Programmatically setting text justification in a table

I am looking for a method to programmatically set text justification in a table. As far as I can tell the attribute is not available at run time. Has anyone had any experience with this? Thanks.

Of course you could make several identical tables on top of each other, but with different font alignment, then make the desired one visible . It's ugly but will work just fine.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

How do I programmatically set chart history length?

How do I programmatically set chart history length?

Hi, u could try instead of using a chart, u could use an xy graph with a chart buffer and with the chart buffer defining the length/amount points needed. And this also mimics what happens in a chart.
Stuart
Attachments:
XY_Chart_Buffer.vi ‏54 KB

Programmatically setting report options.

Is there a way, either through the TestStand engine interfaces or through writing property variables, to set the TestStand Report options? Specifically I'd like to affect the 'Disable Report Generation' option, and the 'Report Format' option.
Thanks,
Aaron Stibich

Aaron,
From your sequence file, you can add a callback sequence called ReportOptions. To add it, go to Edit->"Sequence File Callbacks..." and select ReportOptions (with type Callback Type "Model Callback") and click Add. Now you will have a ReportOptions sequence in your sequence file that the process model calls after reading the default report options. If you want to modify, say, the "Report Format" option, then add a statement step to this sequence with a version of the following statement:
Parameters.ReportOptions.Format = "txt"
From within this special sequence you can modify the report options as you like. If you want to change them for all of your sequence files, then you can modify the appropriate process model sequences.
--Peter

Programmatically set the default of a control

Hi, I am working on an application where in one part of the program the user can apply a waveform, then in a different subvi is this waveform is applied/not applied the default value of a certain control will be either digital trigger or no trigger.
In short I want to know how I can set the default of a control based on the t/f of a boolean control. I have attached a vi where I set the value, but in this vi, the value is permanent, I want to set the default but still allow the user to change the value if so desired. Any help would be greatly appreciated.
Attachments:
Programatically set value of control.vi ‏9 KB

In short I want to know how I can set the default of a control based on the t/f of a boolean control. I have attached a vi where I set the value, but in this vi, the value is permanent, I want to set the default but still allow the user to change the value if so desired. Any help would be greatly appreciated.
DEFAULT values cannot be set at run time period- the default value is contained in the compiled code so changing a default value forces a re-compile obviously something that the Run Time Engine can't handle. It is possible to load values from a file and apply those values to the control. You can even make a decision at run time what value to load based on your boolean.
Look through the help for the configuration file operation palatte you'll get some ideas.
Jeff

Programmatically set NI DAQ physical channels

If I read channel assignment from a configuration file (e.g. 9205 AI0:AI1), how can I create DAQ tasks using corresponding physical channels in labview?
Solved!
Go to Solution.

see attached for a simpler attempt
Randall Pursley
Attachments:
Select Channels.vi ‏14 KB

Is it possible to set text and rotatation in stored table formats?

I have a table that is a good candidate to be a table format because it will be resued many times. The heading text will not change and some of the text is rotated, so I'd like to store that too. Is there a way to do this in FM9? Here's a sample of what I'm aiming for. Any portion (text itself or rotation style) that can be set in the table format tag would be helpful.
Thanks,
Dave

I'm reasobably sure that table formats can't have any text in them. Tables with formatting and canned text are one of the things I use most frequently in my Auto-Text definitions. Auto-Text is a plug-in I wrote that is useful for inserting canned items into FrameMaker documents. You can learn about it here:
http://www.siliconprairiesoftware.com
Steve

Since updating to mavericks i can't open ical or text edit

since updating to mavericks i can't open ical or text edit.
do i really have to reinstall, will take me 20 hours athome

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Set Text of Container to HTML not working

I have a div tag named "theAnswer" on a page. When the user
clicks the "Submit" button, I want some text to appear inside the
div that has HTML formatting.
The HTML code for the text I want to appear is below:
You are correct! We are committed to conducting
business with
the highest degree of integrity, complying with legal
standards and
regulations and serving others with respect, fairness and
caring.  Click here for <a
href="javascript:;"
onClick="MM_openBrWindow('../docs/
Ethics_Standard_1.pdf','','scrollbars=yes,resizable=yes,width=790,height=575')">More
Info</a> or click Continue.
After I put in the Behavior to "Set Text > Set Text of
Container to", choose the correct Div tag, and paste the above into
the "New HTML" field, when I click the Submit button, I get the
following appearing in the div "theAnswer" exactly how it appears
below as text without it being actual formatted HTML.
You are correct! We are committed to conducting
business with
the highest degree of integrity, complying with legal
standards and
regulations and serving others with respect, fairness and
caring.  Click here for <a
href="javascript:;"
onClick="MM_openBrWindow('../docs/
Ethics_Standard_1.pdf','','scrollbars=yes,resizable=yes,width=790,height=575')">More
Info</a> or click Continue.
It's not formatted as HTML, it just comes out exactly what
the coding is. Why?!

Let's see the page, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Jim Rehmann" <[email protected]> wrote in
message
news:g6a3in$dv4$[email protected]..
>I have a div tag named "theAnswer" on a page. When the
user clicks the
> "Submit" button, I want some text to appear inside the
div that has HTML
> formatting.
>
> The HTML code for the text I want to appear is below:
>
> You are correct! We are committed to
conducting business with
> the highest degree of integrity, complying with legal
standards and
> regulations and serving others with respect, fairness
and
> caring.  Click here for <a
href="javascript:;"
> onClick="MM_openBrWindow('../docs/
>
>
Ethics_Standard_1.pdf','','scrollbars=yes,resizable=yes,width=790,height=57?5')"
>>More
> Info</a> or click Continue.
>
>
> After I put in the Behavior to "Set Text > Set Text
of Container to",
> choose
> the correct Div tag, and paste the above into the "New
HTML" field, when I
> click the Submit button, I get the following appearing
in the div
> "theAnswer"
> exactly how it appears below as text without it being
actual formatted
> HTML.
>
>
> You are correct! We are committed to
conducting business with
> the highest degree of integrity, complying with legal
standards and
> regulations and serving others with respect, fairness
and
> caring.  Click here for <a
href="javascript:;"
> onClick="MM_openBrWindow('../docs/
>
>
Ethics_Standard_1.pdf','','scrollbars=yes,resizable=yes,width=790,height=57?5')"
>>More
> Info</a> or click Continue.
>
> It's not formatted as HTML, it just comes out exactly
what the coding is.
> Why?!
>
>

Getting error while trying to set text for form value field in oaf

Hi ALL,
When i am trying to set text for a form value type field it is giving null pointer exception, please help me out.
I tried below way.
OAFormValueBean containlineid=(OAFormValueBean)webBean.findChildRecursive("item11");
            containlineid.setText(pageContext,"test");
Thanks

HI Keerthi,
I am able to set and get the value now, i am able to see the data in my log window, but in my page it is erroring out, giving null pointer exception.
after commenting the two lines setting and getting value page is running fine, so any clue on this, please check the below code.
public class XXDPECONTAINLINESCO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
        VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
   * Layout and page setup logic for a region.
   * @param pageContext the current OA page context
   * @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processRequest(pageContext, webBean);
    OAApplicationModule am = (OAApplicationModule) pageContext.getApplicationModule(webBean);
      OARawTextBean startDIVTagRawBean =
      (OARawTextBean) webBean.findChildRecursive("DivStart");
      System.out.println("debhorizontal"+ startDIVTagRawBean);
// addScrollBarsToTable(pageContext, webBean,"DivStart", "DivEnd", true , "400",true,"400");
   * Procedure to handle form submissions for form elements in
   * a region.
   * @param pageContext the current OA page context
   * @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processFormRequest(pageContext, webBean);
     String preplenish = pageContext.getParameter("item1");
      String pworkorder = pageContext.getParameter("item2");
      String pdmr = pageContext.getParameter("item4");
      String punloading = pageContext.getParameter("item6");
      String prrnum=pageContext.getParameter("item16");
      String pworknum=pageContext.getParameter("item14");
      String pdtr=pageContext.getParameter("item13");
      Serializable param[] = {preplenish,pworkorder,pdmr,punloading,prrnum,pworknum,pdtr};
      OAApplicationModule am = (OAApplicationModule) pageContext.getApplicationModule(webBean);
      if(pageContext.getParameter("item11")!=null)
        if(am !=null)
          am.invokeMethod("getSearchData",param);
      if (pageContext.getParameter("item30") != null) {
        String recout = (String)am.invokeMethod("getSelectedData");
           System.out.println("deb multi select test"+recout);
            System.out.println("1111test1"+pageContext.getParameter("item32"));
            OAFormValueBean containlineid=(OAFormValueBean)webBean.findChildRecursive("item32");
            System.out.println("1111test2"+pageContext.getParameter("item32"));
            //containlineid.setValue(pageContext,recout);
            System.out.println("1111"+pageContext.getParameter("item32"));
          /// System.out.println("22222"+containlineid.getValue(pageContext));
        containlineid.setValue(pageContext,recout);
        containlineid.getValue(pageContext);
           System.out.println("1111test3"+pageContext.getParameter("item32"));
--------------Error it is giving in the page as----------------
Exception Details.
oracle.apps.fnd.framework.OAException: java.lang.NullPointerException at oracle.apps.fnd.framework.OAException.wrapperException(Unknown Source) at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(Unknown Source) at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(Unknown Source) at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source) at _OA._jspService(_OA.java:71) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453) at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239) at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34) at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595) ## Detail 0 ## java.lang.NullPointerException at xxdpe.oracle.apps.ak.xxdpecontain.webui.XXDPECONTAINLINESCO.processFormRequest(XXDPECONTAINLINESCO.java:123) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source) at oracle.apps.fnd.framework.webui.beans.layout.OAMessageComponentLayoutBean.processFormRequest(Unknown Source
Thnaks

How do I GET the 'set text of container' behavior in DW CS3 if it's missing?

I'm building a site using CSS in DW CS3 (bought in May 2006) that has some photo gallery pages where a large image changes per thumbnails to its right that are clicked. The thumbnails are in their divs and the wished-for big image should appear in a larger div to the left. I've read in other postings here that I can use Behaviors panel > Set Text > Set text to container to do this, but this behavior is missing in my Set Text submenu. How do I add this behavior there?
Also, how do I not only create this 'on click' behavior, but have the thumbnail image change to a 'HIT' state like a rollover would?
(P.S. - posted this yesterday, slightly different heading, but it didn't appear today)
Thanks for your help --

Check this location in windows C:\Program Files\Adobe\Adobe Dreamweaver CS5\configuration\Behaviors\Actions\Set Text
If this Set Text folder is not there it means that the behavior did not get installed. So you might need to reinstall DW CS3.

Set text of container in DW CS3

I'm building a site using CSS in DW CS3 (bought in May 2006) that has some photo gallery pages where a large image changes per thumbnails to its right that are clicked. The thumbnails are in their divs and the wished-for big image should appear in a larger div to the left. I've read in other postings here that I can use Behaviors panel > Set Text > Set text to container to do this, but this behavior doesn't appear in my Set Text submenu. How do I add this behavior there?
Also, how do I not only create this 'on click' behavior, but have the thumbnail image change to a 'HIT' state like a rollover would?
Thanks for your help --

Check this location in windows C:\Program Files\Adobe\Adobe Dreamweaver CS5\configuration\Behaviors\Actions\Set Text
If this Set Text folder is not there it means that the behavior did not get installed. So you might need to reinstall DW CS3.

How to set text in a TextArea

I have tried to find ways around this, but i must set text into a panel. but there is no .setText(), like there is for text fields. So how would i set text into a TextArea?
BTW: what i am trying to do is be able to constatly add things without replacing what has been put up there.
thank you

BigDaddyLoveHandles wrote:
sys5 wrote:
I have tried to find ways around this, but i must set text into a panel. but there is no .setText(), like there is for text fields. So how would i set text into a TextArea?
BTW: what i am trying to do is be able to constatly add things without replacing what has been put up there.
thank youCould it be that you are not aware of the documentation?
http://java.sun.com/javase/6/docs/api/
By the way, JTextArea does have a setText method, but it replaces the current text with the given text. It sounds like you want to use ---- but wait, it's better if you find that out yourself. Big hint: it's the first method listed on JTextArea's API page.
edit: too late!If he wasn't aware of the documentation, he probably would have tried using setText(), and found that it worked. That he thought it didn't exist suggests that he looked at the API but only looked in the method summary area, and not below at the "methods inherited from..." sections.
(sorry to ruin your surprise)

Need help with Set Text behavior

In Dreamweaver CS3/Mac, I am creating a disjointed rollover
that is initiated by rolling over an image. I need it to swap two
images and hopefully set text in two divs. I want this to happen on
rollover and not on click. I don't want it to restore on mouse out.
The images are no problem but I can't seem to make this happen for
the text. Is this possible? Any help? Thanks.

http://murraytestsite.com/carneros.html
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"LB:Monroe" <[email protected]> wrote in
message
news:fsp2da$l1$[email protected]..
> Thanks for your response. You can view the page under
construction at:
>
http://www.monroest.com/tlcd/
>
> As one rolls over a square (image file) in the top bar,
the following is
> to
> occur:
> the large image swaps (simple swap image)
> the caption text changes (text, not an image)
> the text to the right of the image changes (text, not an
image)
> the background color of the text div (currently light
gray) changes
> (property
> change?)
> on some of them, the text color of the long text block
changes (property
> change?)
http://www.monroest.com/tlcd
>

I have set text size to Auto but it starts too small

I have created a form in Acrobat Pro 9, and set text size to Auto in all fields.
I know it is limited to the height of the field, but one of the fields is a block for multi-line paragraghs. Size is set to Auto, font to Times Roman. When I open the file in Reader to test it, it looks like it's starting at 12 points. It goes down from there as the whole block is filled with text, but I'd like it to start at around 18.
Advice?

as I mentioned, this one field is a block for multi-line paragraghs. It's one, large text block, taking up the bottom half of the form, so that users can input multiple paragraphs of text (they're telling their story). Some people will write a lot, some less. That's why I set it to Auto, so that the shorter stories would be in larger text, but longer stories will still shrink to fit.
It works, but I want to know if their is a way to get the text to start out at a larger font size before auto-sizing-to-fit. I mean, Something is telling the font to start at 12 point...
Should I attach the form to this discussion? (How do I do that?)

Work with JTable cell (check input, set text color)

I have a JTable with data
The task is:
User inputs some data into cell
I want to check his input string for equatily with other values in column
For example, I have these values in column:
1.example
2.exercise
3.execute
User inputs word "execution" in the same column
until user inputs "executi" his input string should be red.
What event I have to listen to if I want to get user input string?
Also a question:
Is there any opportunity to work with cell row (copy it to another JTable) ?
Message was edited by:
Holod

i think you should use cell editor as textfield (although that is default for jtable) and then implements document listener and set text color in insert update method.
try this out :-)

Programmat​ically setting text justificat​ion in a table

Similar Messages

Maybe you are looking for

Programmatically setting text justification in a table