Programati​cally stop and start computer process
Is there a way to programatically start and stop computer processes/services using LabVIEW?
Thanks,
Taylor
Which OS? For Windows you can use System Exec to execute DOS commands to start programs. For services use the net start or net stop <servicename> commands.
Similar Messages
-
I had to get a new hard drive in my 27 in IMac. I used time machine to get everything back on my computer. I just turn on time machine and its says it's preparing over 800,000 items to back-up, it never back-up, it stop and starts the process over again.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then repair the backup/TM drive. -
Windows 8 All-In-One 1210v printer that stops and starts printing process
My printer has worked well until a few days ago when it suddenly started to load and begin printing, only to suddenly stop and "rest" then start again and do the same thing. This problem continues. The only thing I did that I thought might be the problem was to replace the ink cartridges.
I have checked with the " printer doctor" and tried all suggestions, including removing and replacing the cartridges. But that didn't work nor did the other suggestions there. I found no mention of my particular problem anywhere.
Do I need a new printer?I am sorry you are having an issue with your prints starting and stopping.
1.) How is the printer connected to the PC?
2.) Following these steps should help
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01940312&tmp_task=solveCategory&cc=us&dlc=en&la...
3.) Did you download the windows 8 drivers from our website and install it?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=90770&
I hope this helps
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
How to stop and start process SAPOSCOL
Hi, i have a problem with write access for saposcol program. I see that the file saposcol is read the file but its unable to wirte the same.
Collector : running
Start time coll. : Mon May 21 17:49:49 2007
Current Time : Mon Jun 11 13:27:51 2007
Last write access : Tue May 29 06:23:46 2007
Last Read Access : Mon Jun 11 13:26:24 2007
When i try to stop the saposcol i get the following error:
igzadm> saposcol -k
Setting Stop Flag :
13:24:44 11.06.2007 LOG: ==== Stop Flag was set by saposcol (kill_collector()).
13:24:44 11.06.2007 LOG: ==== The collection process will stop as soon as possible
can't kill process 409656.
kill: No such process
ERROR:No reaction from collecting process 409656.
Please kill collecting process.exes.
Am doing this command through SID<ADM> from change directory /run.
Please help me how to check the permission of the SIDADM to stop the services.
I also try the same from root user but now use..
Please guide me how to stop and start the SAPOSCOL in AIX 5.3.
Advance Thanks.
Suri TysonHi, i have the following permission for saposcol
imserv:/ # ps -ef | grep saposcol | more
root 118842 528422 0 14:02:17 pts/2 0:00 grep saposcol
I have changed the ownership as you mentioned....
imserv:/usr/sap/IGZ/SYS/exe/run # ./saproot.sh igz
Preparing /usr/sap/IGZ/SYS/exe/run/brbackup ...
Preparing /usr/sap/IGZ/SYS/exe/run/brarchive ...
Preparing /usr/sap/IGZ/SYS/exe/run/brconnect ...
Preparing /usr/sap/IGZ/SYS/exe/run/brtools ...
Preparing saposcol ...
Preparing icmbnd ...
done
However, i still get the error as:
igzadm> saposcol -k
Setting Stop Flag :
14:12:13 11.06.2007 LOG: ==== Stop Flag was set by saposcol (kill_collector()).
14:12:13 11.06.2007 LOG: ==== The collection process will stop as soon as possible
can't kill process 409656.
kill: No such process
ERROR:No reaction from collecting process 409656.
Please kill collecting process.
Now the permission are set in my system as:
igzadm> ps -ef |grep saposcol|more
igzadm 729196 983058 0 14:13:25 pts/2 0:00 grep saposcol -
How to stop and start only the process of Oracle Application Express?
I'd like to know how to stop the process of Oracle Application Express on my server installed oracle express package.
After installed Oracle Express edition, not only oracle database server processes but also Oracle Application Express, such as http server, is started automatically...
I hope to stop and start Application Express on demand but is this feature enabled?Oracle Apex is an API, if that helps you understand / visualize. You do not start Apex process nor stop it.
When an Apex session starts it starts calling the API.
You can however start / stop the listener. It may be OHS, ApexListener and the J2EE container running it, OC4J or any other "server" that you are using.
The built-in EPG is something like an API again, you cannot start / stop it but you can disable/enable it with DBMS_XDB.SETHTTPPORT API.
Regards, -
when i turned on my i pod a white apple logo was shown which then turned to rainbow colours and the i pod started buffering, this is all it does, i cannot get it to stop and my computer will not talk to the i pod, help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
defunct process when stop and start web server
Dear all,
I am using Sun One Web Server 6.1 SP6. When i try to stop and then start the web server. The <defunct> process is generated (his parent PID points to webservd).
The following is the result:
1st stop and start the web server (defunct process is generated)
2nd stop and start the web server (defunct process disappears)
3rd stop and start the web server(defunct process is generated)
4th stop and start the web server (defunct process disappears)
Here is my magnus.conf
ServerID www
ServerName www.abc.edu.hk
ErrorLog /i03_01/SUNWwbsvr616/https-www/logs/errors
PidLog /i03_01/SUNWwbsvr616/https-www/logs/pid
User nobody
DNS off
Security off
ClientLanguage en
AdminLanguage en
DefaultLanguage en
RqThrottle 512
StackSize 131072
Init fn="load-modules" funcs="caspreq,caspinit,casptrans" shlib="/i03_01/casp/module/sunos5_optimized/netscape_6.x/nes_casp2.so"
Init fn="caspinit" casplib="/i03_01/casp/asp-server-3078"
Init fn="load-modules" funcs="htaccess-init,htaccess-find" shlib="/i03_01/SUNWwbsvr616/plugins/htaccess/htaccess.so"
Init fn="htaccess-init"
Init access="/i03_01/SUNWwbsvr616/https-www/logs/access" format.access="%Ses->client.ip% - %Req->vars.auth-user% [%SYSDATE%] \"%Req->reqpb.clf-request%\" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length% \"%Req->headers.referer%\" \"%Req->headers.user-agent%\"" fn="flex-init"
Init fn="load-modules" shlib="/i03_01/SUNWwbsvr616/bin/https/lib/libj2eeplugin.so" shlib_flags="(global|now)"
TempDir /tmp/https-www-61c30017
# Load modules for PHP
Init fn="load-modules" funcs="php4_init,php4_execute,php4_auth_trans" shlib="/i03_01/SUNWwbsvr616/bin/libphp4.so"
Init fn="php4_init" LateInit="yes" errorString="Failed to initialize PHP!" [php_ini="/i03_01/SUNWwbsvr616/https-www/config/php.ini"]
# Enable statistics
Init fn="stats-init" update-interval="5" virtual-servers="100" profiling="yes"
any ideas? Thank- which OS & version are you running into this issue ?
- By definition, defunct processes (or zombie processes) are processes that have exited prior to it's parent calling a wait() on it to get the return status .
- couple of things I can think of to narrow down the cause of this issue
1. disable ASP & php plugins and see if this still causes this issue
2. try starting the web server with log level to finest and see fi you get any useful information from the server error logs
hope this helps -
Netflix keeps posting not available- have restarted it as directed but still a problem. Itunes movies dont download fast enough and stop and start. On the Imac computer no problem with sound or viewing.
What is your current connection using speedtest.net
I would check for interference using istumbler
Make sure DNS is set correctly on ATV (settings - general - network - configure DNS - automatic) -
I need to shutdown all my databases (ifs_Data and OEMREP), because computer people are going to run periodically a process to backup them. But I cannot find how to stop and start my oracle databases by commands (I need to create a bat file). I am using Win2000, Oracle 9 and iFS 9.0.1
Thanks for the suggestions,This can be a procedure to shutdown a database:
SET ORACLE_SID=<database_sid>
sqlplus /nolog
conn / as sysdba
shutdown <option>;
exit
<option> = Abort ( Not recommendable ), Immediate, transactional, normal.
Joel Pérez -
How may I automatically stop and start Mail services at a set time please
Hi folks. I was wondering if anyone could tell me how to automatically stop and start Mail services (or any other services) at a set time please in Leopard Server? Is there a script someone has created which might help?
Cheers, David ( a realy newbie when it comes to administering OS X server)launchd works through a series of XML documents that define tasks to run, either at launch, on a time schedule, in response to network events, etc.
So you'll need to create two .plists - one to start the mail server and one to stop it. They should be saved in /Library/LaunchDaemons. I'd suggest something like:
/Library/LaunchDaemons/local.postfix.stop.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>local.postfix.stop</string>
<key>ProgramArguments</key>
<array>
<string>/usr/sbin/serveradmin</string>
<string>stop</string>
<string>mail</string>
</array>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>1</integer>
<key>Minute</key>
<integer>00</integer>
</dict>
</dict>
</plist>
and /Library/LaunchDaemons/local.postfix.start.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>local.postfix.start</string>
<key>ProgramArguments</key>
<array>
<string>/usr/sbin/serveradmin</string>
<string>start</string>
<string>mail</string>
</array>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>4</integer>
<key>Minute</key>
<integer>00</integer>
</dict>
</dict>
</plist>
You'll need to either use launchctl load /Library/LaunchDaemons/local.postfix.stop (or start) to load the tasks, or reboot your server.
I'm curious, though, as to why you want to do this. Mail is typically one of the services that people want to run 24/7 so they don't miss out on any emails (even though SMTP can tolerate this). Why do you want to shut yours down? -
APEX 4.2 aligning issue of Stop and Start Grid Layout item
My APEX application application is in the process of moving from 4.0 to 4.2. I am experiencing an issue with aligning (left margin justified) of Stop and Start Grid Layout items that have a border around them. Earlier I had an issue with the border itself not showing up in the 4.2 application. I was able to resolve that with a workaround by adding inline code in the CSS section of the page: #P23_OFFICE_START_TBL {width:682; border:1px solid #369; margin:5px;}. This created the border which I needed, but there are 2 Stop and Start Grid Layout items that are indented and not aligning with the border of the previous line. I have tried a number of different things but none of them have worked. This seems like a very simple issue to fix but I am having a tough time resolving it.
I tried to put the item in question in a different grid, which corrected the indention but then I lost the border around the item. It seems that the above CSS code does not work on the new grid. I also tried to put attributes such as margin-left:5px; float: left; clear: left; float: left, in the CSS code but that did not work, too.
Any suggestions?
Thanks
Ajay KI deleted and added back the Stop and Start Grid Layout items not aligning properly. This worked. Apparently, the 4.0 to 4.2 upgrade did not handle/convert these items properly. Deleting and adding them back resolved the issue.
-
We have had a production issue crop up twice now where reports begin running slowly seemingly at random.
When this happens we can see from running SQL Profiler that the report queries are taking an extremely long time to execute. The same queries when run directly in management studio run quickly.
Initially I suspected parameter sniffing, and tried using OPTION (RECOMPILE) in the reports, as well as clearing out the particular query from the plan cache and running the SQL in SSMS to try and get a better plan etc but no amount of jiggery pokery by
me could get the queries to run any faster.
The really weird thing - is that stopping and starting the report server via the reporting services configuration manager instantly cures the problem.
I'd really love to know - why this might be? Is it something to do with the report server closing and re-opening its connections to the database? That's the only sort of thing I can think of...any ideas? Anyone? Any suggestions would be much appreciated.
LucasFHi LucasF,
In your scenario, usually we can monitor the execution log in Report Database. If you run below query, you can get the results how long the report takes to render (TimeRendering), how long to process the report(TimeProcessing) and how long to retrieve data
from Database(TimeData). You can check the starttime and endtime to know the total time for executing a report.
SELECT TOP1000 *FROM[ReportServer].[dbo].[ExecutionLog2]
More details information, please reference to similar thread below:
Steps for troubleshooting a slow SSRS 2014 server
Troubleshooting Reports: Report Performance
In SQL Server Reporting Services, a job will be created by SQL Server Agent if any of the following processes is underway:
query execution on a remote or local database server
report processing
report rendering
To cancel a job that is running on the report server, we can cancel the job directly or reduce the report execution time-out value in the SQL Server Management Studio and then will stop query execution. Please refer to the steps below:
Open SQL Server Management Studio, and connect to "Reporting Services".
Under the Report Server node, right-click on the "Jobs" folder and select "Refresh". Then, right-click on "Jobs" again and click "Cancel All Jobs".
Right-click on the Report Server node and open the "Server Properties" dialog.
Click the "Execution" option, and set the "Limit report execution to the following number of seconds:" to a much smaller number. After this issue is resolved, this configuration should revert to the previous state.
Reference:
Managing a Running Process
Setting Time-out Values for Report and Shared Dataset Processing
In addition, we can also use the KILL Transact-SQL statement to terminate a normal connection by terminating the transactions that are associated with the specified session ID. For the details information, you can refer to:
KILL (Transact-SQL)
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
I've got a fast computer w/plenty of ram. I can watch videos from all other sources perfectly smooth, including Quicktime HD movie trailers.
When I try to watch a video in iTunes it slows my computer down so much that besides the videos stopping and starting, my mouse won't even move smoothly.
It worked fine until a couple of weeks ago.Phyllis-
One reason is that your internet connection is not fast enough to keep up with the video. You may find that when it gets to the end of the video and has fully downloaded, it will replay without stopping.
Fred -
Video playback stops and starts
I've never had this problem before but since I wiped my 5th Gen (late 2006) iPod Video and put new content on it the video playback keeps freezing for a second and then continuing. Most of the time the audio keeps going but sometimes they both stop and start again. It's very annoying. I don't see anyone else in this forum complaining about this. Am I the only one?
Anybody have any suggestions on how to fix this?
-LTWhat codec does your source footage use?
What codec is applied in Sequence > Settings?
Where are the source footage and render files located on your computer?
Version of FCS, Mac OS X and QuickTime? -
Jdbc sender adapter hangs and starts showing "Processing Started" forever
Dear ,
We are facing some issues with jdbc sender adapter channel on production system
Environment : XI 3.0 SP 20 + HP-UX 11.23 ia64 + Oracle 10.2
Sometimes it hangs and starts showing "Processing Started" forever on communication channel monitoring .
There is no error log for this.
If i stop it and then start it , no use.
If i copied this to a new one then it works.
I have found few SAP note like 1078420,1083488 , but my system is already at higher patch level.
Can you please advise me something as we are facing in production frequently.
Regards,
SandeepHi Sandeep,
This problem even we too faced in our project and thought of many stupid things finally found that the JDBC adapter is LOCKED.
Check in the Visual Admin >Cluster> "LOCKING ADAPTER"
we get a option of Display Locks .Check for an entry with
NAME : $XIDBAD.JDBC2XI
reset the locks and restart the CC ,now it works fine.
Note 1083488 - XI FTP/JDBC sender channel stop polling indefinitely(04/04S)
Thanks
Sudharshan
Maybe you are looking for
-
Wat is the use of "DATA var-name LIKE SY-INDEX" statement
Hi to all, is there any use of "DATA <var-name> LIKE SY-INDEX" statement in ABAP, do the variable <var-name> be changed with that of SY-INDEX when we declare like this. Could u give me a fast response,
-
My iPod 5th gen will not completely turn on it shows the apple symbol then shuts off I have restarted it and tried to plug it into my computer but cannot find it to restart it Its been like this for awhile and I can not fix it
-
iTunes 11 worked fine. This only occurred after downloading iTuens 12. I saw resolutions for Mac (deleting files), but how can this issue be resolved on Windows XP?
-
Log file size on ACS 5.3
Hi, how do i set limit on the log file size in ACS 5.3. I had the same issue with Nexus 1000v but there is a command that enables you to set log file nane and size. it is getting bulky. any advice? thanks Kerim
-
Random Error Notification - only lasts milliseconds
A message keeps popping up but only lasts milliseconds, not long enough to read what it says. I can only just catch a flash on the screen. Whenever it happens I open Console and always find the same thing "no information back from LS about running pr