Programmatically Reporting Volume Tier Usage

The gridview at  "Compellent Enterprise Manager > Storage > Storage Types > Assigned Redundant > Volumes"
displays separated tier usage for each volume. As I need to be able to report on the tier split at the volume level (same information in this view) but I don’t see an option for this in reports. I’m aware that this can be collected manually via Compellent Enterprise Manager (http://en.community.dell.com/support-forums/storage/f/4427/t/19621614) but I will need to do this frequently so I’m looking for a programmatic solution.
What I’ve tried:
1. I have already investigated the PowerShell module but the information is not available there.
2. I have looked in the database, the [compmsadb].[compmsauser].[StorageVolume] table looked promising at first as contains the following headers:
 Column                 | Type
SystemSN               | int
TimeStmp               | datetime
IsArch                 | int
IsLong                 | int
VolIndex               | bigint
SnapHist               | varchar(64)
Name                   | varchar(64)
Type                   | varchar(16)
NumPitcs               | int
ConfigSizeMB           | bigint
UsedSizeMB             | bigint
ReplayMB               | bigint
TotalMB                | bigint
ActualSizeMB           | bigint
Tier1Raid10            | int
Tier1Raid55            | int
Tier1Raid59            | int
Tier2Raid10            | int
Tier2Raid55            | int
Tier2Raid59            | int
Tier3Raid10            | int
Tier3Raid55            | int
UnknownTier            | int
Yet all the Tier entries are 0. – Assume this is normal?
3. I have tried the Storage Center Command Utility (java -jar compcu.jar -c "volume show") and the information is not there either
anyone know how to get this information?

I don't think so, the only ones that can be scheduled are when you click "Edit Data Collector Settings" then "Automated Reports"... You can play with those but I don't think they drill down as far as you are looking for...
This is about as granular you can get:
You can try playing with the scripting to see if you can make it but I'm not sure if the scripting allows you to get that much detail or not.

Similar Messages

  • Reporting Volume Tier Usage in Enterprise Manager

    The gridview at  "Compellent Enterprise Manager > Storage > Storage Types > Assigned Redundant > Volumes" displays separated tier usage for each volume. As I need to be able to report on the tier split at the volume level (same information in this view) but I don’t see an option for this in reports, how can one extract this information as a csv file? 

    I don't think so, the only ones that can be scheduled are when you click "Edit Data Collector Settings" then "Automated Reports"... You can play with those but I don't think they drill down as far as you are looking for...
    This is about as granular you can get:
    You can try playing with the scripting to see if you can make it but I'm not sure if the scripting allows you to get that much detail or not.

  • Programmatically download/export search usage reports

    Hi all,
    With Sharepoint 2013 enterprise (on premise) ... is there a chance to Programmatically download/export search usage reports ( with Powershell for example) ?
    These reports are requested
    every two weeks by some users who do
    not have access to the Web Administrator.
    Thanks for your help

    http://social.technet.microsoft.com/Forums/sharepoint/en-US/dc719361-50bc-40ba-bd6b-5035c5a876ca/export-report-from-sharepoint-over-powershell
    $wc = New-Object System.Net.WebClient
    $wc.Credentials = [System.Net.CredentialCache]::DefaultCredentials
    $url = "your url here"
    $file = "d:\temp\output_file_location_and_name.csv"
    $wc.DownloadFile($url, $file)
    Or 
    http://radutut.wordpress.com/2013/01/27/how-to-get-search-analytics-reports-programmatically-in-sharepoint-2013/
    SPSecurity.RunWithElevatedPrivileges(delegate
    // You can use SPContext.Current.Site.ID if you have HttpContext
    using (var site = new SPSite(siteId))
           var context = SPServiceContext.GetContext(site);
           var searchProxy = context.GetDefaultProxy(typeof(SearchServiceApplicationProxy)) as SearchServiceApplicationProxy;
           var topQueries = searchProxy.GetSearchReport(1, Guid.Empty, Guid.Empty, startDate, false, maxRows);
           foreach (var query in topQueries)
                  //process top search term
    http://www.sharepointtalk.net/2014/02/query-sharepoint-search-analytics-using.html

  • Norton reports high memory usage with firefox and it crashes often

    Norton antivirus 2011 has pop up warnings reporting high memory usage from Firefox. I have been getting theem often and my computer is crashing often after those pop up warnings. Thanks

    Safe mode did not help.
    I have disabled ALL extensions and plug-ins, but the problem with "zig-zag" memory usage still remains (I've not tried to leave browser open for the night yet).
    I think I'll do clean reinstall with completely new empty profile (without sync'ed information) to try this out. If this works, I'll start adding stuff (configuration, sync, features, etc) to see what causes the problem.

  • Reports Multi-tier server from Dev 2000:v 1.6.1 don't start on solaris 8

    Reports Multi-tier server from Oracle Developer 2000:version 1.6.1 don't start on Sun Sparc Solaris 8, it writes:
    Segmentation Fault (core dumped). What i have to do?

    Reports Multi-tier server from Oracle Developer 2000:version 1.6.1 don't start on Sun Sparc Solaris 8, it writes:
    Segmentation Fault (core dumped). What i have to do?

  • Error Report: No Data Usage Alerts for 250 MB Plan - June 2014

    Hi, this post will report a data usage alert error for June 2014.
    I previously signed up for data usage alerts when 50%, 75%, and 90% of my data is used. On June 10, at 11:00 PM, I discovered through my Verizon Wireless account that over 250 MB of data had already been used (my plan contains 250 MB). I did not receive any usage alerts prior to this time. I immediately upgraded to the 500 MB plan to avoid overage charges.
    If the data usage alerts had worked properly, I would not have faced the upgrade fee or overage charges. Would it be possible to cancel the additional charges that arose this month because the data usage alerts did not work properly? 
    Thank you!
    Hannah

    Are you serious!!!  Look at all of the calls on this matter in your records and fix it.  I am sure at this point that it is another Verizon scam to solicite millions of dollars from it's customers only to have yet another class action lawsuit filed so the lawyers can get rich and the customers screwed.
    AyaniB_VZW <[email protected]> wrote:
    AyaniB_VZW  created the discussion
    "How to Stop False Data Usage Alerts?"
    To view the discussion, visit: https://community.verizonwireless.com/message/1219549#1219549
    >

  • How to make use of report - RPDLGA20 - Wagetype Usage report?

    Hi,
    Your replies will be highly appreciated.
    I wanted to use report - PRDLGA20 ( Wagetype usage )
    For suppose to check for the Wagetype which processing class has been set up etc,.
    When I ran this report, and click on "Processing class and their values" , I do see list of classes & their specifications but I do not see any indication/mark against the specification defined against the selected Wagetypes. Like wise it is with other results as well.. ( Evaluation class, Cumulation etc.,)Do we need to activate this report by some means so that it will pull out the selected Wagetype configuration details in report rather than listing out whats there in SPRO?
    Thanks for your reply.
    Rgds
    Peddi

    Hi Raja,
    1) Mention the fields that you wish from database table (incase you don't need all the fields from the database table).
    2) Don't use the INTO CORRESPONDING FIELDS OF TABLE ztable clause.
    3)Instead use INTO TABLE ztable (But take care that during the declaration of the ztable, the fields declared are in order that in database table to fetch the Records in sequence).
    Please Find the Syntax and Code Below..
    SELECT *  FROM <TABLE>
      WHERE  <WHERE>
        %_HINTS ORACLE 'INDEX("<TABLE>~<INDEX ID")'.
    SELECT carrid
    INTO TABLE t_spfli
    FROM spfli
    WHERE carrud IN s_carrid AND
    connid IN s_connid
    %_HINTS ORACLE 'INDEX("&SPFLI&" "SPFLI~XXX")'.
    Hope this Is helpFul
    Thanks
    kalyan

  • FRSM Randomly Reports Incorrect Quota Usage

    We are using Server 2008 with FSRM 6.1 and are randomly seeing some quotas reporting incorrectly that they are at 100%. If the folder is checked they are well under the quota but FRSM still reports it as 100% even after a refresh.
    The only way that I have seen the quotas reporting as normal is when we delete them and recreate them but it returns a few weeks later.
    This is only happening on one file server (we have several that FRSM manages the quota allocations for) and disk compression has not been turned on for that volume. This also is not happening to every quota on that volume, only some.
    Any ideas?

    Hi,
    Firstly, please refer to the thread to check if the disk usage of the folder is reported correctly:
    Server 2008R2 reports disk size/free space incorrectly in explorer and disk manager
    http://social.technet.microsoft.com/Forums/en-US/bf5445d5-e796-4cbb-9571-8639b900cfd4/server-2008r2-reports-disk-sizefree-space-incorrectly-in-explorer-and-disk-manager?forum=winserverfiles
    Then check if your current account have permissions to access subfolders. If the user does not have permission to access all subfolder. The size of some folders will not be counted with right click on a folder.
    FSRM usage quota incorrect after deletion of 'RECYCLER' folder
    http://social.technet.microsoft.com/Forums/en-US/4a076bd3-6e84-4392-9d1a-d93e67a9c319/fsrm-usage-quota-incorrect-after-deletion-of-recycler-folder?forum=winserver8gen
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Installing a Forms & Report middle Tier (10.1.2) on a 10.1.3 farm

    I have to install a new farm based on the 10.1.3 release. I will install the Infrastracture and one middle tier in two different Oracle Homes. The problem is that I need also Forms & Report Services, and we know that there will be no F&R services until release 11. The question is:
    can I install a 10.1.2 middle tier instance on top of a 10.1.3 infrastructure (with a different Oracle Homve, of course)?
    Thanks in advance
    Rino

    AS 10.1.3 doesn't have any infrastructure (as well as not having Web Cache etc). The latest full release is 10.1.2.0.2, which includes infrastructure and Forms/Reports. For Identity Management, I'd recommend the new 10.1.4.
    As indicated above, the latest Forms/Reports release is 10.1.2.0.2 (patched to 10.1.2.2), which is the one you should use. You can install either the full Application Server 10.1.2.0.2 with Forms/Reports, or use the Forms&Reports Only release.
    Regards,
    Martin

  • BI publisher report : why "Database Usage Tracking Summary"  repport is empty ?

    Hi everyone,
    I'me using BI publisher intergated to Grid Control12c (R3), trying to get "Database Usage Tracking Summary" report folowing Oracle documentation (http://docs.oracle.com/cd/E24628_01/doc.121/e24473/usage_reports.htm#EMADM13568)
    And I have 2 problems :
    1) FTPburst delivery is not working, sftp is configured but still have the folowing error
    Echec de la distribution.
    [INSTANCE_ID=gs00slli052.occ.lan.1424277393149] [OUTPUT_ID=1973]
    Echec de distribution du document
    [INSTANCE_ID=gs00slli052.occ.lan.1424277393149] [DELIVERY_ID=1974]Error deliver document to FTP::Exception happened when calling deliver API::Error deliver document to FTP::FILE=[::Exception happened when calling deliver API::oracle.xdo.delivery.ssh2.SshException: Error in writing data Broken pipeoracle.xdo.service.delivery.DeliveryException: oracle.xdo.delivery.ssh2.SshException: Error in writing data Broken pipe
    at oracle.xdo.service.delivery.impl.DeliveryServiceI
    2) Since FTPburst delivery is not working, i decide to try mail delivery. The delivery itself is working but the report is empty (see Sortie1.xls in attachements)
    So i don't know why is it empty.
    Can someone   guide me  ?

    Hi,
    Thank You for your quick reply. The table permission was alright.
    Its very strange that, we configure usage tracking in obiee 11.1.1.6.0 using enterprise manager and that how all document says. And then it should automatically update the "NQSCONFIG.INI". But it was not updated there. So we need to change all configuration settings in both "Enterprise Manager" and also in the "NQSCONFIG.INI". Then it works fine!!
    Thanks,
    BK.

  • Daily metrics report of Exchange usage

    Hello Everyone,
       I was delegated the task to find a way to perform an daily metrics report of our new exchange system and am at a loss of how to begin. We have recently rolled out an Exchange 2013 on premise deployment to serve 6000 accounts. Our environment consists
    of 6 dual role exchange servers.The request was that I present a daily report with the following criteria I/O counts, CPU usage, Storage, bandwidth, etc.
    Any suggestions are greatly appreciated 

    Hi sanoske312,
    I suggest ask Script Center for help so that you can get more professional suggestions. For your convenience:
    https://technet.microsoft.com/en-us/scriptcenter/dd742246.aspx?f=255&MSPPError=-2147217396
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Mavis Huang
    TechNet Community Support

  • Untimely reporting of data usage

    Why is Verizon's reporting of my data usage so sporadic?  I received two data reports today, one at ~730 am, and one around 9:30am.  Since then:  NOTHING!  Even though I streamed two 40+ minute programs (at their lowest resolution) from Hulu this afternoon.  It's now 10:24pm, and still no report of my latest usage.  I have 2 days left on my cycle, and I want to use as close to my 10 Gb without going over.  They charge per Gb if you go over, plus they "round up".  If they keep you in the dark the last couple of days of your cycle, it pretty much assures them an add-on rip-off!  Of course, it's all perfectly legal, since you have to sign the contract before you find out how they do the accounting!  They own the FCC, so they think they have the right to rip us off. 

    If you were to go through at least 50 pages on the Mobile Web it would have been 0.6MB.  One Game from Media Center is 0.2MB and one ringtone is 0.2MB. Here's a link to access the example of average data usage.
    http://support.vzw.com/clc/faqs/Calling%20Plans/nationwide.html?grp=1&faq=12

  • SAP Report to find usage/transactions access per module

    Hi,
    Is there any report/tool avialable in SAP to see how many transactions are being executed in a given period of time per MODULE.
    Actually management wants to see the details and asked me to provide the summarized report...(i believe they want to see the SAP usage in the company)
    Any help is highly appreciated in this regard.

    Hello,
    I never see something like that in SAP, the only way is to use the STAT transaction but there is a too low history.
    If you find something, please, let me know.
    Fred
    PS: I have create my own function to trace all the specific program.

  • Report for Attribute Usage !!

    Hi All,
    As per my customer requirement, Need to show the below attributes in Report.
    Attribute Type
    Attribute Name
    Attribute Subject Area
    Attribute folder
    Attribute path
    Attribute description
    Attribute creation
    Attribute last modification
    Report usage
    All these columns need to fetch from repostiory & catalog. Please guide me on this task.
    Thanks in Advance !!

    You need to enable usage tracking that would help some level.
    Search in the net to get how to config it.
    if helps mark
    ~ http://cool-bi.com

  • Programmatic Report Trigger

    I'm evaluating Reports as one the final candidate report writers for integration with a new application. I have been reading much of the documentation on the product, but I still have a question: Is there any way to programmatically trigger a report from a C++ application? I've seen discussion about Java integration, but none about C++. Am I missing something?
    Also, I ultimately need to generate reports from both files and DB queries, and output results to local files and probably an application GUI. I believe this should be fairly straightforward, but I would welcome any comments on my options and/or the feasibility of these requirements.

    I'm not familiar with C++, but I believe you can issue a host command, right? You can start a report like this:
    host_command('rwrun report=......')
    You can issue this command on the reports server host machine.
    One thing to remember is that Reports 9i and 10g are web based, not a client/server application. If you want to run a report from a client c/s application, it would be:
    host_command('http://......')
    which should open a browser.
    ultimately need to generate reports from both files and DB queriesA report is based on DB queries, of course, but what do you mean by "generate reports from files"?

Maybe you are looking for