Program to change the Incompletion of order

Dear All,
We executed on Zprogram (Call standard BAPI) to change Profit centers for open orders, but due to some bug  completed orders program changed and removed the plant/shipping point and set incompletion log at item.
But Header status is completed/ but item data is incomplete due to plant and shipping point missing.
There is no opition to update. Could you please suggest how to make complete this orders.
Regards
Ramki

>
ram ki wrote:
> SAP note 106567 and program SDVBUV00 which will remove VBUV entries.
I don't think that will do any good. Removing the incompletion log entries does not correct the error.
Suggestion: find the bug and solve that bug.

Similar Messages

  • Unable to change the existing sales order

    Hi
    I need to change the existing sales order document which was already created and replicated into R/3.The following error has been giving
    "Document is being distributed - Changes are not possible".
    Can anybody help me how to change the document.
    early response would be rewarded,.
    Regards
    Vikram

    Hi Vikram,
    The problem is caused by a program error.
    Please follow the SAP Note for complete information.
    SAP Note : 718065
    Regards,
    Johnny.
    Reward with points if it helps.

  • Want to change the default sort order of a Advanced table

    Hi all ,
    Hope all of you doing good.
    I am trying to change the deafult sort order of a " View Applicants" advanced table on Irecruitment selfservice page , using personalization feature but its not sorting as expected.
    The default sort order is asc by the name of the applicants. I wanted to override it by " Date Applied " desc using personalizing the advanced table.
    But its not sorting by Date applied and still shows the sort by applicant name.
    Any inputs will be greatly helpful
    I am using the Oracle Apps 11.5.10 version.

    Hey guys m I got the answer for the below question.
    Oracle have few Restriction and limitation on such Advanced table in sorting the data,
    Few of them are as mentioned below ...
    1. Sorting is not allowed for tables that allow inserts.
    2. Sorting is not supported for tables containing updateable columns
    3. Sorting is disabled when the Select column is checked for a row in a table or when Hide/Show is present in a table.
    Because of the above limitations , we cannot sort or override the existing alphabetical name sort order to Date applied sort order on the View Applicant advanced table.
    You can observe that , View Applicant page is having an option called "Update Status" which allow us to update applicant’s status or rating in the Advanced table.
    On such updatable advanced tables, oracle does not allow us to override the sort order on any of the table columns.
    Keeping it in a nutshell , I can say it's does not allow us to change the sort order of the view applicant advanced table ( which is having updateable columns ) to sort them in Date applied instead of Name( which is default ).

  • Changing the Site URL of a Sharepoint site changes the content type order

    Description
    Changing the Site URL of a Sharepoint site changes the content type order of all lists that
    * contain folder content types
    * and have a custom content type order
    * where a folder content type is the first content type in order.
    Reproducible behaviour
    1. Create a Team Site in Sharepoint
    2. Create a Task List "Test" on the Team Site
    3. Go to List Settings
    4. The Content Type order is by default
        a. Task
        b. Summary Task
    5. Change the Content Type Order to
        a. Summary Task
        b. Task
    6. Go To Site Settings "Title, description and icon"
    7. Change the Site Url
    8. Go To List "Test" List Settings
    9. The Content Type order now is
        a. Task
        b. Summary Task
    10. Select "Change New button order and default content type"
    11. Here, the Content Type order still is
        a. Summary Task
        b. Task
    Is this a bug? Has anyone noticed this behaviour before?
    Kind Regards,
    Joachim

    Hi Joachim,
    You are not missing something or doing something wrong. i Hope :). This behavior is reproductible.
    The granularity of change is better by Powershell. But by the interface is most user-friendly.
    Maybe that's the reason of this behavior.
    Gilles Martinez
    Twitter
    Blog
    Please mark as helpful/answer if this resolved your post

  • ABAP Program Name CHanging the PSA Load status

    Hi,
    Our Scenario is Non-SAP -> PI -> BI.
    Every Day PI reads the file from source and it will directly upload to PSA in BI.But in PSA the status will show as yellow only it is not turning to green.But I am able to see the data in PSA but status is yellow.
    When we activate the Data source manually the load status is turning to green.
    I heared there is an ABAP Program to change the status.If anybody knows pl provide me the details.
    Regards
    Ram.

    Hi Ramakanth,
    Yes, that right. I have mistaken here because our pos dispatcher pumps data source every 15 mins thats why its in yellow status. I am sorry about that.
    Usually there are some reasons why the PSA in yellow.
    1. If the data is being loaded from PSA to data target, it will be in yellow
    2. If the data is loaded into PSA then it will be in yellow
    3. If we make any changes in the PSA for example deleting few records in psa and then added and transferred records doenst match then it will be yellow. In this case we have to manually change the status.
    In your case I am not sure y its not getting into green once is done. We never had any issue. Pos dispatcher runs and uploads the data into PSA and then we upload into targets.
    Thanks
    Srikanth

  • Is there any program to change the color of requests

    Hi,
    I want to know is there any program to change the traffic color of requests.
    It is showing wait time until 'next months' date'.
    The option to change time out is greyed out in the Infopackage schedueler.
    Please sugegst anything.

    In RSMO Settings -> incorrect waiting time for request -> Change the time
    Regards,
    B

  • Changing the default printing order

    How do I change the printing default order from "back to front" to "front to back"? Until now, I change it every time I print more than 1 page, but I'd like to change my default. I've looked at all of the Edit Preferences and can't find the option I'd like to change.

    Take a look in the Export Action script of whatever adapter you are using. This is where the output format is defined.
    Forgot to mention if you are using the Essbase adapter you can do this via setting the calc sequence for each dimension which will determine the order it is displayed in the output file. This can be set in the workbench or web client
    Edited by: SH on Oct 18, 2011 9:43 AM

  • I want to change the top level order of itunes playlists

    This is rather odd problem.  There is a lot of information available regarding organising tracks within playlists but I want o change the top level order of the playlist themselves.
    I have an ipod to car CD player adaptor that can select itunes playlists as if they were  single CDs.  The problem is that the adaptors works through the list of itune playlists in order i.e. the first "CD" is the "classical music smart playlist" followed by the other default smart playlists and then by my own playlists.  What I want is force the smart playlists to the bottom of the top level list so that the adaptor finds my playlists first.  I am considering deleting all smart playlists but I see some value in keeping them.  I think the answer is no it can't be done but I be interested to hear if anyone has some ideas on this.
    N.B. I am using itunes 12.01.26 on my Macbook to manage my itunes library.

    Hey guys m I got the answer for the below question.
    Oracle have few Restriction and limitation on such Advanced table in sorting the data,
    Few of them are as mentioned below ...
    1. Sorting is not allowed for tables that allow inserts.
    2. Sorting is not supported for tables containing updateable columns
    3. Sorting is disabled when the Select column is checked for a row in a table or when Hide/Show is present in a table.
    Because of the above limitations , we cannot sort or override the existing alphabetical name sort order to Date applied sort order on the View Applicant advanced table.
    You can observe that , View Applicant page is having an option called "Update Status" which allow us to update applicant’s status or rating in the Advanced table.
    On such updatable advanced tables, oracle does not allow us to override the sort order on any of the table columns.
    Keeping it in a nutshell , I can say it's does not allow us to change the sort order of the view applicant advanced table ( which is having updateable columns ) to sort them in Date applied instead of Name( which is default ).

  • Orders already invoiced status can still change the amount/qty order

    HI Experts,
    How to configure the amount/quantity of Sales Order should not be able to change the amount once the invoice is created?
    Thanks a lot!

    Dear Cecilio,
    this is possible with the user exit modification stating that
    if VA02 then make the order quantity and amount fields disable.
    user exit  : FORM USEREXIT_FIELD_MODIFICATION
    PROGRAM : MV45AFZZ.
    IF sy-tcode EQ 'VA02'.
            IF vbak-vkorg EQ 'YOUR SALES ORGNS'.
              screen-input = 0.
    Regards,
    balajia

  • Standard Tool / Program to Change the Workflow Status

    Hello,
               I would like to know if there is any standard program to Change Status of the Workflow from IN PROCESS to ERROR. I know that there are Standard SAP tools using which we can restart the Workflows that are in ERROR Status. But for changing the Status of the Workflow from IN PROCESS to ERROR, I've not come across any tools / programs. I would really appreciate your help. Thanks in advance.
    Regards,
    Venkata Phani Prasad K

    sorry correction ..FM SWW_WI_CALLBACK_CHANGE_S can be used to correct the status without any check.
    I came across this issue where a dialogue workitem was logically deleted in order to remove it from the user inbox. Later an incident was created that the work-item is still needed to perform the rest of the workflow action. The solution should have been to complete the work-item by executing the terminating event of work-item or complete the work-item manually(SWIA). But instead some one performed  logical deletion.
    so in order to revive the workflow i needed to change the status form logically deleted to ready status. for this i found this FM which successfully changed the status form logically deleted to ready status. It though lost the agent assignment but i forwarded it manually to respective user.
    Regards
    Dharmendra
    TCS India.

  • How to change the standard purchase order ???

    Hi,
       i am trying to change the output form of standard purchase order.for that i copied the standard script/form to my own created script/smart form.i modified it as per user requirement and i have given the same name in NACE>EF>output type>NEU>processing routine..in place of the standard one.and i have also activated the standard program i.e. SAPFM06P.but when i am going to me22n and print preview the previous form format is coming...
    if i will create my own smartform then it is difficult for mapping all the fields to me22n...user can not input other fields in me21n if i am giving my print program name in NACE...
    can anybody please help me...????
    pls reply soon,....
    Regards
    Amayika

    Hi,
    Are you sure you have set it for medium 1 (print output) and specify the program, FORM routine, and the Form/Script correctly?
    Another reason is the output type is not set up yet at the PO. Go to ME22N and click Messages button (next to Print preview button) and check whether your output type is already there. If it is not, then create one.
    Please also check that you have copy client the form/script from development client to test client (SAPScript need this but no need for Smartform) using T-Code SCC1. And the config is configured properly in test client.
    Regards,
    Teddy

  • Change the default service order type for repair order - RA

    When creating a repair order (RA), a service order of type SM03 is triggered. The default order type is SM03. How can I change the order type?
    Thanks in advance...

    hi,
    try to change in OIOL and check ..
    regards
    pushpa

  • How do I change the PDF reading order without changing the image color or Lists?

    When I change the reading order in a PDF (created using InDesign), some images are getting darker. Any idea how to change this back (no, CTRL+Z doesn't work) or prevent it from happening?
    On a related topic, my PDF passes the 508 compliance check before I change the reading order, but afterwards the Lists have errors. I cannot figure out how to fix these errors manually.
    Thanks!
    (Topic originally posted in InDesign forum: http://forums.adobe.com/thread/1351206).

    You may have more luck getting a response in the Standards & Accessibility Acrobat forum:
    Standards & Accessibility (tagged PDF)
    Accessibility questions come up only rarely in the InDesign forum and its outside the knowledge of most of our users.

  • How do I change the mailmerge sort order

    When I want to send a Mail Merge using Pages to read an Address Book Group sorted by Surname, the resulting merge is produced sorted by First Name. This means every Merge has to be manually sorted, which is time consuming and wrong.
    A merge letter I have used successfully for over three years, every time sorted by Surname, now produces the wrong sort order and cannot be changed. If I change the sort order in Address Book Preferences from Surname to First Name and back again the behaviour is unchanged. If I change the Sort order to "by First Name" it stays the same. Nothing seems to reassert the correct sorting order ie by Surname.
    How do I change it?
    TIA

    Basilisk,
    Numbers will Mail Merge to Pages in the order of the Rows in the Numbers database. I always use Numbers for merging to Pages because I like the control it gives me of the order of printing but also because of the simplicity and versatility of controlling the content.
    It couldn't be easier to move your data from Contacts/AddressBook to Numbers. Here are the simple steps:
    In Contacts/AddressBook, Create a Group for your friends or clients that you wish to use with Mail Merge. Drag all the relevant subjects into that Group. (You probably have already done this.)
    In Numbers, Create a new document and delete any default Table that appears in it.
    Arrange your Desktop so you can see your Group list in Contacts and your new blank Numbers Sheet at the same time.
    Drag your Contacts Group to your blank Numbers Sheet, creating a Table in Numbers with all the data of your contacts. You won't see all the data right away because some of it is in Hidden Columns.
    Click on a cell in your Numbers Table to activate the table and Hover your mouse pointer over a column label tab in the Numbers Table. Click the menu triangle and Select: UnHide all Columns.
    Now you can see all the data and can proceed with organizing it into the order you want the merge to have.
    Remember to Save your organized Numbers document before you begin to setup the merge links in Pages. Save the Numbers document each time you make changes to it, prior to doing a Mail Merge.
    Jerry

  • Change the value of order Person Responsible in bapi_alm_order_maintain

    Hi Expert,
    I want to change the value of person responsible in order Tab.  and also i want change Person Responsible for multiple order .
    How can i change ....  please  write code.

    Hi,
    You can use the remodelling here with the option " Replace Characteristics" with Customer exit. It will allow you to write an exit and change the value. Find more here:
    http://www.scribd.com/doc/7882193/Remodeling-in-BI-70-Using-Customer-Exit
    Thanks...
    Shambhu

Maybe you are looking for