Program not running, error -10810

i was using flash on my ibookk G4, they i closed the progam and later tried to work on it again, however this time there appears a window, which reads: An unexpected error has occured, error -10810.
really need help, dunno whats happening with my computer

Irene:
Welcome to Apple Discussions.
I have been unable to determine until now exactly what your error message means. A few questions, if you don't mind.
1. +i was using flash+
By that do you mean a USB jump drive?
2. +i closed the progam and later tried to work on it again+
Can you tell us exactly what program you were working on? And by "closed" do you mean quit? Was this program on the internal HDD or on the "flash drive"?
3. Did you remove the flash drive and replace it?
Before you respond here are a couple of things you can do.
1. *Repair Disk Permissions*
While booted from your internal HDD
Go to (Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left column and First Aid in main column.
Click Repair Disk Permissions at bottom left.
2. Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
Please do post back with responses to my queries and with an update on the procedures above.
Cheers
corneliius

Similar Messages

We are trying to install elements 11 but the program will not run error 213:11

we are trying to install elements 11 but the program will not run error 213:11

http://helpx.adobe.com/creative-suite/kb/error-store-does-not-allow.html

Cannot embed pdfs in MS Word doc which are PDF Version 1.3 (Acrobat 4.x) [This is associated with Adobe Reader 9]. Getting 'program not installed' error.

Cannot embed pdfs in Word doc which are PDF Version 1.3 (Acrobat 4.x) [This is associated with Adobe Reader 9]. Getting 'program not installed' error.
Pdfs with other versions are okay:
Tested successfully with Adobe Pro 9 (Version 1.5 (Acrobat 6.x)), Reader X (Version 1.4 (Acrobat 5.x)) and XI (Version 1.6 (Acrobat 7.x))
Also cannot open embedded pdfs which have been embedded with this version (getting a similar error).
Importantly I have removed/disabled all security options in Adobe Reader, following numerous internet suggestions from Adobe and elsewhere. This does not fix the problem.
Currently the work around is to re-save the pdf with something other than Adobe Reader 9 (so the version updates), but we would prefer not to do this for all the old pdfs we have.
Thank you,
Louise.

Could you please email me the document on which you are seeing this issue at [email protected] ?
Please mention the forum thread link as well in the mail for the reference.
Thanks,
Atul

MSS: Approve working time Program "       " not found error

Hi,
I am able to enter working time and release in ESS. CAT2, CAT4 and CAT6 are also working fine. Im using the Approve Time sheet data iView in MSS to approve working time. Im not sure if I did all the required configuration in IMG Approve working time.But when I click the iView I get a Java exception as shown below. Pl find the ST22 dump also. Can you please let me know
1. What could be the problem.
2.What are minimum configuration to be done in IMG Approve working time.
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Program                                          not found., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.cat.approve.blc.FcCatApprove.rfcExecute(FcCatApprove.java:307)
     at com.sap.xss.hr.cat.approve.blc.FcCatApprove.init(FcCatApprove.java:276)
     at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApprove.init(InternalFcCatApprove.java:200)
     at com.sap.xss.hr.cat.approve.blc.FcCatApproveInterface.onInit(FcCatApproveInterface.java:136)
     at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApproveInterface.onInit(InternalFcCatApproveInterface.java:133)
     at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApproveInterface$External.onInit(InternalFcCatApproveInterface.java:313)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
     at com.sap.xss.hr.cat.approve.vac.dd.VcCatApproveDrillDownList.onInit(VcCatApproveDrillDownList.java:
ST22 dump
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
     caught in
    procedure "BUILD_TABLE_STRUCTURE" "(METHOD)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    On account of a branch in the program
    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
    or a transaction call, another ABAP/4 program
    is to be loaded, namely " ".
However, program " " does not exist in the library.
Possible reasons:
    a) Wrong program name specified in an external PERFORM or
       SUBMIT or, when defining a new transaction, a new
       dialog module or a new function module.
    b) Transport error
Regards
Srini

Starting a new thread

KIMYONG: "Service Component Container Not Running" error 시 조치사항

KIMYONG: "Service Component Container Not Running" error 시 조치사항
Purpose
WF Agent Listener 를 구동하고자 할때 아래 error를 발생하며 멈추게 됩니다.
이를 조치하는 방법은
ERROR
CANNOT START 'WORKFLOW AGENT LISTENER - ERROR:
"THE SERVICE ERROR COMPONENT CONTAINER"
Solution
전체적인 절차는 아래와 같습니다.
1. apache 를 bounce 합니다.
2. Workflow Mailer Service를 시작합니다.
a. Workflow administrator Web Applications Responsibility
b. Workflow Manager
c. Click on Service Components icon
d. Click on the Workflow Mailer Service link (Container column)
e. Select Workflow Mailer Service
f. Select Start from the list of values (top)
g. Click on go.
h. Wait until the Workflow Mailer service is "Activated"
3. Workflow Agent listener Service 를 시작합니다.
a. Workflow administrator Web Applications Responsibility
b. Workflow Manager
c. Click on Service Components icon
d. Click on the Workflow Agent listener Service link (Container column)
e. Select Workflow Agent listener Service
f. Select Start from the list of values (top)
g. Click on go.
h. Wait until the Workflow Agent listener service is "Activated"
4. Workflow Mailer를 시작합니다.
a. Workflow administrator Web Applications Responsibility
b. Workflow Manager
c. Click on Notification Mailers icon
d. Select Workflow Notification Mailer
e. Select Start from the list of values (top)
g. Click on go.
h. Do the same for the workflow deferred agent listener
Reference
Note 559388.1

Hi,
I'm having the same problem as you did.
I've tried pushing the button Go in the Oracle Workflow Manager - Service Components.
And it showed
An error has occurred!
The Service Component Container is not running.
Should I uninstall my Oracle Workflow?
And install a new installation of Oracle Workflow?
What does it mean by the "wfinstall"?
Is it the Oracle Workflow Configuration Assistant? which I can access using the wfinstall.bat.
Or should I replay the Oracle Workflow Configuration Assistant (wfinstall.bat) and choose Upgrade option?
Or should I uninstall all of my Oracle installation and start installing from the beginning?
BTW, what if I don't use (or have) OID?
Is it required?
Any clue would be grateful.
Thanks.
Buntoro

I have a prpblem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

i have a problem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

If you already have IIS web server running, you need to run the LabVIEW web server on a different port to avoid conflicts. It probably won't start because the port 80 is already in use.
Check options.."Web Server: Configuration" within LabVIEW.
LabVIEW Champion . Do more with less code and in less time .

Java program not running by the Ant

i have a small java program.
its a classpath problem.
cant figure out where is the problem.
i am running the code via Ant.
build.xml
<?xml version="1.0"?>
<project name="myproject" basedir="." default="all">
    <property name="src.dir"     value="src"/>
     <property name="classes.dir" value="classes"/>
     <property name="lib.dir"     value="C:/tomcat/webapps/axis/WEB-INF/lib"/>
     <property name="runclass" value="TestClient"/>
     <target name="all" depends="clean,compile"/>
     <target name="clean">
        <delete dir="${classes.dir}"/>
    </target>
    <path id="classpath">
        <fileset dir="${lib.dir}" includes="**/*.jar"/>
    </path>
    <target name="compile">
        <mkdir dir="${classes.dir}"/>
     <javac srcdir="${src.dir}"
      destdir="${classes.dir}"
      deprecation="on"
      debug="on">
   <classpath><path refid="classpath"/></classpath>
</javac>
     </target>
     <target name="run" depends="compile">
   
   <java classname="${runclass}">
        <classpath>
          <pathelement path="${classpath}"/>
          <fileset dir="${lib.dir}">
            <include name="**/*.jar"/>
        </fileset>
          </classpath>
       </java>
</target>
     </project>i invoked
ant runand got this
Buildfile: build.xml
compile:
run:
     [java] Could not find TestClient. Make sure you have it in your classpath
     [java]     at org.apache.tools.ant.taskdefs.ExecuteJava.execute(ExecuteJava
.java:170)
     [java]     at org.apache.tools.ant.taskdefs.Java.run(Java.java:710)
     [java]     at org.apache.tools.ant.taskdefs.Java.executeJava(Java.java:178)
     [java]     at org.apache.tools.ant.taskdefs.Java.execute(Java.java:84)
     [java]     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.ja
va:275)
     [java]     at org.apache.tools.ant.Task.perform(Task.java:364)
     [java]     at org.apache.tools.ant.Target.execute(Target.java:341)
     [java]     at org.apache.tools.ant.Target.performTasks(Target.java:369)
     [java]     at org.apache.tools.ant.Project.executeSortedTargets(Project.jav
a:1216)
     [java]     at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
     [java]     at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(De
faultExecutor.java:40)
     [java]     at org.apache.tools.ant.Project.executeTargets(Project.java:1068
     [java]     at org.apache.tools.ant.Main.runBuild(Main.java:668)
     [java]     at org.apache.tools.ant.Main.startAnt(Main.java:187)
     [java]     at org.apache.tools.ant.launch.Launcher.run(Launcher.java:246)
     [java]     at org.apache.tools.ant.launch.Launcher.main(Launcher.java:67)
BUILD SUCCESSFUL
Total time: 2 secondsso, code is not running......its dfinitely a classpath problem , because error message says "Could not find TestClient. Make sure you have it in your classpat".
TestClient is the name of main class file.
not sure whats wrong with this build.xml ? whats wrong in it ?
one thing , i guess, i did not mention "." , current directory in the build.xml ......is it because of that ?
i browsed apache manual......To Run a Java program.....first, they are making a JAR file ...and then they are executing the JAR.
i really, dont need the JAR file......i just want to run it.....thats enough.
somewhere, i have to do some modification in this buld.xml.......do you have any idea ?
thank you

TestClient folder has
1)src
2)classes
3)build.xml
i have posted the build.xml already.
now, src folder has TestClient.java
TestClient.java
==================
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import javax.xml.namespace.QName;
public class TestClient {
   public static void main(String [] args) {
     try {
       String endpoint =
           "http://ws.apache.org:5049/axis/services/echo";
       Service service = new Service();
       Call     call    = (Call) service.createCall();
       call.setTargetEndpointAddress( new java.net.URL(endpoint) );
       call.setOperationName(new QName("http://soapinterop.org/","echoString"));
       String ret = (String) call.invoke( new Object[] { "Hello!" } );
       System.out.println("Sent 'Hello!', got '" + ret + "'");
     } catch (Exception e) {
       System.err.println(e.toString());
}and i did
ant runand i got those errors.
clearly, its not able to run it.
looked the manual....did not find anything special about java task....still not working.

DB13 - Scheduled Update Statistics not run - Error

Hello gurus,
I´m faccing with an error in DB13, I scheduled Update statistics every day but it did not run due an error.
I think this may resulted because an authorization problem.
In /usr/sap is with this permissions:
drwxr-xr-x 15 orad01 dba   4096 Oct 18 16:34 sap
The /oracle/D01/sapcheck is with the following permissions:
drwxr-xr-x 2 orad01 dba     4096 Nov 14 20:28 sapcheck
Inside of sapcheck directory I can see the following files with permissions:
-rw-r--r-- 1 orad01 dba       32262 Oct 14 13:16 ceeimamu.sta
-rw-r--r-- 1 orad01 dba        2705 Oct 15 17:42 ceeisafo.sta
-rw-r--r-- 1 orad01 dba        2705 Oct 15 17:50 ceeisazq.sta
-rw-r--r-- 1 orad01 dba        1932 Oct 15 17:58 ceeisbie.sta
-rw-r--r-- 1 orad01 dba        1791 Oct 15 22:16 ceeisyhm.sta
-rw-r--r-- 1 orad01 dba        1931 Oct 15 22:24 ceeisyta.sta
-rw-r--r-- 1 orad01 dba    19394261 Oct 15 23:45 ceeiszph.sta
-rw-r--r-- 1 orad01 dba        1930 Nov 9 11:27 ceenjunx.sta
-rw-r--r-- 1 orad01 dba        1790 Nov 9 11:38 ceenjvuv.sta
-rw-r--r-- 1 orad01 dba      143103 Nov 9 11:40 ceenjwnr.sta
-rw-r--r-- 1 d01adm sapsys      521 Nov 16 14:46 ceeosxxw.sta
-rw-r--r-- 1 d01adm sapsys      521 Nov 16 14:49 ceeosydo.sta
-rw-r--r-- 1 d01adm sapsys      521 Nov 16 14:54 ceeosyqi.sta
-rw-r--r-- 1 d01adm sapsys      521 Nov 16 15:57 ceeotefd.sta
-rw-r--r-- 1 orad01 dba       18530 Nov 16 16:27 ceeotgun.sta
-rw-r--r-- 1 orad01 dba         996 Nov 16 16:27 connD01.log
In DB13 at details error, it show the following statements:
Job executado
Etapa 001 executada (program.RSDBAJOB, variante &0000000000016, nome usuário XNSJAD)
Execução do comando lógico BRCONNECT No host segoviad04
Parâmetros: -u / -jid STATS20101123153214 -c -f stats -t ALL
BR0801I BRCONNECT 7.20 (7)
BR0301E SQL error -2133 at location BrOraThrEnable-1, SQL statement:
'ENABLE THREADS'
BR0806I End of BRCONNECT processing: ceeqbmqh.sta2010-11-23 15.32.15
BR0280I BRCONNECT time stamp: 2010-11-23 15.32.15
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job encerrado
Can you help me please!? I do not know how to solve this situation...
Best regards,
João Dimas - Portugal

This wasn´t a new installation... this was a migration from windows/sql server to linux/oracle... and after that migration process I made an oracle upgrade to 11.2g and during this oracle upgrade we upgrade the BRtools to 7.20 version.
I set up other job from DB13 (Verify database) and also it not ran well, it show an error too, but a diferent one:
Parameters:-u / -jid VERIF20101110030000 -c force -w only_dbv -p initD01.sap -m ALL
BR0051I BRBACKUP 7.20 (7)
BR0055I Start of database backup: beeqitms.dbv 2010-11-25 03.00.06
BR0484I BRBACKUP log file: /oracle/D01/sapbackup/beeqitms.dbv
BR0477I Oracle pfile /oracle/D01/112_64/dbs/initD01.ora created from spfile /oracle/D01/112_64/dbs/spfileD01.ora
BR0068E SAP system is running or SAP user is connected to database D01 - database cannot be shut down
BR1025I Please shut down SAP system first or use the 'offline_force' option
BR0056I End of database backup: beeqitms.dbv 2010-11-25 03.00.09
BR0280I BRBACKUP time stamp: 2010-11-25 03.00.09
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
I also checked the permissions in /usr/sap folder and sub folders as per the link you put here... and everything is well... but tell me one thing which owner/group must have set in /usr/sap/ directory? In that help sap link it doesn´t show any suggestion in this column, so I don´t know in this case which owner and group must have set... In my case the /usr/sap/ and dba as group:
drwxr-xr-x 28 orad01 dba      4096 Nov 23 15:20 D01
Kind regards,
João Dimas - Portugal

Finder not opening/ Error 10810

Hey!
I have recently update Mac OS X to 10.6.6 from 10.6.2. It's been running great, but after quitting an app from the Mac App store, Finder just did not appear. The toolbar on the top of the screen was not appearing, and when clicked the Finder icon on the dock, it gave a message: "Finder.app cannot open -10810". I had no other choice than to Force Shut down my computer my holding the power button on my computer. After restarting, I was able to open Safari, but Finder would still not open. I force shut down my machine again and the sane problem happened again! I read a couple of posts on the discussion board and tried to turn it off (not the way I would like to turn off my beloved iMac :P) and disconnected my external hard drive. I turned it on and it's working fine...
HELP PLEASE!
Christopher

See Finder Error -10810 in Snow Leopard causing problems and:
The following have been suggested as possible solutions:
1. If you're using 10.3, you need to get rid of the following:
/Library/Caches/com.apple.LaunchServices.6B.csstore
~/Library/Preferences/com.apple.LaunchServices.plist
(where '~' means your Home directory, i.e. '/Users/yourname')
2. If you have Virex or other virus software installed, try uninstalling it. Be sure to use uninstallers that come with the software because simply deleting the application does not fully uninstall most virus software.
After deleting the referenced files above you will want to do a restart. Then use Disk Utility in your Utilities folder to repair permissions.
The problem can also be caused by USB drives connected to the computer and/or third-party modifications to one or both of the USB drivers in the /System/Library/Extensions/ folders. If you have any third-party USB drivers installed try booting into safe mode to see if that eliminates the error.
In general restarting the computer should resolve the error, but if it's being caused by other software installed then the error will recur eventually.

C program not running from terminal as expected

Hi everyone
I am starting C programming as part of my university degree, I understand most of the content so far. I am compiling and running my program in Terminal and I am having a small amount of trouble with running it. Here is how I have set my program up:
• Created folder named "C" on the desktop
• Opened terminal and changed the directory by using the following command: cd /Users/jc/Desktop/C, the directory is changed as the terminal output reads:
JCs-MacBook-Pro:C jc$
• Created main.c file
• Compiled fine in terminal by using: cc main.c
Here is where it breaks down, typing a.out does not run the program (as I expected) but returns the error: "-bash: a.out: command not found", if I drag the file to terminal or type out the absolute path and execute the program runs fine. What is happening and how do I fix it so typing just a.out runs the program?
Thanks in Advance
J.C

The commands to add a folder to your search path (if you haven't changed your shell from the default bash) are:
PATH=$PATH:<absolute path to parent folder>/MyProjectFolder
export PATH
Typing the above at your terminal prompt should allow you to execute your programs without typing ./a.out, but only for the life of the current terminal session (You can type 'printenv' or 'echo $PATH' to verify that your folder was added correctly).
If you wish to add your folder automatically to any terminal session, the above should be saved in a text file named '.profile' in your home folder (the folder you're in when you start Terminal, e.g. /users/raynewbie).
If you wish to add whatever folder is current (wherever I am right now) to your permanent search path, insert the following into .profile:
PATH=$PATH:.
export PATH
The above has the disadvantage of being less secure on multiuser systems. The current, "dot", directory used to be first in the default Unix search path. But when I was in school (during the Lincoln administration) our favorite sport was trying to hack root perms by placing our own version of 'ls' in directories frequented by superusers. Higher powers caught on to this after only a few years and newer systems required you to type the dot.

Graphical programs not running--need help

Using win98 platform, textpad, and jdk1.5.0...
DOS programs run fine, however, graphical applications do not run--it goes to the DOS window and brings up strings of stuff instead.
When I compile, the error message that generally shows:
Note: C:\jdk1.5.0\demo\...java uses or overrides a depreciated API
Note: Recompile with -Xlint: depreciation for details.
And for applets, this line also existed on a demo:
Note: C:\jdk1.5.0\demo\applets\Animator\Animator.java uses unchecked or unsafe operations.
Note: Recompile with -Xlint: unchecked for details.
Anybody know what to do here? I'm just learning java from books, but I need to be able to run java applications in order to get a feel for the code. Help would be appreciated.

If anyone deems it a necessity, here is an example of simple code that will throw this problem:
(sorry-under win98 2nd ed.)
import java.event.*;
import javax.swing.*;
class CloseableFrame extends JFrame
{ public CloseableFrame()
{ setTitle("Closeable Frame");
setSize(300,200);
addWindowListener(new WindowAdaptor()
{ public void windowClosing(WindowEvent e)
{ System.exit(0);
public class CloseableTest
{ public static void main(String[] args)
{ JFrame frame = new CloseableFrame();
frame.show();
}

CPIC-CALL Transaction program not registered Error while creating RFC Desti

Hi All,
I am trying to create a new RFC Destination.
Details I have provided are..
1.RFC Destination Name
2.Connection Type - TCP/IP
3.Description
4. Activation Type - Registered Server Program.
5.Program Id.
6. Gateway Host and Gateway Service.
But When I Test the connection, I am getting the following error.
<b>" program xyz not registered / CPIC-CALL: 'ThSAPECMINIT'# Transaction program not registered"</b>
However I was able to create and connect RFC Destinations successfully previously.
I am not SAP guy. Could someone help resolve this issue.
Thanks,
Phani

hi Sekhar,
I request you to please help me out in this issue. I am getting similar kind of problem. I am trying to replicate the customer from CRM to R/3 and i get a bdoc message in SMW01 that "RFC connection failed please press the save button again". When the basis team further investigated they came up with the below error..
User: CRREMOTE (Client: 071)
Destination: OCR (handle: 1, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1462
CPIC-CALL: 'ThSAPECMINIT'
Transaction program not registered
DEST =OCR
HOST =%%RFCSERVER%%
PROG =dpssrfc
Trace file opened at 20061121 140451 EST SAP-REL 640,0,109 RFC-VER
3 804778
resize I/O buffer to 28000 bytes
>>>> [2] MQ_LINK : TCP <ac: 3> K %%RFCSERVER%% >>> OPEN
{45632F14-288E-0046-0000-0000A888A7AA}-
======> CPIC-CALL: 'ThSAPECMINIT'
can you please tell me where can be probelm. Regarding your message, where can i get the communication channel to assign the program id.
Awaiting your reply,
Thanks & Regards,
Yogesh

LabVIEW Program not running if i lock my PC (using an EXE made from LabVIEW)

Hi everyone
I observed some odd behavior when I was running my program on a PC. I prepared an EXE for a LabVIEW program, this am running on another PC. Purpose of the program is to read a text file and follow the command given in that text document, we are accessing parallel port, calling third party EXEs in this. It is not running when I minimize the window or lock the PC. Do we have any property in VI properties for this?
Please help me in this.
Thanks
Anil

Hi Anil,
Minimizing the application or locking Windows should not stop the executable from running. Can you reproduce this behavior on the development PC? Also try to create an executable with a simple VI that counts the number of iteration and check for this behavior ?
Tunde.

Programs not running in leopard

my adobe creative suite and office:mac v.X are not running after installation of leopard, which i bought to use with my 16gb iphone. suggestions?

Java Preferences can be found using Spotlight.
Update your Java 6 as previously instructed as it's supplies security fixes.
Java 7 and above is for 10.7 and above, Oracle is dropping support for Java 6.
However all versions of Java have been HIGHLY insecure, so it's advised not to use them at all
If your using Java based programs (like the free LibreOffice) then certainly disable Java in all web browsers and applets in Java Preferences.
Apple has a now annual OS X upgrade cycle that is causing havoc and disqualifying older, but perfectly working machines from running necessary software and dragging third party developers along.
So one shouldn't be running Safari (outdated and no Safari 6), Java 6, very possibly Chrome on OS x 10.6.8, but if you upgrade to 10.7 or above, your machine will perform slower and all your PPC based software will no longer continue to function.
It's sad, because OS X Snow Leopard has 1/4 OS X market share still and many can't upgrade because developers are not issuing 10.7/10.8 versions of their software because of AppStore and Gatekeeper signaling the closing of the operating system in the future.
The 10 year support cycle of Windows versions sounds like blessed relief compared to Apple's annual OS X upgrade nightmare.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still

ContentAgent not found error OR qmasterd not running error in Compressor

Hi guys,
I have problems with Compressor 3.0.1 (related to qmaster i guess). i red many articles around about "qmasterd not running" or, "ContentAgent not found" error message on Compressor.
I tried to run it from apple qmaster in the preferences system but the same problem. i tried to launch qmasterd in command line ... no success. I erased anything with the name qmaster or compressor (preferences, Applications support, Receips, repaired authorisations, etc...) and made a brand new install from the original DVD).
Before doing that, compressor wasn't even lauching successfully. After this re-install, it is running but i get these errors from one or the other side. I can say that i erased all related files with attention but still do not understand what to do!
on my anotyher mac (intel based 2x3GHz dual core) everything is running fine.
Do someones know what can cause this ? what should i do ? i prefer a solution without beeing obliged to reinstall the whole config!!! oh no!
Thank you for your help, even a small one
Best Regards
Sam

I told myself: let's do it once again and this time ERASE ALL
In my last try, i had forgot to erase compressor.framework folder with all its contents.
Now, it is working just perfect, even the cluster between both computers
Best.R.
Sam

Program not running, error -10810

Similar Messages

Maybe you are looking for