Program panel automatically shows up in front when playing

Hello, when I'm in my sequence panel in my Premiere Pro CC 2014 and I click on play, the program panel automatically shows up on top in front of all other panels in this frame. I want to show up the audio track mixer panel in front of all other panels in this frame, but when playing it always jumps back to the program panel. How can I disable this? Thanks.

Please see this thread: Program monitor during playback in always in focus; preventing effects panel or mixer to be seen

Similar Messages

  • Can't down load programs it keeps showing old email address when new one has been verified

    Any suggestion on how to correct this concern still show old email address when trying to down load update apps new one has been verified. I can't do updates

    Go here > Apple - My Apple ID

  • IPod Touch shows the wrong artwork when playing songs

    Recently my iPod Touch has just decided to display all the wrong artwork when playing songs. For example I will be listening to Chris Brown and It will be showing a picture of a Jay-Z album. How do I fix this?!
    I've read that all you have to do is 'uncheck "display album artwork" in the music preferences section when your iPod is connected and click "apply". Then sync your iPod.'.. however I manually add the songs onto my iPod so I can't uncheck the music option as it's already unchecked!
    Please help, my iPod looks so ugly showing the wrong artwork lol

    First:
    SOLUTION(FIX): Editing Song titles and...: Apple Support Communities
    Then:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • How do I set up my apple laptop to automatically show the active screen when attaching a HDMI cable to my TV

    When using HDMI cable to TV how do I set up to automatically display the active laptop screen so that I don't have to drag to TV

    You have the display set in Extended Desktop mode with the MacBook as the main screen. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen.
    In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen.
    The TV will now have the Dock and Menu Bar and windows will open on it. But you can move the cursor to the MacBook screen and move windows from the TV over to the MacBook screen.
    You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
    Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box. That will give you the same screen at the same resolution on both the MacBook and the external monitor.

  • HT201335 I want to watch an iTunes rental video on my MacBook Pro but stream the sound to my Airport Express linked speakers.  However re Airplay icon doesn't show up in iTunes when playing the rental video.  Is there a way around that?

    I want to watch an iTunes rental video on my MacBook Pro but AirPlay the audio to my AirPort Express linked speakers.  However the AirPlay icon isn't available when arching the rental video in iTunes.   Is there another way?  Do I need to but an AppleTV?  I don't own a TV, hence why I want to watch on my MacBook Pro.

    Welcome to the Apple Community.
    With or without an Apple TV you can't send video to one device and audio to another using AirPlay.

  • My iphone 4S doesn't show the volume controls when playing videos and the speakers don't sound. But if I plug in the earphones then I can hear fine and the volume controls appear on screen. Please someone help.

    After a week or so of installing IOS 7 now I having this problem, the speakers don't work for videos, music or apps sounds, but they work fine for using the speaker phone. It's definitely some software issue as the volume control appears when i plug in the earphones, but disappears when unplugging them, same happens with the volume buttons on the side, they don't work when trying to use the speakers, but the work when using the earphones. Please help if you have a workaround for this. I don't want to carry my earphones all the time to listen to videos and music.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Firefox is automatically decreasing the system volume when playing media

    everytime i load a site that has music/media on it (youtube etc) whilst i'm watching videos in mplayer, miro or vlc the system volume for that sound 'device' (in the windows 7 sound mixer) will be lowered

    Try to clear the Flash cookies and settings.
    Flash Local Storage - http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
    If that didn't help then try to delete the macromedia.com and #SharedObjects folders to reset all Flash cookies and settings.
    XP: C:\Documents and Settings\<user>\Application Data\Macromedia\Flash Player\
    Vista: C:\Users\<user>\AppData\Roaming\Macromedia\Flash Player\
    "Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders, use %APPDATA% in the File name field.
    See also http://kb.mozillazine.org/Show_hidden_files_and_folders

  • How get multiclips to stay in viewer when playing/editing in timeline?

    I just started editing in multiclip. I can get my 3 multiclip clips to show in the Viewer on a 4-up display, but when I play the Timeline, the Viewer jumps to full frame active view. I've set the RT at Multiclip Playback, set the Open option on the Playhead Sync menu, and set Multi-clip 4-up Display. What am I doing wrong or missing?
    How can I get the multiclips 4-up display to stay in the Viewer when I play the Timeline?
    Thanks,
    Duncan
    Mac Pro Mac OS X (10.4.10) 2 750 HDs, 1 500 HD, 1 1T HD

    There are 2 things to check.
    1. Has your timeline been rendered? I ask this because I was given a 3 camera multiclip project from another editor here, and with all of my settings checked, I still couldn't get the multiclips to show on my external when playing back. Once playback was stopped or the playhead scrubbed, then the 4-up display would return. Just for kicks, I cleared his render cache and bingo, 4-up returned on playback.
    2. In the View menu, is "Show Multiclip Angles" checked? (It's at the very bottom of the menu).

  • HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

    I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    3. Other issues
    If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

  • Screen capture of the front panel automatically

    I've got a VI that analyzes a data file and outputs a graph, some numbers/notes, and a pass/fail message to the front panel each time we run it. I want to be able to automatically save all that data into one easy-to-access file (no html) after running it, and ideally this would be accomplished by just capturing the screen of the front panel and saving it as a .jpg.
    I've looked up how to do this on the forums and searching the web, but no solutions have come up. I've looked at the "Get Image" method, but that only lets me get the image of one object in the front panel, and not the entire front panel screen. I read something about referencing the front panel as an global, and inputting that into the "Get Image" method, but I can't get that to work and don't know if that's possible.
    Is there a way to make a straightforward automatic screen capture of the VI front panel? How can I program that?  (Manually using the "pinrt screen" function off the keyboard and copying and pasting it won't be feasible for this application).
    -- Thanks for the guidance

    No sure why you couldn't find a reference to it but there is the VI method Get Panel Image.
    Message Edited by Dennis Knutson on 03-16-2007 07:42 AM
    Attachments:
    Get Panel Image.PNG ‏4 KB

  • How do i stop my programs from automatically popping up when i turn on the computer?

    how do i stop my programs from automatically popping up when i turn on the computer?

    When you log out or shut down, there will be a checkbox that asks you if you want to reopen windows when you log in. Just uncheck this box. If that isn't it, you may have login items turned on. Go to System Preferences>Users and Groups and then under your name click the Login Itens tab. Make sure nothing is there.
    If you want to stop windows from restoring when you open applications (so for example when you open Safari it doesn't open the 50 tab page you just had open when you quit) go to SystemPreferences>General and then hit the checkbox that says Close windows when quitting an application.

  • How do I stop the iMessage conversation from automatically showing when I go into the I message center? I only want the contacts to show down the left side and nothing on the right until I select a conversation to view.

    HOW DO I STOP THE WHOLE IMESSAGE CONVERSATION FROM AUTOMATICALLY SHOWING WHEN I GO INTO IMESSAGE? I only want the contact bar on the left to show and not the whole conversation, until I pick one to see.

    You can't. You can sign out of messages and turn it off, but you can't do what you would like to do. You can send feedback to Apple.
    https://www.apple.com/feedback/ipad.html

  • How can java programs execute automatically when it connects to network

    Good Day dears...
    How can java programs execute automatically when it connects to network.
    Thanks in Advance friends Shackir

    884924 wrote:
    Good Day dears...
    How can java programs execute automatically when it connects to network.What is "it"? That is, execute when what connects to the network?
    Your computer? If that's what you mean, this is not a Java question. It's an OS operational/administrative question. Executing any program, whether written in Java or not, based on some system event has to do with that system, not with the program. If it's possible to do this, you'd do it exactly the same way for a Java program as you would for any other program.
    Or is "it" the program itself? If this is what you mean, then it's a nonsensical question. For the program to connect to the network and detect that it has connected to the network, it must already be executing, so asking how to execute it at that point is meaningless.
    Finally, I'll point out that "connecting to the network" is a pretty meaningless phrase. Or rather, it has so many potentially valid meanings that it's impossible to know which one you're referring to when you use that phrase. And I'd be willing to bet you don't have a clear picture of that yourself.

  • In the Program Panel, when I click the Spacebar (i.e., "Play"), the image does not advance.

    In the Program Panel, when I click the Spacebar (i.e., "Play"), the image does not advance. When I click "Play" again (i.e., "Stop"), the still image confirms that we have moved on. Please, What must I do so that when I click the Spacebar (i.e., "Play"), the image does indeed advance? Thanks!

    This pertains to Adobe Premiere Pro CS6:
    Thanks for your prompt reply. This is my first post and I appreciate your patience. I imported media into the Project Panel. From there, I placed a few clips into a sequence in the Timeline. In the Timeline, I clicked on a clip. I then double clicked in Program Panel, and could then see the clip. However, when I click on the space bar, (i.e., "Play") in the Program Panel, the image in that panel does not advance. When I click "Play" again (i.e., "Stop"), the still image confirms that we have moved on a bit in the footage. (The audio plays normally, confirming that we are advancing in time. )
    I want to be able to press the space bar in the Program Panel and to see the "motion picture" in the Program Panel.
    Please, What must I do so that when I click the Spacebar (i.e., "Play") in the Program Panel, the image does indeed advance? Thanks!
    Not sure I yet have the capabibility of providing a URL of the problem. 
    Thanks for your guidance,
    David

  • I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down

    Elements 10 was deactivated on desktop and installed on new laptop.  Have on
    y used it for photo editing until yesterday. Created a slide show with music but every time I try to burn to cd or move it to hard drive after about 15 sec, it says windows has encountered a problem with this program and must shut down.
    I Also can't sign in to adobe with the program. It simply spins and I had to force close the program.
    help!?

    I am using photoshop Elements 10 under the create tab...slide show.
    Used it on my desktop several times. Deactivated it and installed on new lap top about 5 months ago.  Had not used it other than for photo editing until today.
    I can also not login in thru the program. It simply spins and I finally had to force close the program
    Toni V. Sloan
    Sent from my iPad
    On Jun 27, 2014, at 7:03 PM, Chris Cox <[email protected]>
    I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down
    created by Chris Cox in Photoshop General Discussion - View the full discussion
    Photoshop doesn't do slideshows… What software are you using?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6504356#6504356
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Maybe you are looking for