Program RCCLTRAN is locking the changes of the Production Orders

Hello,
I am encountering an issue, the standard program RCCLTRAN which read production order and create idocs are locking the changes made in APO. The message specifies: "Changes to Order 1XXXX are not transferred".
May I know if there is a User Exit that could be implemented that will not affect the planning activities of the planners when the program is running simultaneously?
Thanks for your support!
Nap

Hi Nap,
I am not familiar with the program that you mentioned.
However I think it should still be possible to give some guidance if you can share the following information:
1) Using RCCLTRAN, where do you send the Idocs to?
2) The error that you mentioned - Is it appearing in APO or is it appearing in R/3 when this program RCCLTRAN is running in R/3, and some planners are sending planned orders from APO?
PS: In standard SAP, it's not possible that 2 users make changes simultaneously to the same document, and this is not advisable also. So I hope you are not requesting for this.
Regards - Pawan

Similar Messages

Track the changes in the entries of the table

Hi,
How to c when and by whom the stnadard table has been modified.
Through SPRO some changes are done which are getting reflected in a standard table.
Though Log data changes in the technical settings of the Table in se11 is checked, im not able to c the changes using the tcode scu3.It displays "No logs Found" .
I tried to search the tables CDHDR and CDPOS,but of no use.
Please give some inputs in this regard.
Thanks in Advance.
Dharani.

Dharani,
Just some additional info:-
Open the table in SE11.
go to Utilities in the Menu bar
click onVersions- versions management
You will be able to see the current active version which is indicated by a tick mark in the extreme left.
Down that you will be able to see the previous version
Now select this previous verion.(i mean tick it).
press f8 or the button with two down arrows to compare.
In this way you will be able to see even the modification too which are highlighted.
The same applies to programs in se38 too.
K.Kiran.

All default routing value has to be changed, while changed the work center in production order

Dear friends,
our client they want to change the work center in production order.according to production version work center also they are changed.so while change the WC,all the default value has be changed as per routing what we maintained in routing.At present we have to enter the manually change the W.C as well as set up time and operation time enter manually.Any other option to do the automatically capture value from routing while change in Work center in production order.pl help me on this.
Thanks&Regards
Sabhapathy R

Hi Rahul,
Thanks for reply. I am maintained in diff value maintained routing , Ex :First routing i have work center 'X' value maintained as a setup time in 15 Min's and operation time 10 Min's
second work center 'Y' I have maintained as set up time 10 Min's and operation time 30 Min's,
Now I want to change the work center in production order as a 'Y' so whatever value maintained in routing , it has to be changed automatically (10 min's and 30 Min's), but system will not change only old value only picked (15Min's AND 10 Min's).
Now I think you get to know what the client requirement, kindly do the need full.
Regards,
Sabhapathy R

How to change the status of a production order

Dear All,
May i know how to change the status of a production order.I want to de-active the status like OPGN (Operation generated).This status is updated as there was no routing assigned to that particular production order during its creation
Thanks and Regards,
Varun Siddharth

Dear,
When you create a production order, an operation created by the system is generated automatically if no routing is used for the creation. As a result the order header receives the status HOGAN; the operation created automatically also has this status.
If you delete the operation created automatically and then do not have the status HOGAN.
To avoid this maintain the Routing for the material or delete the setting of default operation from OPJG.
Regards,
R.Brahmankar

How to get the Change node in Production Server!!!!!

Hi Guys,
Kindly let me know how to get the Change node in Production Server for the Transaction Code Pe03 for generating the Acknowledgement No for the year 2008 .
Plz provide me the steps how to get the Change Node for Acknowledgement No so tat i can get the configuration done.
Regards
Ansuman Mohanty.

Hi Mr!
If you want to generate the e-file feature 40ACK, do it in our Customization client box (Golden box) & save the request & move to Quality & production.
Still if you need to workout only in Production, than with the help of Basis people you can get the Production change mode for 5 to 10 min time & can generate it. But mostly Basis people wont give us change mode for Production box ... with ur request they can do..try it.
Did u collected 4 quarter TAN no's for 2008 Quarter...if not collect it & generate it at a time.
All the best:-)
Kind Regards,
Saisree.S

Is there a way to remove the changes to the URL Bar, specifically the status information and the target URL?

To begin, I utterly despise the changes to the URL Bar and the removal of the Status bar. In order to stay with the latest version of Firefox I am attempting to recreate the look and feel as best I can.
I have already installed the Status-4-Evar extension. The only thing that remains is to remove the status information and the target URL from the bar.
Are there any settings in about:config that will allow me to make these changes?
EDIT: Status information can be removed by toggling. status4evar.statusInUrlBar. Still looking for a way to remove the target URL...

This code in [http://kb.mozillazine.org/UserChrome.css userChrome.css] below the @namespace line seems to remove the links that appear on hover.
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
.urlbar-textbox-container {color: inherit !important;}
.urlbar-textbox-container-children {opacity: 1 !important;}
.urlbar-over-link-box {opacity: 0 !important;}
</nowiki></pre>
See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

How to get the changed data of an order?

Hi,
I'm trying to use BADI ORDER_SAVE to check if the user has changed the status and based on some conditions, I want to avoid saving the order. My problem is that with function moule CRM_READ_ORDER I can only read the "old" (current) information from database, but not the changes in the screen that the user is going to save ...
How can I get this data?

Hi,
You can get the current document data with FM:CRM_ORDER_READ on BAdI:ORDER_SAVE. This FM reads not only DB data but also current data.
FM:CRM_ORDER_READ reads the document data as follow order.
1.Buffer data
2.DB dta
You can see it on LCRM_ORDERADM_H_DBF03(form orderadm_h_read_with_guid) called by CRM_ORDER_READ.
If you try to create the order and see the data via CRM_ORDER_READ before saving the order, you can see the data,aren't you? It's the evidence CRM_ORDER_READ reads new buffer data not only DB data.
Regards,
Masayuki

Track the changes to the batch jobs in the PRD system.

Hello Basis Guru's,
Need your help in a Query. --> Is there any best practice that can be implemented to trace all the changes done to batch jobs in the past 3 months and going forward. Be it in its scheduling or its variant changes etc, i would like to track the changes to the batch jobs in the PRD system.
Any pointers would be really helpful.
Thanks in advance.
Rgds,
Sri

Hello Raghu,
Third party tools can only help you but not SAP. . A lot of us may think that for example if a Job 'X' runs daily then SAP considers this job as a single object.However actually SAP will treat each run of a job seperately infact as seperate jobs. If you would have noticed each job in SAP has a job id which is unique. So actually each run is unique. Now change logs can exist for only those objects that get changed. But change logs can not exist for objects that are newly created everytime !!
If you would have noticed you can two jobs with the name A but running two different reports/variants whatver. This is because job name is not that important it is the job id.
Every time a job runs a new entry gets stored in TBTCO,TBTCP etc.. tables. It is not that the existing entires are updated.However yes when a job is scheduled periodically there is some kind of a link that is created in the job series but it does not showo up in any of the tables!!
As far as 3rd party tool is concerned I can name a tool like UC4. UC4 has its own database in which the job name will always be unique. For that you can easily find change logs. I think Chronicle (Redwood Scheduler) also supports this.
Regards.
Ruchit.

An error occurred applying the changes to the Distributor?

I'm trying to create a new Oracle publisher but I always get the following error. I already dropped the old publisher using exec
sp_dropdistpublisher @publisher='old'. (However, the dropping get errors now (http://social.msdn.microsoft.com/Forums/en-US/home?forum=sqlreplication)).
TITLE: Distributor Properties
An error occurred applying the changes to the Distributor.
ADDITIONAL INFORMATION:
SQL Server could not enable 'newpub' as a Publisher. (Microsoft.SqlServer.ConnectionInfo)
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The Oracle server [newpub] is already defined as the Publisher [old] on the Distributor [MyServer].[distribution]. Drop the Publisher or drop the public synonym [MSSQLSERVERDISTRIBUTOR]. Changed database context to 'master'. (Microsoft SQL Server, Error: 21646)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=10.00.4000&EvtSrc=MSSQLServer&EvtID=21646&LinkId=20476

Hi,
As the error message, I would suggest you manually clean up Oracle replication objects created by replication:
1.Connect to the Oracle publisher with DBA permissions.
2.Issue the SQL command DROP PUBLIC SYNONYM MSSQLSERVERDISTRIBUTOR;.
3.Issue the SQL command DROP USER <replication_administrative_user_schema> CASCADE;.
More information, see “The Oracle Publisher Is Associated with Another Distributor” section in the
Troubleshooting Oracle Publishers
Thanks.
Tracy Cai
TechNet Community Support

The bookmark tab went from the right side to the left side. I did not change that. what cause the change from the right side to the left side?

The bookmark tab went from the right side to the left side. I did not change that. what cause the change from the right side to the left side? Also the the Mozilla Firefox tab on the upper left hand corner changed.
Its was a red colored tab and now its blue in color. I did not change any thing!

Hey jimmiet,
There were some recent ui changes around the downloads manager. What version where you on before? Anyway, you can customize things in Firefox really easily. Take a look at [[Customize Firefox controls, buttons and toolbars|this article on customizing Firefox]] for details. Should be a piece of cake to move the bookmarks button.
As for the color of the button, you might be in [[Private Browsing - Browse the web without saving information about the sites you visit|Private Browsing]] mode. That changes the color of the button from orange to a purplish color.
Matt

User Exit in the change mode of Sales Order

Dear Guru's
In my requirement I want to stop the user from editing the status of Delivery block and Billing Block into the change view of Sales Order.
I have 2 users for them whenever they may see the change mode of sales order they should see Delivery and Billing Block in gray
that they should not be able to remove the block or change the block.
But I have two other users also who can release and change the Blocks.
Therefore I think mine is the User Exit case but I dont know which is the User Exit I have to give to the ABAPer
Please suggest me the User Exit, Thanks in advance for answer and Suggestions.
regards,
Vojas

Dear Vojas,
As per me User exit will be used, as there are check about the users in your requirement. Please try with in MV45AFZZ, there are seceral user exit, I guess in USEREXIT_READ_DOCUMENT may be used, ask your abaper to put a check on the current user and if the user which is not in your list of authorized one then change the Blocks in Display mode, or uneditable mode.
Thanks,
Raja

Does Universal Connector read only the changes or the whole of the database everytime

Does the Universal Connector read only the changes in the external database into the Connector View every scheduled cycle or does it read the whole of the database into the connector view every time ?
I need to write a indirect connector for Lotus Notes database using the universal connector and univeral text parse.So I want to know if the Import and Dump scripts that I will have to write will have to read just the changes that took place or the whole of the Notes DB everytime ?
-Aparna

If it is possible to get just the changes then do that.

What is the command to check the changes in the spanning-tree topology?

What is the command to check the changes in the spanning-tree topology?

Hi,
Few commands which would help are:
1- Show spanning-tree detail
2-show spanning-tree detail | in ieee|from|occur|is exec >> This will give from were the changes occuring- Ex:
C6K1#show spanning-tree detail | in ieee|from|occur|is exec
VLAN0001 is executing the rstp compatible Spanning Tree protocol
Number of topology changes 9536 last change occurred 00:00:29 ago
from GigabitEthernet4/6
3- show spanning-tree active *& show spanning-tree root >> Will give you the root information.
4- show spanning-tree inconsistentports >> If there are any port which are inconsistent state due to STP features.
STP running MST:
===============
show spanning-tree mst configuration >> Need to check and match the same outputs with the other switches running in the same MST domain/region.
show spanning-tree mst detail
show spanning-tree mst <name of the region>
Debug on STP:
============
debug spanning-tree events/bpdu >> would be good but to be run with more cautious.
HTH
Inayath
*Plz rate if this info is usefull.

How refresh the changes in the document templates?

Hello all,
I have a doubt. Within our Solman, in a project template, we have created a template documents about standards. Now we have made changes to these templates. My doubt about this is whether there are any way to refresh the documents and facts from these templates. Can we force this 'update'?
Thanks in advance!

Hi Laia,
Let´s assume you are talking about MSWord documents.
When you create a new MSWord document it takes into consideration the Normal.dot file that is located on your PC to bring you with all formatting you previously set in this MS template file ( paragraph styles, fonts, colors, headers, footers, images, etc ).
When you sabe this new document, it starts "its own life". that is, if you move the file from your PC to another PC, it will not have the modifications you make on your local Normal.dot into consideration.
On the other hand, if you maintain the file on your PC and change the Normal.dot, depending on the change, than you will be able to see the change in the created document based on this template.
When you create a new document ( no matter if from template on solman or from scratch on your PC ) and upload it into solman, then you are working like in the case you move your file to other PC ( the connection to the template is broken ).
Other thing to take into consideration is that the Normal.dot is seen by MSword as a real template, while the document created from a template on solman is just a copy of an existing document, saved as a new file in another location.
Regards,
Val

Apply the change to the table

I want to set up a stream to capture, propagate and apply the changes on the table TB in DB1 to the table TB in DB2. Both tables are the same name and structure.
If the value on column1 of DB1.TB is y, issuing the UPDATE statement
update DB1.TB set column1 = x
will replace y with x.
However, at destination DB2.TB, column1 has the value
z = sum(column1) of DB1.TB,
the chnage at source table (x-y) will need to be added onto the column at DB2.TB, making it z+(x-y).
Any idea on how to use the rule or handler to realize this transformation?
My understanding is that we shouldn't query the DB2.TB in the rule / handler function. Correct me if I am wrong.
Thanks for any help.
Eugene

Hi Eugene,
I haven't seen a requirement/best practice that you shouldn't query the target table in the dml-handler. And in the contrary of table-triggers there's no 'mutating table problem' in here, because of the source of the event. I can't see any functional problems in querying the target table. You should even be able to query the source database over a database link. If any streams-guru has an other meaning I'm interested in hearing it. The only thing you should bother about is the performance in this. Since the dml-handler is a peace of code executed by the apply process it slows down the applying of the event. If you implement 'heavy' functionality by doing all kinds of queries then it's like driving with your foot on the brake. If your source table is suffering from lot's of mutations then your capture process might not be able to post its events to the apply process, causing spilling of events.
In that case it's better to let your apply process enqueue its events on a seperate queue (there is an method for in I thought the dbms_apply_adm package or the dbms_streams_adm to add a seperate queue to the apply process). Then the LCR changes into a Custom-enqueued-event that can be dequeued from a custom-process. Then you can create a seperate dequeue-process that you can schedule with in dbms_job/dbms_schedule that does the applying of the changes.
Regards,
Martien

[svn] 3839: Update the channel url to reflect the change in the runtime channel

Revision: 3839
Author: [email protected]
Date: 2008-10-23 07:42:37 -0700 (Thu, 23 Oct 2008)
Log Message:
Update the channel url to reflect the change in the runtime channel
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-manual/ajax/messaging/TextMessageRuntimeDest.html

Many ways to do this. The easiest is to have a method in one of your classes that reads the data from the database and creates all the proper structure under a RootNode and then returns that RootNode.
Whenever you want to refresh the tree, just call that method to recreate the root node (and all the underlying structure/nodes) and then re-set the root node of your tree model using the setRoot() method. That will cause it to refresh the display given the new root node.
Once you have that working, you can get fancier and make it more efficient (only updating/firing events for the nodes that actually changed, etc).

Program RCCLTRAN is locking the changes of the Production Orders

Similar Messages

Maybe you are looking for