Programmer Experience with NI-DAQ and VC++

I am looking for a programmer for a short term project.
It uses a high speed digitizer, as well as NI-DAQ hardware.
I would like some programming to be done in VC++
This is a project in the Bay Area, California, USA. Potential applicants must be able to work onsite.
Applicant should have strong experience in C++, Visual Studio, signal processing theory, sampling theory, waveform generation, and experience in using NI-DAQ in a VC++ enviroment.
Email resumes to jobs at intereasemedical.com,reference job IE004
Email/CV/Resume should include dates able to start work, expected billing rate, and summary of experience.

The behavior you describe seems to be how things work in LabView. However, I need to know what values to pass for the sample interval and timebase in the SCAN_start() function. In the documentation for SCAN_start(), there is no mention of automatically setting the interchannel delay.
There is this:
"If scanInterval equals 0, the time that elapses between A/D conversions and the time that elapses between scan sequences are both equal to the sample interval. As soon as the scan sequence has completed, NI-DAQ restarts one sample interval later. Another advantage of setting scanInterval to 0 is that this frees the scan-interval counter, counter 2, for other operations, such as waveform generation or general-purpose counting. This applies to non-E Series
devices only."
Of course, this is NOT what I want, since I need all channels sampled within one scan interval (provided I am parsing the documentation correctly, and that what is going on in this situation is that the interchannel delay = the scan interval... correct me if I'm wrong on this). Anyway, this point is moot since it does not apply to my E-series board.
I've looked over my code a bit, and I see your point about the AI and AO clocks. I can set the AO clock to whatever I want and then just trigger the output using the AI_START_TRIGGER signal. For my purposes, the AI and AO processes do not have to be sync'ed.
Thanks,
Sharad

Similar Messages

Any kind of integration experience with Weblogic JMS and Oracle AQ?

Hi,
In my company I work with java developers who believe in some kind of "holly" database independence I don't understand and as a result my life as a database developer is hell on earth.. Yesterday we again started to discuss, this time where to log, they believe database is slow and prefer logging to filesystem, after some hours finally I could convince them for some operational and reporting needs to use the database and will do this in an asyncronous way whiich they won't get slow. After all I believe the reason for a database is data, this is the place where data lives, and with the correct desing and implementation logging to database would perform better.
I love Oracle features, and know that we paid a lot for this software, so today I started investigating this promised solution. And quickly I found AQ and JMS topics in the documentation :)
After this introduction here is my problem; my company use BEA Weblogic as application server and the java guys want AQ to automatically (but of course with some delay) take their JMS log requests into database tables. Does any one have similar application experience, or any kind of integration experience with Weblogic JMS and Oracle AQ?
Any comments, references, documentation, sample code, url will be most welcomed :)
Thank you very much!
Tonguc
[email protected]
References I found upto now;
Oracle® Streams Advanced Queuing Java API Reference 10g Release 2 (10.2) http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14291/toc.htm
(Packages; javax.jms & oracle.jms)
Oracle® Streams Advanced Queuing User's Guide and Reference 10g Release 2 (10.2) http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14257/toc.htm
Part IV
Using Oracle JMS and Oracle Streams AQPart V describes how to use Oracle JMS and Oracle Streams Advanced Queuing (AQ).
Chapter 11, "Introducing Oracle JMS"
Chapter 12, "Oracle JMS Basic Operations"
Chapter 13, "Oracle JMS Point-to-Point"
Chapter 14, "Oracle JMS Publish/Subscribe"
Chapter 15, "Oracle JMS Shared Interfaces"
Chapter 16, "Oracle JMS Types Examples"
A Sample Code from Otn
http://www.oracle.com/technology/sample_code/tech/java/web_services/jmsws/NewsQueueEJB.java.html

I wouldn't go as far to say Oracle AQ is out-dated today. However, it is indeed a proprietary technology that did not found much main-stream adoption in the earlier years after its introduction. The advent of JMS made it somewhat more useful (or should I say intriguing, because more people are trying to tie it together with other J2EE technologies), but the Oracle's JMS wrapper classes in aqapi.jar were not feature complete for a long while, so using it outside Oracle's application server was painful, if not impossible. I do agree that the info at the dev2dev's JMS newsgroup or in this forum is highly fragmented, as neither Oracle nor BEA provides an official solution to integrate AQ with WebLogic, so people like us have to learn the technology through experimentation and in a piecemeal fashion.
3 years ago I was literally "playing around" - we had a polling mechanism set up to use triggers to write Oracle data changes into an event table, and had a Java-based daemon to scan that table and publish events as JMS messages to the WebLogic JMS server. This continues to work reliably till today, but I was looking for a solution that has few parts - I wanted to hook up my WebLogic MDB directly to AQ as a foreign JMS provider. Although I was able to get it to work (including XA), there were a few hoops I had to jump through, such as decompiling the Oracle AQjms classes to make them bind to the WebLogic JNDI tree.
One year after that Diptanshu Parui took what I did a giant step further - he extended the Oracle AQjms classes to allow them to be bound to the WebLogic JNDI tree naturally, and he figured out how to use WebLogic JMS messging bridge to re-send single-threaded AQ JMS messages to clustered JMS queues, which allow concurrent message assumption by multiple instances of MDB's. My impression is that he is using that setup in a production environment.
I am sure you are aware of it but I would like to make it clear - in order to use AQ as a foreign JMS provider to WebLogic-hosted MDB's, you don't need to update your database to Oracle 10g - Oracle 8i is good enough (although I recommend at least 9i Release 2). It is not the database engine, but rather the aqapi.jar JMS wrapper on top of AQ that matters. I do recommend that you use aqapi.jar from Oracle Application Server 10.0.3 or up for better XA support, among other things. Again, you don't have to replace WebLogic with Oracle AS - you only need a single jar file from it and put it in your WebLogic's classpath. However, I don't know what this means from a licensing point of view if you ever go to production - do you have to pay the full price of OracleAS or OC4J just to use the aqapi.jar?
In the coming days I will test the latest aqapi.jar to see how much progress Oracle has made in terms of making their J2EE products more spec-compliant :-).
Hope the above gives you a different perspective.
Eric

Experience with iPod nano and iPod socks?

After discussing with the Apple Helpline about the scratches on my nano, they quickly proposed to send my some iPod socks for free in order to protect the nano (is this like implicitely admitting that something went wrong?).
My question: Does anybody have experience with iPod socks and the nano, i.e. do they scratch the nano as well (as somebody on another forum has posted)?

lol, good one James. + for you.
I remember this same thing with the iPod Mini. That was released in February 2004 and there were a huge number of cases by around April. But the mini was announced in January which ment the third party makers had a whole month to design and make cases.
The ironic thing....people didnt need a case for the mini. Its was scratch resistant to begin with, however the nano is damaged by finger acid!!!
*nathan
PS: James, off topic, but do you use your iPods for different reasons, as im trying to think of ways to justify having three aswell?

Position for Programmer experience with DAQ and C++/Labview

We are company located in the Bay Area of California and looking for
a programmer experienced with programming (from scratch) DAQ boards for
signal generation (sine/triangle/sawtooth) waveforms as well as DAQ
digitizers, FFT, and data displaying.
You should be
able to program these cards using C++, but should have strong knowledge
of labview as well. You may be asked to translate and migrate labview
VI's to the C++ enviroment.
Job applicants from
the Bay Area, as well as abroad are welcome to apply.Those outside of
the Bay Area can develop code at your own home office and must have
C++/labview on a suitable computer for programming.
Applicants should apply by sending an email to: jobs at intereasemedical dot com and indicate IE002 as the job position code.
Do not post your resume as a reply to this forum post.
Do include your resume in PDF or DOC format
Do
include your billing rate and if you are authorized to work in the U.S
if located in the Bay Area. We do not provide H1B sponsorship.
Responses without the above information will not be considered.
Thank you!

Hello, I have much experience with DAQ, C++ and Labview. How to apply for this position?

New Customer - Have had MISERABLE experience with Verizon service and Customer service

I am a brand new customer of Verizon Fios and so far I have zero good things to say about it. If it wasn't for the aggrevation of switching cable companies, I most definitely would go back to Comcast.
I moved into a new home in the middle of April. The previous owner had Verizon Fios in this house, so there was minimal installation that had to be done when I initially set up my cable. My house was pretty much empty at the time, so we had the TV's set up where we had a place to put it (upstairs, kitchen, and living room). We recently bought bedroom furniture, so we could now move the TV to where we initially wanted it, in our bedroom. However when we tried to hook it up to an outlet, no picture came though. This is when my awful experience with verizon customer service (or lack there of) began.
I took time out of my work day to call Verizon about this problem. I was on hold for about 30 mins until I actually heard a human's voice. He was unable to help me since I was not at home to unplug and plug things back in.
I called again when I was home, this time I was on hold for about 20 mins (wow)... the first person could not help me, so she transferred me to another department... put on hold for 35 mins.... this perosn couldnt help me either and they transferred me back to the SAME DEPARTMENT I WAS INITIALLY TRANSFERRED FROM.... put on hold for about 45 mins... finally i speak with someone that knows what they are talking about. Of course I have to go through all the same steps that I did the first time which did not work. As this person decides I need a technician, he begins to look up available dates... and then after an hour and 35 mins on the phone, it gets disconnected! I wait for 5 minutes to get a call back but I get NOTHING. I spent now 2 hours trying to deal with this and verizon doesnt even call me back when its their phone that gets disconnected? Thats terrible.
I call back after 10 mins and am put on hold right away (obviously).... after 25 mins of being on hold, shocker - the call is disconnected again.
That was enough for one day
I call back again the next day... same old thing... put on hold for 30 mins, talk to one person who cant help me, transferred to another department and put on hold for 20 more mins.
Finally with the tech department who says they are going to schedule a tech to come out to fix the problem but also mentioned they are going to charge me $55 for this! Are you kidding me?????? Verizon wastes about 4 hours of my life and busy day and then has the nerve to say they are going to charge me for it? I asked the person several times if I could speak with a manager or supervisor, they never let me. I asked multiple times and she just said that they wouldnt be able to help me and that the charge would stick.
I can't imagine that anyone would treat a brand new customer like this. I will not recommend Verizon to any one until I see some kind of help or REAL customer service from them.

I did call them this morning, and still on the phone.
I will say this - the reps are very friendly and do try to help in earnest. That's been my experience overall with Verizon. So in terms of the actual people, I give them an A+.
In terms of their system and how they process things, they get a big fat F. The very idea that I sent back a phone with accessories and their warehouse only registered the return of the phone pretty much says that there is something fishy going on there at the warehouse. And it took an hour to sort this out so far and counting.
The thing that bugs me about Verizon is how complicated it is to get everything straightened out.
Right now, they are trying to sort out the activation fee - I already have been charged one and now they are trying to figure out if i have to pay another one. Another 15 minutes just on that.
Everything has been resolved. Thankfully, Verizon's saving grace is that their reps are nice people.

Experience with Solaris 10 and 11 on Oracle VM 3.0.3?

Greetings,
We are trying to confirm with "first hand experience" how/if Oracle VM 3.0.3 supports Solaris 10 and 11 x86. For example, a) does OVM support Solaris as advertised? b) if yes, are there caveats excluding the HVM limitations? c) have you been able to use the Solaris Templates?
Thank you,
Roddy

I ran into the same problem. Tried manually create software raid using the shell (ctrl F2 or F4), but it keeps shutting down the software raid and anaconda would die.
Then I tried to use single disk but with logical volume (also set up manually from the shell). But after the installation, the system would not boot. Looking at the init script content in the initrd, I don't think it supports lvm.
So I went back to square one, using the one disk with no lvm, but customized partition size. Will use raidder to build a raid 1 after this.
Base on this experience installing the server, and also the VM Manager, I think Oracle VM is seriously going downhill. I can't believe how they would hire anyone that writes such poor quality installation scripts and package. Try mounting the VM Manager ISO under /tmp/mnt and install from there and you will see what I mean.
ling

Experiences with Nikon D750 and Aperture

Hi,
a few weeks ago I bought a Nikon D750 – my camera before was a Nikon D700.
All in all I am disappointed about the quality of my photos with the D750 in Aperture – they’re all 14bit RAWs without compression. The problems e. g. are:
- Photos shot with the D750 at low light conditions at home are too much colour saturated - especially there’s too much red in it.
- Contrast is much too high.
- Dark areas are often black without details.
I looked at many of these photos in Adobe’s Lightroom. The RAW intepretation seems a bit better (especially regarding contrast and dark areas) but has other problems (e. g. with skin tones).
I made a few comparision photos with my D750 and the D700. All in all the D700 makes a much better job in home light conditions. You can see more details in the photos, colour saturation and contrast are better.
Can anyone confirm these problems? At the moment I am not sure if it is a problem of the D750 (which is reviewed everywhere so excellent!) or of the CameraRAW interpretation of Apple. Will future Camera RAW updates mabye have better interpretations?
Regards, Ulf

To illustrate, what I mean: I shot today a photo (nothing special) with my lensbaby fisheye lens in low light.
That’s the way the photo looks like in Aperture 3.6 (I tried to improve it a bit):
In Apertue the photo has to much contrast. But reducing it makes the photo ugly. You can also see that dark parts of the photo (not the black) tend to be brown and the transition between black and brown looks terrible.
The Same photo processed and also a bit improved with Lightroom 5.7 looks a lot better:
You can see a lot more details - details you can never get with Aperture.
In my opinion Apple’s camera raw for the Nikon D750 makes a very bad job. A lot of my photos can not good be processed in Aperture.
Does anyone with the D750 make same experiences?

Anyone any experience with Oracle products and TurboLinux?

Hi all,
I would appreciate any thoughts or shared experience with
TurboLinux and any Oracle products - incl. OAS 4, OWAS 3, O8i, O8
and eventually others unknown to me.
Thank you all very much in advance.
P.S> I would appreciate if someone shares any general experience
with TurboLinux - especially NLS support.
null

Hello,
There is a known issue with PDF in 11.1.2.1 . The problem will appear or not according to the PDF viewer used :
ALERT: Reports PDF Problems in 11.1.2.1.0 Patchset for Non-Linux Platforms [ID 1522543.1]
"Interim patches" are available .
Kind regards

Any experience with Illustrator CS2 and MBP?

Hi Everyone!
I read a lot about the performance of Photoshop CS2 with Rosetta, but I would like to know how the Illustrator CS2 works with the new MacBook Pro.
Thanks for your comments!
Gus

I work in prepress at a commercial printer. I have been testing out my MBP 1.8GHz with all CS1 and CS2 apps as well as Quark Xpress 6.5. I also only have 1GB of ram at the moment (second 1GB will arrive today). Anyway all the apps run slower than on my G5 Dual 1.8GHz. That may be due to the slower hard drive speed and lower amount of ram. Most apps take a little longer to launch, but once up and running perform just fine. Acrobat 6 and ID CS2 take the longest to launch. I haven't had any crashes or kernal panics with any of the apps. Quark also works well. Still a bit slow, but very fuctional once up and running. Also Citrix for Mac works as does ApogeeX client 1.27. Overall I have had a better experience with this machine than DC 2.0 GHZ G5. I had kernal panics from the beginning the MBP has had no problems so far. If you need to use a MBP fro serious design or prepress upgrade as much as possible. ie 7200RPM drive and 2GB of ram.

Any experience with Object Types and Forms6i / 9i ???

Has anyone got any experience in working with Object Types and Object Views together with Forms 6i or 9i???
TIA
Rob Zoeteweij

Hi AnneCarmen,
Check this small video, http://project02.businesscatalyst.com/Jing/2012-07-13_0508.swf
This is just an example where I am trying to demonstrate how the html embedded into the frame sticks to only one image and not to all the other images. Also, how to keep the thumbnails. Under menu options you can modify the transition and speed option as per your need.
Regards,
Abhishek Maurya

Experience with "Auto-Complete and Go-Less Prompts"

Hi all,
does anyone have experiences with editing instanceconfig.xml for auto-completing prompts?
Is it buggy? Or are there any kinds of risks?
reference: http://www.peakindicators.com/media_pi/Knowledge/oracle%20bi%2011g%20-%20applying%2011.1.1.6.2%20bp1%20-%20windows.pdf
Please have a look at page 10, it describes how to edit the xml
Thanks

Hi Frank,
I understand the single matching value and expecting move out in single tab for perfect match only. inputComboboxListOfValues selects the entry in one tab [even for single matching value] and user has to press another tab to go to next attribute.
Are you suggesting that it actually moves out to next field in single tab for "single matching value"?
Thanks,
Jai

Experiences with windows vista and latest FATALITY drive

This post is created? for people to post experiences with windows vista 32 bit and the latest fatality drivers!!?Tks?

I have Fatality FPS edition, and I find that the volume keeps fluxuating in media player?during playback of music?with vista. Anyone have any idea how to fix this?

Your experience with Toshiba NB550D and Ubuntu

Hi,
does anyone of you have any practical experience with the laptop NB550D and running Ubuntu 11.04 (like did you have any problems with it )?
Thank you
Message was edited by: ryuuko

Hi, sorry am not in Eu; i live in the US... the mini notebook model I have is NB505-N508BN. I think you should have equivalent models where you live. Just wanted to say that I have been able to successfully install and dual boot between Win 7 Starter and Kubuntu 11.04, on my netbook. In fact, i mostly use Kubuntu now, unless I need to make a backup of my system (which I do from Windows). It works great and I love it. Right now I am posting from a Firefox browser opened in Kubuntu.
I posted a long note and some screenshots of my Kubuntu 11.04 in the Toshiba mini netbooks users forum (US). please see this link if you are interested. Y'all have fun...
Nat
This is the link:
http://forums.toshiba.com/t5/mini-notebooks-NB-series/Kubuntu-Linux-alternative-to-Win7-on-NB505-N508BN/td-p/208954

Experience with profiling products and tools

Hi,
I'd like to get a good tools for profiling an application
running under WebLogic 6.0 on Win 2000. So far searching the
web, I found Borland Optimizeit and Sitraka jprobe. I once
downloaded an evaluation copy of jprobe but I didn't have
sufficient time to really learn how to use it before the license
expired. I fiddled around a little with the the Java built-in
HPROF and a couple of tools to visualize the data. Specifically
HAT and PerfAnal. They both seem buggy and I was only able to
get PerfAnal to work on a simple application. Examining the data
file output from HPROF seems to provide limited or hard to read
information.
If you have experience with a tool that you like, I would very
much like to hear from you. Thanks in advance for your opinions
and insites.
Al Moyer

There are two levels that I'm used to seeing:
Code Profiling (lower level) -
JVM
jProbe
optimizit
etc.
Performance Management (higher level) -
Precise Indepth
Wily Introscope
Sitraka ??? (new product I can't remember the name)
Peace,
Cameron Purdy
Tangosol, Inc.
Clustering Weblogic? You're either using Coherence, or you should be!
Download a Tangosol Coherence eval today at http://www.tangosol.com/
"Alan Moyer" <[email protected]> wrote in message
news:3c99e72b$[email protected]..
>
Hi,
I'd like to get a good tools for profiling an application
running under WebLogic 6.0 on Win 2000. So far searching the
web, I found Borland Optimizeit and Sitraka jprobe. I once
downloaded an evaluation copy of jprobe but I didn't have
sufficient time to really learn how to use it before the license
expired. I fiddled around a little with the the Java built-in
HPROF and a couple of tools to visualize the data. Specifically
HAT and PerfAnal. They both seem buggy and I was only able to
get PerfAnal to work on a simple application. Examining the data
file output from HPROF seems to provide limited or hard to read
information.
If you have experience with a tool that you like, I would very
much like to hear from you. Thanks in advance for your opinions
and insites.
Al Moyer

HT5071 If you have had a book published through IBooks Author, what has been your overall experience with the process and the company?

I am interested in publishing a children's book through IAuthor. What has been your experience with the company? As a first time author, what pitfall should I avoid? Can I learn about the terms of the contract before entering into an agreement?

gvgw wrote:
Can I learn about the terms of the contract before entering into an agreement?
Naturally. Once you apply for an account, you'll get the contract, which you are then free to accept or not.
Michi.

Programmer Experience with NI-DAQ and VC++

Similar Messages

Maybe you are looking for