many other forums are reporting it. In that case, you probably won't get much help calling customer service just yet. Hopefully they'll put a fix out for it soon.
sony vaio Windows XPHi,
I had the same problem and downgraded to the lower version. now the video works without any problem, but there seems to be another problem. when I want to eject the ipod from itunes, I get a message, that the iPod cannot be ejected because data on the iPod is currently used by an external program...
any idea...?
Windows XP
UPDATE: AFTER RESTARTING THE PC IT WORKED WITHOUT PROBLEMS! -
Jim Simon question??? (Source and Program monitor freeze)
Jim...Did I read correctly that you are NOT having the monitor freeze when your firewire output is set to desktop speakers? Everybody I know is having the same issue I am. When desktop speakers are set the source monitor and the program monitor both freeze when playing out through firewire. If I set it to external device audio everything plays fine.
If you are not having this issue can you tell me what video and audio card you have. I would like to figure this out if possible...
Thanks!tClark,
I use two LCD screens PLUS a CRT TV, connected by firewire to a Panasonic DV deck, which is connencted through SCART to the TV.
I can not replicate your problem. Pressing PLAY, even with a HDV project and with playback settings like this:
you can see what it looks like from this picture during playback:
Sorry for the flash, but it is just a quick snapshot to show what it looks like.
BTW I use Vista64 SP2 and the video card is an ATI HD Radeon 4870 with driver 9.05 -
Program Monitor Freezing Every 10 Minutes (Fixed by Force-Quitting - Relaunch)
When editing in Premiere Pro, everything is fine and responsive for about 10 minutes, then, while previewing my timeline, my program monitor will freeze randomly causing me to stop, save my work, force quit Premiere then re-open to continue editing.
Anyone have a similar issue? I'm thinking it's GPU related, but I've tried switching hardware acceleration off and the issue persists. Very frustrating.
Running a timeline with a mixture of footage - GoPro H264, FS700 MTS, Canon H264 and some ProRes.
2009 Mac Pro with Yosemite and GeFore GTX 680 4GB, 24GB RAM.In addition, occasionally when playing the timeline, the video will continue not allowing me to stop. Audio and video will continue, I'll get the beach ball cursor and I'll have to force quit Premiere.
-
Macbook pro keeps freezing after updating to Maverick
my 1 year old macbook pro keeps freezing after i updated from mountain lion to maverick.
all the time i had mountain lion i can remember maybe once where my mac froze. now, it froze probably 5 times in the last 5 days.
how can i fix this, or better still - how can i revert back to mountain lion? no, i never used time machine and i have 90gb left on my disc.
annoying.See ds store's user tip -> https://discussions.apple.com/docs/DOC-6162.
Good luck,
Clinton -
CS4 Program Monitor Problem after 4.2
I just recently upgraded Premiere Pro to 4.2 and lo and behold I have some problems.
Video in the source monitor looks fine, however the program monitor has almost a ghosting effect on anything with movement.
I've updated drivers, re-installed, tried changing how the video is interpreted. But alas, nothing has fixed it. Everything use to work fine wtih 4.1.
Here is a screen cap with the source monitor on the left, and the program monitor on the right.
Help would be greatly appreciated.I think Colin is right. Try right-clicking on the footage and uncheck "Frame Blend" and see if that helps.
Also, if I were you I would use the XDCAM EX 30P preset for that footage - you might find better results. You could also use Adobe Media Encoder to convert the footage to P2 to make the editing easier...I hear that footage can be tough to edit. -
Iphone freezing after updating to 5.1.1
I have some troubles with my Iphone 4. Factory Unlocked. I just updated my phone to 5.1.1 and it started to freez. I can`t use it. Because when i press home it just freeze and i have to restart it by Home+Power. But it doesn`t help because after restart it freezing again. I tried to restore-no result. All this problem started after updating.. Please help me.. Because now i can`t it turn on.. After last freezing it turned off by itself. Any idea? I don`t want to belive that my phone "dead"
I want to make some remarks:
Decided to make dumping of cellular data of a network. phone restarted and that`s all... Light-emitting diode illumination at the screen burns, but the screen is black. Home+Power doesn't help, held and 15 seconds and 2 and 5 minutes. I tried to connect to a computer by USB and result -Connected Device it is not identified. And of course itunes doesn`t find it...
Help pleeeeease
Maybe you are looking for
-
Error message AA119 while creating asset master through AS01
Hi while creating asset master (AS01), i am getting following error:- Depreciation key M003 not allowed (Check your entry) Message no. AA119 Diagnosis Depreciation key M003 is not defined. System Response Processing is terminated. Procedure You have
-
Need to resize window to show all components !!
I created a simple java application but there is a wiered problem. Unless i resize or maximise the window, I am unable to see any component I added into it. What is the problem with my code. import javax.swing.*; import java.awt.*; import java.awt.ev
-
When can I expect messaging to be fixed?
i use my phone for work and use the messaging a lot.
-
Find all values in an array?
I have an array and I want to output ALL the index values that correspond to a particular value. The Search 1D array only returns the first index, is there a VI that returns them all? Thanks.
-
I bought att-locked but contract-free iPhone 4 from the Apple Store in the mall
Over 9 months ago i bought att-locked but contract-free iPhone 4 from the Apple Store in the mall. Now i live in Costa Rica so my question is can it be unlocked?