Program start-up and Memory

I have a program that exhibits some interesting behavoir with memory consumption.
When I start my executable jar (without specifying a specific java heap size), the Windows task manager reports that the program is consuming about 20MB of memory. However, when I minimize the program and then bring up the program again (i.e. de-iconizing it), the amount of memory consumed is about 10 MB.
Any ideas on what is possbily going on ?

no =)

Similar Messages

Pavilion g6 laptop with start-up and memory module issue + beeping

My laptop is a g6-1c58dx. I was(?) having problems with my cooling fan, so I went about disassembling it to get into the fan to clean the fan out. So far, so good. I think I'm having some kind of problem putting the memory module back in now though. I'm not positive which side of the memory module was facing up when I took it out and I forgot which of the two slots it was in. However, I've tried with both sides in both slots and still no dice. Every time I hit the power button, the capslock button blinks, the screen doesn't turn on and I get three long beeps followed by two short beeps. I've been trying to find a good picture of the memory module in the laptop some place online to see if I'm doing something wrong, but I haven't been able to find a good enough one. I went digging into part of the support rescources here that mentioned having some video and such which might be related to my problem, but I couldn't find g6, only g1, g2, and g3. So, it's very late here. I've been working on this all night. Could anybody tell me what I need to do to end the maddness?
This question was solved.
View Solution.

Here it is:
https://www.youtube.com/watch?v=_1I0kahnC4I
and
https://www.youtube.com/watch?v=VLXe2LJXpBs
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Premiere has been stalling regularly upon program start-up and closing

We have a strange problem - PP CS4 files will open... but after saving and exit - they will not open again!
May or may not be related but we also have on some files that yellow triangle on the lower right corner, saying "File importer detected an inconsistency in the file structure of [file name]" - does it have anything to do with it? how can it be solved and how can we fix the files? [All files are AVI type 2, filmed in Onlocation]
thank tou for your help!

I don't know why you can't open saved files, but I get that error message myself occasionally. I don't think it's related.

When I start Photoshop the program stop functioning and shuts down, I just upgraded the memory so the computers capacity should be fine.

When I start Photoshop the program stop functioning and shuts down, I just upgraded the memory so the computers capacity should be fine.

Moving the discussion to Photoshop General Discussion.
Thanks,
Atul Saini

I'm getting the following error message when ever I try to start cs6 and the program gets close. "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly."

Hi,
I’m getting the following error message when ever I try to start cs6 and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Please advise what is the problem? and How to sort this out?
OS Name
Microsoft Windows 8.1 Pro
Version
6.3.9600 Build 9600
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
JARVIS
System Manufacturer
Dell Inc.
System Model
Inspiron N5110
System Type
x64-based PC
System SKU
To be filled by O.E.M.
Processor
Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A11, 8/3/2012
SMBIOS Version
2.6
Embedded Controller Version
1.01
BIOS Mode
Legacy
BaseBoard Manufacturer
Dell Inc.
BaseBoard Model
Not Available
BaseBoard Name
Base Board
Platform Role
Mobile
Secure Boot State
Unsupported
PCR7 Configuration
Binding Not Possible
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.3.9600.17196"
User Name
Jarvis\JARVIS\Abhishek
Time Zone
India Standard Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.16 GB
Available Physical Memory
1.21 GB
Total Virtual Memory
3.72 GB
Available Virtual Memory
1.55 GB
Page File Space
576 MB
Page File
C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
Display adapters:
and NVIDIA GeForce GT 525M.

Without the actual crash logs nobody can say, but chances are that your graphics hardware is to blame, so update the driver...
Mylenium

Running slow... said my start-up disk memory was full and I'm only using 200GB of 1TB hard drive.

Running slow... said my start-up disk memory was full and I'm only using 200GB of 1TB hard drive.

How do you know you only have 200GB on your disk?
Where did my Disk Space go?
http://macmost.com/what-to-do-when-your-hard-drive-is-full.html
OmniDiskSweeper is a good program to see what's taking up space: http://www.omnigroup.com/products/omnidisksweeper/

Firefox starts up, and when home page pressed, program does not respond. What can be done?

When Firefox is started, the circular think button continues to run, but the program has only started one new tab. When the Home Page button is clicked, program seems to lock in a 'Firefox not Responding' error message. When I try to shut it down by using upper right corner X, it gives two choices, "Wait for the program to respond" of "Shut down program". I choose Shut down program, and in the background a message saying 'Windows checking for a solution' although it never comes back with one. What I'd like to know is will Firefox save my bookmarks if program is deleted and a newer version of Firefox is downloaded?

Please update to the current Firefox 27 release.
*Help > About Firefox
You can find the full version of the current Firefox 27.0.1 release in all languages and for all Operating Systems here:
*http://www.mozilla.org/en-US/firefox/all.html
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

I have a Macbook pro mid 2011 and just bought the Apple TV. While watching program or movie from any of the apps such as Watch ABC, the program keeps stopping and starting constantly.

I have a Macbook pro mid 2011 and just bought the Apple TV. While watching program or movie from any of the apps such as Watch ABC, the program keeps stopping and starting constantly.

That would indicate a network issue.
Reboot ATV and router
Make sure DNS is set to auto
Ensure router is up to date, if on wifi try ethernet
Go to istumbler.net to get a report of the network, look for signal strength and noise

I have the program Adobe Photoshop Album Starter Edition 3.2 on my PC and some photos from a camera have transferred to it. It says the program has expired and cannot be renewed, how can I get my photos back?

I have the program Adobe Photoshop Album Starter Edition 3.2 on my PC and some photos from a camera have transferred to it. It says the program has expired and cannot be renewed, I am unable to click on the photos. How do I get them back?

Photoshop Album Starter Edition support withdrawal FAQ
This will tell you where your photos are.

How do I Initialize a button to be enabled when the program start and if pressed then disable and gray it until a certain action is taken then comeback to the enabled state?

Hi!!!
I'm doing a program with the following buttons: Run, Abort, Repeat and Exit. When the program starts from the first time only Run and Exit button will be enabled and not disabled so the user doesn't press the Abort and Repeat button. The user has to select from a menu bar the test he wants to make then if he presses the Run button a pop up window will come up asking for the serial number and his name, and will comeback to the main program with the entered information. The user now has to press the Run button again to start the test, when the test starts the Abort button now will be enable
d and not disabled, when the test ends the Repeat button will be enabled and disabled. If the user selects new test from the menu bar the whole process will come again. I'm having problems with the menu bar because it has a time-out and when that occurs the program gets crazy. Also I'm not sure about what mechanical action I have to use for the Run. Do I need to count the times the Run button is press so the 2nd time is pressed it will be disabled. Do I need to use a sequential and where I initialize the buttons so the first time they are like I want (Inside or OUtside the while loop that ends with the Exit button) Any help wil be appreciated.

I'm not sure about the menu bar because i've never used them..i tend to go for listboxes instead.
As for the buttons, if you want to wire the button to a local variable then the button must be a switch, otherwise a latch is ok. But remember you will probably need to reset the button at the end of a run (ie. wire a constant through the while loop to the local variable for the switch). To initialize the buttons at the start, wire constants to their locals outside the main execution while loop.
Put the disabling/enabling functions in the parts of the program the button has activated. For example, you say the 2nd time the Run button is pressed you run the 'test', enable the Abort button and want to disable the Run button - put these property nodes into th
e 'test' sequence/loop.
Sequences are useful to control when you want buttons to be modified. I use them if i cant sequence the order of execution any other way. But try and avoid using multiple frames as it can get confusing if you start hiding code.
If you are still having problems, post an example of your program in no higher than LV 6.0.2 and i will try and adapt it for you.
Kim

How to stop mail from recovering the same message over and over again to the extent that it has wiped out all start up disk memory?

How to stop mail from recovering the same message over and over again to the extent that it has wiped out all start up disk memory?

You need to find and delete (move to the Trash) the offline mail cache (.offline cache.) It's a hidden folder (files and folders with a preceding dot are hidden) inside the Mail folder (inside IMAP) in your user library. Since it's hidden, in order to see it run the following command in Terminal in Applications>Utilities. Hit return/enter once you have pasted in the command.
defaults write com.apple.finder AppleShowAllFiles -bool true ; killall Finder
To reverse this and hide all those hidden files and folders again
defaults write com.apple.finder AppleShowAllFiles -bool false ; killall Finder
Leave hidden files/folders enabled until you finish emptying the Trash so you know it's gone.

My MacPro says the startup disk is too full. I have 4 internal hard drives that have 2T each so there is plenty of space, but all start up programs, libraries, iTunes and application folder are on the '1st' hard drive. Can I move any to 2nd drive?

My MacPro says the startup disk is too full. I have 4 internal hard drives that have 2T each so there is plenty of space, but all start up programs, libraries, iTunes and application folder are on the '1st' hard drive. Can I move any to 2nd drive?

Your system will likely fit just fine on a small fast 250GB SSD
What you have is lots of stuff that should not be on the boot drive, data and graphics or media files and libraries that should be moved to another drive.
If you are getting a message like this, STOP, off load files, make room, and make sure to have 15% free or more.
Do not try to move anything from system and its library and sub folders. Move your home user account and just leave the essential home library but move all the rest.
A full drive can have trouble finding free space segments and writing out updates to files and to the directory. And loss of directory means loss of where files are located and their segments.

HT1338 I updated my MacBook Pro with Mountain Lion and now it is starting slow and opening with some of the programs. How can I fix the problem?

I updated my MacBook Pro with Mountain Lion and now it is slow in starting up and loads a number of probrams. How can I fix the problem?

Have you tried starting in Safe Mode and see if the slowness still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)
If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours.
Reboot normally and test.

BSOD and Memory (perhaps)

Over the last six weeks I have run into a number of BSOD issues which have left me both perplexed and yet and at the same time livid.
The messages onscreen are inconsistent although the crash invariable occurs when playing a game, every game in fact except Medieval Total war (for some reason).
I have attempted to analyse the memory - memtest ran overnight and found no errors. The finger of blame then shifted to point to Norton which has now been blown away, PSU has been checked, thermal paste reapplied etc etc
I was having issues with Nvidia 57.62 drivers but rolled back to 53.03 and that situation seemed to resolve itself in as much as no specific dll was mentioned on the BSOD. Every message seems to point to memory (when followed up on Google) but I would like to resolve any problem if I can rather than replace the memory sticks.
Memory timings were set by SPD at 7-3-3-2 and Crucial are a company related to Microm if that helps
IRQ settings are as follows - if that helps
IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 11   NVIDIA nForce PCI System Management   OK
IRQ 13   Numeric data processor   OK
IRQ 14   Primary IDE Channel   OK
IRQ 15   Secondary IDE Channel   OK
IRQ 19   NVIDIA GeForce FX 5700 Ultra   OK
IRQ 20   Standard OpenHCD USB Host Controller   OK
IRQ 20   NVIDIA(R) nForce(TM) Audio Codec Interface   OK
IRQ 21   Standard Enhanced PCI to USB Host Controller   OK
IRQ 21   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 22   Standard OpenHCD USB Host Controller   OK
IRQ 22   NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)   OK
Sorry to be vague with the BSOD message info but if I see one more tonight Mr Fist will meet Mr Screen at extreme velocity
Thanks in Advance

IRQ's are fine
So drivers and Norton are the only thing you've introduced to this system prior to this problem?
How long has this OS been up and running?
Have you installed a lot of programs and/or uninstalled them?
At first, I would consider several things.
I need to look back and try to remember when it started happening and then try to tie in what how and when (changes) I've made to the OS, such as new programs, drivers, introuduced new hardware etc. After some investigation, if I can't attribute this problem to possibly any changes I may have made, then I have to consider a hardware or power problem. I don't have either of the latter as I have a good supply like you and I use a UPS with a line conditioner.
You've tested the RAM but that doesn't rule out a problem completely but good enough to look elsewhere for the time being. If it worked great before, no sense in changing memory settings, logic tells me that's like swatting the dog for crapping on your new carpet, when it was really your one year old's diaper that's leaking.
By now I may have come to the conclusion it's probably me that's introduced or had a hand in cocking up my system and I consider a full reformat and re-install to verify my suspicion. It's certainly takes me less time to load the OS then to nitpick around, especially with how I beat up my OS on a regular basis. I can't even go 9 months before I decide it's time.
Just some things to think about, no point in getting angry at a computer, you own it so you have a right to abuse it

I seem to have inherited a lot of issues from previous macs i've had over the years resulting in my present iMac (21" 2.9Ghz i5) behaving strangely! Its slow on start up, and safari settings seem to reconfigure themselves ?? Any idea's ??

iMac 2.9Ghz intel i5
8GB
21.5"
Data migrated from a macbook pro and previously from an older iMac.
Can I restore to a clean start-up and re-install apps (docs, photo's music etc)from time machine without
bringing the issues that are causing a few issues.
ie Some web sites will not open ( I have checked that the sites are live).
Slow start up.
Some web sites ask me to check cookies- I've not changed them, and the problem is not constant ? (Safari is main browser).
Any advice gratefully received.
Tony

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Program start-up and Memory

Similar Messages

Maybe you are looking for