Program /SSA/BWT is not including all user names

Hi Friends ,
I'm using /SSA/BWT program to have query analysis , but as I see not all usernames are included into analysis. I wonder why ,and how to achieve an analysis with full user list.
Thansk for your helps
Regards

not solved

Similar Messages

Create batch input, does not include all records

Have anyone experienced, when doing Create Batch Input from the LSMW menu it does not include all rows.
For example I have a .txt file with 3000 records that I specify in "Specify Files"
"Read Data" reads 3000 records.
"Convert Data" Converts 3000 records
"Create Batch input Sessions" creates 2461 records? ?
I have noticed that this happen when the system is busy running many batches and Idocs.

I'm talking about LSMW programs with regular Batch input Recording.
I haven't noticed which transactions it skips since I do not run the Batch, when I notice that it does not include all rows as I have read and converted.
However usually if I "Create the batch input session" once again it includes all the records from the conversion before.
But since Create a batch input can take a long time depending on the amount of transactions it creates this is not a desired option.
So it is not possible that the transactions it does not create are errors since its possible to run them successfully. And I haven't used any SKIP TRANSACTION in the mapping step.
But like I said this only happens when the system is running many batches / idocs at the moment, for example if we are loading the material master at the same time as I run my batch input programs.

Live paint bucket not including all lines

I'm creating a map with different shaded regions and have tried several times but the Live Paint tool is not including all the lines. There is a large area that is showing up as a single region, and all the other lines included in that area that should be designating different smaller regions seem to be ignored. am I doing something wrong? Thanks to all responders.
Leslie

Double Click the Live Paint tool when the dialog shows up check paint strokes which is off by default

HT201272 I need to reload some songs as the backup did not include all. Following this article. Problem is that download icon does not appear anywhere. Using iTunes 11.01. Anybody seen this before?

I need to reload some songs as the backup did not include all. Following this article. Problem is that download icon does not appear anywhere. Using iTunes 11.01. Anybody seen this before?

Steve!
There is a lot more "meat" in this .
I purchased all out of Denmark. My HD crashed and I reload it all. While doing this I had to install new iTunes, - this is the newest version 10.xx. The old version was probbaly 9.xx (cant remember). So the library files are from an old version, - but it does not look like creating a problem. I am now in Sweden, so iTunes was installed in Sweden, and I try to re-download my missing songs while being here in Sweden. However, - I belive I am connected to iTunes store in Denmark. ... (it takes 2 smileys for this, - if you get as far as to here and still have an overview.)

How to retrieve the all user name from system domain(including login user)?

Hi, I am trying to get the system domain all users name. But I unable to get the all user name except domain login user name. I used the below code. What I want to do to get the all user name from system domain. Kindly any one help me.
Properties envVars = new Properties();
Runtime r = Runtime.getRuntime();
String OS = System.getProperty("os.name").toLowerCase();
     if ((OS.indexOf("nt") > -1) || (OS.indexOf("windows 2000") > -1 ) || (OS.indexOf("windows xp") > -1) )
          p = r.exec( "cmd.exe /c set" );
     BufferedReader br = new BufferedReader ( new InputStreamReader( p.getInputStream() ) );
     String line;
     while( (line = br.readLine()) != null )
          int idx = line.indexOf( '=' );
          String key = line.substring( 0, idx );
          String value = line.substring( idx+1 );
          envVars.setProperty( key, value );
     String domainDNSName = envVars.getProperty("USERDNSDOMAIN");
     String userName = envVars.getProperty("USERNAME");
     System.out.println("\n\n\n DOMAIN NAME == "+domainDNSName +" USERNAME == "+userName);
Thanks & Regards
Palani

Thanks kajbj,
I don't know, How many users in domain. I neet to get all the user names from my domain. User like A, B,C,D, E,F. I need to get this users name.
public class Env {
     public static void main(String[] args) {
          System.out.println("USERDOMAIN: " + System.getenv("USERDOMAIN"));
          System.out.println("USERNAME: " + System.getenv("USERNAME"));
Here , I am getting the login user name only. So i needs all user name. How to retrive or get this.
Regards
Palani

ICal pop-up message .. The server did not recognize your user name or passw

I'm having a problem with pop-up boxes when I launch iCal. They indicate the following;
"The server responded with an error. The server did not recognize your user name or password for account “[email protected]” Make sure you enter them correctly."
I recently let my MobileMe account expire as I was not using it that much. As a result, I think this issue is occuring, though I don;t know how to fix it. The same is happening on my iPhone when I attempt to receive eMails from a secondary eMail account.
I would appreciate any help that anyone can provide.
Thank you !! Kenneth

A lot of people have been unable to access Yahoo e-mail on their iPhones or iPads. My wife’s iPad was not downloading Yahoo mail, although her iPhone was. Both used IOS 8.2. We tried deleting the account several times and troubleshooting all of the other settings. The problem appears to have been that allowing the IOS to automatically create the account on the iPad resulted in the wrong settings for the incoming server. The following procedure, pieced together from two websites, fixed the problem for us. So far, so good.
https://portal.smartertools.com/kb/a2659/configure-imap-for-iphone-or-ipad.aspx
https://help.yahoo.com/kb/mobile-mail/imap-server-settings-sln4075.html
On the iPhone, tap Settings.
Tap Mail, Contacts, Calendars.
Tap your Yahoo account, then delete it.
Tap Add Account.
Tap Other.
Tap Add Mail Account.
Complete the Name, Address (email address), Password and Description fields.
Click Next.
Ensure IMAP is selected.
Enter the following incoming mail server information:
Incoming Mail (IMAP) Server - Requires SSL
Server: imap.mail.yahoo.com
Port: 993
Requires SSL: Yes
Hostname is mail.yahoo.com.
Username is your full email address
Password is the same password used to access webmail.
Enter the following outgoing mail server information:
Outgoing Mail (SMTP) Server - Requires SSL
Server: smtp.mail.yahoo.com
Port: 465 or 587
Requires SSL: Yes
Requires authentication: Yes
Username is your full email address
Password is the same password used to access webmail. It may have been entered for you.
Tap Next.
The iPhone will establish an SSL connection to your IMAP and SMTP servers.
That’s all!

Filter table not screening all the name of customers

Hello,
Filter tabel not screening all the name of the customers.During filter of the Open Sales Order report.
Please reply me ASAP
Thanks & Regard's
Amit Tyagi

Hello Amit,
I think this is the same scenario described in Note 1120578. It's an application error fixed in PL 38 (2005B) and PL43 (2005A, SP01).
Regards,
Lorna

After updating to iOS 8 my iPad 2 does not keep my user name and password for isp start page

After updating to iOS 8 my i pad 2 does not store the user name and password for my earthlink start page. In past could go to bookmark and the start
page would automatically come up. Now I must enter the user name and password every time to access the personalized start page. tried to find some settings that needed changing but no luck. is this a problem with iOS 8 Earthlink referred me to apple they could not help any help here

Hello nkrlw,
It may be that AutoFill is disabled in Safari, or that Private Browsing is on.
Go to Settings > Safari > Passwords & AutoFill and make sure that Names and Passwords is on.
Go to your Home screen and open Safari. If Safari is black or dark instead of white or gray, Private Browsing is on. Safari doesn't save account names and passwords when Private Browsing is on. To turn off Private Browsing:
On iPad, tap the the plus icon in the upper-right corner of the Safari page, then tap Private in the lower-left corner.
On iPhone and iPod touch, tap in the lower-right corner of the Safari page, then tap Private in the lower-left corner.
Get help using iCloud Keychain
http://support.apple.com/kb/TS4644
Cheers,
Allen

Error in iCal: The server did not recognize your user name or password for account "Gmail."

To keep my iCal up to date on two computers, I export an Archive in one and import it to the other. Yes, I know I should use the Cloud, but humour me.
Export of iCal from my MacBook Air (OS 10.7.5) no longer works when imported to my desktop (OS 10.6.8). It returns an error saying "The server did not recognize your user name or password for account “Gmail.” Make sure you enter them correctly."
After dismissing this dialogue box twice (it offers no other options, iCal crashes.
I've turned off the option on my MacBook that asks to use my Gmail account, but since I can no longer launch iCal on my desktop, it can't import new data. How can I clean out the brain of iCal on the desktop so that it will open -- blank -- and perhaps accept a new version of my iCal data?
Thanks,
Bruce

iCal
MobileMe
Apple Support

TS3276 I receive a pop up from ICal saying the server does not recognize me user name and password. This started yesterday. I have no problems with receiving or sending emails through Mail

I receive a pop-up from ICal saying the server does not recognize my user name and password for my me.com email address. This started yesterday and occurs about every 5 minutes or so. There are no problems with receiving or sending email through Mail. I did change me email password several days ago but have no problems sending/receiving since then.

I fixed the problem. I opened Preferences in ICal and entered my new password. No more pop-ups

ICal error "server did not recognize your user name"

I recently was added to the MobileMe calendar beta, and now my iCal calendar doesn't sync with MobileMe. iPhone works fine. Error message when I launch iCal says "server did not recognize your user name"
Any thoughts, suggestions would be appreciated.

iCal/Preferences/Accounts/Password

EBS 7.3 "Could not authenticate this user name and password, try again"

I have just install Sun StorEdge Enterprise Backup Software 7.3 on a new Solaris 10 (06/06) system. I have installed the following packages with no errors: SUNWebsc (Client), SUNWebsn (Storage Node), SUNWebss (Server), SUNWebsm (Man pages) and SUNWebsg (Console).
I have executed the �nsraddadmin� command for both root and administrator.
I start the web browser with http://<hostname>:9000 and the java software loads with no errors. But when I try to login for the first time with administrator/administrator, I get the follow error:
ERROR: Could not authenticate this user name and password, try again�

I think the client is not able to do a HTTP POST
to the WLS server but it can do a HTTP GET.
I dont know why.
http://manojc.com
"Ganesh" <[email protected]> wrote in message
news:3eba91bc$[email protected]..
>
Hi,
I deployed a rpc web service using WLS 7.0 SP2 in HP-UX 11 environment.When I
invoke the web service through my browser (IE 6.0) using the web servicesurl,
it brings my service method correctly. From there, if I click the invokebutton
it asks me for a network user name and password under "weblogic" realm???If I
provide the admin user credentials (which I supplied while creating mydomain)
it is not accepting that it keeps popping up this network user passwordwindow
over and over. Not sure which username/password I have to provide here tosee
the result of my service.
If I try to invoke the web service through my client (static) I am gettinga connection
refused exception. I guess either way, I am not able to access my webservice.
In the attached file, I have cut and pasted the client stack trace as wellas
the server log trace from weblogic.
Any ideas would be highly appreciated.
Thanks,
Ganesh

How to know the all user name from system/system login

hi all,
i want to know the all user names from system login who are the existing user like
regards
srinivas

Hello,
Using DBA_USERS will give more details
select * from dba_users;Regards

Please help I am suddenly getting the following on my calendar The server did not recognize your user name or password for account "..." Make sure you enter them correctly. I depend on it for work

Please help I am suddenly getting the following from my calendar The server did not recognize your user name or password for account “...” Make sure you enter them correctly.I have even tried changing the password and no luck. I depend on it syncing with mobile me and my phone and I need it for work.

I have been having the same issue but I think I fixed my problem. In iCal, click iCal, Preferences, Accounts and retype your password. That seems to have done the trick for me as far as I can tell.

I bought a new McBook Pro and when I backed up from my old computer, the iCal on my new computer is not syncing. It says "The server did not recognize your user name or password for (name of my mobile me acct). Make sure you enter them correctly."

I bought a new McBook Pro and when I backed up from my old computer, the iCal on my new computer is not syncing. It says "The server did not recognize your user name or password for (name of my mobile me acct). Make sure you enter them correctly." Any suggestions?

Carla,
Check this post for a possible solution.

Program /SSA/BWT is not including all user names

Similar Messages

Maybe you are looking for