Programmed tracks +click live

Hi,
We intend to play live with several pre programmed tracks :
1 audio programmed bass track
2 audio (L/R) programmed keyboard tracks
1 audio click track
All these tracks were created in Logic Pro and are midi tracks triggering virtual sounds and EX24 samples.
So we need to have on stage at least 4 audio outputs to feed the main PA.
1/ if we bring a mac book pro running Logic Pro on stage, which audio interface will be appropriate (with at least 4 outputs) ? Will it be safe (crash/ disk failure) ?
2/ If we don’t bring a laptop on stage, what piece of gear will be recommended in order to play these 4 separated tracks ?
Thanks a lot in advance for all inputs.
E.

A good FireWire audio interface would be a reliable option. Soundcards by RME are the best to my knowledge. They are also expensive.
I've read that bands performing with laptop setups would usually have TWO identical setups with a switch between them in case one fails for some reason. However, if you want it to be 100% fail-proof, bounce everything in audio and burn an audio CD, because the more technology you use on stage, the more chances there are it will fail on you.

Similar Messages

Using OSX 10.8 DW CS6 when I click "live" it says "flash plugin" "not found".

Using DW CS6 when I click "live" it says "Flash Plugin was not found. To view Flash content in Live View install the Firefox Flash Plugin from www.adobe.com."
My default browser is Chrome. DW uses Chrome as the primary browser. (FFox is secondary.)
I do have Firefox and do not have Flash on it. I open Flash content Chrome, and I installed an HTML5 video viewer add-on in FFox (but haven't tried it yet).
I also have the Dreamweaver HTML5 Video View add-on, so why am I getting that message? Furthermore, the HTML code doesn't have any Flash objects. (The code is the source HTML from www.google.com page, without any changes.)
How do I make DW display the "Live" view of the code without giving me an error? (My end goal is to find out what google does when you enter something in the search box and hit the Enter key, actually, I'd like to see why the result of the search is displayed the way it is - default should be Web view, but Image view shows instead. I want Web to show!)

"Why would anybody paste Google's source code into their own web page?" To learn from it.
I'm sorry Phil, but you can't learn much from Google's source code because search engines are dynamically programed with behind-the-scenes code and content from databases that you can't see. You're just spinning your wheels here. If you want to learn how to make a search engine, I'd be happy to point you to some relevant PHP & MySql tutorials.
The issue still remains that DW is giving me the error (flash plugin not found)
When DW starts acting weird, the first thing to try is Deleting Corrupted Cache in DW
http://forums.adobe.com/thread/494811
If that doesn't help, try Restore Preferences
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If all else fails, use the CC Cleaner Tools below followed by a software re-install.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Nancy O.

How to track click throughs in an a pdf document?

I am working on an online magazine created using Adobe Acrobat 9 Pro. The document is made in Indesign CS4 and converted to a pdf for reading online or downloading. It's important to us to be able to track click throughs to advertisers urls. I've been told by both Adobe tech support and my hosting provider that it can't be done. Is there another product or service which would allow us to do track these click throughs?
Any help is greatly appreciated.

Clicking on a link in a PDF is not different from clicking a link in a browser. In both cases, a URL is launched.
In this URL you can include the parameters your web-server needs in order to record the action.
You can even add an extra parameter to tell you what the source of the click was, another web-page or a PDF.

Regarding the tracking the live progress of the cube processing.

Hello,
Good Morning. As we are having multiple cube applicatons as part of our project, there are multiple cubes for which we need to evaluate the completion time for the cube processing.
By referencing one cube, the cube processing is taking one hour one day and some other day, It is taking an hour for completion. Beacuse of this reason, we could not be able to asses the time for completion of cube processing.
Is there any chance to track the live status of the cube processing?. Which means, the expected time for completion? How many measure group processing are completed and how many left?
Please provide your inputs on this.
Thanks in advance.
Regards,
Pradeep.

Hi Kumar,
According to your description, you want to monitor the progress of cube processing. Right?
In Analysis Services, there are several tools can help us monitor the processing performance, like SQL Profiler, AS Trace, Performance Monitor, etc. We can also use XMLA command or DMV to get the information. Please see:
Monitoring processing performance
Monitoring and Tuning Analysis Services with SQL Profiler
However, if you want to get the exact live data of the cube processing, Olaf's script can be an effective solution to get the current processing status for some measures or dimensions. But some information still can't be traced, like expected time for completion,
etc. So for your requirement, it can't be fully achieved.
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Recording Effects on top of a track, or tracking automation live?

Is there a way for me to play with the dials and knobs of my plug-ins after I have already recorded a track?
I want to be able to use a pretty cool plug-in that I found that has a great range of filters, sweeps and such, but I've already laid down the track and the automation would be extremely difficult to map out by hand...
Is it possible to track automation live?
Any clues?

Is it possible to track automation live?
Sure several ways of doing this:
Set the Audio track to Automation "Latch" or "Write" Mode - press play - tweak the Plug In with your Mouse - the Automation Engine will record your mouse movements
Assign different Controllers (knobs on your Synth or Control device) to different parameters in the Automation->Quick Access Menue - go into "Latch" or "Write" Mode - press play - record the Controller movements
or really old school "live"
Assign the Audio track to a Bus - use that Bus as an Input for a new Audio track - press record - tweak your Plug In while recording the new Audio track - the Plug In movements will get printed onto the new track together with the original Audio

How do i track clicks with jsp/servlets?

I would like to know how to imitate the click of link in JSP or serlvet, in order to track clicks.
I have pages with links containing tel protocol URIs like this:
Click here to listen!
I want to replace the above with something like this:
Click here to listen!
And have call_tracking.jsp do its tracking stuff and then spawn a phone call, just like the first example does. I do not want to bother the user with another page, hence the need to accomplish the click action programmatically. I presume this feat is achievable via Response header magic, I just don't know the right incantation ;-)
Thanks

You should create a servlet to track the links, let´s say LinkTracker. Here I have an example for you. Each link calls a servlet and pass the url as a parameter.
<html>
<head>
    <title>Some Links Tracked by the LinkTracker Servlet</title>
</head>
<body>
Some good links for you. Each link is directed
through the LinkTracker Servlet. Click on a few and visit
the <a href="LinkTracker">LinkTracker Servlet</a>.
<ul>
    <li><a href="LinkTracker?link=http://www.google.com">
      Google Site</a></li>
    <li><a href="LinkTracker?link=http://www.yahoo.com">
      Yahoo site</a></li>
    <li><a href="LinkTracker?link=http://java.sun.com">
      Sun Microsystems</a></li>
</ul>
</body>
</html>And here the code to LinkTracker servlet
public class LinkTracker extends HttpServlet {
static private Hashtable links = new Hashtable();
String tstamp;
public LinkTracker() {
    tstamp = new Date().toString();
public void doGet(HttpServletRequest request,
                    HttpServletResponse response)
    throws IOException, ServletException {
    String link = request.getParameter("link");
    if (link != null && !link.equals("")) {
      synchronized (links){
        Integer count = (Integer) links.get(link);
        if (count == null) {
          links.put(link, new Integer(1));
        else {
          links.put(link, new Integer(1+count.intValue()));
      //here the servlet redirect the client to the link he clicked
      response.sendRedirect(link);
    else {
      response.setContentType("text/html");
      PrintWriter out = response.getWriter();
      request.getSession();
      out.println("<html>");
      out.println("<head>");
      out.println("<title>Links Tracker Servlet</title>");
      out.println("</head>");
      out.println("<body>");
      out.println("<p>Links Tracked Since");
      out.println(tstamp+":</p>");
      if (links.size() != 0) {
        Enumeration enum = links.keys();
        while (enum.hasMoreElements()) {
          String key = (String)enum.nextElement();
          int count = ((Integer)links.get(key)).intValue();
          out.println(key+" : "+count+" visits<br>");
      else {
        out.println("No links have been tracked!<br>");
      out.println("</body>");
      out.println("</html>");
public void doPost(HttpServletRequest request,
                    HttpServletResponse response)
    throws IOException, ServletException {
    doGet(request, response);
}

Want to delete then reload firefox, but in add/remove programs, i click remove and nothing happens.

Firefox will not work. I want to delete it, then reload it anew. But when I got to add/remove programs and click remove, nothing happens.

I would recommend to download the driver appropriate for your system from the Canon webiste or, after installing it, to run software update and it will detect it for you.
If you have the last driver appropriate for your system, you may wish to reset the printing system. To do this, go to Sys prefs/print and fax and, upon clicking minus button, also press Option/alt key. You will be asked to confirm, do it. Then, add the printer by pressing plus button, it should work now.
But, before doing this, download the last good driver, CDs usually contain outdated drivers.

Video with stereo track and click track for live performance

Hello,
I have a video that was created in FCP sync'd with a stereo sound track and a click track. I need to play this video live (using projection) with the stereo track routed to the main outs and the click routed to the in-ear monitors for a performer to sync with. I have not done this before and am trying to wrap my brain around it. I'm also hoping to come up with the easiest and most reliable solution. As I understand it, this video will not be able to play back from a burned DVD, but rather will need to play back in Logic with 2 audio tracks (L/R) for the sound track and then 1 track for the click. These 3 tracks can then be routed to their required destinations from a soundcard or mixer.
Does this seem to be the best and most reliable method? I've only burned audio to video (never using a click) in FCP before and have always played back from a DVD. Now I have this live player/syncing component and am not sure of the best way to do it. I have some experience with Logic, but limited.
I really appreciate any suggestions/tips any one might have.
Thanks.

I've opened the movie (with stereo track) in QT Pro and then added the click - and now the 2 audio files are there, sync'd up.
When you say you opened the movie in QT Pro, I assume you mean the QT Pro version of Quicktime Player 7. So let's say you have the movie open in Quicktime Player 7, and you press ⌘J (Window > Show Movie Properties). And in the window that appears, hopefully you see several items listed, including Sound Track 1 and Sound Track 2. These are your two audio files, that are now part of the movie file. One of those files is your stereo soundtrack, and the other is your click. So let's assume that this is a total of 3 channels of sound (because I understand your click is mono).
Select Sound Track 1, and select the tab Audio Settings. Let's assume this is the stereo soundtrack. In the scrolling area at the bottom right of the window, under the heading Assignment, you should see Left and Right. Let's leave it that way.
Now select Sound Track 2. Under Assignment, there should be just one item listed (that is, there is only one channel in this Sound Track, if the click is mono). Under Assignment, it probably says Mono. Change that to Center.
Save the movie. We're done with Quicktime Player for now. Launch Audio MIDI Setup. It's here:
Macintosh HD/Applications/Utilities/Audio MIDI Setup
I assume you have an audio interface connected that supports at least 3 channels. In AMS, find the window (or tab, depending on your OS version) for Audio Devices. Select your audio interface. Select the Output tab, and press the button Configure Speakers. In the window that appears, select Multichannel, and change the menu selection from Stereo to 5.1 Surround.
You will probably see that "left front," "right front," and "center" are assigned to outputs 1, 2 and 3, respectively, of your audio interface. If not, make it so, and press the button Apply.
Now when you play your movie, the stereo soundtrack will appear at outputs 1 and 2 of your audio interface, and the click will appear at output 3. Now you can cable your stereo mains to 1/2 and your in-ear monitors to 3.

Can't turn off face tracking on Live! Ultra for Notebooks

Please help! I've installed Live! Ultra for Notebooks and it works reasonably well, except for the fact that I can't turn off the Face Tracking feature.
When I installed everything, I selected "Smart", but I hate the way that the camera keeps panning off to different parts of the room. So, I just want to turn this feature OFF.
But every time I open the Face Tracking Utility, or go to the screen via "Tools," I can click "off". But, it doesn't actually turn off; the camera still keeps panning off to the far corners of the room. And the next time I access the Face Tracking Utility again, it has defaulted back to "Smart". Any suggestions on how to disable this feature?
My system is as follows:
Dell Inspiron 700M
Intel Pentium M 2.00 GHz processor
Windows XP Home Edition, service pack 2
Happy new year & thanks in advance..

Finally figured it out. In case anyone else has the same problem of your computer ignoring changes in the Face Tracking Utility screen, try this:
Go to Webcam Center. Click on "Capture" then the "Source" tab, one of two discrete grey tabs just above the video screen.
Under "Extended Settings" you have the options for face tracking: off, continuous or smart. Click it and your computer should actually hold onto this setting until you change it again!
Good luck.
-noknok

Error message from originating program when clicking on weblink to open FF4

FF4 is now my default browser on my WinXP netbook. (Instead of FF3.6.)
If FF is not open and I click on a weblink in Outlook or other programs, FF4 opens the webpage but I also get an error message in the originating program saying the system cannot find the file. If FF4 is already open I do not get the error message. FF3.6 did not generate this error message even though it took significantly longer to open than FF4.

Hi Srikar,
It depends.
Generally though you display a message in SAPGUI it does not display automatically in BSP.
Some times you have to manually write some code to populate and display a message in BSP.
First you need to find the BSP page and write some code to display error messages in the same..
Regards,
Sreekanth

How to Track Clicks on Buttons, Triggers and Drop-Offs

In my presentation, I want to be able to keep track of every time someone clicks a button and what button they click. I also want to be able to keep track of when people drop off from the presentation. Is this possible with Captivate?
Thanks,
Vince

add a stage covering rectangle to the lowest layer of your external swf and make sure the stage sizes of the loading and loaded swf are the same. convert that shape to a movieclip and assign an instance name (eg, bg_mc). in the actions panel, you can use:
bg_mc._alpha=0;
bg_mc.onRelease=function(){
bg_mc.useHandCursor=false;

Dreamweaver CS6 crashes when clicking live view after Yosemite upgrade

Been using Dreamweaver fine for a while now, upgraded my Mac to Yosemite yesterday, all CS6 app work fine, however opened an xhtml file in Dreamweaver, loads fine, but the second you click the live view button to preview the changes it crashes every time. Tried resetting the prefs for DW. Any known fixes? I need this function to be working ASAP.

sschroeder2013 You are not alone. I updated a while ago and went into Dreamweaver to update a site and I see the same problem above.
Please let us know when you have repaired the problem.
Thanks!

How to execute a java program by clicking !?!?

Just a click to execute a java program?!!
Like the ".exe" in Windows or "x" permission in Unix ?!?!?!
How can I do that?
And how to set a java program file to display as a personal icon? (My Icon)
:-)

Well this is what I do in Windows (I use XP but it works in others):
First you have to make sure all the class files are in the same folder (duh)
Then you copy your java.exe from your jre folder into the folder with all your class files.
Finally, you create a shortcut to java.exe and add your class name to the command line on the shortcut.
Now all you have to do is double click on the shortcut and your program runs. Sure it's not that pretty but it works.

I associate Magnet links to my Vuze program and click "remember my choice" but it does not keep it assoctated anymore. What happened

Every time I click on a magnet link is asks for a program association i set Vuze and click remember. It used to keep the setting but it does not anymore and I have to go through it every time I click on a link. What happened? I think it was it the last update when this started happening but I am not sure. Is there anyway I can manually input the choice so it stays there?

Reset your preferences
Hold down CTRL + SHIFT + ALT keys then start photoshop. Window pops up choose yes.

Not Able to track Click Campaign Event when clicking on an ad which belongs to a campaign

I have made a campaign(WL 4.0) and i have deleted the click product event and display
product event from the list of persisted events through console.Now when i display
and click the ads i am not getting the ClickCampaignEvent generated but only getting
the displayCampaignEvent and sesisonbeginevent(which implies that the behavior
tracking listener is properly registered).What may be the probable reason?

Hi,
maybe you are looking at local universe storage from the rich client ?
C:/Document and Settings/<User Name>/Application Data/Business Objects/Business Objects 12.0/Universes
whereas from infoview, those are those secured from the server?
If however you are connecting your WRC in 3-tier mode, then those would be server .unv
regards,
H

Programmed tracks +click live

Similar Messages

Maybe you are looking for