Programatically displaying part of a report in an iframe

Hello,
I've followed the thread at:
http://www.forumtopics.com/busobj/viewtopic.php?t=61862&postdays=0&postorder=asc&highlight=reportpart&start=0
to add a graph from a report to an iframe. It works, but I had to manually open my .wid file to get the SID/BID and then hard coded it in my ASP.NET page. Since I'm getting the data from CrystalDecisions.Enterprise.InfoStore.InfoObject is there any way to get the SID/BID from somewhere in the object?
The only other alternative I can think of is to programmatically open the .wid file and get the SID/BID from inside there. I was pretty sure that when I was looking around at the CrystalDecisions.Enterprise.InfoStore.InfoObject object earlier that I saw the path to the .wid file stored somewhere in there, but I don't see it now. Can anyone tell me where I can programatically get the path to the .wid file?
Thanks,
Eric

Hello,
I've been able to open the .wid file in an xml format via the BusinessObjects.ReportEngine.IReport.GetXMLView. It shows me the values for the RID and the BID, but I don't see the actual name of the graph, which I can plainly see if I open the .wid file in the filestore.
I was going to try to do the GetView method instead, to see what I could see in the other formats. It appears to support Csv, Html, Xml, Pdf, Xls, etc. I can't get it to work, however. I get "Evaluation of expression or statement timed out."
Dim boIReport As IReport = boIDocumentInstance.Reports(0)                          'Declare the variable
boIReport.GetXmlView(XmlFilterType.GraphAsBinary)                                           'works fine.
boIReport.GetView(BusinessObjects.ReportEngine.OutputFormatType.Xml)   'gives me the timeout.
-Eric
Edited by: ewgoforth on Aug 31, 2010 10:46 PM

Similar Messages

Display Comments in Webi Report

Hi All,
We have a requirement, to display comments (2 or 3 paragraph in each page of report).The text needs to preserve the format (bold, bullets and colored text) i.e the format from the source data should be retained when displayed in the webi report.
Say for example the source is the excel and the text is coloured red or green , some part of the text is bold, all these formats should be preserved in the webi report also.
Can you please suggest, how to implemet this in webi report?
Thanks,
Sudha

you can take the formatted text in a word document, take a screen shot, put it in mspaint and select the required part. now place this picture in the blank cell's background image. this will preserve the formats of all kinds.
but u cant change the text dynamically.
usually we do this to give users an introduction page(tab1 in report followed by report tabs.) describing the application.
Thanks,
karthik

Displaying logo in alv report

hi,
what are the minimum requirements to display logo in alv report at the top of the page.
i searched forums but did n't get the required answer.

Hi
This code is to display logo in the report through alv grid
*& Report ZALVDEMO *
REPORT ZALVDEMO.
TABLES : J_1IEXCHDR, " header table
J_1IEXCDTL, " item table
J_1IPART2, " Excise Part II details
LFA1, " vendor master table
J_1IMOVEND, " vendor excise details table
MSEG, " Document Segment: Material
MKPF, " Header: Material Document
DD07T, " domain text table
T001W. " Plant and Branch Details
DATA : BEGIN OF IT_CHDR OCCURS 100,
DOCNO LIKE J_1IEXCHDR-DOCNO,
DOCYR LIKE J_1IEXCHDR-DOCYR,
EXNUM LIKE J_1IEXCHDR-EXNUM,
EXDAT LIKE J_1IEXCHDR-EXDAT,
WERKS LIKE J_1IEXCHDR-WERKS,
EXBED LIKE J_1IEXCHDR-EXBED,
EXCCD LIKE J_1IEXCHDR-EXCCD,
ECS LIKE J_1IEXCHDR-ECS,
END OF IT_CHDR.
DATA : BEGIN OF IT_CDTL OCCURS 100,
DOCYR LIKE J_1IEXCDTL-DOCYR,
DOCNO LIKE J_1IEXCDTL-DOCNO,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
LIFNR LIKE J_1IEXCDTL-LIFNR,
MATNR LIKE J_1IEXCDTL-MATNR,
MAKTX LIKE J_1IEXCDTL-MAKTX,
CHAPID LIKE J_1IEXCDTL-CHAPID,
EXBAS LIKE J_1IEXCDTL-EXBAS,
EXBED LIKE J_1IEXCDTL-EXBED,
ECS LIKE J_1IEXCDTL-ECS,
MENGE LIKE J_1IEXCDTL-MENGE,
MEINS LIKE J_1IEXCDTL-MEINS,
RDOC2 LIKE J_1IEXCDTL-RDOC2,
END OF IT_CDTL.
DATA TEXT(10).
DATA : BEGIN OF IT_OUT OCCURS 0,
SERIALNO LIKE J_1IPART2-SERIALNO,
TEXT1 LIKE TEXT,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
NAME LIKE LFA1-NAME1,
DDTEXT LIKE DD07T-DDTEXT,
EXCCD LIKE J_1IEXCHDR-EXCCD,
BUDAT LIKE MKPF-BUDAT,
EXBAS LIKE IT_CDTL-EXBAS,
EXBED LIKE IT_CDTL-EXBED,
ECS LIKE IT_CDTL-ECS,
MATNR LIKE IT_CDTL-MATNR,
MAKTX LIKE IT_CDTL-MAKTX,
CHAPID LIKE IT_CDTL-CHAPID,
MENGE LIKE IT_CDTL-MENGE,
MEINS LIKE IT_CDTL-MEINS,
DEL_IND(1),
END OF IT_OUT.
DATA IT_PART2 LIKE J_1IPART2 OCCURS 0 WITH HEADER LINE.
DATA S_NO(4) .
DATA DB_CNT LIKE SY-TABIX.
DATA EBELN_T LIKE MSEG-EBELN .
TYPE-POOLS : SLIS.
DATA : AFIELD TYPE SLIS_FIELDCAT_ALV.
DATA : LIST_HEADER TYPE SLIS_T_LISTHEADER,
FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
LS_FTCAT TYPE LVC_S_FCAT,
SORTCAT TYPE SLIS_T_SORTINFO_ALV,
SORTCAT_LN LIKE LINE OF SORTCAT,
G_REPID LIKE SY-REPID,
G_BACK_GROUND(70), "like bapibds01-objkey,
GS_VARIANT LIKE DISVARIANT,
G_SAVE ,
GT_EVENTS TYPE SLIS_T_EVENT,
ALV_EVENT TYPE SLIS_ALV_EVENT,
EVENTCAT TYPE SLIS_T_EVENT,
EVENTCAT_LN LIKE LINE OF EVENTCAT,
LAYOUT_IN TYPE SLIS_LAYOUT_ALV,
LAYOUT_IN1 TYPE SLIS_LAYOUT_ALV.
CONSTANTS : GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE
'TOP_OF_PAGE',
GC_FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE
'USER_COMMAND',
GC_FORMNAME_BEFORE_OUTPUT TYPE SLIS_FORMNAME VALUE
'BEFORE_OUTPUT'.
ALV_EVENT TYPE SLIS_ALV_EVENT,
DATA EX_NO LIKE IT_CHDR-EXNUM VALUE 0.
DATA REGTYP_1 LIKE J_1IPART2-REGTYP.
SELECTION-SCREEN BEGIN OF BLOCK B WITH FRAME.
PARAMETERS WERKS TYPE J_1IEXCHDR-WERKS.
SELECT-OPTIONS : BUDAT FOR J_1IEXCHDR-EXDAT.
PARAMETERS : R1 RADIOBUTTON GROUP GRP DEFAULT 'X',
R2 RADIOBUTTON GROUP GRP.
SELECTION-SCREEN END OF BLOCK B.
INITIALIZATION.
G_REPID = SY-REPID.
G_SAVE = 'A'.
PERFORM BUILD_EVENT USING GT_EVENTS[].
PERFORM ALV_EVENT_INIT.
AT SELECTION-SCREEN.
REFRESH LIST_HEADER.
PERFORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER.
START-OF-SELECTION.
PERFORM ALV_EVENT_INIT.
G_REPID = SY-REPID.
G_BACK_GROUND = ' ' .
IF R1 = 'X'.
CLEAR R2. CLEAR : REGTYP_1.
REGTYP_1 = 'A'.
set titlebar 'BALAJI' with DB_CNT.
ELSEIF R2 = 'X'.
CLEAR R1.CLEAR : REGTYP_1.
REGTYP_1 = 'C'.
set titlebar 'BALAJI1' with DB_CNT.
ENDIF.
SELECT * FROM J_1IPART2
INTO CORRESPONDING FIELDS OF TABLE IT_PART2
WHERE REGTYP = REGTYP_1 AND
TRNTYP = 'GRPO' AND
BUDAT IN BUDAT.
DOCYR = IT_CDTL-DOCYR AND
DOCNO = IT_CDTL-DOCNO.
LOOP AT IT_PART2.
SELECT SINGLE * FROM J_1IEXCHDR
INTO CORRESPONDING FIELDS OF IT_CHDR
WHERE TRNTYP = 'GRPO' AND
DOCYR = IT_PART2-DOCYR AND
DOCNO = IT_PART2-DOCNO AND
WERKS = WERKS AND
exdat IN BUDAT.
ORDER BY EXDAT.
IF SY-SUBRC = 0.
APPEND IT_CHDR.
ELSE.
CONTINUE.
ENDIF.
IF SY-SUBRC <> 0.
MESSAGE E084.
ENDIF.
ENDLOOP.
LOOP AT IT_CHDR.
SELECT * FROM J_1IEXCDTL
INTO CORRESPONDING FIELDS OF IT_CDTL
FOR ALL ENTRIES IN IT_CHDR
WHERE
TRNTYP = 'GRPO' AND
DOCNO = IT_CHDR-DOCNO AND
DOCYR = IT_CHDR-DOCYR AND
EXNUM = IT_CHDR-EXNUM AND
EXDAT = IT_CHDR-EXDAT AND
WERKS = IT_CHDR-WERKS.
IF SY-SUBRC = 0.
APPEND IT_CDTL.
ELSE.
CONTINUE.
ENDIF.
ENDSELECT.
ENDLOOP.
LOOP AT IT_CDTL.
CLEAR TEXT.
DB_CNT = DB_CNT + 1.
READ TABLE IT_CHDR WITH KEY EXNUM = IT_CDTL-EXNUM.
READ TABLE IT_PART2 WITH KEY DOCNO = IT_CDTL-DOCNO .
IT_OUT-SERIALNO = IT_PART2-SERIALNO.
SELECT SINGLE NAME1 FROM LFA1
INTO IT_OUT-NAME
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM LFA1
WHERE LIFNR = IT_CDTL-LIFNR.
IF LFA1-LAND1 EQ 'IN'.
TEXT = 'INVOICE'.
IT_OUT-TEXT1 = TEXT.
ELSE.
TEXT = 'BOE'.
IT_OUT-TEXT1 = TEXT.
ENDIF.
SELECT SINGLE * FROM J_1IMOVEND
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM DD07T
INTO IT_OUT-DDTEXT
WHERE DOMNAME = 'J_1IVTYP' AND
DDLANGUAGE = 'EN' AND
DOMVALUE_L = J_1IMOVEND-J_1IVTYP.
IF DD07T-DDTEXT = 'First Stage Dealer of indigenous excisable goods'
OR
DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisablegoods'.
DD07T-DDTEXT = 'Dealer'.
ENDIF.
IT_OUT-DDTEXT = DD07T-DDTEXT.
ELSEIF DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisable
*goods'.
DD07T-DDTEXT =
CLEAR EBELN_T.
SELECT SINGLE LFBNR FROM MSEG
INTO EBELN_T
WHERE MBLNR = IT_CDTL-RDOC2 .
SELECT SINGLE * FROM MSEG
WHERE BWART = '106' AND
LFBNR = EBELN_T ."and
ebeln = ebeln_t.
IF SY-SUBRC = 0.
IT_OUT-DEL_IND = 'X'.
ELSE.
IT_OUT-DEL_IND = ' '.
ENDIF.
SELECT SINGLE BUDAT FROM MKPF
INTO IT_OUT-BUDAT
WHERE MBLNR = EBELN_T ."MSEG-LFBNR.
IT_OUT-EXNUM = IT_CDTL-EXNUM.
IT_OUT-EXDAT = IT_CDTL-EXDAT.
IT_OUT-EXCCD = IT_CHDR-EXCCD.
IT_OUT-EXBAS = IT_CDTL-EXBAS.
IT_OUT-EXBED = IT_CDTL-EXBED.
IT_OUT-ECS = IT_CDTL-ECS.
IT_OUT-MATNR = IT_CDTL-MATNR.
IT_OUT-MAKTX = IT_CDTL-MAKTX.
IT_OUT-CHAPID = IT_CDTL-CHAPID.
IT_OUT-MENGE = IT_CDTL-MENGE.
IT_OUT-MEINS = IT_CDTL-MEINS.
APPEND IT_OUT.
EX_NO = IT_CDTL-EXNUM.
ENDLOOP.
Title Portion
IF REGTYP_1 = 'A'.
SET TITLEBAR 'BALAJI' WITH DB_CNT.
ELSEIF REGTYP_1 = 'C'.
SET TITLEBAR 'BALAJI1' WITH DB_CNT.
ENDIF.
AFIELD-COL_POS = 1.
AFIELD-FIELDNAME = 'SERIALNO'.
AFIELD-SELTEXT_L = 'INPUTS'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 2.
AFIELD-FIELDNAME = 'TEXT1'.
AFIELD-SELTEXT_L = 'TYPE OF DOC'.
AFIELD-JUST = 'L'.
AFIELD-DECIMALS_OUT = '0'.
AFIELD-NO_ZERO = 'X'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 3.
AFIELD-FIELDNAME = 'EXNUM'.
AFIELD-SELTEXT_L = 'DOC.NO'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 4.
AFIELD-FIELDNAME = 'EXDAT'.
AFIELD-SELTEXT_L = 'DOC.DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 5.
AFIELD-FIELDNAME = 'NAME'.
AFIELD-SELTEXT_L = 'NAME OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 6.
AFIELD-FIELDNAME = 'DDTEXT'.
AFIELD-SELTEXT_L = 'TYPE-OF-SUPPLIER'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 7.
AFIELD-FIELDNAME = 'EXCCD'.
AFIELD-SELTEXT_L = 'ECC OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 8.
AFIELD-FIELDNAME = 'BUDAT'.
AFIELD-SELTEXT_L = 'INPUT RECV DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 9.
AFIELD-FIELDNAME = 'EXBAS'.
AFIELD-SELTEXT_L = 'ASSESSABLE-VALUE'.
AFIELD-DO_SUM = 'X'.
AFIELD-JUST = 'R'.
AFIELD-DECIMALS_OUT = '2'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 10.
AFIELD-FIELDNAME = 'EXBED'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN CENVAT'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 11.
AFIELD-FIELDNAME = 'ECS'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN E-CESS'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 12.
AFIELD-FIELDNAME = 'MATNR'.
AFIELD-SELTEXT_L = 'MATERIAL-CODE'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 13.
AFIELD-FIELDNAME = 'MAKTX'.
AFIELD-SELTEXT_L = 'DESCRIPTION'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 14.
AFIELD-FIELDNAME = 'CHAPID'.
AFIELD-SELTEXT_L = 'TARIFF-ID'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 15.
AFIELD-FIELDNAME = 'MENGE'.
AFIELD-SELTEXT_L = 'QUANTITY'.
AFIELD-JUST = 'R'.
AFIELD-DO_SUM = ' '.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 16.
AFIELD-FIELDNAME = 'MEINS'.
AFIELD-SELTEXT_L = 'UOM'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 17.
AFIELD-FIELDNAME = 'DEL_IND'.
AFIELD-SELTEXT_L = 'Deleted'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
* LAYOUT FOR ZEBRA CATLOG
LAYOUT_IN-COLWIDTH_OPTIMIZE = 'X'.
LAYOUT_IN-ZEBRA = 'X'.
LAYOUT_IN-GET_SELINFOS = 'X'.
LAYOUT_IN-CONFIRMATION_PROMPT = 'X'.
LAYOUT_IN-DETAIL_POPUP = 'X' .
SORTCAT-decimals = '0'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_SAVE = G_SAVE
IS_VARIANT = GS_VARIANT
IT_FIELDCAT = FIELDCAT
IT_SORT = SORTCAT
IS_LAYOUT = LAYOUT_IN
IT_EVENTS = EVENTCAT
I_BACKGROUND_ID = g_back_ground
TABLES
T_OUTTAB = IT_OUT.
*& Form TOP_OF_PAGE_LIST_HEADER
text
-->LIST_HEADERtext
FORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER TYPE SLIS_T_LISTHEADER.
DATA : HLINE TYPE SLIS_LISTHEADER,
TEXT(60) TYPE C.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'ROOTS INDUSTRIES LTD' TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
SELECT SINGLE * FROM T001W WHERE WERKS = WERKS.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'PLANT :' TO TEXT.
WRITE WERKS TO TEXT+8.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-NAME1 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-STRAS TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-ORT01 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'DATE :' TO TEXT.
WRITE BUDAT-LOW TO TEXT+7.
IF BUDAT-HIGH NE ''.
WRITE 'TO' TO TEXT+18.
WRITE BUDAT-HIGH TO TEXT+22.
ENDIF.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
ENDFORM. "TOP_OF_PAGE_LIST_HEADER
*& Form ALV_EVENT_INIT
text
FORM ALV_EVENT_INIT .
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_PAGE.
ALV_EVENT-FORM = 'ALV_TOP_OF_PAGE'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_LIST.
ALV_EVENT-FORM = 'ALV_TOP_OF_LIST'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_LIST.
ALV_EVENT-FORM = 'ALV_END_OF_LIST'.
APPEND ALV_EVENT TO GT_EVENTS.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_PAGE.
ALV_EVENT-FORM = 'ALV_END_OF_PAGE'.
APPEND ALV_EVENT TO GT_EVENTS.
ENDFORM. "ALV_EVENT_INIT
*& Form ALV_TOP_OF_PAGE
text
FORM ALV_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = LIST_HEADER
I_LOGO = 'ENJOYSAP_LOGO'.
ENDFORM. "ALV_TOP_OF_PAGE
*& Form BUILD_EVENT
text
-->P_GT_EVENTS[] text
FORM BUILD_EVENT USING P_EVENTS TYPE SLIS_T_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = P_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_USER_COMMAND TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_BEFORE_LINE_OUTPUT INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_BEFORE_OUTPUT TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
ENDFORM. " BUILD_EVENT
this wud help u

How to modify the coding part of KE30 reports ?

How to modify the coding part of KE30 reports ,
so that I can be able to restrict report output based on sales office.
I am unable to find out the program name also.
Regards
Anubhav

>
Venkat Reddy wrote:
> Hi,
>
> If u want to know the program running for KE30 just go to SE93 and give KE30
> and click on display you can see the program running for KE30 will be SAPMKCEE.
> I think this is much simpler :-).
>
> Rather than change the standard report try to prepared your own that will be more
> comfortable since it will be complex task to achieve editing the standard program.
> Good Luck
>
> Regards
> VEnk@
>
> Edited by: Venkat Reddy on Dec 11, 2009 4:52 PM
Venkat,your answer is much simpler If the OP knows there is a tcode Se93, what if he/she does not know it??
P.S: Just a thought.
Regards.
Vishwa.

Garbage displayed while running the report in browser using report server

We are facing problem in displaying the Arabic text from the Report Server.
We have Digital Server running Tru64 4.0f unix. We have two similiar servers, both are
clustered. We have Report Server(6i) running in one machine and the Database(8.1.7) running
in the other.
When we tried the reports having only English text it is working fine. We need Arabic text
also in the report. The Arabic text are coming as ?????? . We tried setting the NLS_LANG
environment to AMERICAN_AMERICA.AR8MSWIN1256 and changed the Tk2Motif.rgb to take this
character set. Then we get the error REP 1352 - The font is not supported by the NLS_LANG.
Then we tried the various NLS_LANG environment AMERICAN_AMERICA.AR8ISO8859P6, ARABIC_SAUDI
ARABIA.AR8MSWIN1256 and ARABIC_SAUDI ARABIA.AR8ISO8859P6, in all the cases the report is
just hanging. If We unset the NLS_LANG and the Tk2Motif.rgb the english part of the reports
are coming alright, still the arabic is coming ??????.
null

hello,
where does it display the ???????s. it seems that the client, you are using to display the output does not have the right font-sets installed.
regards,
the oracle reports team

SharePoint - Web Part - SQL Server Reporting Services Report Viewer Error.

Hi,
I was just having a bit of a fiddle with the differen't web-parts available to add on our local SharePoint site, and as one of my tasks is to have a report automatically open when the page is opened i thought i would try to add the web-part 'SQL Server Reporting
Services Report Viewer' just to see the outcome.
Now, I don't much care about viewing the report at this time, but imediately after trying to add the web part i am being displayed with an error and no matter how much i navigate away from the page or close the browser the particular link to the page i was
trying to insert the web-part into now displays an error.
The error simply says 'An unexpsected error has occured' with various 'Correlation ID:' each time.
Now i have a link to other parts or subsites of that SharePoint site and they work just fine, it's just when i try to click on the page where i wanted to put the web-part in it
still comes up with an error. This page just so happens to be the home page so it really does need to be fixed.
Please help!?
Many Thanks,
Plain_Clueless

Hi again,
Sorry for the bother, We have now fixed the issue for the time being.. all that was needed was a simple '?contents=1' at the end of the url which takes you to a menu where you can delete the
necessary web-part that was causing the trouble.
As for actually implementing the report onto SharePoint.. in future i will make Dev pages instead.. and it seems i may need to contact the admin side of building so they configure 'SQL Reporting
Services Report Viewer' properly.
Thanks a lot though!
- A little less Plain_Clueless
Plain_Clueless

Number with more than 10 decimal places display as 0 in report

We have a number stored on a table as this long with several decimal values.
2440.159999999999854480847716331481933593
On one PC it display in a Crystal report as 0 and to another user it displays at the 2440. The report formats the display field with 0 decimal places.
Is there a max precision setting at the database level that is causing this?
It seems I can add an SQL express as follows:
Round ("ORDER_RELEASE"."TOTAL_WEIGHT", 2) to resolve the issue but cannot determine could be causing the differences in display among two different client PCs running the same report.

Hello,
CR was built using C++ and therefore the max number is 15 digits plus 1 for the sign of the number.
Cause could be different runtime of MS C++ but hard to say for sure. I any event the only work around is to use Store Procedure and break the field into 2 parts. The in CR add a text object and drop the fields into it next to each other. For doing any calculations on them you'll also have to do that in the SP or handle each field manually.
Thank you
Don

Displaying Date Parameters in Report Heading

Post Author: Jim-1003
CA Forum: Formula
Hello,
I am new to Crystal Reports, and I am trying to improve an existing report definition so that the beginning and end dates selected by the user are displayed as part of the report heading. I saw something similar in the report samples, but the sample uses custom functions that apply only to that report -- cdFormatDateRange and cdSpecialDateRange. I have not found any documentation on how those functions were created or how to use them. Any help you can give me would be greatly appreciated!
Thanks,
Jim

Post Author: Jim-1003
CA Forum: Formula
After some digging, I did find out more. First of all, in the options for my Parameter, the option to allow multiple entries was set to true, so I didn't really have a range, but an array of ranges, which confused the editor.
Second, I finally did find the source code for cdFormatDateRange, which allowed me to reuse it by copying it into the clipboard and pasting it into my report.

Possiblity to expand / narrow / reset all drillstroughable parts of the report with one button

Hi,
has anyone done that bevore? Is this possible ..
I have parts of a big Report, that are expanded (where i can see all detaildata) and parts where the detaildata is there, but arent showed by Standard (are narrowed).
I wish i could have a button, where i can expand / narrow all expandable/narrowable parts of the reports from 1 button.
Why?
1) To print the Report i could press "Expand all" and then print, so i get all the detials of the Report.
2) for a better first look i could Show all expandable reportparts narrowed. Then click expand all to see all Details.
and maybe to reset all expandable parts to the Default (Settings when loaded) there could be a reset button to.
Any Chance?
THX, greets pib

Hi Pe.bo,
Per my understanding that you want to add an button in the report to control the Expand All and Collapse All of the drill down report, right?
I have tested on my local environment and we can do this by creating an parameter to control the show/hide of the details, We can add two radio button image (Radio on, Radio Off)and add the "Go to Report"action on the image which
display most similar to the button and will display the result of Expand All and Collapse All once you click on the radio button.
Step by Step details information in below article for your reference to help you achieve the result:
http://blogs.interfacett.com/how-to-implement-expand-allcollapse-all-for-drill-down-in-sql-ssrs
If you still have any problem, please feel free to ask.
Regards
Vicky Liu

How to set the number of rows displayed in a classical report at runtime?

Hi,
Our customer has several standard client hardware configuration and would like to enable end users to choose their 'display profile' at login time. This 'display profile' would contain predefined values for these hardware configurations and supposed to set various paramters that should define the number of rows displayed in a classical report region.
I tried to provide parameters on the report region but it refused to accept anything but numerical values. Is it possible to do this?
Regards, Tamas

The link is to the closest linkable point in the documentation to the description of the Number of Rows (Item) attribute.
It sounds like you have been trying to enter—unsuccessfully—an item name or substitution string into the Number of Rows attribute. The Number of Rows (Item) attribute is the one that actually allows you to do this. Click on the flashlight icon beside it to get a list of items from the application.

Display issue in Bex Report

Hi all,
I have a requirment in my report where in i would not like to display the -ve values as negative in the columns. I do not have the option to use NODIM() at the query level, because i am simultaneously switching between the column displaying actual values as well as being input ready. How can we eliminate the -ve sign from the values being displayed, so that the report display just the absolute numbers.
Kindly help.

Hey
Create Calculate KeyFigure where (YOURKF<0)(YORKF*-1)+(YOURKF>0)(YORKF).
I think in this way your will get absolute value
Aharon

Conditional display in a SQL-Report/Report Region

Hi,
here I have an example for "Conditional display in a SQL-Report/Report Region". I figured it out in Firefox 3.6.2 using Firebug as development tool on Apex 3.2.1.00.12.
First you have to put the following javascript code in the Page HTML-Header:
<script type="text/javascript">

</script>
Maybe you have to modify the "vd_getBody" function. I'm searching the table cell with having the class "t10data". When you use another theme, there's maybe another class used.
Second is, that you set an static id for your report region. I prefer this structure:
R<app-id><page-id><seq> (Raaaaappppsss) e.g. R094260001010.
First example is to turn off the onMouse-Effect. Maybe on the first or last column definition you put this code in the "HTML-Expression" area:
<script>ex_conditional_tr('R094260001010', #ROWNUM#);</script>#ID#This will call the example function ex_conditional_tr with the parameter
a) the region id
b) the rownum (as oracle always starts with 1 this is the first data row [rownum=0 is the table header row])
Second example is the conditional formatting of a table cell. Put this in the HML-Expression area:
<script>ex_conditional_td('R094260001010', #ROWNUM#, #COLNUM#-1);</script>#ENAME#This will call the example function ex_conditional_tr with the parameter
a) the region id
b) the rownum
c) the cellnum (here we have to subtract 1 to get the "real" cell index)
The "ex_conditional" functions are just a representation of how to get the row or cell node.
Hope this help a bit.
Tom

I would use a CASE statement in the select....
each CASE would be an img src tag for a different button if the button is an image.
does that make sense? I can include an example if you would like...

How can we display the list of Report Names in Dashboard Prompt?

How can we display the list of Report Names in Dashboard Prompt?

Hi,
No its not possible to display list of reports in dashboard prompts.
Can do this using SQl results in prompt(we write query checking out report names manualy),but its not easy thing if you are having many report names to be displayed.
Assign points and close your threads if answered.
Refer : http://forums.oracle.com/forums/ann.jspa?annID=939
Regards,
Srikanth

ME2L : still to be delivered is not displayed correctly in ALV report

Dear All,
The still to be delivered and still to be invoiced quantity is not being displayed correctly in ME2L report. In BEST format the report displayes the correct values. In the ALV form the quantity is same as the ordered quantity.
can anyone he

If the selection is the same for BEST layout and ALV layout then the results should equal.
if a field in ALV display has a different value than in the old list display, then it pretty much looks like a bug, and bugs can only be erased by program changes from SAP via OSS notes.
Check SAPNet for notes, open a message yourself to SAP if you dont find any.

Stored Procedure for displaying data in Crystal Reports

Hi I am new to Oracle & Crystal Reports,so can any one please give me sample stored procedure to display data in Crystal report from Oracle by passing rwo input values.

from site:-
Crystal Reports will only support the return of a single refcursor from Oracle. Even the latest and greatest version 10 doesn't allow you to return more than one recordset at a time. You could add one more step to your procedure that would join up the output of the multiple refcursors into a PL/SQL table and then fetch the result set out through a single refcursor. That way you are using temporary space that will be cleaned up as soon as the connection is terminated and will only be returning a single refcursor

Programatically displaying part of a report in an iframe

Similar Messages

Maybe you are looking for