Program to create users

Is there any program in SAP , where i can customise to create users.
Like when i enter a number 123 it should create a user called abc123 wiht a default role
Thanks in Advance

Hello Balaji,
You can find it on your own.
Go to transaction SE93 and provide the transaction name & click on display button. it will show the corresponding program
eg: Transaction: SU01
Program name : SAPMSUU0
Screen number: 0000
Considerable ABAP knowledge is required for customizing standard programs.
Open the ABAP program eg: SAPMSUU0 in ABAP editor (SE38) and choose copy program from the menu. Give your new Zprogram name, Then do the modifications in your newly created Zprogram.
NB: A transaction may consist of several screens & Programs (includes etc..)
Regards,
Ammey Kesarkar
<i>'Award points for useful info'</i>

Similar Messages

  • Program to Create Users in Multiple Clients at Once

    Hello experts.
    We have a multi-client architecture and I have to frequently create users in many of them at once.
    Is there a fast way or does anybody have ABAP code to create users in multiple clients by while also an existing users Roles?
    We have a program to copy the users, but I still have to go into every system and assign roles.  This is very tedious, so I would appreciate any help.

    Hello Valhalla,
    Try this way:
    BAPI_USER_CREATE1 is remote enabled so you can create RFC destination for the all the system
    you want to create users.
    Load all the rfc destination in one table.
    Load all the users need to be created in one table.
    Loop at rfc_dest_tab.
        loop at users_tab.
             CALL FUNCTION 'BAPI_USER_CREATE1' DESTINATION rfc_dest_tab-RFC_DESTINATION
      EXPORTING
        USERNAME         =  users_tab-USERNAME
      NAME_IN          =
        LOGONDATA        =
        PASSWORD         =
      DEFAULTS         =
        ADDRESS          =
      COMPANY          =
      SNC              =
      REF_USER         =
      ALIAS            =
      EX_ADDRESS       =
      UCLASS           =
    TABLES
      PARAMETER        =
      RETURN           =
      ADDTEL           =
      ADDFAX           =
      ADDTTX           =
      ADDTLX           =
      ADDSMTP          =
      ADDRML           =
      ADDX400          =
      ADDRFC           =
      ADDPRT           =
      ADDSSF           =
      ADDURI           =
      ADDPAG           =
      ADDCOMREM        =
      GROUPS           =
      PARAMETER1       =
      EXTIDHEAD        =
      EXTIDPART        =         .
    ENDLOOP.
    ENDLOOP.
    This will create required user in remote SAP systems.
    Hope this solves your issue!
    Thanks,
    Augustin.
    Edited by: Augustarian on Aug 22, 2009 11:52 AM
    Edited by: Augustarian on Aug 22, 2009 11:52 AM

  • Calling an AS400 RPG program to create users on AS400

    Hi,
    our customer has a custom application on AS400.
    To create users for this application, the customer uses a RPG program that both creates the AS400 user, populates the application custom tables, and do other stuff needed for the user definition.
    Now,
    Is it possible to use the IDM OS400 adapter to invoke the RPG program?
    Or ... which is the best way to create a custom adapter to fulfill this task?
    Regards!

    Hi, We also need to call RPG from ABAP via RFC. We have installed the RFC SDK on A/S400 and tried call ABAP RFC from RPG, but still don't know how to make RPG program callable from ABAP
    Any advice!
    Many thanks
    Tim

  • Write a program to create users in FileRealm

    I am trying to create several hundred users in the default file realm and would be interested if anyone has a solution to this problem.

    Hi Greg,
    I've never tried what you want, but I noticed a post where someone was doing something very similar to what you want, and may help you..
    Check out
    http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.security&item=6093&utag=
    Cheers,
    Joe Jerry

  • Program for creating a model is locked by User

    Hi Guys,
    We have created a process chain to create the Integration Model and to activate the Integration Model using this prg RIMODGEN. So, This prg we have created variants for different location wise. This process chain contains 13 processes For each location, which is running in parallel. Some time we are getting the error message " Program for creating a model is locked by User
    Regards

    Dear  Pullaiah,
    Locking happens if there is any overlap of models or duplicate  scheduling of jobs with same variant.                                                                               
    See include LCIFIF01                                                                               
    CALL FUNCTION 'ENQUEUE_ECIF_IMOD'                                    
      EXPORTING                                                          
        mode_cif_imod  = 'E'                                             
        modelname      = i_modid                                         
        logsys         = i_logsys                                        
        apoapp         = i_appl                                          
      EXCEPTIONS                                                         
        foreign_lock   = 1                                               
        system_failure = 2                                               
        OTHERS         = 3.                                                                               
    So this means for you, you get the lockentry if the modelname, logsys and apoapp is the same. So please check again your variants if there is one with the same integrationmodels.            
    This can be the only reason we you get here this entry in your joblog.
    Regards,
    Tibor

  • User Exit to call program to create IDocs.

    Hi All,
    For any creation/changes of material master using MM01/MM02 (after save ) one of the user exit will trigger.
    From the user exit, I have to call the custom program to create MATMAS IDOCs.
    if any failures in changes/creation of material master. It has to roll back eveything created by program.
    Please let me know how to achieve this with out calling an event.
    Thanks - Vinay

    There are a number of standard methods to automatically create the IDOC.  You can activate the change pointers and depending on need, use BD64 to create a distribution model, and create the necessary WE20 setups to create the outbound IDOC.
    If you have to process the IDOC using custom logic, you can define that as well - although it's not clear why you need a custom generating program.  You can insert code into one of the IDOC user-exits to manipulate the content if needed.  Also, don't overlook the pre-delivered stuff from SAP that provides filtering out of segments and the like.
    There are a few good SAP PRess books about doing ALE distribution -- if this is an unfamiliar area, it's worth the cost to buy one -- if you spend any time around IDOCS, you'll appreciate it.

  • User Exit that will allow the SAP program to create DN, but not create IDO

    Hi all,
    The requirement is when we select 1 PO in VL10g transaction and click the u201CBackgroundu201D button, the user exit will allow the SAP program to create Delivery Number, but not create IDOC for the Delivery Number to send it to warehouse system.  Also the created Delivery Number must be in changeable mode in ECC system .I need to find any exit to make the DN table field LIKP-VLSTK not to be u201CBu201D (distributed).  The B will make DN not changeable in ECC system which is hard coded value in standard program. so the DN should be changeable.
    Please suggest me the User Exit name which serves my purpose.
    Thanks in advance
    Latha.

    Welcome to SCN!
    Here is some code that will allow you to find exits and BADIS on your own:
    [Code To Find BAdi|https://wiki.sdn.sap.com/wiki/display/ABAP/CodeToFind+BAdi]
    Rob

  • How do you Install programs to one user account on a macbook pro?

    I want to download programs to my user account on my laptop without the other peoples accounts having access to it. How do you specify only to download to this account, or change the settings of past installed programs to only be accessible to my account and not the others

    As Csound1 has already pointed out create a folder in your Home folder for only those applications that you want exclusive access to like this one in my Home folder:
    For those application that have an installer, you'll need to install and then move the app from the Applications folder to your own app folder.

  • Is it possible to create user defined control in labview

    in .net we can create user defined contol in which i can put more then one control and,, can use it as single control when needed,, but,, how this possible in labview,,
    actually in my program i have a tab control and,, in that tab control there are 8 pages,, now there are 5 different kind option selection for each page lets say "a" "b" "c" "d" "e",,,,,.,. so,, when i select "a" configuration for tabpage 1 should show.. "a"(control collection)  on tabpage1....and,, same should b possible for all 8 pages............................. this can possible if its possible to create user defined contorl in labview
    while in .net its very easy task i m confused here,..,.
    i put these controls in another 5 different  VI,,,, and tried to call in subpanel but,, i dont find the solution,,,
    Attachments:
    tabcontrol.vi ‏1 KB

    Hi,
    I've tried to open you attachment but LabVIEW tells me it's not a vi... could you check it and repost please ?
    I'm not really sure of what you need but you CAN customize you control in LabVIEW, it is not hard, you just have to know how it works
    Sometimes being good at another programation language confuse you more than it helps because you try to do as you are used to... the difficulty it to "translate" functions from a language to another.
    I do know how frustrating it can be when you think "Damned, it would take me only 5 minutes to do that with language a and after 10 hours with language b it is still not working "
    You have to get in LabVIEW way of thinking, I wish you good luck !
    A quick exemple... this might not do exactly what you need but it may help you anyway.
    When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
    Attachments:
    exemple.vi ‏55 KB

  • RFC - Calling Function Module in a local Windows Program (.exe) on user PC

    Hi Gurus !
    Has anyone ever tried to call a local program on the user side through RFC ? Actually, this programme should allow the use of function module from ABAP programs.
    Indeed we want to use some device locally installed, here a device to pay using Credit Cards.
    However, we've almost successfully filled our requirements if the destination RFC is activated as a Registered Program. But a user B tries to access device of a user A if the code and destination are the same. So we need to create as many RFC destination as users.
    So, we'd like the frontGUI to call the local EXE. This EXE would be coded in VB btw. But we can't figure out how to set the program to register on SM59, using "Start on Front-End Station" option.
    Has anyone any clue on how the program should look like ?
    Thx in advance,
    N H

    Hi MxG,
    I guess we're close to the solution.
    So, using the .Net Connector, and declaring inside our program the Host and Server Class, we've managed to use it, as a registered Server Program. Actually our Registered Program is a Windows Service running on the local computer that the RFC Function Module refers to.
    While testing this it's appeared that user B was trying to use device on User A, event thought devices and services were installed on both computers.
    I guess there's something we're misunderstanding or missing when we try to convert our solution to a Front-End solution. The program is obviously incomplete, something is missing. But I can't find any example or start-up for that program. Even in SAPHelp, there's only something saying that "you can do your own program for front-end and RFC"...   :/
    Well, I've just realized I've reformulated my issue, but since it's confusing for me, it's actually not easy to describe and make sure it's understandable !
    Regards,
    N H

  • Gaps appear in IE 6 browser window for hidden fields in Create User form

    Hi,
    I need an urgent input on this one.
    I hid an OIM default attribute for users in the 'Create User' form by modifying clear_all_fields.js
    The field is hidden from the 'Create User' page fine!
    But if I open the page from Internet Explorer 6 it shows a gap in the place of the hidden field.
    For Mozilla 3.0.5 the gaps are not appearing.
    I tried removing these gaps by deleting the tags and the field in the clear_all_fields.js
    or, by reducing the dimension of the spacer.gif in GenerateCreateUserForm.jsp.
    But it reflected no change in the form look n feel.
    The requirement is to hide the fields and not remove them.
    Any suggestion as to what may be the way out?

    Thanks for the update Leonard. This would be an extremely useful plugin. I've been looking for it on http://labs.adobe.com/technologies/ under the plug-ins tab but have been unable to find it. It wasn't even there in the Pre-Release Programs. Is it located somewhere else or with a different name? Please let me know.
    Meanwhile, I've been trying to write my own VB script to get the button clicked. Here's what I've come up till now-
    FindText
    HiliteList.Add->CreateWordHilite->SetTextSelect->GetBoundingRect->PointToDevice
    The last function seems to be deprecated. Also there's nothing to connect the text highlighted by findtext with HiLiteList.Add. I guess
    I may have to use the JSO word search method.
    Any advice, as always, would be much appreciated.

  • How to create user credit control via customization

    Hi !
    I have to create user credit control via Transaction :
    SPRO.
    path:
    Sales and Distribution->Basic Functions->Credit Management/Risk Management->Credit Management->Define Automatic Credit Control.
    I want to check the user checkbox, and create my logic
    of credit control.
    In the help of credit control screen, it says that i have
    to use user exits LVKMPTZZ and LVKMPFZ1.
    However when i looked for that user exits at SMOD
    that user exit don't exist !!!
    How do i use those user exits ? Why can't i find those user exit ?
    Can you give me please  a code example of how to use
    the user checkbox to change the logic of credit control ? or any material about the issue.
    thanks
    moshe

    Hi,
      You dont find the programs LVKMPTZZ and LVKMPFZ1 in SMOD transaction, check in SE38 by typing the program names, there you have the provision to write your custom code,
      As user exits are specific to the business, it would be difficult to send the sample code to cater the functionality expected by your business,
    Hope this helps,
    Rgds,

  • SQL Developer Error Creating User Home

    SQL Developer was running fine on my Windows 7 64-bit machine until Monday morning. Now when I kick it off (from my Desktop shortcut), I get a small box saying: "Error creating user home in directory C:\Users\<username>\AppData\Roaming\SQL Developer".
    There is no error number, and I have been unable to find this error in the SQL Developer documentation. What does it mean? It's possible that updates were pushed to my machine over the weekend (unknown -- network sysadmins are elsewhere), but I would have thought I would have gotten a different message if there were compatibility problems. Have I accidentally deleted a necessary file from my local SQL Developer folder? My connection databases are Oracle 11g.
    Thanks for any suggestions.

    Hi,
    Here is a thread on the same issue, but so old that the advice it gives is no longer accurate:
    Re: Error creating user home in directory D:\Program Files\raptor\jdev.
    So let's assume you no longer have write access to your own Windows user directory. To workaround that just add the following to one of the conf files in the SQL Developer installation folder. For example, to run SQL Developer from a flash drive, I modified my E:\sqldeveloper\ide\jdk.conf to include
    AddVMOption -Dide.user.dir=../../.sqldeveloperSo that the user home is E:\.sqldeveloper
    Regards,
    Gary
    SQL Developer Team

  • How to create user defined transactioncode in bw

    hi,
    How to create user defined transactioncode in bw.My user want this
    regards,
    Abhishek

    hi 
    by using the t code SE93 u can create.
    after that it will ask u for what ur going create
    1.Program and screen
    2.Program and selection screen
    3.method of class
    4.transaction with variant
    5.transaction with parameter
    here u have to select appropriate option based on ur requirement
    and enter the options as per ur needs save and activate

  • How do you set default programs for all users when deploying Windows 8.1?

    I have my Windows 8.1 image set up the way I want including the start screen, theme, etc. But how can I set the default programs for all users. Most of out computers are non-touch and I want the desktop apps (e.g. Windows Photo Viewer), not the store apps
    to be the default for opening pictures, videos, etc. Can that be done?

    Great question, this has been bugging me too!
    So, I did some research by using "Set Default Programs" app in Windows 8. Then I ran the super ProcMon.exe tool from Sysinternals.com <Thanks Mark!>
    After filtering out the junk, I could see some *interesting* writes to the registry:
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.jpg\UserChoice]
    "Hash"="57y87/ogggU="
    "ProgId"="PhotoViewer.FileAssoc.Jpeg"
    But the "Hash" part had me concerned. I did some internet searching for the hash, and came across a post and a pointer to a blog with some answers.  This is both good news and bad.
    Background:
    One of the problems with Windows XP is that any program can come in and party on the entire system. No, I don't want you to put a shortcut on the desktop, install a crappy IE Toolbar, and change the default file association for *.jpg files to your app, I
    just wanted to play a stupid game. Since Windows 7, Microsoft has been attempting to block that functionality from the stupid applications, and give them back to the user. Take note of the last line in the ITaskbarList3 interface:
       Applications cannot programmatically pin themselves to the taskbar. That functionality is reserved strictly for the user.
    Of course that sucks for us IT Pros who may wish to create *default* working environments for corporate images, but there are some tricks we can do.
    Solution:
    This blog appears to have the answer:
    http://blogs.technet.com/b/mrmlcgn/archive/2013/02/26/windows-8-associate-a-file-type-or-protocol-with-a-specific-app-using-a-gpo-e-g-default-mail-client-for-mailto-protocol.aspx
    New for Windows 8 is a dism command: /Get-DefaultAppAssociations that allows you to export a control case from a known good computer. Microsoft the supports importing the exported xml file via GPO. For example, before I changed the file association, .AVI
    was pointing to the Modern App, after the change the /export-DefaultAppAssociations shows change to the new app:
    From:
    <Association Identifier=".avi" ProgId="AppXhjhjmgrfm2d7rd026az898dy2p1pcsyt" ApplicationName="Video" />
    To:
    <Association Identifier=".avi" ProgId="VLC.avi" ApplicationName="VLC media player" />
    I am still doing some investigation to see if a GPO is required, or if you can inject the association into a local user account. Also, if you do have some Modern Windows 8 Touch Tablets, it would recomend keeping most of the Modern App defaults in place,
    perhaps seperate GPO's for Desktops/Laptops vs Tablets?
    -k
    Keith Garner - keithga.wordpress.com

Maybe you are looking for