Program RFFOAVIS_FPAYM: No records selected (F0073)

hi everyone
im having a nasty issue when trying to output payment advices
no matter what usual way i try, i get the following message:
F0073
Program RFFOAVIS_FPAYM: No records selected
im using RFFOAVIS_FPAYM as print program, which is standard - nothing has been changed in it
and tried outputing the paymend advices through F110 aswell as RFFOAVIS_FPAYM directly
both results in the same message
after a while of searching i found note 503945
unfortunately it applies to release 4.6C while we are using ecc6
neitherless i found REGUH-XAVIS interesting, as in our case they also seemed to be all space.
so i tried setting the CHECK REGUH-XAVIS... in the report to 'X' which gave me an output in some cases,
in others still the same message. and in the cases where it worked, some forms came out with lots of 'XXXXXX' where other values where supposed - probably because those wherent intended to be output in the first place?
we have also doublechecked the customizing with a different system, where it works
and couldnt find any assimilarities
has anyone experienced this issue too? or know anything that might help?
thank you!
PS: it seems to be the same problem with report RFFOAVIS too

F0073
Program RFFOAVIS_FPAYM: No records selected
If I am correct, the issue is when you were executing F110 where system will throw the above error if you have not maintained the payment method.  Check in F110 under "Parameter" tab, whether you have maintained Payment Methods for your company code.
thanks
G. Lakshmipathi

Similar Messages

  • Program ZRFFOM100: No records selected - Automatic payment run

    Hi Guru's,
    I am facing a problem in payment run.
    I am able to do the payment run. Vendor balance is getting reduced. But when it come to print(Cheque, payment advise and payment summary) it is not working.
    In the print parameters all tick is provided. 
    I went to job log found a message like this.
    Job started
    Step 001 started (program SAPFPAYM_SCHEDULE, variant &0000000000096, user ID SATYA)
    Step 002 started (program ZRFFOM100, variant &0000000000017, user ID SATYA)
    Program ZRFFOM100: No records selected
    Job finished
    Please help me to solve this
    Thanks
    Deepak

    hi
    Generally SAPFPAYM  program is used  for wire transfer, if you want cheque details to be displayed in spool you might choose some other standard program name like Rffous_c and assign it to your payment method at country level
    in your case you might have selected  different program name, check it out at country level in T.code FBZP.
    and if you are using it for wire transfer follow these steps
    1create a payment method z i.e. wire transfer for country, select bank transfer instead of cheque and select use payment medium work bench and assign wire transfer form as ACB_ZA in format field
    2.Define payment method in co.code.
    3.configure bank determination for z payment method.
    4.add payment method z in your vendor master record.
    5.posting a invoice and mention z payment method in that.
    6.run the payment programme in T.code F110.
    7.go to T.code SE38 and run the programme called SAPFPAYM by execute button and give identification of your run details and give format as ACB_ZA and click on execute button then pop up window will appear then give all the required fields as one 1 and execute it will give you the out put.

  • Automatic payment printing error:Program RFFOUS_C: No records selected

    Hi,
    I need to excute printing after payment with f110 using program RFFOUS_C.
    I have done the following configurations:
    - Assigned SAPScript in 'payment methods in company code' in Tcode FBZP.
    - Assigned printing program in 'payment method in country
    - Created check lot. Check created successfully.
    - Entered variant in printing program RFFOUS_C in automatic payment F110.
    Automatic payment run successfully. But printing form donnot have data which are check information
    This is job log in SM37:
    =======================================================================
    Job started
    Step 001 started (program SAPFPAYM_SCHEDULE, variant &0000000001950, user ID xxx)
    Step 002 started (program RFFOUS_C, variant &0000000000093, user ID xxx)
    Check number status at beginning of processing: 1002
    Program RFFOUS_C: No records selected
    Job finished
    =======================================================================
    Please give me help.
    Thanks & Best Regards,

    Hi,
    In F110 in the tab, Additional log, tick all that is there and mention your vendor no. range that you have specified in parameters tab and run Proposal again.
    Then go to proposal log to see the exact error reason..It will help..
    Regards,
    SAPFICO

  • Program RFFOUS_C: No records selected

    Hello Experts,
    I'm having issue cannot assign cheque in payment run.
    Currently I'm using outsource bank to issue cheque. When I do payment run, it will send the data through EDI to the respective bank.  In future, I want to have 2 method, outsource and internal cheque payment.
    When I do F110, and I create payment medium for program  RFFOUS_C - variant (check form = Z110_PRENUM_CHCK) , I always get this error.
    Program RFFOUS_C: No records selected
    The following documents were not processed since they will be sent by EDI
    Is it possible to have both ways of payment ? using EDI and also cheque number assignment in SAP ?
    I can do 2 times, 1 time for EDI and next time for the internal cheque number (I maintained my check lot number already).
    Can anyone help me ?
    Thanks,
    Melissa

    Hi Kenghua,
    are you saying that when I fill in the parameter for F110, I should maintain the variant for program RFFOEDI1 instead of RFFOUS_C ?
    Is this means that the data will be send to bank and also update my cheque number assignment ?
    I think this would cause duplication.
    what I meant is .. sometimes I will use F110 to send data to bank, and sometimes I will only use F110 to create payment with my cheque number I maintained in FCHI.
    Just want to clarify are we having the same thoughts ?
    Thanks,
    Melissa

  • Program ZRFFOD__S: No records selected

    Hi
    I run F110 then the documents has been cleared but when i checked spool request I cant see any. I checked it in payment log and find this error "Program ZRFFOD__S: No records selected".
    Is there anyone know why this error has been encountered?
    thanks

    Hi,
    Thank you for your idea almost solve my problem. Until i encounter the other one.
    Element  window SUMMARY is not defined for form F110_EDI_01
    Message no. TD427
    Diagnosis
    A text element was entered which is not defined in the specified form window.
    System Response
    The function was ignored.
    Procedure
    Please specify a text element defined in the form window. You can determine the names of text elements in form windows using the SAPscript form maintenance transaction.
    I checked the form in FBZP and message shows "Form F110_EDI_01 language EN is not available in client 510". I press enter and see that its cliend id is 000, is that really not applicable for client 510.
    Thanks!

  • Program RFZALI120: No records Selected

    Hi,
    This is Jyothi.  I am not able to see the Proposal list after creating the Parameters.  I am getting a message : "Program RFZALI120: No records Selected". I have records in the vendors.
    Can anyone help me with this issue.
    Thank you
    Jyothi

    HI ,
    create teh Parameters & save .
    then run the proposal & save it.
    then you go for view the list.
    chandra

  • RFFOAVIS_FPAYM- no records selected

    Hi,
    Does anyone know why the payment medium program: RFFOAVIS_FPAYM is not picking up any records? My payment run has the payment documents and RFFOAVIS_FPAYM is defined for that payment method in FBZP configuration, I have specified the selected screen variant for RFFOAVIS_FPAYM in F110 too.
    Thanks!

    Hi, im new in this forum, i had this problem and i solution the problem going to the following path.
    After this i check that the following field was selected.
    Thanks.

  • Payment method(s) are not allowed for this program / Program RFFOAVIS_FPAYM

    Dear Friends,
    In Se38  abap editor, I entered the program RFFOM100, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Payment method(s) are not allowed for this program'.
    Payment method S is not used in F110, It was not mentioned in vendor master or vendor invoice.It is not mentioned in fbzp in bank determination. When i tried to delete payment method 'S' the system shows a message Payment Method S is being used in the company code.
    In  the program RFFOAVIS_FPAYM, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error  'Program RFFOAVIS_FPAYM: No records selected'. But there open items or invoices.
    Please suggest how to resolve the errors.
    Regards
    Sridhar

    Hello,
    Why are you directly executing these programs?
    You will not expect these program to execute directly by going to SE38.
    I would have configured the relevant payment methods in the country with DME structure or classical RFFO* programs, which in turn pick up the inherent programs at the time of running F110.
    For example, if you need to generate BACS file for country GB, either you copy the GB_BACS to ZGB_BACS or use GB_BACS directly in FBZP settings.
    Make sure that you have maintained OBPM1 / OBPM2 / OBPM3 and OBPM4 settings properly.
    The system automatically gives the access to system RFFOAVIS_FPAYM. Prepare a variant against this program in F110. Relevant file gets generated to folder path mentioned in OBPM4 will get generated. The file get generated can be seen in AL11.
    Hope this is informative and solves your issue.
    Regards,
    Ravi

  • F110 - Program RFFOAVIS_FPAYM

    Dear Friends,
    Using T.code F110  Payment Program was completed.In printout/datamedium i have selected program RFFOAVIS_FPAYM and variant PCCFR. I checked the payment run log and getting this error messages.
    Step 001 started (program SAPFPAYM_SCHEDULE, variant &0000000000569, user ID DEVELOPER)
    No variants found for format ACH                                                       
    No Payment Media Created in Format 100                                                 
    Step 002 started (program RFFOAVIS_FPAYM, variant &0000000000038, user ID DEVELOPER)   
    Program RFFOAVIS_FPAYM: No records selected                                                                               
    How to overcome this errors? Please advise.
    All the help will be greatly appreciated
    Regards
    Sridhar

    HI Friends,
    Resloved the issue by myself.
    Went to T.code OBPM4-Payment Medium selection variants. select payment media format DTAUSO and double click the format. in the right hand you will find bank ctry,bank key,bank name. select an variant PCCFR and save it. if not create it.
    Go to T.code sa38 and enter select program SAPFPAYM and variant PCCFR.Excute the payment medium creation.
    Finally go to F110 and go to environment-payment medium-dme adminisration. in the dme overview, you will file format with can be downloaded.
    Regards
    Sridhar

  • "No Records Selected" in program RFFOUS_C

    Hi all,
    I had run the Pre DME program, RPCDTCU0 to generate the run date (set_laufd) and run id (set laufi) for a particular pernr. The I run the RFFOUS_C and input the run date into the RFFOUS_C program run date and run id into the RFFOUS_C identification feature.
    Additional Info inputted on the RFFOUS_C Selection Screen:
    Paying Company COde : 3000
    Payment Method: C
    House Bank : 3000
    Account ID: 3000
    Check Lot Number: 2
    Print Checks option : marked
    Printer: NS4P
    Print Payment Summary: marked
    Printer: NS4P
    Number of Sample Printouts: 2
    No. items in payment summary: 9999
    Void and reprint checks from payment run already printed options: marked --> is this the case?
    Check number: 0000000000001 to 9999999999999
    Void Reason code: 4
    Note: This pernr selected payment method is 'C'. So why the RFFOUS_C output the "NO Records Selected??

    Hi,
       What are you trying to do, print a fresh check or void a check that has already been printed
    Regards
    Roger

  • Program RFFOAVIS_FPAYM

    using program RFFOAVIS_FPAYM to creates a bank transfer and a payment advice.
    All works ok if I only have ONE item .
    If I have MORE than one item.. I do NOT get it to print on my payment advice form.  I ONLY get ONE item.
    HOW can I control this?
    How can I get ALL items to print on the payment advice form?'

    Thanks Rob.
    I have checked the vendor master record   field XPORE and this is NOT turned on, so should not be an issue.
    Could you tell me Where in the IMG I should check for settings?
    I have checked everything we could think of through the FBZP transaction and can not see anything that would impact this.

  • RFFOEDI1 - On execution - No records selected

    Hi,
    My requirement is to send payament advice form via email and this is working perfectly. I want to debug the program RFFOEDI1  to extend some logic for email based on sending/paying company codes
    I am doing a vendor invoice in FB60 and in F110 i set all the required info and set the variant.
    But it always says - No records selected when i go thru se38 and excute.
    But it is working if i do directly in F110 - Propsal and payment run - Idoc and email gets trigered. The varints i use in both place is same - Can any one tell how can we acheive this ?
    Senthil

    and, when you debug, which parameter/select-option is the reason you obtain no data?

  • How can i change the record selection criteria via SDK?

    Hi,
    I wanna change the record selection criteria  in rpt file in java program, What API is required?
    Thanks.
    Forest

    Hi,
    You can use RAS API to change record selection formula at runtime. Go to
    https://www.sdn.sap.com/irj/boc/index?rid=/webcontent/uuid/f0aea666-5384-2b10-ffb0-a6facef1d5e5
    and look for Report Application Server Java SDK Feature Samples. It contains the record selection change code.
    Thanks
    Aasavari

  • Opening updated report fails because record selection filter is invalid

    I am trying to update a report stored in BOE XI.  The report has been modified and the main part of the report has been moved to a subreport.   I first replace the .rpt file with the updated report.  Then I attempt to open the report using the code below it, but it throws an error and complains about an unknown field being mentioned in the filter
    oReportAppFactory = (IReportAppFactory) es.getService("", "RASReportService");
    oReportClientDocument = oReportAppFactory.openDocument((IInfoObject) oReport, 0, Locale.ENGLISH);
    ERROR MESSAGE: Cannot open report document. --- This field name is not known.
    Details: errorKind
    Error in File /opt/bobje/bobje/tmp/{F395AC11-26FC-11DF-A70C-00065B8B38B5}.rpt:
    Error in formula  <Record Selection>.
    '// Filter on desired date range
    This field name is not known.
    Details: errorKind
    If I manually delete the record selection filter in CMC before upgrading the report all works fine.  So, do I need to remove the filter before attempting to open the report or is there another step I'm missing to refresh the report using the newly updated .rpt file? 
    thanks,
    Brett

    The relevant part of the stacktrace is below.  
    java.lang.UnsupportedOperationException
            at com.crystaldecisions.sdk.properties.internal.AbstractSDKList.remove(Unknown Source)
            at java.util.AbstractList$Itr.remove(AbstractList.java:436)
            at com.crystaldecisions.sdk.plugin.desktop.common.internal.i.do(Unknown Source)
            at com.crystaldecisions.sdk.plugin.desktop.report.internal.e.f(Unknown Source)
            at com.crystaldecisions.sdk.plugin.desktop.report.internal.e.f(Unknown Source)
            at com.crystaldecisions.sdk.plugin.desktop.report.internal.e.refreshProperties(Unknown Source)
    The context is the same as the original post...
    An existing report is being updated.  The original report uses a single view and has a record selection filter.  The updated report uses the same view in a subreport, and the main report has no record selection filter.
    .rpt file is updated using IReport.replaceUnique(int, File).  
    Changes are committed to IInfoStore -> iStore.commit(IReport)
    Refresh options are enabled
    IReportRefreshOptions refreshOptions = oReport.getReportRefreshOptions();
    refreshOptions.removeOption(IReportRefreshOptions.CeRefreshOption.TITLE);
    refreshOptions.removeOption(IReportRefreshOptions.CeRefreshOption.DESCRIPTION);
    refreshOptions.addOption(IReportRefreshOptions.CeRefreshOption.PROMPT_VALUES);
    refreshOptions.addOption(IReportRefreshOptions.CeRefreshOption.RECORD_SELECTION_FORMULA);
    refreshOptions.addOption(IReportRefreshOptions.CeRefreshOption.GROUP_SELECTION_FORMULA);
    refreshOptions.addOption(IReportRefreshOptions.CeRefreshOption.PRINTER_OPTIONS);
    refreshOptions.addOption(IReportRefreshOptions.CeRefreshOption.DEFAULT_LOGON_INFO_VALUES);
    Properties are then refreshed using IReport.refreshProperties() which throws the UnsupportedOperationException
    changes are again committed.
    thanks,
    Brett

  • Record selected in the table control

    Hi All,
      How do i know the line no of the record selected in the table control.I have declared a table control CONTROLS : t_control1 type tableview using screen 200.But in t_control1-current_line the line no that is stored is always 1.
    Thanks,
    Rakesh.

    in table control property window you have to set that suppose you have set itab-mark as the sel field then it will always be X if you select the field ...
    regards
    shiba dutta

Maybe you are looking for

  • Invoice posting - set document date as baseline date

    Hi Expert! I have issue regardig invoice posting. When invoice posting transactions are done, the baseline date in the transaction is changing due to unknown reasons. The baseline date should not change and should be the document date. This in turn i

  • Problem with some Audio apps

    After installing mountain Lion, some App like tutor for i photo'11 and Learn English audio coarse are not working ?

  • Need to find employees reporting to a manager

    Hi All, I am new to HR module. Basically, i need to develop a report which would list out all the employees reporting to a given manager ID. I am trying to understanding how this org unit, positions and users are tied to each other and what set of ta

  • Error in Java compilation in linux..

    Hello Friends., I am a Newbie.. I have sun Java in Fedora 8.. I am new to Java World too.. My java prog name is parsetrace.java., public class name is also same.. when i type [maran@fedora8 works]$ javac parsetrace.java No error is reported.. but whe

  • CRM Security help needed

    Hi, My PFCG Role Menu data external services are not appearing which is imported from a file created by report CRMD_UI_ROLE_PREPARE in the PFCG transaction. Bussiness role and PFCG role mapping is done. File created by running the report but when I a