Programe not working in background

der alll expert i have a Z programme which update Z table . This is working fine in foreground but when i Scheduled it as background job it is not updating the table? programme does't have any selection screen. Plz give any idea.
Avadhesh Chandra
Moderator message: too vague, help not possible, try analysing problems yourself before asking, describe problems in all technical detail when posting again
Edited by: Thomas Zloch on Jan 7, 2011 10:49 AM

Hi,
the Job Finished ok? look in sm37 tx
try debug in background setting a code like this
data exit type c.
while exit <> 'X'.
endwhile.
then go to tx sm50 and debug.
and look if goes well.
Regards,

Similar Messages

Program not working ib background

Moderator message: background/foreground/GUI problems = FAQ, please search before posting.
Hi All,
I have a program which is not working in background.It actuly takes the file and using GUI_upload i upload it into ITAb and then modify the database table based on this. But when i process this in foreground it working and updating the table.But when i scedule in background the job is getting over in 1-2 sec and not updating the table.
Please help me. below is the code for your refrence:
data:begin of i_tab occurs 0,
      Bp1 like DATAbase table,
      Bp2 like database table,
     trf1 type string,
     trf2 type string,
     status type string,
end of i_tab.
data: BP_ver type STANDARD TABLE OF DATAbase table      with header line ,
      w_ver type ZVERS_BUT050_CUR .
DATA: it_tab type filetable,
    gd_subrc TYPE i,
    file_name TYPE string,
    path TYPE string.
DATA : lw_file TYPE file_table.
DATA: LIN TYPE I.
*Input File
SELECTION-SCREEN begin of block blk with frame title text-100.
SELECTION-SCREEN SKIP 2.
parameters : p_file like rlgrap-filename .
SELECTION-SCREEN end of block blk.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR: file_name.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title     = 'Select only Text File'
      default_filename = '*.txt'
      multiselection   = ' '
    CHANGING
      file_table       = it_tab
      rc               = gd_subrc.
READ TABLE it_tab INTO lw_file INDEX 1.
file_name = lw_file.
p_file = file_name.
START-OF-SELECTION.
*Upload the file
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = FILE_NAME
     FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
    TABLES
      DATA_TAB                    = i_tab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at i_tab.
    if i_tab-status = 'Yes'.
      i_tab-status = 'V'.
    else.
      i_tab-status = 'I'.
    endif.
    modify i_tab.
endloop.
if i_tab is not INITIAL.
    select * from DATAbase table into CORRESPONDING FIELDS OF TABLE BP_ver FOR ALL ENTRIES IN i_tab
      where PARTNER1 = i_tab-Bp1 and PARTNER2 = i_tab-bp2 .
endif.
*Update the table
loop at BP_ver .
    clear i_tab.
    read TABLE i_tab with key bp1 = BP_ver-PARTNER1 bp2 = BP_ver-PARTNER2 .
   if i_tab-bp1 = w_ver-PARTNER1 and i_tab-bp2 = w_ver-PARTNER2.
    BP_ver-PARTNER1 = i_tab-bp1 .
    BP_ver-PARTNER2 = i_tab-bp2 .
    BP_ver-Z_CURRENTLY_VALI = i_tab-status .
    modify BP_ver TRANSPORTING Z_CURRENTLY_VALI .
   endif.
endloop.
update DATAbase table from table bp_ver[] .
if sy-SUBRC eq 0.
    commit work.
    message 'Table DATAbase table Updated Sucsussfully' type 'S'.
else.
    message 'Table Not Updated !!! Check the file data or input' type 'S'.
endif.
Edited by: Thomas Zloch on Nov 12, 2010 11:03 AM

Hi,
     Look at the coding in FM GUI_UPLOAD ... This does not work in background ....
Batch mode is not supported
IF sy-batch = 'X'.
    MESSAGE ID 'FES' TYPE 'E' NUMBER '002' RAISING NO_BATCH.
ENDIF.
Regards,
Srini.

Program not working in background

Hello,
I have a Z program that uses open dataset stmts that writes the file out into a specified directory in the appl server path.
The prgram runs fine in foreground. But when scheduled in background it fails.
The job logs are :
Dierctory does not exist
Job cancelled after system exception ERROR_MESSAGE
The destination path can read, write and edit files in the directory.
i tried to create .txt file & also without any extension.
Can someone suggest me what i am doing wrong.
Thanks
Ricky

Hi,
Has anyone got any solution to this problem. I'm able to create forlder and write some files using ABAP program in foreground process and also in background with JDBG but the same doesnt happen when run in backgroud.
The user id used to run the program has SAP ALL access so doesnt seem to be an authorisation issue.
I'm using function module TMP_GUI_CREATE_DIRECTORY to create folder and
GUI_DOWNLOAD to write files in designated folders. The program doesnt have any BDC
Help would be appreciated.
Regards,

BDC is not working in background for Transaction COR6N

Hi ,
   We have written the BDC program for transaction COR6N. BDC works perfectly in foreground but it's not working for background option.
    SELECT SINGLE AUFPL INTO W_AUFPL FROM AFKO
              WHERE AUFNR = W_AUFNR.
    SELECT AUFPL VORNR INTO TABLE IT_PHASE FROM AFVC
            WHERE AUFPL = W_AUFPL
              AND PHFLG = 'X'.
    LOOP AT IT_PHASE.
    WA_BDCDATA-PROGRAM = 'SAPLCORU_S'.
    WA_BDCDATA-DYNPRO   = '0100'.
    WA_BDCDATA-DYNBEGIN = 'X'.
    APPEND WA_BDCDATA TO BDCDATA.
    CLEAR WA_BDCDATA.
    WA_BDCDATA-FNAM     = 'AFRUD-AUFNR'.
    WA_BDCDATA-FVAL     = W_AUFNR.
    APPEND WA_BDCDATA TO BDCDATA.
    CLEAR WA_BDCDATA.
    WA_BDCDATA-FNAM     = 'AFRUD-VORNR'.
    WA_BDCDATA-FVAL     = IT_PHASE-VORNR.
    APPEND WA_BDCDATA TO BDCDATA.
    CLEAR WA_BDCDATA.
    WA_BDCDATA-FNAM     = 'BDC_OKCODE'.
    WA_BDCDATA-FVAL     = '/00'.
    APPEND WA_BDCDATA TO BDCDATA.
    CLEAR WA_BDCDATA.
    WA_BDCDATA-PROGRAM = 'SAPLCORU_S'.
    WA_BDCDATA-DYNPRO   = '0100'.
    WA_BDCDATA-DYNBEGIN = 'X'.
    APPEND WA_BDCDATA TO BDCDATA.
    CLEAR WA_BDCDATA.
    WA_BDCDATA-FNAM     = 'AFRUD-LMNGA'.
    WA_BDCDATA-FVAL     = w_qty. "'60'.
    APPEND WA_BDCDATA TO BDCDATA.
   CLEAR WA_BDCDATA.
   WA_BDCDATA-FNAM     = 'AFRUD-BUDAT'.
   WA_BDCDATA-FVAL     = w_date. "'31.12.2008'.
   APPEND WA_BDCDATA TO BDCDATA.
    CLEAR WA_BDCDATA.
    WA_BDCDATA-FNAM     = 'BDC_OKCODE'.
    WA_BDCDATA-FVAL     = '=BU'.
    APPEND WA_BDCDATA TO BDCDATA.
    clear X_OPTIONS.
    X_OPTIONS-DISMODE = 'N'. ' works perfectly for 'A'
    X_OPTIONS-UPDMODE = 'S'.
    X_OPTIONS-CATTMODE = ' '.
    X_OPTIONS-DEFSIZE = ' '.
    X_OPTIONS-RACOMMIT = ' '.
    X_OPTIONS-NOBINPT = 'X'.
    X_OPTIONS-NOBIEND = ' '.
    CALL TRANSACTION 'COR6N' USING BDCDATA OPTIONS FROM X_OPTIONS
                       MESSAGES INTO ITAB.
                 MODE 'N' MESSAGES INTO ITAB UPDATE 'S'.
   WAIT UP TO 3 SECONDS.
    COMMIT WORK AND WAIT.
    CLEAR:BDCDATA[],WA_BDCDATA.

HI,
COR6N is the Enjoy Transaction and sap does not suggest to write the BDC on these transaction as most of these transaction uses the GUI elements foe better display and which cannot be recorded while processing the BDC in back ground.
Check for the Normal transaction and write the BDC for it.
Or
Pass X to Rcommit flag in the CTU_PARAMS option and check.

SUBMIT does not work in background...

Hi guys,
We have a copy program of a standard transaction and once we use this copy program in the main program via SUBMIT... it does not work in background...
Why is this so,,, Please advice...
THanks!

Hi,
When executing some program using the statement like SUBMIT prog_2 WITH parameters and RETURN.
In foreground PROG_2 is executed, and once you click on the BACK button the code written after this SUBMIT statement will be executed.
If you are executing the same in the BACKGROUND mode, no feasibility of clicking on BACK button, hence control will remain in the PROG_2 only after executing its logic.
Please code accordingly.

Open dataset is not working in background in PRD

Dear All,
Open dataset is not working in background in PRD .
OPEN DATASET filepath FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
Whike running in foregroundits working dev as well as prd.
but when i am running in background its giving error like file not found .
but al11 is working (i mean my file path is working ).
Thanks N Regards,
Srinivasa Reddy

your authority team shall check the batch user of that abap!
Could you please tell us the detailed error message?
grx
Andreas

BADI implementation is not working in background for MRRL

Hai frnds,
BADI: MRM_WT_SPLIT_UPDATE is used for deducting withholding tax in MRRL(Invoice verification). This BADI was implemented and working fine in foreground, but not working in background.
After implementing the BADI, the standard method of calculating TDS(from vendor master) is over written by BADI implementation.Now standard deduction is also not workijng in background.Plz help me to solve it.
Bala.V

HI,
COR6N is the Enjoy Transaction and sap does not suggest to write the BDC on these transaction as most of these transaction uses the GUI elements foe better display and which cannot be recorded while processing the BDC in back ground.
Check for the Normal transaction and write the BDC for it.
Or
Pass X to Rcommit flag in the CTU_PARAMS option and check.

In c200 chat is not working on background like 273...

In 2730 c i will get sound alart when i get a im i will be 24hours online Chat is not working in background in c200 like 2730 c so i cant use im all time how to make it work like 2730 c in my c200 both are s40 no

Dude, make sure u are on a 3G network to ensure clarity, then also, install skype so that you can get some of those neccessary files/apps to carry out voice stuffs...

Submit and return exporting list to memory is not working in background

Hi gurus,
i am using submit statement and exporting list to memory. it works fine in foreground and i am able to get the output. but in case of background , it is not exporting the list.PLease help me on this.
Thanks and regards,
Rajeshwar

Hello Rajeshwar,
This is a duplicate thread. You have a thread with the same question.
[list_to_memory is not working in background;
Jayant Sahu

Gui_download Function module is not working in Background Scheduling

Hi Experts,
Function modules like GUI_DOWNLOAD are not working in background scheduled jobs, It is raising an exception. Though it is working fine in foreground execution.
Please provide me solution for this challenging task.
you could be rated well for this question.
Thanks,
Rama Krishna.

Hello,
work with open dataset and close dataset...
just loop over itab and transfer itab field for field into a string field separated by ;
Here is an extract of coding:
OPEN DATASET p_dath FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP AT itab_pos.
    CLEAR satz.
    MOVE itab_pos-vbeln TO satz-vbeln.
    MOVE ';' TO satz-fill1.
    MOVE itab_pos-kunnr TO satz-kunnr.
    MOVE ';' TO satz-fill2.
    MOVE itab_pos-ktgrd TO satz-ktgrd.
    MOVE ';' TO satz-fill3.
    MOVE itab_pos-fkdat TO satz-fkdat.
    MOVE ';' TO satz-fill4.
    MOVE itab_pos-budat TO satz-budat.
    MOVE ';' TO satz-fill5.
    MOVE itab_pos-cpudt TO satz-cpudt.
    MOVE ';' TO satz-fill6.
    MOVE itab_pos-fkimg TO satz-fkimg.
    MOVE ';' TO satz-fill7.
    MOVE itab_pos-netwr TO satz-netwr.
    MOVE ';' TO satz-fill8.
    MOVE itab_pos-vrkme TO satz-vrkme.
    MOVE ';' TO satz-fill9.
    MOVE itab_pos-ktgrm TO satz-ktgrm.
    MOVE ';' TO satz-fill10.
    MOVE itab_pos-matnr TO satz-matnr.
    MOVE ';' TO satz-fill11.
    MOVE itab_pos-mattxt TO satz-mattxt.
    MOVE ';' TO satz-fill12.
    MOVE itab_pos-gewei TO satz-gewei.
    MOVE ';' TO satz-fill13.
    MOVE itab_pos-brgew TO satz-brgew.
    TRANSFER satz TO p_dath.
ENDLOOP.
CLOSE DATASET p_dath.
It is not so comfortable as it is with GUI_DOWNLOAD but it works in background!

GUI_DOWNLOAD does not work for background printing

Hi,
Need some help urgently.
Function moduel GUI_DOWNLOAD does not work for background printing. I want to know how this issue can be handled or we have to use some other function module.
We are using this in a report and i get the error dump OBJECTS_OBJREF_NOT_ASSIGNED when we run this report in background.
Kindly suggest.
Best Regards,
Abbasi

you can not use gui_download in background.
Try searching first, this thing has been posted a thousand times already

Workflow not working in Background Processing

Hi All,
I am relatively new to Workflow. Currently, I am creating Deliveries (preferably in background) once a Sales Order is created. I am using an ABAP Class as the object method to submit the sales order number to the delivery processing method (which just submits basic information to standard SAP transaction VL04). I found that if the execution of the delivery creation task is not in Background Processing (the user manually kicks off the Delivery creation in SBWP) the workflow works as expected and creates the deliveries. However, if the Background Processing is checked, the workflow does not process and does not create a delivery. Is there any specific reason as to why the workflow will not work in background?
Any help you can give would be greatly appreciated. Thanks.
John

Hi,
John
See to process a Back ground task, there should be a proper parameter flow.
Please look at the import parameters in the method you are using to process the back ground task..
If proper import parameters are passed then the task will work
This should help..
Thanks,
Shanky

'Program not working' - panorama

When I attempt to create a panorama using Photoshop Elements 9 on my recently purchased Windows 8.1 pc I get a message saying 'Program not Working' and I have to close the editor. This function was ok on my old Windows XP pc. Can anyone help?

First, quit the editor, then restart it while holding down ctrl+alt+shift. Keep the keys down till you see a window asking if you want to delete the settings file. You do. Note that if you have set the welcome screen to automatically open the editor, it won't work from that shortcut. Use the actual .exe/application file or the buttons in the organizer or on the welcome screen.

My adobe is not working with Windows 7 it says "program not working"

My adobe does not worked with I have tried 9 & 10 both versions. It does not seem to work with Windows 7.

Adobe Reader X works very well on Windows 7.
Please give us the exact error message you're getting; "program not working" is not a message that Windows or Adobe Reader would issue.

Program making a RFC call to Function Module not working in background

Hi All,
I have an ABAP Program which is used to do a reconciliation check between the R/3 and BI system for Invoice Data. Please find below the details of the program flow:
1.     Program counts the number of records in the DSO table and aggregates the Net_Value based on the date range (passed as parameters)
2.     Program calls a Function Module (RFC Call) which counts the number of records in the R/3 table and aggregates the Net_Value for the same date range
3.     Function Module Passes back the count values and aggregated Net_Value to the program
4.     Program compares the count and aggregated Net_Value from EDWH and MSP systems and sends an email mentioning whether the counts match or not
However we are facing an issue.
Whenever, we execute the program in dialog mode, it works fine and fetches results within 5-6 minutes. However if we schedule the program to run in background (parameters through a variant), it gives no results even after running for over 3-4 hours. We tried figuring it out yesterday but could not come to any conclusion. Since there is a RFC call being to the function module, we were wondering if we need to specify some other parameter as well.
Thanks & Regards
Dharmendra

RFC Call is a procedure for executing remote enables function modules. It is done via the 'Remote Enabled' radio button on the function module's attribute screen.

Programe not working in background

Similar Messages

Maybe you are looking for