Program not found in ECC 6.0 for manual reposting of primary cost
Hi exps,
The program SAPMLK23F1 is not found in Ecc 6.0. the program SAPMK23B is replacing the program.
now this program is using anywhere else or toally removed by sap in ecc6.0?
is any programs which is not in ecc 6 kindly list out for me. points will be awarded.
Raghav
Edited by: Raghav K on Apr 29, 2009 5:20 PM
Not answered
Similar Messages
-
BAPI for manual reposting of primary costs
Dear all,
I would like to create a program for manual reposting of primary costs(KB11N) due to much data will be posted. Should anyone tell me is there a standard BAPI can be used?
Thanks,
BenHI,
see SAPNET note 737917 for the available BAPI's to post actual CO-data, guess its BAPI_ACC_PRIMARY_COSTS_POST you are looking for.
Best regards, Christian -
every time i download a file from the web (ie. a PDF file) i get "Anti-Virus Program not found " message. This has been happening since I changed anti-virus programs for CA etrust to Sophos. How do I get Firefox to recognise my new Anti-virus program?
That is a very good warning provided by the Download Statusbar extension. Something like that should been built into Firefox. I filed this Bug report a couple of years ago, about the lack of a warning like that. <br />
https://bugzilla.mozilla.org/show_bug.cgi?id=480855 <br />
I have looked everywhere that I can think of to find a list of '''IOfficeAntiVirus providers''' ''(as mentioned in the Bug report)'' that will work with Firefox, so I can't answer that for you.
You might want to ask the developer of the Download Statusbar extension about it. He might know which AV programs are compatible with the Windows API that Firefox uses for the download scan. <br />
http://dlstatusbar.proboards.com/index.cgi? <br /> -
itunes install error message - program not found ...x64/difxinst64.exe
no problems with ITunes on Dell Inspiron Windows 7 until yesterday. ITunes version 11.0.2. iphone won't connect stating required software is not installed. uninstall and install 64 bit version of iTunes. I have 64 bit version already. I have uninstalled and reinstalled 5 times already. When re-installing ITunes get error message c:\programdata\34be82c4-e596-4e99-a191-52c6199ebf6\x64\difxinst64.exe. file does not have a program associated with it for performing this action. please install or create an association in the Default Programs control panel. iTunes install continues after the difxinst64.exe error message but then get the iphone cannot be used error message again. therefore, I can't sync my iphone with iTunes until I figure this out.
can't win for losing. had iTunes on my windows 7 laptop for 4 years. first time I've ever encountered this.I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
[code]
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.exe]
@="exefile"
"Content Type"="application/x-msdownload"
[HKEY_CLASSES_ROOT\.exe\PersistentHandler]
@="{098f2470-bae0-11cd-b579-08002b30bfeb}"
[/code]
Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly. -
Getting error in XI"RFC Program Not Found"
Hi All,
I am getting error in SXMB_MONI "RFC Program not found via SAP XI".
So please suggest me what is the problem behind this..For these SAP XI and R/3 i made 3 to 4 RFC program but only 1 RFC program name not getting Via SAP XI.
Thanks
AmitHi,
I am calling RFC FM via SAP XI.
Main Records are coming from siebel and recevied by SAP XI and XI will do some changes in records and calling REC FM from SAP R/3.
Problem is siebel to xi records coming fine but xi to sap R/3 error message coming "Program not Found".
Thanks
Amit -
MSS: Approve working time Program " " not found error
Hi,
I am able to enter working time and release in ESS. CAT2, CAT4 and CAT6 are also working fine. Im using the Approve Time sheet data iView in MSS to approve working time. Im not sure if I did all the required configuration in IMG Approve working time.But when I click the iView I get a Java exception as shown below. Pl find the ST22 dump also. Can you please let me know
1. What could be the problem.
2.What are minimum configuration to be done in IMG Approve working time.
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Program not found., error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
at com.sap.xss.hr.cat.approve.blc.FcCatApprove.rfcExecute(FcCatApprove.java:307)
at com.sap.xss.hr.cat.approve.blc.FcCatApprove.init(FcCatApprove.java:276)
at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApprove.init(InternalFcCatApprove.java:200)
at com.sap.xss.hr.cat.approve.blc.FcCatApproveInterface.onInit(FcCatApproveInterface.java:136)
at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApproveInterface.onInit(InternalFcCatApproveInterface.java:133)
at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApproveInterface$External.onInit(InternalFcCatApproveInterface.java:313)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
at com.sap.xss.hr.cat.approve.vac.dd.VcCatApproveDrillDownList.onInit(VcCatApproveDrillDownList.java:
ST22 dump
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
caught in
procedure "BUILD_TABLE_STRUCTURE" "(METHOD)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely " ".
However, program " " does not exist in the library.
Possible reasons:
a) Wrong program name specified in an external PERFORM or
SUBMIT or, when defining a new transaction, a new
dialog module or a new function module.
b) Transport error
Regards
SriniStarting a new thread
-
Create_dynamic_table - error "Load program not found"
Hi experts,
i have receive error "Load program not found" at CALL METHOD cl_alv_table_create=>create_dynamic_table
Runtime Error LOAD_PROGRAM_NOT_FOUND
Exception CX_SY_PROGRAM_NOT_FOUND
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_PROGRAM_NOT_FOUND', was
neither
caught nor passed along using a RAISING clause, in the procedure
"FB_TABLE_CREATE_STRING" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely " ".
However, program " " does not exist in the library.
I'm stuck in this annoying problem,,,can anyone help me?Hi Maroz,
I know this is not best practise to post my question in some others, but i have posted it separately earlier
Dynamic ITAB from Excel
I have created a dynamic ITAB from 1 Row of Excel Sheet
LOOP AT ist_excel INTO w_excel WHERE row = 2. " Contains the Values provided in 2nd row of Excel
APPEND w_excel TO row1.
ENDLOOP.
LOOP AT ist_excel INTO w_excel WHERE row = 3. " Contains the Values provided in 3rd row of Excel
APPEND w_excel TO row2.
ENDLOOP.
LOOP AT ist_excel INTO w_excel WHERE row = 4." Contains the Values provided in 4th row of Excel Etc
APPEND w_excel TO row3.
ENDLOOP.
LOOP AT row1 INTO w_excel.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = w_excel-value .
wa_it_fldcat-datatype = 'C'.
wa_it_fldcat-inttype = wa_details-type_kind.
wa_it_fldcat-intlen = 40.
* wa_it_fldcat-decimals = wa_details-decimals.
APPEND wa_it_fldcat TO it_fldcat .
ENDLOOP.
* Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fldcat
IMPORTING
ep_table = new_table.
ASSIGN new_table->* TO <dyn_table>.
* Create dynamic work area and assign to FS
CREATE DATA new_line LIKE LINE OF <dyn_table>.
ASSIGN new_line->* TO <dyn_wa>.
I followed the Link provided by to create a Dynamic ITAB
Please guide me how to pass these Value from excel to Dynamic Internal Table
Warm Regards
Ramchander -
After installing SL: autochk program not found - skipping auto check
My MacBook was setup to dual boot Leopard/Win XP via Boot Camp, but I just formatted the Leopard partition and installed Snow Leopard in its place, which boots wonderfully, but now when I boot Win XP I get this error: "autochk program not found - skipping auto check"
Seconds later the machine automatically reboots.
I booted off the Win XP disk and ran chkdsk /p in the Recovery Console, but the "autochk not found" message still kills the Win XP boot.
Snow Leopard and Win XP are in different partitions on the same drive. I only formatted and reinstalled the Mac OS partition, I did not format or reinstall the Win XP partition.
Help?I have the same problem. I had decided not to upgrade Parallels from version 3.0 since hardly (or almost never) use windows programs any more. I did want the option of using Boot Camp and Windows if ever needed though.
I installed Snow Leopard knowing that Parallels would no longer work and later did an uninstall. When I tried a restart to open Windows from Boot Camp I got the "autochk not found" message.
Searching around I discovered that Parallels changes the disk table so that the OS can only boot from within Parallels. The problem appears to be a way of changing the disk table back to a setting that will make it boot normally. There is a utility available for doing this on a windows PC, but I've found nothing for the Mac yet.
Without doing a complete re-install of Windows OS, I'm stuck for another solution.
In the end I may just have to erase the drive (the Windows partition) and be done with it for good. What upsets me is that Parallels should have created an uninstall utility that reverted the disk table back to normal boot settings. -
Isdelete program not found - Skipping Autocheck
Hi everyone,
After rejuvenating my T61p (Vista Home Premium) this message pops-up during booting:
"Isdelete program not found - skipping Autocheck"
The message appears for a few seconds and then disappears. Booting continues and I do not notice any other symptom on my system.
Has anyone experienced this same issue or knows what the message is all about?
What program is that "Isdelete" and what are the consequences of this "skipping Autocheck" warning?
How serious is this?
Please help.
Solved!
Go to Solution.OK, if anyone ever encounters this issue, I found a solution here:
http://forums.techguy.org/windows-vista-7/583755-solved-solved-lsdelete-program-not.html
It "missing" file seems related somehow to Ad-Aware, which I un-installed recently. The first two letters of the program name (LS) seem to stand for "LavaSoft", which is the publisher of Ad-Aware.
The above linked solution seems to have worked for several other people and it certainly worked for me too -- I got rid of that infamous message... -
CRM 7.0 upgrade ( i5/OS PASE program not found or in use)
Hi,
We are upgrading CRM 5.0 to CRM 7.0 on iSeries (V6r1) and facing the following issue.
When I execute this command
STARTUP SID(CD3) TYPE(ABAP) RESTART(YES) DVDPATH('/Inst_DVDs/51036889')
SAPUPLIB(SAPUP) OPTIONS('jce_policy_zip=/Inst_DVDs/51036889/local_policy.jar')
iSeries show this error message in "UPG_A_CD3" job log.
Message . . . . : i5/OS PASE program not found or in use. Path name is
/usr/sap/CD3/upg/STARTUP.
Does anyone has any idea what could be wrong ?
Thank you,
Jack.Hi,
We are upgrading CRM 5.0 to CRM 7.0 on iSeries (V6r1) and facing the following issue.
When I execute this command
STARTUP SID(CD3) TYPE(ABAP) RESTART(YES) DVDPATH('/Inst_DVDs/51036889')
SAPUPLIB(SAPUP) OPTIONS('jce_policy_zip=/Inst_DVDs/51036889/local_policy.jar')
iSeries show this error message in "UPG_A_CD3" job log.
Message . . . . : i5/OS PASE program not found or in use. Path name is
/usr/sap/CD3/upg/STARTUP.
Does anyone has any idea what could be wrong ?
Thank you,
Jack. -
Hey there, I'm in New Zealand - When purchasing I selected the apparently cheaper option because I already have Acrobat on 3 of my computers... However, the code supplied gives me a message "Serial number is Valid but Qualifying Program not found" Leaves me thinking I was suckered into selecting the wrong product. I need steps to activate Acrobat on my new W8.1 computer without having to buy a license from scratch. I've already paid $220 NZD, how do I upgrade to what I need and pay the difference...???
Not answered
-
G_G_IDOC_REC_ZZINCOT function module not found in ECC 5.0
i am getting the dump.
the fuction module is not presend in ECC 5.0
Runtime Errors CALL_FUNCTION_NOT_FOUND
Exceptn CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 04/05/2007 07:13:25
ShrtText
Function module "G_G_IDOC_REC_ZZINCOT" not found.
What happened?
The function module "G_G_IDOC_REC_ZZINCOT" was called, but cannot be
found in the Function Library.
Error in ABAP application program.
The current ABAP program "SAPLGUIF" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_FUNC',
was neither
caught nor passed along using a RAISING clause, in the procedure
"IDOC_INPUT_GLROLL" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The program "SAPLGUIF" contains a CALL FUNCTION statement. The name
of the function module to be called is "G_G_IDOC_REC_ZZINCOT".
No function module exists with the name "G_G_IDOC_REC_ZZINCOT".
All function modules are stored in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Particular attention should be paid
to upper/lower case and underscores ("_")
b) Transport error
c) If an enqueue/dequeue module has been used, the lock object
may not have been activated (ABAP Dictionary)
may not have been activated (ABAP Dictionary).
How to correct the error
Check the last transports to the R/3 System.
Is the program "SAPLGUIF" currently being changed?
If an enqueue/dequeue module is involved, is the activation
of the lock object missing in the ABAP/4 Dictionary?
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"CALL_FUNCTION_NOT_FOUND" CX_SY_DYN_CALL_ILLEGAL_FUNCC
"SAPLGUIF" or "LGUIFU05"
"IDOC_INPUT_GLROLL"
Function modules with names similar to "G_G_IDOC_REC_ZZINCOT":
G_G_IDOC_REC_COFIT
G_G_IDOC_REC_FILCT
G_G_IDOC_REC_ECMCT
G_G_IDOC_REC_GLPCT
G_G_IDOC_REC_GLT0
G_G_IDOC_REC_SECURE
G_POSTING_ZZINCOT
G_G_IDOC_SEND_COFIT
G_G_IDOC_SEND_ECMCT
G_G_IDOC_SEND_SECURE
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"IDOC_INPUT_GLROLL"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "d48ix100"
Network address.......... "151.162.153.62"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C65EFD4C00"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 2
Short dump setting....... "full"
Database server.......... "d48ix100"
Database type............ "ORACLE"
Database name............ "D48"
Database owner........... "SAPR3"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Nov 5 2006 20:46:58"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "156"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16128
EM....................... 8379856
Heap..................... 0
Page..................... 16384
MM Used.................. 2530176
MM Free.................. 1657232
SAP Release.............. "640"
User and Transaction
Client.............. 010
User................ "OS0730"
Language key........ "E"
Transaction......... "YICUPLD "
Program............. "SAPLGUIF"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLGUIF" in "IDOC_INPUT_GLROLL".
The main program was "Y21091IRECON ".
The termination occurred in line 65 of the source code of the (Include)
program "LGUIFU05"
of the source code of program "LGUIFU05" (when calling the editor 650).
Processing was terminated because the exception "CX_SY_DYN_CALL_ILLEGAL_FUNC"
occurred in the
procedure "IDOC_INPUT_GLROLL" "(FUNCTION)" but was not handled locally, not
declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLGUIF ". Its source code starts in line 5
of the (Include) program "LGUIF$05 ".
Source Code Extract
Line SourceCde
35
36 *Prüfen, ob Customizing richtig eingestellt ist
37 CHECK EXIT IS INITIAL.
38 PERFORM CHECK_CUSTOMIZING USING IDOC_NUMBER.
39
40 *Für Einzelposten neue Belegnummern vergeben
41 CHECK EXIT IS INITIAL.
42 PERFORM NEW_DOCUMENT_NUMBER USING IDOC_NUMBER
43 IDOC_CONTRL-MESTYP.
44
45 *Füllen der Segmentdaten
46 CHECK EXIT IS INITIAL.
47 CLEAR IDOC_SEGMENT. REFRESH IDOC_SEGMENT.
48
49 LOOP AT IDOC_DATA WHERE DOCNUM EQ IDOC_NUMBER.
50 IDOC_SEGMENT = IDOC_DATA.
51 APPEND IDOC_SEGMENT.
52 ENDLOOP.
53
54 *Name des zu rufenden Funktionsbausteines ermitteln
55 ROL_FUNCNAME = 'G_G_IDOC_REC_$'.
56 PERFORM BUILD_ROL_FUNCNAME USING IDOC_NUMBER ROL_FUNCNAME.
57
58 *Funktionsbaustein zum Empfangen des IDOC's aufrufen
59 *Wenn Sender 4.0 System -> Nimm' TAB30, sonst altes TAB
60 IF NOT E1GLTTF-TAB30 IS INITIAL.
61 L_TAB30 = E1GLTTF-TAB30.
62 ELSE.
63 L_TAB30 = E1GLTTF-TAB.
64 ENDIF.
>>>>> CALL FUNCTION ROL_FUNCNAME
66 EXPORTING
67 MESTYP = IDOC_CONTRL-MESTYP
68 DOCNUM = IDOC_NUMBER
69 TAB = L_TAB30
70 TABLES
71 IDOC_SEGMENT = IDOC_SEGMENT
72 IDOC_STATUS = IDOC_STATUS
73 RETURN_VARIABLES = RETURN_VARIABLES.
74
75 ENDLOOP.
76
77 *Keine IDOC's empfangen
78 IF SY-SUBRC NE 0.
79 RAISE WF_ERROR_PROCESS.
80 ELSE.
81 *Prüfen, ob Fehler bei der Verarbeitung der IDOCs aufgetreten sind
82 LOOP AT IDOC_STATUS WHERE MSGTY = 'A'
83 OR MSGTY = 'E'.
84 EXIT.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 2
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY &I think that the FM is a customized one. Correct me if I am wrong. It is quite possible that certain FM's might have been missed out while the new system is built. Here I am assuming that the you are doing an upgrade.
If whatever, I've mentioned above is correct, you can copy the FM and its other components from the old system into the new one, to rectify the error -
I recently responded to a prompt to upgrade Mozilla Firefox and started seeing visual bee in background and got lookup for browser safeguard.com.com failed. Can't get into Firefox. My version is 3.6.12. Help requested. Thanks Keith
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating -
Driver Version Not Found" Error when installing drivers for X-fi Xtreme audio
I recently bought the game Bioshock off steam and have been unable to play as it crashes as soon as I try to launch it. After doing some digging around I found out it was a sound problem. When I was looking at the drivers for my sound card (Sound Blaster X-Fi Xtreme Audio) I noticed that the driver called:?XFXA_PCDRV_LB__04_0079.exe has a fix for Bioshock. However when I install the driver I get the error "Driver version not found". I am positi've it is the correct driver for my sound card. I am on Windows 7 64bit.
Hey!
I have Vista Ultimate x64 and I ran windows update couple days ago. There was a new update for my xtreme audio pci-e. I installed it and now my driver version in creative software update is .3.2. Before i updated i ran creative's own software update. It didn't find any new drivers. I was WTF. I think that new driver fixed my volume problem. I had problem's when there was a deep bass in a song. The sound card lowered volume levels then somehow. Now that happens no more. In vista's device control it shows the driver version as 6.0.0.203. Driver date is 7 october 2008. -
Applications Volume not found in Finder (Mac owner for 3 weeks)
Hi, I goofed today. I had an error in my Verify Disk (Below), so I thought I would boot from my OSX CDs, and fix it in Repair Disk. I ended up actually going through a new installation, choosing the non erase option. (I did not know how to boot from CDs)
However, the install would not complete. I booted from the Backup Drive and that worked well and copied the backup to my Mac HD. (Using Carbon Copy Cloner on a LaCie FireWire Drive)
All seems well except in Finder, when I select Applications, it says Volume not found. However, when I choose Applications from my Macintosh HD Volume, the Applications are there and work fine. Documents, Photos Music is all accessible from Finder left side Icons.
What do I need to do to get my system back to normal?
For future reference, how do I fix the initial problem, and how do I boot from the OS CDs
Thanks for your help
Initial Error Message in Verify Disk
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
Volume Header needs minor repair
The volume The volume sh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repairActually, it sounds like you have some sort of an alias problem. Just exactly where in Finder are you getting the error? Is it the Sidebar? If so, drag the Applications folder out of the Sidebar, it will go "poof"--then just drag the folder from MacHD into the Sidebar.
Francine
Francine
Schwieder
Maybe you are looking for
-
Creative Cloud subscription cancellation
Is there anyway to cancel my subscription to the Creative Cloud without having to deactivate each indvidual software? I deleted everything thinking that would work and that there'd be some way to cancel the subscription on the Adobe website. It'd be
-
SD Billing Document Output to email via external send
Hi all, I hope you can helpt with following issue as I need to send invoices via email using the option 'external send' in the message determination. The settings are as follows: Message Determination VV32/VV33 Output Type ZI04 Billing Type ZIV Condi
-
Saving as DWG in Illustrator CS2 - help!!!
I'm trying to save a file as a .dwg or .dxf in Illustrator CS2. Everytime I save, it creates two files, a .bmp or .jpg and the .dwg or .dxf Does this always happen, the two file situation? Because then the files can't be separated from each other if
-
Whats the Point of Live Chat if
agents are never available? No matter when I try to chat with an agent always get the reply all agents are busy
-
Gurus, Is there a way to preserve the layer structure of a PSD file that is imported into Motion? The PSD is a flat "merged" layer if you will on the timeline. I of course need to manipulate the layers....