Program related ENHANCEMENT-POINT/SECTION with the name LMEPOF8D_02 exists

Hello
In an upgrade, after finishing with the SPAU task we got the following error in the standard object LMEPOF8D:
A program related ENHANCEMENT-POINT/SECTION with the name "LMEPOF8D_02" already exists.
Anyone knows which cause could be generate this kind of error?
Thanks in advance for your help
Best Regards,
Leonardo

Hello Sandra,
We have finished with SPAU. Regarding LMEPOF8D include, we kept with the ECC6 standard code. Therefore, from a point of view of code, it should be ok. However, we have this sintax error.
As you said, the include contains the enhancement point LMEPOF8D_02 which generates the sintax error, but we couldn't find if this enhancement is used in another place.
We also found note 1331844 and tried to fix the issue by using the 2nd solution propose in the note. But, it didn't work neither.
Do you have any idea about what cause could generates this error?
Thanks in advance for your support.
Best Regards,
Leonardo

Similar Messages

Problem with copying to external drives 10.8.3 "the operation can't be completed because an item with the name .ds_store exists"

After upgrading from 10.7.5 to 10.8.3 I cannot copy certain folders to any external drive. the operation can't be completed because an item with the name .ds_store exists. I have seen this problem in discussions for many years with no real solution. Does anyone have a resolution? Please help. This is very frustrating as I work in two locations and copy folders back in forth all the time.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

SharePoint 2007 Content deployment Error: 'A folder with the name already exists.

Hi, In SharePoint 2007 one Content deployment job is failed with below error:
Content deployment job 'Remote import job for job with sourceID = some id' failed.The exception thrown was 'Microsoft.SharePoint.SPException' : 'A folder with the name PublishingImages/AEI-2014/Blue already exists.'
From last 3 days I am getting this error and previously this Job was running without any Error.
In Import Log file getting message: "FatalError: A folder with the name PublishingImages/sg-2015/yellow already exists."
Please tell me how to resolve the issue.

Hello,
It seems same folder exist in destination server that's why job is failing. You need to check destination server and remove the same name/GUID from site then try again.
See this technet for more info: (see "Conflicting content on source and destination" section)
http://technet.microsoft.com/en-us/library/dd795107%28v=office.12%29.aspx
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Netca: "a listener with the name already exists" after bombing out

Installing a listener via netca on a CentOS 5 x64 11g RAC setup.
I had a typo in the $ORACLE_HOME shell variable in .bash_profile for the oracle user. This caused netca to bomb out with a series of 'file not found' and 'directory not found' errors. netca did not complete.
netca did, however, create listener LISTENER on port 1521 on both my nodes. There is no listener.ora file anywhere, due to the bad $ORACLE_HOME directory.
I'd like to delete this and start over so that netca completes normally.
I cannot use netca to delete listener LISTENER. The delete option is greyed out. I did reboot, and tried killing the tsnlsnr process.
crs_stat -p shows the following:
NAME=ora.rac1.LISTENER_RAC1.lsnr
TYPE=application
ACTION_SCRIPT=/u01/app/oracle/product/11.1.0/db_1/bin/racgwrap
ACTIVE_PLACEMENT=0
AUTO_START=1
CHECK_INTERVAL=600
DESCRIPTION=CRS application for listener on node
FAILOVER_DELAY=0
FAILURE_INTERVAL=0
FAILURE_THRESHOLD=0
HOSTING_MEMBERS=rac1
OPTIONAL_RESOURCES=
PLACEMENT=restricted
REQUIRED_RESOURCES=ora.rac1.vip
RESTART_ATTEMPTS=5
SCRIPT_TIMEOUT=600
START_TIMEOUT=600
STOP_TIMEOUT=600
UPTIME_THRESHOLD=7d
USR_ORA_ALERT_NAME=
USR_ORA_CHECK_TIMEOUT=0
USR_ORA_CONNECT_STR=/ as sysdba
USR_ORA_DEBUG=0
USR_ORA_DISCONNECT=false
USR_ORA_FLAGS=
USR_ORA_IF=
USR_ORA_INST_NOT_SHUTDOWN=
USR_ORA_LANG=
USR_ORA_NETMASK=
USR_ORA_OPEN_MODE=
USR_ORA_OPI=false
USR_ORA_PFILE=
USR_ORA_PRECONNECT=none
USR_ORA_SRV=
USR_ORA_START_TIMEOUT=0
USR_ORA_STOP_MODE=immediate
USR_ORA_STOP_TIMEOUT=0
USR_ORA_VIP=
My question...how do I delete this listener (and the one on rac2) so that I can re-install them correctly using netca?
Edited by: user611309 on Apr 21, 2009 12:12 PM

Hi,
the listener is still registered with Oracle Clusterware. This registration will stay regardless of the existence of listener.ora and related files. Thus, you need to get rid of the registration, if you want to do it from scratch (which may not be required, if the listener starts and stops correctly). However, from your Clusterware home, please, issue:
srvctl remove listener -h
Usage: srvctl remove listener -n <node_name> [-l <listener_name>]
-n <node> Node name
-l Display listener configuration
-h Print usage
Hope that helps. Thanks,
Markus

Create an object with the name passed in as a string argument to a method

Hi,
I am sorry if it's too trivial for this forum , but I am stuck with the following requirements.
I have a method
void abc(String object_name, String key, String value)
method abc should first check if there exists in memory a hashmap object with the name passed in as argument object_name.
If yes ..just put the key and value there.
if not , then create the hashmap object called <object_name> and insert the key/value there.
Can anybody help me in the first step i.e, how to check if an object exists with the name passed in and if not then create it.
Will getInstance method be of any help?
Thanks in advance for your response.
-Sub-java

Dear Cotton.m,
Thanks for your suggesstion. I will remember that.
But somehow I have a strong belief that you still need to consult dictionary for exact meaning of the words like "upset" , "frustration" etc. Not knowing something in a language , that too as a beginner, does not yield frustration, but increases curiosity. And people like petes1234 are there to diminish that appetite.
To clarify above, let me compare jverd's reply to my doubt with petes1234's.
jverd said it cannot be done and suggested a work around (It was perfect and worked for me) While petes1234 , having no work in hand probably, started analysis of newbies mistakes.
jverd solved my problem by saying that it cannot be done. petes1234 acted as a worthless critic in my opinion and now joined cotton.m.
Finally, this is a java forum and I do not want to discuss human characteristics here for sure.
My apologies if I had a wrong concept or if I chose a wrong forum to ask, where people like petes1234 or Cotton.m show their geekdom by pointing out "shortfalls" rather than clearing that by perfect examples and words.
Again take it easy and Cotton.m , please do not use this forum to figure out others' frustration but be a little more focussed on solving others "Java related" problems :)
-Sub-java

Create Enhancement Point / Section ?

Hi,
I want to create a new enhancement point / section in a standard SAP code, how to create it. I need to create it in the code "SAPLMIGO".
regards,
Navneeth K.

Hello Navneeth,
Please be aware that this Enhancement Framework is available from netweaver2004s as i understood,or if the SAP Basis version is greater than 700
Create a composite enhancement spot
1.Select the package in which you want to create the enhancement spot.
2.Open the context menu and choose Create ® Enhancement ® Composite
Enhancement Spot.A dialog appears.
3.Specify a name and a short description.
Optionally, you can assign the new spot to an already existing composite enhancement spot.
4.Choose Activate to activate the new spot.
Create a subordinate composite enhancement spot
1. Open the desired package.
2. Select the composite enhancement spot to which your new subordinate composite spot will belong.
3.Open the context menu and choose Create ® Subordinate Composite Enhancement Point.
A dialog appears.
4.Specify a name and a short description.
5.Choose Activate to activate the new subordinate spot.
Result:
● The selected composite enhancement spot and its newly created subordinate one are displayed in the object list in a list form (not as a tree) on the same level.
● Choose the composite enhancement spot and select the Spot Composites tab to check whether the new subordinate composite is properly attached.
● The header of the new subordinate spot has to contain the name of the composite enhancement spot to which this subordinate is attached.
● Use a forward navigation to Navigate from parent to child and back.
Create a simple enhancement spot
1. Select the package in which you want to create the simple enhancement spot.
2.Open the context menu and choose Create ® Enhancement ® Enhancement Spot.
A dialog appears.
3.Specify a name and a short description.
Optionally, you can assign the new spot to an already existing composite enhancement spot.
4.Select the desired technology from the Technology list.
Currently it is only possible to create enhancement spots of type BAdI.
Source code plug-ins can only be created inside the editor, because they contain points and sections.
5.Choose Activate to activate the new simple enhancement spot.
Edit an enhancement spot
1.Select the package and expand it.
2.Expand the Enhancements node.
3.Expand the Enhancement Spot node.
4.Select the desired enhancement spot.
5.Choose Change from the context menu.
Choose Display if you only want to display the enhancement spot.
Delete an enhancement spot 1.Select the package and expand it.
2.Expand the Enhancements node.
3.Expand the Enhancement Spot node.
4.Select the desired enhancement spot.
5.Choose Delete from the context menu.
Additional informations:
Blog link on enhancement framework
/people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners Part1
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement Part2
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series Part3
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework Part4
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework Part5
Pls check out the document for another set of notes on enhancements
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc
Hope it was of some help
Reward if useful
Regards
Byju

The operation could not be completed because an item with the name xyz already exists

I am trying to make a click and drag backup on an external FAT 32 drive to compliment my Time Machine backup (long story) and I've done this each time by dragging my critical folders into the drive. I get a message asking me to stop, replace or skip, and whether to apply to all items. i click replace, apply all, and let it go.
however, one stubborn folder refuses to comply. every single time I click and drag a group of folder that includes that one, I get a message saying "the operation could not be completed because an item with the name xyz already exists" even after I selected the the "apply all" prompt. at which point, the Mac stops transferring ALL the other files.
I figured, OK, i'll just transfer the other folders individually and then deal with this folder later. so I do that, and once I get to the offending folder, I try to transfer just that one folder into the drive. no good; I get the operation message again. I decide to just transfer the contents of the folder, rather than the folder itself. No good, I just get the operation message about one of the folders within the main folder.
anyone know the cause, or at least a fix?

If you've installed a system modification called "TotalFinder," remove it according to the developer's instructions after backing up all data. Log out, log back in, and try again.
Otherwise, open the Info dialog on both the source and the destination volumes. What is the Format of each? For example, it might be "Mac OS Extended (Journaled)".
For some other possible solutions, see:
operation can't be completed because an...: Apple Support Communities

Automatically create Sub site With the Name of List Item from the list of parent site ,

Hi all
I am using Share Point 2010 And
I have one task That is create new sub site automatically with the name of list item which I Am added in main site List
for Example: I have a list name "Projects" in my main site I am going to add new project as a item ,with that project name i want a new sub site will create automatically .Is there any work flow or any setup
or any feature please help me by giving guidance
Thanking You,
Arun Darly.

you can use ECMA script.
For adding a list item.
http://adicodes.com/add-update-and-delete-list-items-using-ecmascript/
Once the item has been added, on success function create a sub site
http://withinsharepoint.com/archives/285
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)

I am attempting to use the Integration Services Import Project Wizard within Microsoft Visual Studio and am getting this error
Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)
upon Import.
Can anyone shed some light for me on this cryptique error message?
Thanks for your review and am hopeful for a reply.

If you have the SSIS and SSDT (BIDS) installed then
I believe the DTS assemblies got derigistered, a typical outcome of corrupted software, so a full re-install would be the best option. VS +SQL Server + more
Otherwise, as a quick fix try to
reference the SSIS assemblies, like Microsoft.SQLServer.ManagedDTS.dll + more.
They are by default in C:\Program Files\Microsoft SQL Server\<number>\SDK\Assemblies.
Arthur
MyBlog
Twitter

I want to see a number with the name when one of my contacts calling me.., i just see his name...i am from egypt there is a problem with a country

i want to see a number with the name when one of my contacts calling me.., i just see his name...i am from egypt there is a problem with a country

If someone who is listed in your contacts calls you, you will only see their name. This has nothing to do with the fact you're in Egypt. The only workaround I can see for this is to put the person's number in the name section of the contacts. In other words, put their first and last name in the first name section and their phone number in the last name section.

I need to create an action or script to save the file with the name of the selected layer

I need to create an action or script to save the file with the name of the selected layer (not including the hidden layers, but including those visible).
How could modify the script: 'Layer Comps To Files.jsx' to get the result?
Warning: I do not need to export all layers as files.
Who can help me?
THX in advance

Versione in Italiano (Further down the English version)
NB - Nella versione inglese ho messo tutte le immagini dei menu in italiano.
Versione per Mac, ma credo sia identico per Windows.
Spiego passo passo cosa ho fatto:
- Ho creato un file esempio con tre Livelli, salvato sulla scrivania e ho chiuso il file.
- Ho aperto il file e selezionato il Livello al centro per iniziare a registrare una azione che ho chiamato: Save with Name of Selected Layer
- Nuova azione
- Dare il nome e premere Registra
Ora salva…
- Menu --> Livello --> Nuovo --> Livello... e premi -ok-, (lascia il nome che viene mostrato)
- Ancora una volta Menu --> Livello... --> Nuovo --> Livello... e premi -ok-, (lascia il nome che viene mostrato)
- Menu --> Livello --> Ordina --> Dietro
- Menu --> Livello --> Unisci sotto
- Menu --> Livello --> Unisci visibili
- Menu --> Livello --> Nuovo --> Livello... e premi -ok-, (lascia il nome che viene mostrato)
- Menu --> Livello - Nascondi Livello
- Menu --> Elimina --> Elimina livelli nascosti (press -Yes-)
- Menu --> Livello --> Nuovo --> Livello... Inserisci questo: 'Move this to the trash' e premi ok
- Menu --> File --> Script --> Esporta Livelli in File... (Nella finestra che si apre scegliere l’opzione che si desidera, ma togliere il prefisso del nome) e premere -Esegui-
- Selezionare il pannello Storia cliccare su Elimina premendo -Si- ogni volta che si apre la finestra di dialogo (Ripetere 8 volte questa operazione sino ad arrivare nella storia alla condizione di partenza. Ho visto che è meglio di Ripristina -F12-)
- Fermare la registrazione.
A questo punto, mandando in esecuzione questa Azione, ho raggiunto parzialmente l’obiettivo perché i file così creati mantengono, purtroppo, dei prefissi numerici per evitare probabilmente la sovrascrizione di file (credo senza avviso) nel posto dove vengono creati.
Per ottenere l’obiettivo occorre un nuovo passo ed a proposito di questo riferisco quanto segue:
ATTENZIONE - L’operazione descritta qui di seguito deve essere fatta su di una copia del file, per cui:
- Duplicare il file,
- Spostare l’originale in altra cartella
- Lavorare sul file duplicato.
mi riferisco a questo...
ATTENZIONE - Questa modifica è effettuata a proprio rischio e pericolo ed il sottoscritto non si assume alcuna responsabilità su quanto venga fatto soprattutto da mani inesperte.
ATTENZIONE - Questa modifica sovrascrive qualsiasi file che abbia nome uguale al layer che viene selezionato più l’estensione del file naturalmente.
Comunque la modifica è banalissima e a portata di chiunque.
Procedere così:
- Chiudere Photoshop
- Aprire (nel percorso specificato dall’immagine) il file “Export Layers to Files.jsx” (Export Layers To Files.jsx 1.0.0.16) con un editor di testo puro.
- cercare la stringa (dovrebbe essere in riga 1029)
var fileNameBody = fileNamePrefix;
fileNameBody += "_" + zeroSuppress(i, 4);
fileNameBody += "_" + layerName;
- sostituirla con:
var fileNameBody = fileNamePrefix;
fileNameBody += layerName;
- cercare la stringa (dovrebbe essere in riga 1047-46)
var fileNameBody = fileNamePrefix;
fileNameBody += "_" + zeroSuppress(i, 4) + "s";
- sostituirla con:
var fileNameBody = fileNamePrefix;
fileNameBody += "";
- salvare e uscire.
- riavviare Photoshop
- provare l’azione registrata facendo attenzione che il nome del layer non sia identico al nome di un file già presente altrimenti questo verrà sovrascritto.
Domanda:
Perché ho creato livelli che poi ho eliminato ecc.
Risposta:
Semplice per evitare errori di esecuzione delle azioni nel caso di operazioni con livelli mancanti o altro.
Semplice... no?
English version
Mac version, but I think it's the same for Windows.
First of all, I'm translating the actions that I made using the Italian version of Photoshop, you look at the position of the menu that I have chosen to do the work with other languages.
I explain step by step what I did:
- I created a sample file with three layers, saved to the desktop and I closed the file.
- I opened the file and select the layer at the center to start recording an action that I called: Save with Name of the Selected Layer
- New action
- Give the name and press Save ( I think it is so in English )
Now save ...
- Menu -> Layer - > New —> Layer… and press -ok- , (leave the name that is shown)
- Once again Menu -> Layer - > New —> Layer… and press -ok- , (leave the name that is shown)
- Menu -> Layer - > Arrange (order) -> Behind
- Menu -> Layer - > Merge Down
- Menu -> Layer - > Merge Visible
- Menu -> Layer - > New —> Layer… and press -ok- , (leave the name that is shown)
- Menu -> Layer - Hide Layer
- Menu - > Delete - > Delete hidden layers (press -Yes- )
- Menu -> Layer - > New —> Layer… Enter this: ' Move this to the trash ' and press ok
- Menu -> File - > Scripts -> Export Layers To Files... (In the window that opens select the option you want, but take away the name prefix) and press - Run -
- Select the History panel and click Delete (on menu opened) pressing -Yes- every time when open the dialog box (8 times Repeat this step until you get into the story to the starting condition. Not use Restore -F12-).
- Stop recording.
At this point, by executing this action, I have reached the goal partly because the files created in this way remain, unfortunately, the numerical prefixes to avoid possibly overwriting of files (I think without notice) in the place where they are created.
To achieve the goal we need a new step and thinking about this as follows:
WARNING - The operation described below should be made on a copy of the file, so :
- Duplicate the file
- Move the original folder to another
- Work on the duplicate file.
WARNING - This modification is performed at your own risk and the undersigned assumes no responsibility on what is done mostly by inexperienced hands.
WARNING - This change will overwrite any files with the same name as the selected layer plus the file extension of course.
However, the change is trivial and within reach of anyone.
Proceed as follows:
- Close Photoshop
- Open (in the specified path from the image ) file " Export Layers to Files.jsx " (Export Layers To Files.jsx 1.0.0.16) with a pure text editor.
- Search for the string (should be in line 1029 )
var = fileNameBody fileNamePrefix ;
fileNameBody = + "_" + zeroSuppress (i, 4 ) ;
fileNameBody + = "_ " + layerName ;
- Replace it with :
var = fileNameBody fileNamePrefix ;
fileNameBody + = layerName ;
- Search for the string (should be in line 1047-46 )
var = fileNameBody fileNamePrefix ;
fileNameBody + = "_ " + zeroSuppress (i, 4) + "s" ;
- Replace it with :
var = fileNameBody fileNamePrefix ;
fileNameBody + = "";
- Save and exit.
- Restart Photoshop
- Try the recorded Action, making sure that the layer name is not identical to the name of an existing file otherwise it will be overwritten.
Question:
Why I created levels which I then deleted etc..
Answer:
Simple to avoid errors of execution of the actions in the case of transactions with missing levels and other.
Simple ... is not it?
Sorry for my bad English...
Thanks in advance for any hint.
--->>> Please think about this... Adobe <<<---

Does Web Dynpro support adding Enhancement Points/Sections

Hi,
Can someone answer whether the ABAP Web Dynpro framework is supposed to support add enhancement points/sections to code within a component method?
Cheers
Michael Arter

hi,
check out this link :
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/c21ba177be3376e10000000a421937/frameset.htm
also check out the foll post:
Pre-Exits and Post-Exits for WDA
hope this will surely help you!!!
Thanks & regards,
Punit Raval.
Edited by: punit raval on Jul 9, 2009 10:53 AM

How do I search for a song with the name I typed on my iPhone?

I run into this a lot and it is extremely frustrating. I want to find a song like "Menuetti", but the search results end up with hundreds of variations of "Menuetto". Even though I know Menuetti is there somewhere, I can't find the song I am looking for because there is so much garbage returned. Is there any way to get the iTunes store to return the few songs with the name I asked for rather than the hundreds with the name I did not?

You can choose what it searches and where

Cannot backup my files / copy my files and folders due to error message " The operation can't be completed because an item with the name ".DS_Store" already exists. "

Hi Apple community!
I have a [rather worrying] problem.
When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
" The operation can’t be completed because an item with the name “.DS_Store” already exists. "
I am not given an option to skip this file or anything else.
But I simply cannot complete the operation!
I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
but no success.
The same thing keeps happening.
At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
So effectively, it seems I cannot backup my files anywhere!
Any help or advice would be greatly appreciated.
Thank you.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Error message "The operation can't be completed because an item with the name .DS_Store already exists"

Major headaches with copying files and folders between drives. I constantly (and I mean constantly) have to resort to copying files across in small batches (fewer than 10 works best) because anytime I try to copy lots of files and folders from my mac to an external hard drive (or from one external HD to a second external HD), I ALWAYS get the error message "The operation can't be completed because an item with the name .DS_Store already exists".
The files and folders are all Mac-generated, so hint or trace of foreign OSs in the mix.
All file types are susceptible
the HDs are all Mac OS X formatted, no foreign file formats involved
the HDs are all journal-enabled, OS X extended formats
have looked on here for previous posts, past suggestion was to disable creation of DS_Store files - not really a solution and realistically, defeats the purpose of their creation
any ideas anyone?
would appreciate any thoughts or sugestions, this has got me beat
the context is that I have a lot of image files that I am copying (trying to...) new external 3TB drives for backup and the job appears endless if I have to do this in batches of 10 or so..!
many thanks for any suggestions

This is definitively a nuisance. When copying large amounts of files between volumes try opening a terminal window and use use ditto. You need to type the directory paths of the source and the destination volume. When it starts ditto just coupes and optionally overwrites anything on the destination. You can get a verbose mode where it lists all activities.
gunnars-mac-mini-i7:Volumes gunnar$ man ditto
NAME
     ditto -- copy directory hierarchies, create and extract archives
SYNOPSIS
     ditto [-v] [-V] [-X] [<options>] src ... dst_directory
     ditto [-v] [-V] [<options>] src_file dst_file
     ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
     ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ... dst_directory
     ditto -h | --help

Program related ENHANCEMENT-POINT/SECTION with the name LMEPOF8D_02 exists

Similar Messages

Maybe you are looking for