Program position with any currency for availability check - PS/IM

Hi,
I have the following scenario:
1. Controlling area currency is USD. Local currency is BRL. We do purchase req.(CJ20n) for materials and services in USD, BRL and EUR. The P.O. is done in a second moment through MM.
2. Investment program uses USD for checking availability control. The currency for any program position is also USD.
3. System performs the availability control using exchange rate cat. "M" in OB08. We buy within one of those 3 currencies (USD, BRL and EUR), it translates to USD, and then we see how much was committed in USD.
Because of these differences between dates in exchange rates, the client wants the system to perform availability check with any currency.
For exemple: if we have USD 1000 in program position on 04.15.09 at rate of BRL 2,40 we would have BRL 2400 to purchase. If the P.O. is posted in a different date with a different exchange rate we would have more (or less) value to purchase depending on the rate, say 06.15.09 rate is 3,0 we would have BRL 3000 in local currency.
The client doesn't want this to happen. they want to commit only the first value.
They want that in IM program position would have for branch XYZ 3 different limits, one for each currency say 1000 USD, 2000 BRL and 1000 EUR. When P.R. is done it would check what currency is buying, perform availabilty check and then commit only the value requested and avoid increase or decrease values in local currency.
As long as I know IM standard doesn't work this way. Some thoughts and ideas would be a great help.
Best Regards,
Ubiratan Chaves.

Hi Ubiratan,
I understand that you are doing availability control on USD (controlling area currency), although the statement in your point 2. should be corrected - the availability control is not tied to the IM program but to the budget profile used in the project...
Availability control per transaction currency is not possible...you can have availability in controlling area currency, as you have...or in object currency (which for a project in your case would have to be local currency)...you can try this, but it only works if your project hierarchy is using the same currency (I just faced a similar issue and had to also use USD because the proejct had multicurrency WBS in it...)
Bottom line...maybe you can try "adjust" the budget to the currency fluctuations with transaction IMCRC3...the idea would be to use a specific exchange rate type that has the current exchange rate and run this transaction to "trim" the budget to the real exchange rate...
hope it helps,
Luis

Similar Messages

Bapi for availability check in VL03n

Hi all,
Is there any bapi for availability check in VL03n??
points will be rewarded.
Regards
madhu

Goto esnips.com
search for bapi
u can get
REWARD POINTS...

Custom program for availability check and update for existing sale order at Item level(VA02)

Hi,
I came to know Bapi_Saleorder_Simulate can be used for availability check and update an existing sale order.but there is no sample program explaining the process.I have tried this by passing parameters ORDER_HEADER_IN , ORDER_ITEMS_IN ,ORDER_PARTNERS and ORDER_SCHEDULE_EX(for getting details),also i have assigned the sale document number ,custom document type(ZSO) in ORDER_HEADER_IN . while executing the BAPI I am getting the error external number range is not assigned for the document type ZSO . I am confused on seeing this error. It is possible to do availability check for existing sale order using this BAPI. Please explain how to achieve this.It will be really helpful if it is expalained with an example.
Regards,
Shanmuga

Hello, I think you may have been misinformed about this BAPI updating a sales order at item level. As far as I understand it this BAPI can be used to simulate the creation of a sales order which obviously would include and ATP check. This is why it is giving the error because it is simulating creation but you are entering a value in a field that should be automatically generated (i.e. the sales order number). For change the sales order at item level have you looked at BAPI_SALESORDER_CHANGE? I pretty sure this BAPI both updates sales order (header or item level) and can do an ATP first.
Points are always welcome if you feel an answer has been helpful.

Are there any recommendations for virus checking/removal programs for the Mac?

Is there any recommendations for virus checking/removal programs for the iMac and MacBrook Pro running OS 10.6.7?

as has been said, you need no AV on your Mac. more info here: Mac Virus/Malware Info.
if, however, you exchange files with windows users on a regular basis, you might want to install ClamXav lest you pass an infected file on without realizing it.

Please tell me configuration settings for Availability check

HI gurus,
Please telllme configuration settings for Availability check
regards
DVSK

Please read the "Rules and Regulations" of the forum b4 posting any question. This topic was discussed in this forum quite frequently and had you taken efforts to search, you would have got it.
Please check this thread
[can any body explain the configuration settings of AVAILABILITY CHECK|can any body explain the configuration settings of AVAILABILITY CHECK with.]
thanks
G. Lakshmipathi

Invoice posting with different currency for the same PO

Hi,
Can we post the the Invoice with different currencies for the same PO.
For example.
PO has Qty 100 pcs. amount 100 USD
GR Qty 100 pcs.
Is it possible to post Invoice of 50 pc with 50 USD, and 50pcs with some other currency.
Any sugggestions pls.
Thanks,
Satya

Hello
As per my knowledge, that is not possible.
And in whjat scenario, we need to do that?
In MIRO header itself we have the vendor currency, so it is not posbile to maintain different currency in different line items in MIRO.
If you want, you can do MIRO in different currency that what is in PO.
In the example given, you have o post 2 invoices, one for 50 qty in USD and the other 50 in different currency in other invoice transaction by giving the currency in basic data-invoice header and then only press ENTER after giving the PO number.
Hope this helps
Regards

MB24 - Quantity for availability check

Can anybody explain 'Quantity for availability check' in MB24 (reservation list)
It is not the quantity available. Then can include a column which will show actual available quantity as unrestricated stock in the same report ?

hi Balaji,
Choose Logistics or Accounting -> Project System ->Material ->Execution -> Delivery from project.
An entry screen appears.
Enter the project definition, for which you want to see the deliveries that have been created.
Choose Deliveries.
An overview of the deliveries appears.
Select a delivery and choose Select.
An overview appears with the quantities of the delivery items.
I hope you get your question resolved....
AWARD AND HELP....
Regards,
Priyanka.P

ATP Buckets of Global settings for Availability check

Hi ALL
I have changed the Bucket Parameters and activated ATP time series in Global Settings for Availability Check in Devolpment Server.
I try to transport these settings but ATP Buckets (Active) are not transprting to the Quality.
Please give your suggestions , how to transport these settings to the quality and prodction envirorment?
Thanks
Kanth

Hi Datta,
Thanks for your time and reply.
There is a requirement before you transfer changes to ATP bucket paramters .
>Can you please eloborate your above statment.
Make sure that the updating of ATP time series is activated in Quality and also in production system.
You set this indicator in Model and Planning Version Management from the SAP Easy Access screen by choosing Master Data -> Planning Version Management -> Model and Version Management.
>You mean that i need to activate ATP Time series in all envirorments for which i need to delete the version.In our process already PPDS was implemented and running in Production.We cannot delete the active version.
These settings are not transpotable?
Regards
Kanth

Column 'Qty for availability check' in MB24

Can somebody tell what is the logic for calculating column 'Qty for availability check' in MB24.

Hi,
This quantity comes from table RESB.
In RESB, it is updated at the time of Creation/Change of Reservation logic: stock available in unrestricted - reserved.

Create Documents with any Currency

Hi,
it´s possible create documents with SDK objects in any currency?
I need create a invoice in Local Currency or System Currency depending the source.

Hi Victor,
Yes, you can create marketing documents through the DI API and set any currency code (...well, any currency code that already exists in the company setup). The Documents object has a DocCurrency and DocRate property for defining the currency.
Kind Regards,
Owen

Query with different currency for different users

Hi at all,
just a crazy thing happened. I created a query. Every user gets the result with the currency EURO.
Only one user here gets the country currency like US$, Francs etc.
If he logs in on a different PC, he also gets EURO.
So I think the problem is because of his PC.
I already checked his user data in SAP and BW.
And he really uses the same query with the same filters...
Thanks for helping...
Kind regards from totally confused Marielle

Hi,
Check the Front end Patch levels on both the machines. If they are different, then you can decide what you want to do, either upgrade it on other PCs or not use the one that has it.
Cheers,
Kedar

User exit for availability check.

Hi Friends
We are maintaining a Z table for combination of values of plant and order type.
It is required that while creating a order through IW31 for a plant and order type combination, the system should check the Z table for these values. If present, then standard availability check should be disabled for this order.
Is there any user exit to accomplish the same.
TIA.

Hi,
Check
IWO10009 PM Order: Customer Check for 'Save' Event.
I would suggest u to check this link :Re: Component split in WO based on availability check.
regards
pushpa

Design for Availability Check for the Receiver System

Hi,
Scenario: Request has to be diverted depending on the availability of receiver System.
Design: During Runtime, we will make RFC Lookup call in mapping to Receiver System, to check it availability and accordingly I will determine the Receiver.
Issue: We had the Receiver System Up, the Availability Check using Lookup to Primary Receiver system was successful, but due to table lock issues in the receiver system, request for RFC and Proxies was not responded back. So we got call dumped in PI saying service unavailable exception.
Is there any better design for to handle this kind of scenarios, inorder to have functionality available round the clock?
Regards,
Manikandan R

Hi Mani,
You need to identify the availability of the system at mapping level only,i think the approch is to write UDF or simle JAVA Map to check the availability and return same status out put based on that you can route the message.
use wait step in BPM give some particular time to wait,then process the message,in this case we are going check only once. if you want check repeatedly use loop and put your mappingt,but this is not at all adviceble.
other way develop scenario ,if system down means communication channel throws error,based on that raise a alert,so that appropriate people will take action.
but most of cases availability of system is 24 hours , but i am not sure about your case.raising alert is the good idea.
Regards,
Raj

F110 Payment with different currencies for a vendor

We want to run a payment in transaction F110, where we have different currencies for the same vendor.
An example: We have a debit invoice on 100 € and a credit memo on 50 SEK.
When the payment is run, the currencies are not summarized into one record but two separate. One for each currency. We would like to have it in one record. Is this possible?

Hi
you can adjust the payment currency for one of them to be in same currency as the another one and you will see at F110 that the program read both document in same currency
Regards
Mahmoud EL Nady

Materials in stock at u loc consider for Availability check but not for MRP

Dear ALL,
Please solved the problem by settings in the customizing we are able to set the materials at stock U location (serviceable )should not be considered in Mat Availability for PM orders
Settings we have made for all storage locations in U * By excluding storage location stock from MRP
If storage location stock is excluded from MRP at plant level, no receipts for this storage location will be created in the planning run.
so we are able to run the availability check perfectly
But now MM dept.is not accepting this as they want this stock to be considered for MRP
Has anybody done this scenrio successfully please reply the solution
Regards
Pratap

A way that I think of, is to set the ATP at SL level, so in PM order you check only in a specific location, not in all the plant.
Of course that you need to let all SLs to be relevant for MRP, otherwise this stock is not considered for planning.

Program position with any currency for availability check - PS/IM

Similar Messages

Maybe you are looking for