Program no longer editable after task manager close

Gurus of Labview,
I recently started messing around with event structures and I created a program where I inadvertently created an infinite loop condition so the program had to be stopped using abort execution. Unfortunately, abort execution did not work so I had to close Labview using the task manager.
After I closed down Labview and reopened it, my VI can still be run, however, there is no capability to edit it because I cannot access the block diagram (the selection is grayed out). What exactly happened? Did I break Labview?
Sincerely yours, IdontknowanythingaboutLabviewapparently.

bravedonxiote wrote:
Gurus of Labview,
I recently started messing around with event structures and I created a program where I inadvertently created an infinite loop condition so the program had to be stopped using abort execution. Unfortunately, abort execution did not work so I had to close Labview using the task manager.
After I closed down Labview and reopened it, my VI can still be run, however, there is no capability to edit it because I cannot access the block diagram (the selection is grayed out). What exactly happened? Did I break Labview?
Sincerely yours, IdontknowanythingaboutLabviewapparently.
Sounds like the VI is corrupt.  Was there a recovery option?  Do you have an earlier version you can go back to?
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Similar Messages

  • Firefox won't start. The program is running in the task manager processes, but the application won't open. I have restarted the computer, uninstalled and reinstalled, now I am lost!!!

    I have a Dell Inspiron 530 desktop running Windows Vista Home edition. Firefox was working properly just as it has for years. All of a sudden when you click on the icon, nothing appears. I open task manager, no applications show. I go to processes, there is firefox32. I kill the process and start over...endless loop. I shut the computer down and restarted. Same issue. I uninstalled firefox and reinstalled, same issue. I idon't know what else to try.

    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Vital Program no longer works after updating JAVA SE - Need help fast!

    System Info:     Window Vista Home Premium (Service Pak 2)
              Intel Core 2 CPU T5200 @1.60 GHz
              RAM     2 GB
              32 bit OS
    JAVA 6 SE Update 18 (build 1.6.0_18_b07)
    I am just an old guy, not a techie, with diabetes who uses Bayer?s CLUCOFACTS Deluxe for Windows to monitor/manage my blood sugars.
    A couple of weeks ago I had a warning message on starting up the program which led to a call to Bayer. They advised me to update my JAVA applications, which I did. Since that time, I have not been able to open the Bayer?s CLUCOFACTS Deluxe for Windows application.
    I searched the web to see if anyone had a similar problem. It appears a number of people have the same issue and have not been able to solve the problem. I signed up and logged into the JAVA site to see if there might be some clue . . . the lingo is over my head. I did check JAVA, via the site to insure it was running properly on my local disk.
    My gut feeling is a link was broken when the original JAVA was cleaned from the computer in preparation to do a fresh download of JAVA. When the current version was loaded, I was unable to open the application. Thinking it might be a matter of how the programs were loaded, I then downloaded/reinstalled Bayer?s CLUCOFACTS Deluxe for Windows without any luck.
    I am willing to give this another go if you have any specific advice that may help me find a solution. Because I am hearing impaired, the telephone is not an option for working through this problem. We have to rely on email.
    I need very simplified, step by step, instructions get the program up and running again. (Example: Start > Control Panel > JAVA right click > Open)
    I am not into programming or the development side of JAVA; I am just a simple user who needs some advice on how to get the program up and running again in order to manage my diabetes.
    Thank you so very much for taking time to help me!
    Jim

    Seems you're [not alone|http://www.health-forums.com/alt-support-diabetes/bayer-glucofacts-deluxe-problem-136625.html] <-- link
    Best guess advice is to uninstall Java completely and then install the Java version that came on your GLUCOFACTS (not CLUCOFACTS) CD. Then, from Control Panel -- > Java, clear the checkbox for "Check for updates automatically".
    Good luck!
    db
    edit
    Oh, it's probably not a CD but the Java folder on your USB device.
    Edited by: DarrylBurke

  • Trying to finish a reinstall of the master collection and the installer says that I have Safarinotifi program running and needs to close it but I can't find it running in task manager?

    Any suggestions are most appreciated.

    Closing Programs Interfering with Installation
    PC - Task Manager: (CTRL-ALT-Delete) http://support.microsoft.com/kb/323527
    Mac - Activity Monitor: http://osxdaily.com/2010/08/15/mac-task-manager/

  • LogonUI.exe, can't see it in task manager anymore, dose it mean its not running?

    after i tried to solve the issue with 26 csrss.exe running, it seemed to meany, i no longer see LogonUI.exe in task manager.
    forum posts from csrss.exe topic.
    Post 1
    i tried process explorer & trying stuff with that i opened a new csrss.exe & that works under my user not system & i cant kill that process (i double clicked on it), after restart it goes away? or should i just pull the cable out? i mane sudden
    shut down, status suspended, but it is on the list in task manager, how to get rid off it, end progress tree?
    it just it did not have any info about csrss, so i tried to open it with process explorer, but that thing did not do what i though, that's why it all happened.
    it also opened new Client server runtime process, i guess that csrss.exe under user is still in task manager list.
    Post 2
    restart solved the issue, at least it seems so, also that incident removed 24 csrss.exe from task manager, i had 26 running new i have only 2, i did it just to find out that maybe i can remove the csrss.exe what i opened after restart, but i did not expect
    this result, maybe this what some call zombie processes, they were in use once & when the process stopped they were stuck?
    some processes disappeared, example LogonUI.exe is no longer running, i had 25 LogonUI.exe running before, with restart it booted, i hope that PC will start tomorrow to, i hope i did not mess up something & it wont start,
    or i messed up PC security, made security holes.
    Another forum
    Post 1
    u have no idea what happened, i got both Process Monitor & explorer, i messed up double clicked on csrss.exe & that opened a new csrss.exe in task manager under my user, then i tried to kill the process, but it only suspended it, then i was thinking
    maybe after restart it lets me remove it totally from task manager, i made restart & what do i see when i open task manager? i see only 2 csrss.exe running, LOL sometimes messing up fixes the problem.
    maybe this what some call zombie processes, they were in use once & when the process stopped they were stuck?
    but all csrss.exe seemed legitimate, & no infection.
    Post 2
    does LogonUI.exe really run right new? is it just not showing? if its not running then i would have error message or problems with display? it would be funny if tomorrow i have all the 26 csrss.exe back.
    is LogonUI.exe running & just hidden, was it normal that LogonUI.exe was shown in task manager before? or is it  normal when its hidden? will it effect gaming? cant test, no games installed right new.
    but csrss.exe is not the only process that has more then 2 running & some over 10, one i counted it is 25.
    ok this are gone to, maybe this were connected to csrss.exe issue, but i have 10 svchost.exe, this should be normal?
    some processes disappeared, example LogonUI.exe is no longer running (well it seems it is no longer running, cause its no longer shown in task manager), i had 25 LogonUI.exe running before, with restart it booted, i hope
    that PC will start tomorrow to, i hope i did not mess up something & it wont start, or i messed up PC security, made security holes.
    i know some of my post i copied here repeat some things i said before, i copied the post cause i was thinking that it will help people to understand my situation better :).
    & i only double clicked on csrss.exe in windows system32 & created a new process, & i did end task to it & it was only suspended not killed, there was 2 win explores opened, one was cause i double clicked csrss.exe trough explorer, well u
    can see the files with out it, i was unable to remove it so i made a restart, & some processes were gone after that.
    i wonder did i mess up my windows & stopped some necessary progresses? despite the fact that PC is running, & seem to be running fine.
    csrss.exe was running 25 times & csrss.exe was running 26 times, but there was more processes that were running more then 3 times & they are gone to.
    if some processes i don't see any more are necessary i hope they at least run on background silently, is LogonUI.exe meant to run all the time like it did before? or only for few sec on log-on/start-up? so user never see it.
    PC seems to run fine right new, i did that stuff yesterday.
    i also have alienautopsy  & PC-Doctor to what is part of alienautopsy, i mentioned it in case it matters, also when i got in windows i so some strange process for few sec in task manager, its icon looked like computer chip, cant remember the process
    name, but if i remember correctly it was DLL or Intel process.
    under what name is LogonUI.exe admin tools service? i could check it from there, if u think its necessary

    well LogonUI.exe is listed on my task manager again, i mean its back, & about csrss, i have 3 running, i had 2 running yesterday (in task manager all 3 are running under system), with process explorer, it did not matter which of the csrss info i looked,
    all is same, all are runede by same processes, i could not copy that info under environment, but what i remember is, one was a  Invidia Pshysx, second & 3th was something to do with Intel, then i remember powershel, all that i remember, not worried
    about csrss yet, cause its still just 3, but i wonder about LogonUI.exe, for some reason i can't add picture/screenshot here
    dunno is it all normal or not, but i write it down here just in case, no problems with high memory nor cpu usage, PC seems to run normally
    if its not normal i have no idea whats causing it, i guess i need to just w8 a year or so before i give my PC to shop for maintenance, cause this is beyond me i think, cause no infections found & PC seems to run & function normally, maybe its caused
    by some old registry entries, i know registry cleaners are dangerous & can harm windows, so i think windows team should create their own reg cleaner free ware that finds only unnecessary reg entries that are no longer needed, a safe reg cleaner, also it
    mite be software issue/bug like example Invidia maybe is creating to meany hosts or how are this things called, csrss is connected to host service as far as i know, same goes for powershell & others that use csrss.exe, or windows bug, or bug that is caused
    by both, win8.1 & this drivers, well that's just a guess
    maybe its a bug, system has problems with removing some closed processes from the list, or shutting town the ones that were suppose to run temporarily?
    maybe i should ignore it until it starts to cause problems? i mean hit performance in a negative way
    i also noticed 2 dwm.exe & winlogon.exe running
    i used Ccleaner, but not for registry, i cleaned internet temporary files system temporary files event logs & memory dumbs & so on & on (its to much writing to write down all it cleans), if some of this type of files what are deleted with
    that, can it cause some processes to multiply? maybe among this files is a file where its written example what processes should be running or which process is connected to which process, like the Path & stuff, so registry cleaning is not the only cleaning
    that can cause issues?  or is it
    coincidence that after cleaning next day i see 1 extra csrss.exe &
    dwm.exe & winlogon.exe? either way i don't know do i want to test it & use cleaner 5 days after today again, does windows delete this things i mentioned i cleaned with cclener automatically over time? either way, i think i won't try anything
    to solve the extras issue, but if the number of this processes grows & it starts to cause problems i may just take the PC to a expert
    PC seems to run & respond normally
    EDIT 21/10/2014:
    today there is 2 csrss.exe & the other processes are back to 1 as well & LogonUI.exe is gone again, well i did not look processes when i turned PC on, i did it after restart, maybe it accrues after boot when win opens, that some processes remain
    & some are double
    is it normal that when i'm not doing anything with PC it takes 19% memory after PC start until i shut down & after restart it takes 16% memory (when i use restart button in windows), does this mean start up requires more memory & processes that
    remain running after start-up?

  • Firefox 5.0.1 hangs on certain pages and won't shut down - even in Task Manager

    Using Windows XP Media Home Edition. Whenever I visit certain sites (today it was ktlk.com) Firefox becomes unresponsive and won't shut down - even using Task Manager. The only way to use Firefox again is to re-boot the computer. No error report.

    This started for me in the past couple of days. Firefox will start to load a page and then it stops and will not load any page that I try to open. When I close the program it still appears in Task Manager and will not end. The only way I can stop it is to reboot. It does not seem to happen all the time. I suspect it might be flash related since the first time it crashed was on YouTube. It also happened during a Google image search. I turned off all add-ons in safe mode and it still happened.

  • Firefox crashes on shutdown, shows not responding, must use task manager to end task, windows says problem is with container.exe file

    whenever i decide to shut down firefox, i click on the x in the first tab and it will not shutdown the program. i must go to task manager to close the program. i get an error report that says there was a problem with add-on container.exe. i have looked in my add-on list and i see no container.exe there. where is it coming from and how do i get rid of this problem. i have even tried to shutdown the program with the x in the upper right corner and it does the same thing. i have recently updated firefox and it still does the same thing.

    Some added toolbar and anti-virus add-ons are known to cause
    Firefox issues. '''Disable All of them.'''
    Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift><br> ''(Mac Options)'' ''' key, and then starting Firefox. Is the problem still there?

  • Run the Task Manager on startup. How?

    Hi
    I installed the final windows 8 from dreamspark. Now i always started the task manager automatically at the start up. I tried to do the same with windows 8 by adding a taskmgr.exe shortcut (located at c:\windows\system32) at the startup folder (c:\users\"username"\appdata\roaming\microsoft\windows\start
    menu\programs\startup). Now the task manager can be seen in the startup tab in the taskmanager, but when i restart my computer, the task manager doesn't start.
    Does anybody here know the solution to this problem?

    Doesn't work me after these setting...............I don't know why? Can someone help me please?
    Running Windows 8.1 with 4go DDR2 ram.
    First, start Task Manager manually (Start,
    taskmgr, Enter) and enable
    Options->
    Hide when minimized.
    Then, in Windows Explorer, open following folder:
    C:\Users\<username>\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
    If you want this to be active for all users, open this folder instead:
    C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
    Now, right click on empty space, select New->
    Shortcut. Type in
    taskmgr, click
    OKand Finish.
    You are not done yet! Right click on new taskmgrshortcut, select
    Properties. Now, in
    Shortcuttab, configure
    Run-> Minimized.
    Now, reboot. After you switch to desktop again, make sure you configure
    Control Panel->
    Notification Area Iconssuch that
    Windows Task Manageris set to
    Show icon and notifications(default setting is
    Only show notifications).
    Doesn't work me after these setting...............I don't know why? Can someone help me please?

  • ITunes won't load when I click, not running in "task manager"

    I have a Dell Inspiron 1545. I run on Windows 7. iTunes was operating normally for me until recently... just a few days ago, I discovered that iTunes wouldn't load when I clicked on the icon on my desktop. I've tried clicking on it from the start menu and trying to open a music file via iTunes as well. The most that will happen is that the "checking iTunes library" box will pop up, load for a little while, and disappear. My cursor will also make it appear that the computer is loading it for a few seconds, and then give up. When checking to see if the program was even running, my task manager doesn't list iTunes. I tried uninstalling iTunes and reinstalling iTunes to the current version (I may have been operating a version behind before), but 10.1 is behaving the same way. I am a music student that relies heavily on listening to iTunes for homework, so any advice ASAP would be GREATLY appreciated! Thank you!

    Quicktime is loading properly and plays videos just fine. Hmm... curiouser and curiouser!
    That is odd ... with the most common causes of an error message free iTunes launch failure, iTunes.exe persists in task manager. The one I check for when iTunes.exe isn't persisting will usually prevent the QuickTime Player from launching.
    Does the problem seem to be systemwide or user-specific, with those terms in the sense used in the following troubleshooting article?
    [iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues|http://support.apple.com/kb/TS1717]

  • After closing Firefox and trying to open a new session, I get periodic pop ups telling the program is still running. I open the task manager and close it, and everything's fine. What's the issue, and how do I get it to stop?

    Problem doesn't happen every time, and I've tried to leave it alone to see if there's an update that needs to finish loading. After being left overnight, I still had to use the task manager to close the Firefox program. I have no idea what it's doing, and I'd like to know. Is Firefox taking over my computer so it can move on to my house, and then go on to rule the Tri State Area?

    See - [https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_firefox-hangs-when-you-quit-it Firefox hangs when you close it]

  • Adobe 10.1.7 will not close in task manager after you exit the program. High cpu

    Hello,
    Updated to 10.1.7 and noticed that when you close the program an instance of acrobat stays open in task manager with high 50%+ cpu usage. Will not close at all unless you end task. if you open adobe again a new instance opens again consuming more cpu and cripples the machine with high cpu. This is on win 8 64bit machine. Had the previous release 10.1.6 working for some time on the same machine with no issues.
    Thank you in advance

    Identical issue with Acrobat XI Pro on Windows 8 Pro 64 bit. After viewing PDF file, upon closing Acrobat, a new Background Process starts called Adobe Acrobat (32 bit) uses 18% of cpu.  I have left run for three to four hours and does not close.  If I open another PDF file and then close, a second Background Process of Adobe Acrobat (32 bit) start, also using 18% of cpu.  I was able to open a third PDF file and upon closing a third Background Process of Adobe Acrobat (32 bit) start, also using 18% of cpu.  I did not try more.  All three consume over 50% of processor and after an hour does not close.  Fan and cpu begin to run hot so I manual End Task.  I tried Repair Acrobat Installation command, did not fix.  After searching forum used the Adobe Reader and Acrobat Cleaner Tool (http://labs.adobe.com/downloads/acrobatcleaner.html) to uninstall.  Then downloaded Acrobat XI Pro from My Adobe account login.  Reinstalled software.  Issue gone, could not replicate even after several hours of trying.  Then Checked for Updates. After updates installed, loaded and brought to version 11.0.3, problem returned as before. I have PDF files on both local drive and NAS, been able to recreate issue on both.  In a PDF intensive environment, I was having to leave the task manager up and occasionally stop Background Process of Adobe Acrobat (32 bit) so as to keep processor usage and fan speed down, thanks to Goateye01 for the suggestion, I now leave Acrobat open and close the files, this way the background process hang does not occur.  Additional Note, only able to create issue with standalone application, issue does not occur when in IE10 and viewing PDF files.   Hopefully a fix or helpful guidance coming soon?
    Vaio model SVS151290X
    Intel Core i7-3632QM [email protected]
    12 GB Ram
    256 GB SSD

  • When I close a .pdf file the program continues to use the CPU I have to go into Task Manager and End Task

    Hi
    When I close a .pdf file in Adobe Reader the program continues to run on the CPU until I go into the Task Manager and End Task.
    I am running Windows 8 with Adobe Reader Ver 11.0.07, I have uninstalled the reader and reinstalled also checked for updates and ask the program to check the installation, which it did with no change I still have the problem ?.
    Peter

    Hi Peter,
    Please check the performance by disabling the 'Protected mode' in Reader.
    Edit > Preferences > Security (Enhanced) > Enable Protected Mode at startup
    Uncheck this option. Click on Ok.
    Close and launch Reader and check.
    Ref.: http://helpx.adobe.com/acrobat/kb/protected-mode-troubleshooting-reader.html
    Regards,
    Rave

  • When I exit firefox it closes the program but it gets stuck in memory so when I open it again i have to kill the process in task manager

    When I exit firefox it closes the program but it gets stuck in memory so when I open it again i have to kill the process in task manager, and it can be right away or I can come back a few hours later and its still stuck in task manager, I am tired of having to kill the processes every time I use firefox.
    == This happened ==
    Every time Firefox opened
    == a week or so a go ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; AntivirXP08; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Hanging at exit is most often caused by an Extension or a Plugin.
    <u>'''Kill Application'''</u>
    In Task Manager, does firefox.exe show in the <u>'''Processes'''</u> tab?
    See: [http://kb.mozillazine.org/Kill_application Kill Application]
    '''<u>Causes and solutions for Firefox hanging at exit:</u>'''
    [[Firefox hangs]]
    [http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
    [[Firefox is already running but is not responding]]
    <u>'''Safe Mode'''</u>
    You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes <u>'''before'''</u> starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
    See:
    '''[[Troubleshooting extensions and themes]]'''
    '''[[Troubleshooting plugins]]'''
    '''[[Basic Troubleshooting]]'''
    If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling <u>'''one at a time'''</u> until the problem reappears. <u>'''You MUST close and restart Firefox after EACH change'''</u> via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

  • Firefox always in task manager - it doesn't always close the program since the new update

    Since I got the new Firefox 29.0.1 - when I want to reopen Firefox, I constantly have to go into the Task Manager and shut down the process before it will let me in.
    I haven't had any Windows updates nor updated/added any new software on my PC since the Firefox update. So I know it has to be Firefox that's causing this bug.
    A screenshot of my PC's System Task Manager after I closed Firefox:
    http://www.tyacke.net/firefox 29.0.1.jpg

    Found the screen shot; http://www.tyacke.net/firefox/29.0.1.jpg
    Your '''\''' in the original address should be a '''/'''.
    I don't see Firefox listed.
    =====================================
    From what I have been reading from other posts on this forum, the issue may
    be caused by the clear history settings.
    Press the '''<Alt Key>''' to bring up the tool bar. Then '''Tools > Options > Privacy'''.
    The button next to '''History''', select '''Use Custom Settings'''.
    At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
    At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
    '''Form And Search History''' leaving the others off.

  • My iTunes 10.6.1.7 automatically restarts every time I close the program.  I have to open the Task Manager to close it and keep it closed.  Any suggestions to fix?

    I have closed the program repeatedly, but every time I do it reopens within a few seconds.  The only way I have found to make the program STAY closed (not using memory and CPU time) is to force it to close in the Task Manager.

    Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
    Re: Everytime I close Itunes it loads back up

Maybe you are looking for

  • Problem with printing via HTC one

    Good morning I have a problem with my printer device (HP Photosmart 2575 All-in-One) When i try to print out from my cell phone i recieved a message at the printer lcd display "operator involvement". This happened after an upgrade to my mobile phone

  • The siri tab will not open in setting, general iphone5

    anyone know how to fix this issue?

  • Importing from .dmp.gz file

    Hi, I have a mydb_071202.dmp.gz sitting on the mount along with some .log files. Need to import that into my db instance. I've never done this before, what are the steps I need to take? Do I need the .log files? Do I run command(s) in the shell or SQ

  • Use of XVFB Unix tool

    we have got a Java application deployed on a WAS 6.40 SP13 and we want to use the server unix tool xvfb for displaying drawings in the browser of the users. In a previous step we have got this application running on a IPlanet server and we added thes

  • No pick and send in File to file scenario

    Dear XI Guru's,         Am a newbee in XI world i have done steps related to XI file to file scenario in my XI system. I have taken help from the following blog. Step by Step Guide: XML File 2 XML File Scenario: Part I Step by Step Guide: XML File 2