Program name for the query generated using sq0102-03
Hi Folks,
How can we know the proggram name for the query generated using sq01 and all?
K.Kiran.
Hi Kiran,
U can get program name of nay transaction code by following this procedure
after entering tcode it will direct u to the related screen then on the tool bar select system then go for status there u can find program name
Rewards if helpfull
Regards,
Pavan
Similar Messages
-
Print program name for the dunning form F150_FR_DUNN_01 in sapscript
Hi,
I am not getting the exact print program name for the dunning form F150_FR_DUNN_01 in sapscript. After an extensive search I have come across few names of print program like SAPF150D2 and SAPLF150. But still I am not understanding which one to use for the form and also how to use it. I am unable to understand which include I should use to write my code.
Kindly help me.
Thanking you.
Pujarini PatraHi,
Yes, you should be able to assign F150_FR_DUNN_01 in Dunning Forms customizing:
and yes, I too would absolutely try to go for either a Smartform or even a PDF Form (if i'd have all the necessary setup for them, like Adobe Document Services, in the system already). I have Basis 702 SP 0011and FINBASIS 600 SP 0021, so all the following technicalities refer to those releases:
The corresponding SAP sample Forms are:
- F150_DUNN_SF for Smartform; and
- F150_DUNN_SF for pdf Form (don't let the name confuse you )
I'm not entirely sure if it's a good idea to try to convert/migrate Sapscript to Smartform and the Smartform to PDF Form - have never done that myself and don't know how good/usable the migration result is. I just take the interface of Smartform from SAP and do the rest from scratch or by copying over the common parts of our existing custom forms.
There are the SAP Standard wrapper FMs for SF and PDF forms already in the System:
- FI_PRINT_DUNNING_NOTICE_SMARTF calling PRINT_DUNNING_NOTICE_SF and
- FI_PRINT_DUNNING_NOTICE_PDF calling PRINT_DUNNING_NOTICE_PDF.
So, theoretically, all you had to do to replace SapScripts (or even to enable all three form types) is to assign a custom BTE Event handler FM to event 1720 (for correct Application), which could detect, what type of form is assigned in Customizing and call the corresponding wrapper FM.
As a sample for coding PDF form wrapper call one could take FI_PSO_EVENT_00001720_PDF (if you have IS-PS) in the system. I'd take out the IS-PS specific "business logic" like posting dunning charges (if it does not apply to my solution) and add the logic to decide, which wrapper to call.
The confusing part about the customizing (Table T047E) to me is that there seems to be no form type defined anywhere in there... just the FORNR field for form name, which should apparently take the names of all three form types... I'd try to extend that table with custom Form type field and try to regenerate Table Maintenance dialog for view Cluster VC_T047_F... That would save the whole effort to try to detect the type for form assigned...
Another tip, in case you didn't know it already: you should be able to see all the Customizing paths, where T047E is involved, when you enter table name in SM30 and press "Customizing" and then "Continue w/o Specifying Project":
The selected entry is the one you are looking for to assing your custom forms, I believe.
cheers
Janis -
I have a problem with elements 8. When ever I start a new project, the program searches for the old, latest used filmmaterial, I have used before. That means, if I use a different DVD, it take so much time, until the program starts. So how can I stopp the automatically uploading of old material?
ThanksYou have 2 unreachable statements in this method.
public static int eval(String s2, String op, String s3) {
return lookup(s2);
return lookup(op);
return lookup(s3);
} You're missing a } at the end of this method:
public static int lookup(String s) {
for(int k = 0; k < symbols.length; k++){
String symbol = symbols[k];
if(s.equals(symbol))
return k;
}You have some loose } and ; at the end of the file:
public static void main(String args[])
commandline();
} -
Table name for BW Query Where used list
Hi,
I am looking for Table name where the information of " where used list " of a BW query stores.
Any help ?
Thanks
SatyaVani,
I dont think it is available...
whats your exact requirement???
you can make use of these below tables
RSZELTDIR Directory of the reporting component elements
RSZELTTXT Texts of reporting component elements
RSZELTXREF Directory of query element references
RSRREPDIR Directory of all reports (Query GENUNIID)
RSZCOMPDIR Directory of reporting components
RSZRANGE Selection specification for an element
RSZSELECT Selection properties of an element
RSZELTDIR Directory of the reporting component elements
RSZCOMPIC Assignment reuseable component <-> InfoCube
RSZELTPRIO Priorities with element collisions
RSZELTPROP Element properties (settings)
RSZELTATTR Attribute selection per dimension element
RSZCALC Definition of a formula element
RSZCEL Query Designer: Directory of Cells
RSZGLOBV Global Variables in Reporting -
The table name for the system generated transactions (Retained Earnings).
Hi Gurus,
I have a doubt and want to know from U experts there. Hope you won't let me down. The situation is
I have created a new chart of account in our Oracle Financial. Uploaded 2007 transactions and opened year 2008 and closed all the periods of year 2007.
When I open a new year Oracle will do internal process transfer R&L balance to Retained Earnings account and make income & expenses accounts to Zero.
I want to know the system generated entries which table they are stored, this transaction is not in Gl_Balances table.
Its an urgent plz reply back soon.
Thanks in advance
BarkatHello.
For EBS 11.5.10.2
Let’s suppose that the last period of you fiscal year is called ‘LAST-2008’ (not adjusting period). If you have an account with a debtor balance of 100 in this period, when you open the following fiscal year you will find an entry of 100 in the first adjustment period of the fiscal year that the ‘LAST-2008’ period belongs to, in the column BEGIN_BALANCE_DR.
It is clear that if the balance is creditor you will find it in the BEGIN_BALANCE_CR column.
Hope this helps.
Octavio -
Standard SAP program name for the data extraction
Please tell me the stadard SAP program for the data extraction for Material, Vendor and Customer.
you might want to explore tx. SXDA.
-
How to find out program name to the corresponding output type of invoice..
hi ALL,
I want to findout program name to my output type.
For one invoice functional peoples are configured. Here i know the outtype. But i don't know the program name .
Can any body please tell me how to find out the program name for the output type..?Hi,
Goto NACE t-code
Select Billing (V3)
Press 'Output Types' Button
In the next screen select the corresponding output type you want.
Then press 'Processing Routines' in the left pane. You can see the program name
Cheers,
Kothand -
How to get the owner name for the file in ftp using abap ?
Hi folks ,
How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
but doest work out me . Helping in this regard highly appreciated ...
Thanks and regards,
Swarupa VanarchiHi
dont you have used the os user while calling the FTP_CONNECT FM?
Hope you are not talking about the user executing the FTP program.
Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
May be i am going too far with if and elses here as your question possesses no clarity.
Plz elaborate your requirement before anybody can help.
Regards
sateesh -
Assign Logical file name for the physical file path through Program
Hi all,
I am having a physical file which is getting generated dynamically. It is having the date and time stamp in its name which is added at runtime.
Now I need to assign a logical file name for the physical file path through the program.
Is there any FM or any other method to assign the same.
GauravI think it is not possible. becuase the date & time added at runtime. so if you check the table PATH you can find filename and their definitions
a® -
How to find the program name of the created sap query ?
how to find the program name of the created sap query ?
Hi avinash,
Try in this way..
Go to SE16 and then go to table TSTC.
in that give program name as <b>*followed by your query name</b>
(for example *TESTQUERY)
and run , that will give progname======queryname.
this way you can find program name.
vijay -
hi Experts,
while running SQL Query i am getting an error as
The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. for the query
select T1. Dscription,T1.docEntry,T1.Quantity,T1.Price ,
T2.LineText
from OQUT T0 INNER JOIN QUT1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN
QUT10 T2 ON T1.DocEntry = T2.DocEntry where T1.DocEntry='590'
group by T1. Dscription,T1.docEntry,T1.Quantity,T1.Price
,T2.LineText
how to resolve the issueDear Meghanath,
Please use the following query, Hope your purpose will serve.
select T1. Dscription,T1.docEntry,T1.Quantity,T1.Price ,
CAST(T2.LineText as nvarchar (MAX))[LineText]
from OQUT T0 INNER JOIN QUT1 T1 ON T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
QUT10 T2 ON T1.DocEntry = T2.DocEntry --where T1.DocEntry='590'
group by T1. Dscription,T1.docEntry,T1.Quantity,T1.Price
,CAST(T2.LineText as nvarchar (MAX))
Regards,
Amit -
Hi
In BO 4.0 SP 9 when a administrator tries to schedule a report via CMC there is no error
But when a user schedules a report and the destination is FTP location -> Use default settings he gets following error
Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)
There is only one Job Server and the destinations are enabled in it
There is no Job server for Crystal Reports Job Server
Do i need to create it and how.Please check if you have proper rights to schedule to FTP. You can create a new job server, whenever you schedule it, there are multiple job servers, it will handle based on the load. But it is not mandatory, depends on the load.
-
How to specify file names for the generated code in wscompile
Hi,
We want to follow a certain file naming conventions for the artifacts generated by wscompile.
How is it possible to set the name for the service interface file, service implementation file etc....
This is possible in AXIS ant task Wsdl2Java. How do we do it for wscompile.
thanxThanks Chris and c. Under Description I'm presented with three Names for the profile: ASCII, UniCode and Mac Script. ASCII and Mac Script are the same name for the profile, with nothing being in the UniCode Name box. Which do I change -- both?
Am I going to screw things up in Photoshop if I change these names to something I can comprehend? Looks like I may just have to make a sticky-note list of the cryptic profile names with my own descriptive name as a reference. Thanks. -
Have new Airport Extreme conneted via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicates extender should have same name as main network? How is it best to configure with the Airport Extreme router 802.11ac?
Different names for the 2.4 and 5 GHz networks are optional, but can be convenient for you to distinguish one from another. It's up to you.
-
Why can I not use the channel name, which is obtained from the function of DAQmx Task, as the input of the channel name for the function of Get Channel Information of DAQ?
Not a lot of details here, but my guess is this isn't working for you because you are wiring in the task to the Active Channels Property and not the actual Channel Name. I have attatched a screenshot of what I believe you are trying to do. The Task has 2 channels in it, so I need to index off one of the channels and wire it into the active channels input of the Channel Property node. Then I can read information about that channel
Attachments:
channel_name.JPG 69 KB
Maybe you are looking for
-
Is there any way to prevent the Intruders to shutdown the iPhone ?
Hi guys, I'm thinking if there is any way to prevent the Intruders to shutdown my iphone, unless they have a password, so, I can sure that my iphone secure and keep the find my iphone's information available to monitor the iphone.
-
Trying to install OS X Mavericks but is showing as temporarily unavailable
I have lost my password for my iMac and was told to reinstall the software OS X Mavericks When I try to do this I get the message "This item is temporarily unavailable"? Any suggestions?
-
Converting Word DOC to PDF changes to PP
I'm converting a Word DOC to PDF, and my header has several Registered marks. In Word it looks fine, but the PDF has added the letter 'P' before and after, changing '®' to 'P®P' I've tried the same source doc on two different machines, and tried usin
-
PO Release (Revoke PO Release after GR done )
Scenario : PO is released. GR is done and delivery is completed. Even after the GR being completely done, the release of the PO can be revoked ! What is the business logic behind this? Once the GR is done completely with the tick Delivery completed
-
No entry in the register of Windows 2003 server
Hi, I just have installed an OAS 10g (10.1.2.0.2) on a windows 2003 server. The ASDB en AS control run good. Everything is OK. Only one thing is very strange. There is no entry in the register. HKEY_LOCAL_MACHINE => SOFTWARE => there is no Oracle. (a