Program names ZX... are reserved for includes of exit function groups means
dear all,
i am doing the enhacement SRVESSR for EXIT_SAPLMLSR_010 in this exit i got include, when i double click on the ZXMLUU19
i am getting the following error.
Program names ZX... are reserved for includes of exit function groups
regrds.
shashi
Hi,
When the warning message is displayed press enter key, System will prompt the message "Include ZXMLUU19 does not exist. Create Object? ". Select Yes option. Include will be created.
Regards
Vinod
Similar Messages
-
Program name zxvau02 are reserved for includes of exit function group
i am facing a problem during user exit.
when i am trying to change the code in function module (va01) in include zxvvau02
an error is occurred 'program name zxvau02 are reserved for includes of exit function group'
so i could not edit the include program.Hi,
1. Find the appropriate Enhancement.
2. Enter the ABAP code in the "Z" program within the function module.
3. Create a project.
4. Add the Enhancement to the project.
5. Activate the project.
At the step (2), when I double click on the Include ZX* within source code of the function module to realize the exit, the
system would prompt to create the include. But NO, it always prompt that the name of include is reserved by SAP and I
cannot create it... I entered an access key for the object ... -
ZX... are reserved for includes of exit function groups
Hello SAPians,
For implementing screen exit , I tried to modify the following include .
It throws the warnig saying :
Program names ZX... are reserved for includes of exit function groups
Can u tell the way to make it editable
I appreciate ur idea
Thanks
SanthoshIt is just warning...
Press Enter to move ahead of the warning.
This comes when you try to implmenet the include of the user exit very first time.
Regards,
Naimesh Patel -
Program names ZX... are reserved for includes of exit function groups
Hi
I'm trying an enhancement example out of a SAP \ ALE | EDI book. I get the above error after performing the following steps :-
1 Via CMOD create an enhancement project.
2 Assign enhancement VSV00001 to the project.
3 Display components & select component EXIT_SAPLVV01_001.
4. Double click the include ZXVSVU01 which will then create it.
When double clicking I get the error in the subject.
Any ideas ?Hi
That should be only warning: the system are saying to you you're creating an abap object reserved for enhancement, but it's what you have to do.
The system can't know you want to create an include for an exit, because you're in abap editor while doing the doubleclick.
So you can go on.
Max
Message was edited by: max bianchi -
I want to use " CALL CUSTOMER-FUNCTION '005'" within the function module IDOC_INPUT_STPPOD. But when I click on INCLUDE ZXTRKU13, I get the error message:
"Program names ZX... are reserved for includes of exit function groups".
What must be done in order for me to create and add my code to ZXTRKU13??
Regards,No Problem Mate.
We've very Handy tool with name as "Abuse report" it never needs to Enqueue/Dequeue before pressed.So You can use freely(Whenever needed) this for yourself also . -
Program names L... are reserved for function group includes
Hi All
Im involved in a migration project from GTS to ECC server where i have problem while creating a function group, when am creating a same include LZFR1T00 in ECC server am getting an error *'Program names L... are reserved for function group includes' Please help.
Thanks & Regards,
D. Sandeep.I'm not sure what GTS is, but I guess you'll need to go to SE80 and create a function group (Z...). SAP will automatically generate the include with the L... name.
-
Getting msg 'Program names L... are reserved for function group includes'
Hi all,
When I try to create a SAP standard Include which start with L, I get the message which says <b>''Program names L... are reserved for function group includes".</b>
I have already created two standard SAP FMs.
Please let me know how should I go ahead and create the Include.
Thanks and regards,
AnishurHi,
When you create the Function group, then if you look at the Fucntion group in SE80, then tehre inlcudes will be created, for FORMS if it will create the includes, and for TOP it will create the include, for L also it will create the Incldue(L referefs coding of subroutines).
So, goto SE80 and activate the Include directly, then you can write the code in that include
Regards
Sudheer -
Standard pf-status and program name to down load for alv
standard pf-status and program name to down load for alv
Regarding
anilHi,
SAP Program for standard PF-Status is : SAPLKKBL
PF-Status : STANDARD Standard for General List Output
STANDARD_FULLSCREEN Standard for general List Output in Fullscreen Grid
Thanks,
Kishore -
Where to see activities, which are created for the campaign with target group
Hi
I have created a Communication Method in SPRO -> CRM -> Marketing -> Marketing Planning & Campaign Management -> Campaign Executtion - Define Communication Method : Activity has been configured
Activities are not appearing after creation of campaign with target group.
Where to see activities, which are created for the campaign with target group?
Regards
HamidHello,
alternatively to check table CRMD_ORDERADM_H directly you can use the related transactions search for the campaign:
This should bring all activities generated by the campaign. If this is empty first check the job log of the campaign execution job again:
This gives information if any target group members have business transactions created. If the log does not contain the required information you can debug from SM37. The business transactions (activities, leads, sales orders) are generated from function module CRM_MKTTGGRP_PROC_CREATE.
best regards,
Johannes -
Why we are going for OOALV insted of function modules ?
Why we are going for OOALV insted of function modules. ?
Its very easy to use function modules directly compared to OOALV.
IS there any particular reasons or any advantanges of using ooalv
Thanks & regards,
hari priyaHi
a) from abap coding point of view,
alv list is done with Function modules,
alv gris can also be done with FM,
but can also be done using OO concepts.
b) Alv grid (using oo concept) requires
designing the screen layout .
Hence, in one screen, we can show more
then one alv grid
(we cannot show more than
one alv list on one screen)
c) ALV grid uses ActiveX controls
present on the Presentation Server.
Hence, it consumes More Memory
on the presentation server.
d) ALV LIST is Display Only.
Whereas
ALV Grid Can Be made EDITABLE for entry purpose.
e) In alv grid, these options are possible,
but not in alv list.
without horizontal lines
without vertical lines
without cell merging during sorts
display total lines above the entries
ALV LIST Can be coded using only FMs
ALV GRID Can be coded using FMs and object oriented concepts
ALV LIST Can be displayed hieraicharlly
ALV GRID cannot be displayed hierarichally
<b>Reward if usefull</b> -
Using the same top include of a function group inside a report
I have a function group .
I want my report to use the top include of the function group.
Is this possible.How?
I tried the use the include statement inside report it didnt work...TOP INCLUDE of FG starts with FUNCTION-POOL statement, hence you ge the error.
Solution: create new include to encapsulate your definitions there, then include it in TOP INCLUDE of FG + your program.
Regards
Marcin -
What is the name of the table for finding user exit !
What is the table name to find the user exit !
Hi,
Goto to the table tstc and enter the transaction code for
which u want to find out the User-Exits. Check out the
program name from the result. Goto SE38 and dee that
program in display mode. Then search for the string Call
Cutomer-Funtion. All the result of search are the user
exits defined there for that transaction.
SAP user exits (enhancement names that we see in SMOD transaction) are all stored in the table MODSAP. The field NAME contains the enhancement name and the field MEMBER contains the name of the function module that will be called if the customer enhancement exists and is active. The customer enhancement projects are stored in the table MODACT. There, the NAME field is the name of the project and MEMBER is the name of SAP enhancement (that from the MODSAP).
So, if you are in some include, you can use where-used-list to get to the function module name. Then you find the SAP enhancement name from the MODSAP by supplying the function module. And finally, you find the customer enhancement projects by querying the MODACT with the SAP enhancement in the field MEMBER.
cheers,
vasavi.
kindly reward if helpful. -
How to find out the Area Menu for a Report/ Table/Function Module
Hi,
Is there any procedure to find out the <b>"AREA MEANU"</b> for a Report/Table/Function Module...
Or is there any Transaction code / Report is available to find out all the report for a particular "AREA MENU".
Thank you for your quick response...
Regards,
Thiru
<b></b>Hi,
Check these below threads:
user log in & log out time SAO
How to find user log-out time ?
Regards,
Nitin -
HT6160 What ports are used for Apple Configurator to function with IPads?
Need to know what ports need to be allowed for Apple Configurator to function.
Apple Configurator runs locally on an OS X computer. It requires a USB connection. So no ports required for connecting Configurator to iPads.
However, there are some ports that need to be opened for iPads to work with Apple's server if you are behind a firewall. Here is a list of known TCP and UDP ports used by Apple software products: http://support.apple.com/kb/HT6175?viewlocale=en_US
To use iPads behind a firewall (Configurator or not), you'll want to definitely open 5223 for Apple Push Notification and the standard ports for HTTP/HTTPS (80 and 443). If you're using an MDM, you will likely need to open 2195 and 2196 as well. If you still have issues port watch and see what an iPad does when trying to get to the store.
Hope this answers your question!
~Joe -
If you are looking for the Project Siena Functional Reference ...
Hello,
If you are looking for the functional reference direct link
http://siena.blob.core.windows.net/beta/ProjectSienaBetaFunctionReference.html
Regards
StonyArcHope you are refering it to the actual page, which you invoke for any cfm/cfc request then yes, its extension would be .cfm/.cfc page but if you are refering it to its corresponding encoded pages from {ColdFusion10}\cfusion\wwwroot\WEB-INF\cfclasses then its extension would be .class.
Regards,
Kaif Akbar
Maybe you are looking for
-
Two users on same machine working on same iWeb site
Hi We have two users on our new iMac because some things we want to keep separate. But we both want to work on our iWeb site when we feel like it, from our own account. I copied the domains file into Users\Shared and it appeared we could both work on
-
Why doesn't my pictures show up on my Ipad and Iphone? I have my pictures in the photostream upload folder but they do not seem to be uploading. Thanks.
-
Internet Support in Dev. 6.0
Hi, Has anybody tried the internet support feature in Dev. 6.0 yet? Any information would be greatly appreciated. Thanks, Monika null
-
How to remove "Created by" and "Last Modified" on Edit list item
Hi, I have a custom list, after adding items when I try to edit, I can see "Created by" and "Last Modified" at the bottom left(You can see in pic below). I need to remove it, How can I achieve this? This is overlapping with some of my fields when I
-
BC installed BEx Variables are not visible in Query Designer
Hello, I have installed SAP Exit BEx Varibales from Business Content (0P_KEYDT, 0P_KEYD2 and 0P_KEYD3) sucessfully. But when I am not able to see these variables in the Query Desginer ( Need to restirct these on Net Due Date, Posting Date). Please ad