Programmatically set Multi-value parameters

Hi, I hope someone can help.
I have a .net web application written in VS2008. I display reports within a report viewer object. I currently set report parameters within code using the SetParameterValue property within the report document object before passing the document to the viewer.
This works fine for single value parameters, but I have a report which accepts multi value parameters and I am having problems trying to find any information about if this can be done within my code. I understand the parameter is an array, therefore am I right in thinking I can pass an array into the SetParameterValue property?
Any help would be much appreciated.
Thanks

Hello Julie
You do not mention what version of CR you are using in .NET or what version of CR the reports were written in.
There is a fair number of good threads on this issue in the forum, see if searching comes up with anything.
Also, use the search box at the top right corner. That will search KBases, articles, Blogs, wikis, etc., etc.
Oh and sample apps are here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
and the [Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23] is a great article to go through.
- Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Similar Messages

Setting multi-value parameters using ReportExecutionService

Does anyone know how to set multi-value parameters using ReportExecutionService in C#?
If I have
rsExec = new ReportExecutionService2005.ReportExecutionService();
ReportExecutionService2005.ParameterValue[] parameters = new ReportExecutionService2005.ParameterValue[2];
parameters[0] = new ReportExecutionService2005.ParameterValue();
parameters[0].Label = "Report_Begin_Date";
parameters[0].Name = "Report_Begin_Date";
parameters[0].Value = "4/15/2007";
parameters[1] = new ReportExecutionService2005.ParameterValue();
parameters[1].Label = "SalesID";
parameters[1].Name = "SalesID";
parameters[1].Value = ??? //Here, this parameter should accept multiple values like 200, 201, 202, etc.
rsExec.SetExecutionParameters(parameters, "en-us");
How would I set the SalesID to take multiple values?

hi
how to set dynamic parameters values.
please help me.
reportexe.
ParameterValue[] parameters =
new reportexe.ParameterValue[5];
if (_parameters.Length > 0)
parameters[0] =
new reportexe.ParameterValue();
parameters[0].Label =
"mgrid";
parameters[0].Name =
"mgrid";
parameters[0].Value =
"[DMMGR001MT].[MGR ID].&[10]";
parameters[1] =
new reportexe.ParameterValue();
parameters[1].Label =
"locid";
parameters[1].Name =
"locid";
parameters[1].Value =
"[DMDPT001MT].[DPT ID].&[700]";
//[DMDPT001MT].[DPT ID].&[700]
parameters[2] =
new reportexe.ParameterValue();
parameters[2].Label =
"usrid";
parameters[2].Name =
"usrid";
parameters[2].Value =
"[FILLED BY USER].[USER ID].&[yshah]";
//[FILLED BY USER].[USER ID].&[yshah]
parameters[3] =
new reportexe.ParameterValue();
parameters[3].Label =
"fromdate";
parameters[3].Name =
"fromdate";
parameters[3].Value =
"[FIRST DOSE DATE].[Date Key].&[20100101]";
//[FIRST DOSE DATE].[Date Key].&[20100101]
parameters[4] =
new reportexe.ParameterValue();
parameters[4].Label =
"todate";
parameters[4].Name =
"todate";
parameters[4].Value =
"[FIRST DOSE DATE].[Date Key].&[20100131]";
// [FIRST DOSE DATE].[Date Key].&[20100131]
this is my code.
indu

[Forum FAQ] How to configure a Data Driven Subscription which get multi-value parameters from one column of a database table?

Introduction
In SQL Server Reporting Services, we can define a mapping between the fields that are returned in the query to specific delivery options and to report parameters in a data-driven subscription.
For a report with a parameter (such as YEAR) that allow multiple values, when creating a data-driven subscription, how can we pass a record like below to show correct data (data for year 2012, 2013 and 2014).
EmailAddress                             Parameter
Comment
[email protected]              2012,2013,2014               NULL
In this article, I will demonstrate how to configure a Data Driven Subscription which get multi-value parameters from one column of a database table
Workaround
Generally, if we pass the “Parameter” column to report directly in the step 5 when creating data-driven subscription.
The value “2012,2013,2014” will be regarded as a single value, Reporting Services will use “2012,2013,2014” to filter data. However, there are no any records that YEAR filed equal to “2012,2013,2014”, and we will get an error when the subscription executed
on the log. (C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles)
Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportParameterException: Default value or value provided for the report parameter 'Name' is not a valid value.
This means that there is no such a value on parameter’s available value list, this is an invalid parameter value. If we change the parameter records like below.
EmailAddress                        Parameter             Comment
[email protected]         2012                    NULL
[email protected]         2013                     NULL
[email protected]         2014                     NULL
In this case, Reporting Services will generate 3 reports for one data-driven subscription. Each report for only one year which cannot fit the requirement obviously.
Currently, there is no a solution to solve this issue. The workaround for it is that create two report, one is used for view report for end users, another one is used for create data-driven subscription.
On the report that used create data-driven subscription, uncheck “Allow multiple values” option for the parameter, do not specify and available values and default values for this parameter. Then change the Filter
From
Expression:[ParameterName]
Operator   :In
Value         :[@ParameterName]
To
Expression:[ParameterName]
Operator   :In
Value         :Split(Parameters!ParameterName.Value,",")
In this case, we can specify a value like "2012,2013,2014" from database to the data-driven subscription.
Applies to
Microsoft SQL Server 2005
Microsoft SQL Server 2008
Microsoft SQL Server 2008 R2
Microsoft SQL Server 2012
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

For every Auftrag, there are multiple Position entries.
Rest of the blocks don't seems to have any relation.
So you can check this code to see how internal table lt_str is built whose first 3 fields have data contained in Auftrag, and next 3 fields have Position data. The structure is flat, assuming that every Position record is related to preceding Auftrag.
Try out this snippet.
DATA lt_data TYPE TABLE OF string.
DATA lv_data TYPE string.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename = 'C:\temp\test.txt'
CHANGING
    data_tab = lt_data
EXCEPTIONS
    OTHERS   = 19.
CHECK sy-subrc EQ 0.
TYPES:
BEGIN OF ty_str,
a1 TYPE string,
a2 TYPE string,
a3 TYPE string,
p1 TYPE string,
p2 TYPE string,
p3 TYPE string,
END OF ty_str.
DATA: lt_str TYPE TABLE OF ty_str,
      ls_str TYPE ty_str,
      lv_block TYPE string,
      lv_flag TYPE boolean.
LOOP AT lt_data INTO lv_data.
CASE lv_data.
    WHEN '[Version]' OR '[StdSatz]' OR '[Arbeitstag]' OR '[Pecunia]'
         OR '[Mita]' OR '[Kunde]' OR '[Auftrag]' OR '[Position]'.
      lv_block = lv_data.
      lv_flag = abap_false.
    WHEN OTHERS.
      lv_flag = abap_true.
ENDCASE.
CHECK lv_flag EQ abap_true.
CASE lv_block.
    WHEN '[Auftrag]'.
      SPLIT lv_data AT ';' INTO ls_str-a1 ls_str-a2 ls_str-a3.
    WHEN '[Position]'.
      SPLIT lv_data AT ';' INTO ls_str-p1 ls_str-p2 ls_str-p3.
      APPEND ls_str TO lt_str.
ENDCASE.
ENDLOOP.

Multi-value parameters and strings with leading zeros

I have invoice number as a multi-value parameter. Invoice is a string,10 (VBRP.VBELN) .
Invoice number is my group. If I enter invoices 100 and 200 as parms, then I only get data for invoice #100 (the lowest value entered). But if I enter 100, 0000000100, 200, 0000000200 as parms, then I get data for both invoices. Is there a way to get around having to enter the invoice number in both formats. BTW, if I only enter 0000000100 and 0000000200 then I get no data.
Selection criteria is (VBRP.VBELN) = ?invoiceno --- parms are defined as allow muliple values and allow discrete values.

Oops, that's not gonna work with multi-value parameters. How about:
if IsNumeric((VBRP.VBELN)) then
ToText(Val((VBRP.VBELN)), "0") in {?invoiceno}
else
(VBRP.VBELN) in {?invoiceno}
end if
BTW, the reason why your original formula didn't work was because the "=" should have been "in". The above is needed only if the (VBRP.VBELN) field might contain leading zeroes.
HTH,
Carl

Optional Multi-Value Parameters in a URL

I have 3 summary reports, that each need to hyperlink to 4 detail reports. The summary reports use multi-value string parameters that are set to "optional" (this is crystal 2008). I need to construct URLs to support these optional parameters. The opendoc documentation says to use "no_value" as the param argument, but that doesn't work - I get the string "no_value" in the selection criteria which causes it to fail. Ideally, I'd use either lsMMyParam="NULL" or lsMMyParam="", but neither works. Anyone ever done this?

hi Bob,
have you tried doing this...
&lsMPromptName=[]
lsM prompt / parameter values have to be passed with square brackets as far as i know.
jamie

How to include NULL in multi value parameters

Good Morning,
I'm posting this question after i tried other links and was not successful. I'm using a report builder to create a report. SSRS2008R2.
I have a sql to get the data into the data set. Source is ORACLE DB. The query is pulling lastname,firstname,dob,joindt,divname. I created a parameter in the SQL :
WHERE DIVNAME IN (:divname).
I created another dataset (select distinct divname from table2) and selected the paramter properties to get the values from the second dataset and selected it to be multivalued. However the user wants to see the NULL's or BLANKS that are in the DIVNAME.
Can some one please tell me as how i can acheive this?
When i run the query in the sql plus i get (null) values as well, but when in the second dataset i run the query i just get the DISTINCT divnames and a "BLANK" field (in SSRS)
Thanks

Hi thinkingeye,
According to your description, you want to include the null values in your multiple values parameter. Right?
In Reporting Services, we can't allow both null values and multiple values in a parameter. In this scenario, since you have created a dataset for getting distinct divname, we suggest you try "select distinct isnull(divname,-1) from [table]" in this
dataset so that all the null values will return -1. Also using isnull() function to replace divname in other query. This might be the most effective work around.
Reference:
Null and Multi-value parameter possible
Include Null Value Multi-Value Parameter list
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Issues updating/setting multi value lookup columns via powershell

Hi All,
I have an issue updating multi values in a lookup field via powershell
I can update a single value lookup field as below but can't get to update if its multi value.
As stated below when I hardcode it. It works.
No idea what 'm missing. Any help will be appreciated.
#Hardcoded works below as you can see i'm setting 3 values
$array = @($realval.Split(';'))
for ($i = 0; $i -lt $array.Count - 1; $i += 2)
$word = $array[$i].Trim('#')
$number = $array[$i+1].Trim('#')
"$number $word"
$lookupvalue1 = GetLookUpValues -val $number
[Microsoft.SharePoint.SPFieldLookupValueCollection] $itemValues = New-Object Microsoft.SharePoint.SPFieldLookupValueCollection
[Microsoft.SharePoint.SPFieldLookupValue] $lookupvalue = New-Object Microsoft.SharePoint.SPFieldLookupValue
[Microsoft.SharePoint.SPFieldLookupValue] $lookupvalue2 = New-Object Microsoft.SharePoint.SPFieldLookupValue
[Microsoft.SharePoint.SPFieldLookupValue] $lookupvalue3 = New-Object Microsoft.SharePoint.SPFieldLookupValue
$lookupvalue.LookupId = 1
$lookupvalue2.LookupId = 2
$lookupvalue3.LookupId = 6
$itemValues.Add($lookupvalue)
$itemValues.Add($lookupvalue2)
$itemValues.Add($lookupvalue3)
#$itemValues.Add($lookupvalue)
$CMRSItems["Event Type"] = $itemValues;
Write-Host "items:" $itemValues
$CMRSItems.Update()
# This works when its updating only one value but when it needs to update multivalue it only updates the last one
#so for example with the lookupvalue above only 6 gets updated below
$array = @($realval.Split(';'))
for ($i = 0; $i -lt $array.Count - 1; $i += 2)
$word = $array[$i].Trim('#')
$number = $array[$i+1].Trim('#')
#$number
"$number $word"
#send param to GetLoolValues func to return records as SPFieldLookupValue
$lookupvalue1 = GetLookUpValues -val $number
#I can view the lookupvalue returned successfully
#Write-Host $lookupvalue1
[Microsoft.SharePoint.SPFieldLookupValueCollection] $itemValues = New-Object Microsoft.SharePoint.SPFieldLookupValueCollection
#This LookupId returns 3 values like on the hardcoded one above like so :1,2,6
$lookupvalue.LookupId = $number
$itemValues.Add($lookupvalue)
$CMRSItems["Event Type"] = $itemValues;
#I can view the items returned successfully
Write-Host "items:" $itemValues
$CMRSItems.Update()

The problem I can see with your code is that the below line of code, you are instantiating inside the for loop. This should have been outside the for loop as by keeping it inside the loop you are overriding the value.
[Microsoft.SharePoint.SPFieldLookupValueCollection] $itemValues = New-Object Microsoft.SharePoint.SPFieldLookupValueCollection
Please have a look at the below solution and modify your code as per your requirement. What I am trying to achieve in the below code is that I have a listA in which one of the field is being used as a multi-lookup in my listB.
$lookupCollection = $something.split(";")
$LookupMasterList=$web.Lists["ListA"]
[Microsoft.SharePoint.SPFieldLookupValueCollection] $lookupValueCollection = New-Object Microsoft.SharePoint.SPFieldLookupValueCollection
#Get the Lookup Item from Parent List
foreach($item in $lookupCollection){
IF([string]::IsNullOrEmpty($item.trim())) {
continue;
$LookupItem = $LookupMasterList.Items | Where-Object { $_.Item("FieldInternalName") -eq $item.trim()}
if($LookupItem -ne $null)
$myLookup = New-Object Microsoft.Sharepoint.SPFieldLookupValue($LookupItem.ID,$item.trim())
$lookupValueCollection.Add($myLookup);
#Set the Lookup field value
if([string]::IsNullOrEmpty($lookupValueCollection)){
continue;
else{
$newItem["Lookupfieldinternalname"] = $lookupValueCollection
The above logic has no hard coding and it fetches the lookup information directly from the master list and generates a collection based on that. You can modify the above code as per your requirement.
Geetanjali Arora | My blogs |

How to programmatically set the value to current Page layout property?

Hi,
How do I set any text value to the current page layout [comment] property and save it.....here my current page is using a custom page layout called spPageLayout1
To be very much generalized how I can set and save any value to current page property programmatically....on load event I need to set the value.
It is a publishing page layout.

Hi,
According to your post, my understanding is that you want to set the value to current Page layout property.
To get current page property, you can refer to:
How to get current Pages details in SharePoint2010 publishing site
Get Content Field Value in Article Page
To get current page layout property, you can refer to:
PublishingPage.Layout Property (Microsoft.SharePoint.Publishing)
PageLayout.Title Property (Microsoft.SharePoint.Publishing)
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to programmatically set item value

I created button âAccept ALLâ within region to set all values of field to âYâ when clicked on and another button âReject ALLâ to set all field values to âNâ. Values are intialy derived from
Region Source (partial query only):
...DECODE(eval_contract_accepted_ind,'Y',htmldb_item.text(6,'YES',3,3),'N',htmldb_item.text(6,'NO',3,3),NULL,htmldb_item.select_list(6,'Y','Yes;Y,No;N')) accepted,...
So values in that field are populated conditionally from static lov Yes;Y,No:N
I created two processes and allocated them to the relevant button, but non of the values get set.
ACCEPT_ALL process:
for i in 1..htmldb_application.g_f01.count
loop
if htmldb_application.g_f06(i) not in ('YES','NO') then
htmldb_application.g_f06(i) := 'Y';
end if;
end loop;
REJECT_ALL process:
for i in 1..htmldb_application.g_f01.count
loop
if htmldb_application.g_f06(i) not in ('YES','NO') then
htmldb_application.g_f06(i) := 'N';
end if;
end loop;

Hi,
According to your post, my understanding is that you want to set the value to current Page layout property.
To get current page property, you can refer to:
How to get current Pages details in SharePoint2010 publishing site
Get Content Field Value in Article Page
To get current page layout property, you can refer to:
PublishingPage.Layout Property (Microsoft.SharePoint.Publishing)
PageLayout.Title Property (Microsoft.SharePoint.Publishing)
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Handling multi-value parameters in VS 2005 / Crystal 2008

In my program I am trying to handle a multi-value parameter using the following code, passing it an array of type string with the values that the user selected, but using the following code returns a 'Missing parameter values' error.
    For Each crParameterFieldDefinition In crParameterFieldDefinitions
        If Not crParameterFieldDefinition.IsLinked And crParameterFieldDefinition.ReportName = "" Then
            crParameterValues = crParameterFieldDefinition.CurrentValues
            crParameterDiscreteValue = New ParameterDiscreteValue
            If crParameterFieldDefinition.EnableAllowMultipleValue Then
                Dim j As Integer
                Dim x() As String = Session("FieldDef")
                For j = 0 To x.GetUpperBound(0) - 1
                    crParameterDiscreteValue.Value = x(j)
                    crParameterFieldDefinition.CurrentValues.Add(crParameterDiscreteValue)
                Next
            End If
            Session.Remove("FieldDef")
            i = i + 1
        End If
    Next
I have also tried loading the values into a ParameterValues object and then using ParameterFieldDefinition.ApplyCurrentValues on it, which has been working fine for all of my single value inputs, but using that throws an error about a type mismatch. Any help at all would be appreciated.

There are a few samples to look at here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Vbnet_win_paramengine.zip, vbnet_win_multirangeparam.zip and vbnet_win_rangeparameters.zip may be good
Also, [this|http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23?quicklink=index&overridelayout=true] article has great info.
This is all assuming you are on SP3 for CR2008:
https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip
SP 3 msi
https://smpdl.sap-ag.de/~sapidp/012002523100007123592010E/cr2008sp3_redist.zip
SP 3 msm
https://smpdl.sap-ag.de/~sapidp/012002523100007123582010E/cr2008sp3_mm.zip
Ludek

Multi-Value Parameters to Oracle Stored Procedures via SQL Commands

Hi,
When you used stored procedure in CR, you need to declare REF CURSOR, This type of cursor is a dynamic cursor not a static cursor. Hence, you are able to manipulate dataset in this type of cursor.
Regards,
Titanium0203

As far as I know the documentation on CR & stored procedures says that the REF CURSOR has to be a strongly bound one.
Could you go into a little more detail? Do you mean I should put a multi-valued parameter into a REF CURSOR? Can you post some code snippets here?

How to pass multi-value parameters to DDS (data driven subscription)?

Using RS2005, how should multivalue parameters be stored in a database field so that a data driven subscription can properly read and use them? I have so far had no luck using syntax of:
1) parm1, parm2
2) parm1,parm2
Do single qutoes need to explicitly wrap the values? Can you please provide an example and a SQL INSERT statement using parm1 and parm2 to demonstrate what to store in the database field?
Thanks!!

I have skimmed through this an have ran into this problem before but not with RS specifically, but with other ASP.NET apps I have built. Maybe this work around will help.
In my database I created a table function I call udf_Split List. It looks like this: (Can't remember where I got this from, but it's not my own.)
CREATE
FUNCTION [dbo].[udf_SplitList]
@List
varchar(max),
@SplitOn
nvarchar(5)
RETURNS
@RtnValue table
Id
int
identity(1,1),
Value
nvarchar(100)
AS
BEGIN
While
(Charindex(@SplitOn,
@List)
> 0)
Begin
Insert
Into @RtnValue
(value)
Select Value
=
ltrim(rtrim(Substring(@List,
1,
Charindex(@SplitOn,
@List)
- 1)))
Set @List
=
Substring(@List,Charindex(@SplitOn,
@List)
+
len(@SplitOn),
len(@List))
End
Insert
Into @RtnValue
(Value)
Select Value
=
ltrim(rtrim(@List))
Return
END
Then, in my query I used the following parameter: QueriedField IN(select value from dbo.udf_SplitList(@Parameter,',') (I used commas to separate the list, but you can use whatever you like (;,|,*, etc.)
For you @Parameter would be your DDS list parameter. Hope this helps. You can enter your list like Item1,Item2,Item3 etc.

Multi Value Parameters help

Hi Gurus
In the main dataset query i created a parameter "where k.jlocat=:LOC or :LOC is null". These are ORACLE Parameters and hence the :. In another dataset i created a simple query as
select distinct jlocat as LOC
FROM TABLE1
Every thing works fine so far. Now i want to select multiple values for this i edited the @LOC parameter to select multiple values and changed my WHERE CLAUSE in the main dataset as where k.jlocat=:LOC or :LOC='All'.
Now when i save and run the report , i cannot click on 'Select All' as it gives me an error:ORA-00907: missing right parenthesis.
I'm confused as where i'm missing the right parenthesis.Please need advice.
Thanks

Hi Pmunshi,
The error "ORA-00907: missing right parenthesis." occur when you entered a left parenthesis, but missed the closing right parenthesis; or you entered invalid data within the parentheses. Please refer to the link below to see the detail information.
http://www.techonthenet.com/oracle/errors/ora00907.php
In a Reporting Services report, if we check the "Allow Multiple values" option, than we need to change the "=" operation to "In" in the query.
where k.jlocat in(:LOC)
Besides, which features do you want to achieve by using " or :LOC="All" "? If we check the "Allow Multiple values" option, we do not add any extra query. If we select "Select All" option for this parameter, it will return all the records.
If I have anything misunderstood, please point it out.
Regards,
Charlie Liao
TechNet Community Support

MULTI VALUE PARAMETERS

HELLO,
I need to bring all the information for the List, I am using "Allow MultipleValues", but I cant make it work :(
I have One dataset for Falculty Name, One with student with balances, amd the last one os Falcuty with classes and stuudent with balances, I am doing a lookup between Student with balances amd Falcuty with classes.
I am trying to bring all the Falcuty by year and and term, I have the parameter for year and term those are working for single selecion..... HELP

I use a split string function
and then in the Where clause of your select you can put
Where facilityName in (Select item from dbo.fnSplit(@parameter,','))
The script for fnSplit is
Create FUNCTION [dbo].[fnSplit]
@sInputList VARCHAR(8000) -- List of delimited items
, @sDelimiter VARCHAR(8000) = ',' -- delimiter that separates items
RETURNS @List TABLE (item VARCHAR(8000))
BEGIN
DECLARE @sItem VARCHAR(8000)
WHILE CHARINDEX(@sDelimiter,@sInputList,0) <> 0
BEGIN
  SELECT @sItem  = RTRIM(LTRIM(SUBSTRING(@sInputList,1,CHARINDEX(@sDelimiter,@sInputList,0)-1))),
    @sInputList = RTRIM(LTRIM(SUBSTRING(@sInputList,CHARINDEX(@sDelimiter,@sInputList,0)+LEN(@sDelimiter),LEN(@sInputList))))
  IF LEN(@sItem) > 0
   INSERT INTO @List SELECT @sItem
END
IF LEN(@sInputList) > 0
  INSERT INTO @List SELECT @sInputList -- Put the last item in
RETURN
END

How to pass Multi and Singlr value Parameters to DB2 query, which is using in SSRS report for ODBC connection

Hi Guys,
I am using DB2 database in SSRS. I have to pass Single Value and Multi Value Parameters. I tried with Select * From DB2Table Where
Column=@PRM_Name Or Select * From DB2Table Where
Column=:PRM_Name . It is not working and throwing error. Please help me out.
Connection Details: ODBC
Thanks Shiven:)

Hi SKM,
So you mean to say that Go to DataSource->Add Dataset-> Query Type-Text-> Under Query:
click on fx (Expression)-> Write this expression
For Single Value Parameter:
="SELECT customer_name, telephone_number, address1, address2, city from MyTable
WHERE city = '" + Parameters!City.Value + "'"
OR
="SELECT customer_name, telephone_number, address1, address2, city from MyTable
WHERE city = '" & Parameters!City.Value & "'"
Keep it in mind if Parameter is String then
It should be in Single quote ''.
Like
="SELECT customer_name, telephone_number, address1, address2, city from MyTable WHERE city
='Hyderabad' "
For Multivalu Parameter:
="SELECT EmployeeID, FirstName, LastName, LoginID FROM SHIVEN.AUDIT Where FirstName
in ('" + REPLACE(JOIN(Parameters!City.Value,","),",","','") + "')"
NOTE:
If your Parameter is Single Value Parameter and You want to enter string values with Coma (,)
separated (Like Hyderabad, Chennai, Delhi).
In this case, you have to use below expression.
="SELECT customer_name, telephone_number, address1, address2, city from MyTable
WHERE city IN ('" + REPLACE(Parameters!City.Value ,",","','") + "')"
OR
="SELECT customer_name, telephone_number, address1, address2, city from MyTable
WHERE city IN ('" & REPLACE(Parameters!City.Value ,",","','") & "')"
In above expression: Replace will replace all , with ‘,’ and city IN (‘Hyderabad’, ‘Chennai’,
‘Delhi’) will not throw any error.
Note: You have to write expression in one line in Expression editor for dataset
query
Thanks It is working fine but it is tough job if query is big.
Hi S kumar,
The above approach we use when we have source like DB2, becasue DB2 has some syntactical differences to pass multivalue paramaeter. I tested and it works good, if i am mentioning the query in above format by using Fx button while creating dataset.
but if we want fetch data from view which exist in DB2 and we need to call db2 view in SSRS and pass multivalue parameter in a way we did above then could you please mention the steps and way to achieve this.
Thanks in advance!

Programmatically set Multi-value parameters

Similar Messages

Maybe you are looking for